diff options
author | Bram Moolenaar <Bram@vim.org> | 2018-07-15 20:20:18 +0200 |
---|---|---|
committer | Bram Moolenaar <Bram@vim.org> | 2018-07-15 20:20:18 +0200 |
commit | b477af2260d9bc7ae7f743f0a14265d7ee12ee09 (patch) | |
tree | 0f0bf173f95162a2234265ee8394a6f308cef984 /runtime/tutor/tutor.utf-8 | |
parent | 2196bca7377ff245866cc3cee65b0adb48432ac3 (diff) |
Update runtime files.
Diffstat (limited to 'runtime/tutor/tutor.utf-8')
-rw-r--r-- | runtime/tutor/tutor.utf-8 | 80 |
1 files changed, 40 insertions, 40 deletions
diff --git a/runtime/tutor/tutor.utf-8 b/runtime/tutor/tutor.utf-8 index 2afefbb533..c076e3bfdc 100644 --- a/runtime/tutor/tutor.utf-8 +++ b/runtime/tutor/tutor.utf-8 @@ -19,7 +19,7 @@ properly. If you only read the text, you will forget the commands! Now, make sure that your Caps-Lock key is NOT depressed and press - the j key enough times to move the cursor so that Lesson 1.1 + the j key enough times to move the cursor so that lesson 1.1 completely fills the screen. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Lesson 1.1: MOVING THE CURSOR @@ -36,7 +36,7 @@ 2. Hold down the down key (j) until it repeats. Now you know how to move to the next lesson. - 3. Using the down key, move to Lesson 1.2. + 3. Using the down key, move to lesson 1.2. NOTE: If you are ever unsure about something you typed, press <ESC> to place you in Normal mode. Then retype the command you wanted. @@ -64,7 +64,7 @@ NOTE: The cursor keys should also work. But using hjkl you will be able to NOTE: :q! <ENTER> discards any changes you made. In a few lessons you will learn how to save the changes to a file. - 5. Move the cursor down to Lesson 1.3. + 5. Move the cursor down to lesson 1.3. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -84,7 +84,7 @@ NOTE: :q! <ENTER> discards any changes you made. In a few lessons you ---> The ccow jumpedd ovverr thhe mooon. - 5. Now that the line is correct, go on to Lesson 1.4. + 5. Now that the line is correct, go on to lesson 1.4. NOTE: As you go through this tutor, do not try to memorize, learn by usage. @@ -126,7 +126,7 @@ NOTE: As you go through this tutor, do not try to memorize, learn by usage. 3. As the text has been appended press <ESC> to return to Normal mode. - 4. Move the cursor to the second line marked ---> and repeat + 4. Move the cursor to the second line marked ---> and repeat steps 2 and 3 to correct this sentence. ---> There is some text missing from th @@ -152,13 +152,13 @@ NOTE: As you go through this tutor, do not try to memorize, learn by usage. 3. Insert and delete text as you learned in the previous lessons. - 4. Save the file with changes and exit Vim with: :wq <ENTER> + 4. Save the file with changes and exit Vim with: :wq <ENTER> 5. If you have quit vimtutor in step 1 restart the vimtutor and move down to the following summary. 6. After reading the above steps and understanding them: do it. - + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Lesson 1 SUMMARY @@ -180,7 +180,7 @@ NOTE: As you go through this tutor, do not try to memorize, learn by usage. NOTE: Pressing <ESC> will place you in Normal mode or will cancel an unwanted and partially completed command. -Now continue with Lesson 2. +Now continue with lesson 2. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Lesson 2.1: DELETION COMMANDS @@ -202,7 +202,7 @@ Now continue with Lesson 2. ---> There are a some words fun that don't belong paper in this sentence. - 5. Repeat steps 3 and 4 until the sentence is correct and go to Lesson 2.2. + 5. Repeat steps 3 and 4 until the sentence is correct and go to lesson 2.2. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -222,7 +222,7 @@ Now continue with Lesson 2. ---> Somebody typed the end of this line twice. end of this line twice. - 5. Move on to Lesson 2.3 to understand what is happening. + 5. Move on to lesson 2.3 to understand what is happening. @@ -257,7 +257,7 @@ NOTE: Pressing just the motion while in Normal mode without an operator will ** Typing a number before a motion repeats it that many times. ** - 1. Move the cursor to the start of the line marked ---> below. + 1. Move the cursor to the start of the line below marked --->. 2. Type 2w to move the cursor two words forward. @@ -269,7 +269,7 @@ NOTE: Pressing just the motion while in Normal mode without an operator will ---> This is just a line with words you can move around in. - 6. Move on to Lesson 2.5. + 6. Move on to lesson 2.5. @@ -286,10 +286,10 @@ NOTE: Pressing just the motion while in Normal mode without an operator will 1. Move the cursor to the first UPPER CASE word in the line marked --->. - 2. Type d2w to delete the two UPPER CASE words + 2. Type d2w to delete the two UPPER CASE words. 3. Repeat steps 1 and 2 with a different count to delete the consecutive - UPPER CASE words with one command + UPPER CASE words with one command. ---> this ABC DE line FGHI JK LMN OP of words is Q RS TUV cleaned up. @@ -338,7 +338,7 @@ NOTE: Pressing just the motion while in Normal mode without an operator will ---> Fiix the errors oon thhis line and reeplace them witth undo. - 8. These are very useful commands. Now move on to the Lesson 2 Summary. + 8. These are very useful commands. Now move on to the lesson 2 Summary. @@ -372,7 +372,7 @@ NOTE: Pressing just the motion while in Normal mode without an operator will ** Type p to put previously deleted text after the cursor. ** - 1. Move the cursor to the first ---> line below. + 1. Move the cursor to the first line below marked --->. 2. Type dd to delete the line and store it in a Vim register. @@ -406,7 +406,7 @@ NOTE: Pressing just the motion while in Normal mode without an operator will ---> Whan this lime was tuoed in, someone presswd some wrojg keys! ---> When this line was typed in, someone pressed some wrong keys! - 5. Now move on to Lesson 3.3. + 5. Now move on to lesson 3.3. NOTE: Remember that you should be learning by doing, not memorization. @@ -447,7 +447,7 @@ Notice that ce deletes the word and places you in Insert mode. 2. The motions are the same, such as w (word) and $ (end of line). - 3. Move to the first line below marked --->. + 3. Move the cursor to the first line below marked --->. 4. Move the cursor to the first error. @@ -558,7 +558,7 @@ NOTE: This is very useful in debugging a program with unmatched parentheses! 1. Move the cursor to the line below marked --->. - 2. Type :s/thee/the <ENTER> . Note that this command only changes the + 2. Type :s/thee/the <ENTER> . Note that this command only changes the first occurrence of "thee" in the line. 3. Now type :s/thee/the/g . Adding the g flag means to substitute @@ -623,7 +623,7 @@ NOTE: All : commands must be finished by hitting <ENTER> Lesson 5.2: MORE ON WRITING FILES - ** To save the changes made to the text, type :w FILENAME. ** + ** To save the changes made to the text, type :w FILENAME ** 1. Type :!dir or :!ls to get a listing of your directory. You already know you must hit <ENTER> after this. @@ -638,7 +638,7 @@ NOTE: All : commands must be finished by hitting <ENTER> NOTE: If you were to exit Vim and start it again with vim TEST , the file would be an exact copy of the tutor when you saved it. - 5. Now remove the file by typing (MS-DOS): :!del TEST + 5. Now remove the file by typing (Windows): :!del TEST or (Unix): :!rm TEST @@ -673,7 +673,7 @@ NOTE: Pressing v starts Visual selection. You can move the cursor around 1. Place the cursor just above this line. -NOTE: After executing Step 2 you will see text from Lesson 5.3. Then move +NOTE: After executing Step 2 you will see text from lesson 5.3. Then move DOWN to see this lesson again. 2. Now retrieve your TEST file using the command :r TEST where TEST is @@ -681,7 +681,7 @@ NOTE: After executing Step 2 you will see text from Lesson 5.3. Then move The file you retrieve is placed below the cursor line. 3. To verify that a file was retrieved, cursor back and notice that there - are now two copies of Lesson 5.3, the original and the file version. + are now two copies of lesson 5.3, the original and the file version. NOTE: You can also read the output of an external command. For example, :r !ls reads the output of the ls command and puts it below the @@ -695,7 +695,7 @@ NOTE: You can also read the output of an external command. For example, 1. :!command executes an external command. Some useful examples are: - (MS-DOS) (Unix) + (Windows) (Unix) :!dir :!ls - shows a directory listing. :!del FILENAME :!rm FILENAME - removes file FILENAME. @@ -717,7 +717,7 @@ NOTE: You can also read the output of an external command. For example, ** Type o to open a line below the cursor and place you in Insert mode. ** - 1. Move the cursor to the line below marked --->. + 1. Move the cursor to the first line below marked --->. 2. Type the lowercase letter o to open up a line BELOW the cursor and place you in Insert mode. @@ -740,8 +740,8 @@ NOTE: You can also read the output of an external command. For example, ** Type a to insert text AFTER the cursor. ** - 1. Move the cursor to the start of the line below marked --->. - + 1. Move the cursor to the start of the first line below marked --->. + 2. Press e until the cursor is on the end of li . 3. Type an a (lowercase) to append text AFTER the cursor. @@ -750,7 +750,7 @@ NOTE: You can also read the output of an external command. For example, mode. 5. Use e to move to the next incomplete word and repeat steps 3 and 4. - + ---> This li will allow you to pract appendi text to a line. ---> This line will allow you to practice appending text to a line. @@ -786,10 +786,10 @@ NOTE: Replace mode is like Insert mode, but every typed character deletes an ** Use the y operator to copy text and p to paste it ** - 1. Go to the line marked with ---> below and place the cursor after "a)". - + 1. Move to the line below marked ---> and place the cursor after "a)". + 2. Start Visual mode with v and move the cursor to just before "first". - + 3. Type y to yank (copy) the highlighted text. 4. Move the cursor to the end of the next line: j$ @@ -802,14 +802,14 @@ NOTE: Replace mode is like Insert mode, but every typed character deletes an ---> a) this is the first item. b) - NOTE: you can also use y as an operator; yw yanks one word. + NOTE: You can also use y as an operator; yw yanks one word. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Lesson 6.5: SET OPTION ** Set an option so a search or substitute ignores case ** - 1. Search for 'ignore' by entering: /ignore <ENTER> + 1. Search for 'ignore' by entering: /ignore <ENTER> Repeat several times by pressing n . 2. Set the 'ic' (Ignore case) option by entering: :set ic @@ -823,9 +823,9 @@ NOTE: Replace mode is like Insert mode, but every typed character deletes an 6. To disable ignoring case enter: :set noic -NOTE: To remove the highlighting of matches enter: :nohlsearch +NOTE: To remove the highlighting of matches enter: :nohlsearch NOTE: If you want to ignore case for just one search command, use \c - in the phrase: /ignore\c <ENTER> + in the phrase: /ignore\c <ENTER> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Lesson 6 SUMMARY @@ -883,7 +883,7 @@ NOTE: If you want to ignore case for just one search command, use \c 1. Start editing the "vimrc" file. This depends on your system: :e ~/.vimrc for Unix - :e $VIM/_vimrc for MS-Windows + :e $VIM/_vimrc for Windows 2. Now read the example "vimrc" file contents: :r $VIMRUNTIME/vimrc_example.vim @@ -909,7 +909,7 @@ NOTE: If you want to ignore case for just one search command, use \c 4. Press CTRL-D and Vim will show a list of commands that start with "e". - 5. Press <TAB> and Vim will complete the command name to ":edit". + 5. Type d<TAB> and Vim will complete the command name to ":edit". 6. Now add a space and the start of an existing file name: :edit FIL @@ -922,13 +922,13 @@ NOTE: Completion works for many commands. Just try pressing CTRL-D and Lesson 7 SUMMARY - 1. Type :help or press <F1> or <Help> to open a help window. + 1. Type :help or press <F1> or <HELP> to open a help window. 2. Type :help cmd to find help on cmd . - 3. Type CTRL-W CTRL-W to jump to another window + 3. Type CTRL-W CTRL-W to jump to another window. - 4. Type :q to close the help window + 4. Type :q to close the help window. 5. Create a vimrc startup script to keep your preferred settings. |