tmux - Mirror of https://github.com/tmux/tmux

Age	Commit message (Collapse)	Author
2021-08-21	Add args parsing callback for some future work, currently unused.	nicm

2021-08-13	Change focus to be driven by events rather than walking all panes at end	nicm
	of event loop, this way the ordering of in and out can be enforced. GitHub issue 2808.
2021-03-11	Add split-window -Z to start the pane zoomed, GitHub issue 2591.	nicm

2020-06-05	Change how panes are resized so that the code is clearer and if the pane	nicm
	is resized multiple times during one event loop, it is forced to resize at the end. Also don't zoom/unzoom in switch-client if the pane hasn't changed. GitHub issue 2260.
2020-05-16	Change the existing client flags for control mode to apply for any	nicm
	client, use the same mechanism for the read-only flag and add an ignore-size flag. refresh-client -F has become -f (-F stays for backwards compatibility) and attach-session and switch-client now have -f flags also. A new format "client_flags" lists the flags and is shown by list-clients by default. This separates the read-only flag from "ignore size" behaviour (new ignore-size) flag - both behaviours are useful in different circumstances. attach -r and switchc -r remain and set or toggle both flags together.
2020-04-13	Make client -c and -t handling common in cmd-queue.c and try to be	nicm
	clearer about whether the client is the target client (must have a session) or not.
2020-04-13	Move cmdq_state into cmd-queue.c.	nicm

2020-04-13	Rename cmdq_shared to cmdq_state which will better reflect what it is	nicm
	(going to be) used for.
2020-04-13	Also move cmdq_item and cmdq_list into cmd-queue.c (this is to make its	nicm
	use more clearly defined and preparation for some future work).
2020-04-13	Make struct cmd local to cmd.c and move it out of tmux.h.	nicm

2020-04-09	Some more, and use of wp->window before wp NULL check in format.c.	nicm

2020-03-06	Update latest client for target session on switch-client.	nicm

2019-08-14	Add -Z flag to rotate-window, select-pane, swap-pane, switch-client to	nicm
	preserve zoomed state. GitHub issue 1839.
2019-04-17	Document that switch-client can change all of session,window,pane and	nicm
	check for % in the target as well as ":.".
2019-04-17	Break new window and pane creation common code from various commands and	nicm
	window.c into a separate file spawn.c.
2018-11-06	Correctly unzoom and redraw panes in switch-client.	nicm

2018-10-18	Support for windows larger than visible on the attached client. This has	nicm
	been a limitation for a long time. There are two new options, window-size and default-size, and a new command, resize-window. The force-width and force-height options and the session_width and session_height formats have been removed. The new window-size option tells tmux how to work out the size of windows: largest means it picks the size of the largest session, smallest the smallest session (similar to the old behaviour) and manual means that it does not automatically resize windows. The default is currently largest but this may change. aggressive-resize modifies the choice of session for largest and smallest as it did before. If a window is in a session attached to a client that is too small, only part of the window is shown. tmux attempts to keep the cursor visible, so the part of the window displayed is changed as the cursor moves (with a small delay, to try and avoid excess redrawing when applications redraw status lines or similar that are not currently visible). The offset of the visible portion of the window is shown in status-right. Drawing windows which are larger than the client is not as efficient as those which fit, particularly when the cursor moves, so it is recommended to avoid using this on slow machines or networks (set window-size to smallest or manual). The resize-window command can be used to resize a window manually. If it is used, the window-size option is automatically set to manual for the window (undo this with "setw -u window-size"). resize-window works in a similar way to resize-pane (-U -D -L -R -x -y flags) but also has -a and -A flags. -a sets the window to the size of the smallest client (what it would be if window-size was smallest) and -A the largest. For the same behaviour as force-width or force-height, use resize-window -x or -y, and "setw -u window-size" to revert to automatic sizing.. If the global window-size option is set to manual, the default-size option is used for new windows. If -x or -y is used with new-session, that sets the default-size option for the new session. The maximum size of a window is 10000x10000. But expect applications to complain and much higher memory use if making a window excessively big. The minimum size is the size required for the current layout including borders. The refresh-client command can be used to pan around a window, -U -D -L -R moves up, down, left or right and -c returns to automatic cursor tracking. The position is reset when the current window is changed.
2017-08-30	Pass flags into cmd_find_from_* to fix prefer-unattached, reported by	nicm
	Thomas Sattler.
2017-05-04	Some new notifications, mainly for active pane and current window and	nicm
	session: pane-mode-changed window-pane-changed client-session-changed session-window-changed From Joshua Brot.
2017-04-22	Get rid of the extra layer of flags and cmd_prepare() and just store the	nicm
	CMD_FIND_* flags in the cmd_entry and call it for the command. Commands with special requirements call it themselves and update the target for hooks to use.
2017-04-22	Mouse bindings and hooks set up an initial current state when running a	nicm
	command. This is used for the session, window and pane for all commands in the command sequence if there is no -t or -s. However, using it for all commands in the command sequence means that if the active pane or current session is changed, subsequent commands still use the previous state. So make commands which explicitly change the current state (such as neww and selectp) update it themselves for later commands. Commands which may invalidate the state (like killp) are already OK because an invalid state will be ignored. Also fill in the current state for all key bindings rather than just the mouse, so that any omissions are easier to spot.
2017-04-21	Store state shared between multiple commands in the queue in a shared	nicm
	structure.
2017-02-06	Cancel key table when switching session, unless the key is going to	nicm
	repeat. Reported by Amos Bird.
2017-01-28	Do not clear the key table when changing session on a client, so that	nicm
	switch-client and friends work with bind -n.
2017-01-24	Make update-environment an array as well.	nicm

2017-01-06	Nits found with clang.	nicm

2016-10-16	Mass rename struct cmd_q to struct cmdq_item and related.	nicm

2016-10-10	Add static in cmd-* and fix a few other nits.	nicm

2016-01-19	I no longer use my SourceForge address so replace it.	nicm

2015-12-23	Repair switch-client -l and switch-client with a window target.	nicm

2015-12-14	Instead of combined flags for -c, -s, -t, split into different sets	nicm
	using an enum and simplify the parsing code.
2015-12-13	Use member names in cmd_entry definitions so I stop getting confused	nicm
	about the order.
2015-12-13	Instead of every command resolving the target (-t or -s) itself, prepare	nicm
	the state (client, session, winlink, pane) for it it before entering the command. Each command provides some flags that tell the prepare step what it is expecting. This is a requirement for having hooks on commands (for example, if you hook "select-window -t1:2", the hook command should to operate on window 1:2 not whatever it thinks is the current window), and should allow some other target improvements. The old cmd_find_* functions remain for the moment but that layer will be dropped later. Joint work with Thomas Adam.
2015-12-12	Add key-table option to set the default key table for a session, allows	nicm
	different key bindings for different sessions and a few other things.
2015-12-12	Return after changing key table.	nicm

2015-12-11	Check alerts when session changes, from Patrick Palka.	nicm

2015-12-08	Use ^= instead of a verbose alternative. ok nicm@	mmcc

2015-10-28	Like options, move the environ struct into environ.c.	nicm

2015-10-27	Move struct options into options.c.	nicm

2015-09-22	Don't update last session when the session is unchanged, from Sina Siadat.	nicm

2015-09-10	Add session_last_attached time and format, from Sina Siadat.	nicm

2015-08-28	Make session_update_activity more useful and use it in more places.	nicm

2015-08-28	Run status update on a per-client timer at status-interval.	nicm

2015-07-06	Update environment with -E when attach-session used on an already	nicm
	attached session or switch-client used on the current session. From Cam Hutchison.
2015-06-07	Add -E flag when attaching or switching client to bypass	nicm
	update-environment, from Steven Lu.
2015-05-07	Update environment when switching sessions as well as attaching, from Si	nicm
	Beaumont.
2015-04-25	Move the functions to convert ids from strings into session.c and window.c.	nicm

2015-04-20	Support for multiple key tables to commands to be bound to sequences of	nicm
	keys. The default key bindings become the "prefix" table and -n the "root" table. Keys may be bound in new tables with bind -T and switch-client -T used to specify the table in which the next key should be looked up. Based on a diff from Keith Amling.
2014-10-20	Instead of setting up the default keys by building the key struct	nicm
	directly with a helper function in the cmd_entry, include a table of bind-key commands and pass them through the command parser and a temporary cmd_q. As well as being smaller, this will allow default bindings to be command sequences which will probably be needed soon.
2014-04-17	Remove the "info" message mechanism, this was only used for about five	nicm
	mostly useless and annoying messages. Change those commands to silence on success like all the others. Still accept the -q command line flag and "quiet" server option for now.