Make it build/run on Linux.

5 files changed, 1386 insertions, 0 deletions

diff --git a/compat/queue.h b/compat/queue.h
new file mode 100644
index 00000000..1d46283b
--- /dev/null
+++ b/compat/queue.h
@@ -0,0 +1,528 @@
+/* $Id: queue.h,v 1.1 2007-10-31 14:26:26 nicm Exp $ */
+/*	$OpenBSD: queue.h,v 1.31 2005/11/25 08:06:25 otto Exp $	*/
+/*	$NetBSD: queue.h,v 1.11 1996/05/16 05:17:14 mycroft Exp $	*/
+
+/*
+ * Copyright (c) 1991, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)queue.h	8.5 (Berkeley) 8/20/94
+ */
+
+#ifndef	_SYS_QUEUE_H_
+#define	_SYS_QUEUE_H_
+
+/*
+ * This file defines five types of data structures: singly-linked lists,
+ * lists, simple queues, tail queues, and circular queues.
+ *
+ *
+ * A singly-linked list is headed by a single forward pointer. The elements
+ * are singly linked for minimum space and pointer manipulation overhead at
+ * the expense of O(n) removal for arbitrary elements. New elements can be
+ * added to the list after an existing element or at the head of the list.
+ * Elements being removed from the head of the list should use the explicit
+ * macro for this purpose for optimum efficiency. A singly-linked list may
+ * only be traversed in the forward direction.  Singly-linked lists are ideal
+ * for applications with large datasets and few or no removals or for
+ * implementing a LIFO queue.
+ *
+ * A list is headed by a single forward pointer (or an array of forward
+ * pointers for a hash table header). The elements are doubly linked
+ * so that an arbitrary element can be removed without a need to
+ * traverse the list. New elements can be added to the list before
+ * or after an existing element or at the head of the list. A list
+ * may only be traversed in the forward direction.
+ *
+ * A simple queue is headed by a pair of pointers, one the head of the
+ * list and the other to the tail of the list. The elements are singly
+ * linked to save space, so elements can only be removed from the
+ * head of the list. New elements can be added to the list before or after
+ * an existing element, at the head of the list, or at the end of the
+ * list. A simple queue may only be traversed in the forward direction.
+ *
+ * A tail queue is headed by a pair of pointers, one to the head of the
+ * list and the other to the tail of the list. The elements are doubly
+ * linked so that an arbitrary element can be removed without a need to
+ * traverse the list. New elements can be added to the list before or
+ * after an existing element, at the head of the list, or at the end of
+ * the list. A tail queue may be traversed in either direction.
+ *
+ * A circle queue is headed by a pair of pointers, one to the head of the
+ * list and the other to the tail of the list. The elements are doubly
+ * linked so that an arbitrary element can be removed without a need to
+ * traverse the list. New elements can be added to the list before or after
+ * an existing element, at the head of the list, or at the end of the list.
+ * A circle queue may be traversed in either direction, but has a more
+ * complex end of list detection.
+ *
+ * For details on the use of these macros, see the queue(3) manual page.
+ */
+
+#ifdef QUEUE_MACRO_DEBUG
+#define _Q_INVALIDATE(a) (a) = ((void *)-1)
+#else
+#define _Q_INVALIDATE(a)
+#endif
+
+/*
+ * Singly-linked List definitions.
+ */
+#define SLIST_HEAD(name, type)						\
+struct name {								\
+	struct type *slh_first;	/* first element */			\
+}
+
+#define	SLIST_HEAD_INITIALIZER(head)					\
+	{ NULL }
+
+#define SLIST_ENTRY(type)						\
+struct {								\
+	struct type *sle_next;	/* next element */			\
+}
+
+/*
+ * Singly-linked List access methods.
+ */
+#define	SLIST_FIRST(head)	((head)->slh_first)
+#define	SLIST_END(head)		NULL
+#define	SLIST_EMPTY(head)	(SLIST_FIRST(head) == SLIST_END(head))
+#define	SLIST_NEXT(elm, field)	((elm)->field.sle_next)
+
+#define	SLIST_FOREACH(var, head, field)					\
+	for((var) = SLIST_FIRST(head);					\
+	    (var) != SLIST_END(head);					\
+	    (var) = SLIST_NEXT(var, field))
+
+#define	SLIST_FOREACH_PREVPTR(var, varp, head, field)			\
+	for ((varp) = &SLIST_FIRST((head));				\
+	    ((var) = *(varp)) != SLIST_END(head);			\
+	    (varp) = &SLIST_NEXT((var), field))
+
+/*
+ * Singly-linked List functions.
+ */
+#define	SLIST_INIT(head) {						\
+	SLIST_FIRST(head) = SLIST_END(head);				\
+}
+
+#define	SLIST_INSERT_AFTER(slistelm, elm, field) do {			\
+	(elm)->field.sle_next = (slistelm)->field.sle_next;		\
+	(slistelm)->field.sle_next = (elm);				\
+} while (0)
+
+#define	SLIST_INSERT_HEAD(head, elm, field) do {			\
+	(elm)->field.sle_next = (head)->slh_first;			\
+	(head)->slh_first = (elm);					\
+} while (0)
+
+#define	SLIST_REMOVE_NEXT(head, elm, field) do {			\
+	(elm)->field.sle_next = (elm)->field.sle_next->field.sle_next;	\
+} while (0)
+
+#define	SLIST_REMOVE_HEAD(head, field) do {				\
+	(head)->slh_first = (head)->slh_first->field.sle_next;		\
+} while (0)
+
+#define SLIST_REMOVE(head, elm, type, field) do {			\
+	if ((head)->slh_first == (elm)) {				\
+		SLIST_REMOVE_HEAD((head), field);			\
+	} else {							\
+		struct type *curelm = (head)->slh_first;		\
+									\
+		while (curelm->field.sle_next != (elm))			\
+			curelm = curelm->field.sle_next;		\
+		curelm->field.sle_next =				\
+		    curelm->field.sle_next->field.sle_next;		\
+		_Q_INVALIDATE((elm)->field.sle_next);			\
+	}								\
+} while (0)
+
+/*
+ * List definitions.
+ */
+#define LIST_HEAD(name, type)						\
+struct name {								\
+	struct type *lh_first;	/* first element */			\
+}
+
+#define LIST_HEAD_INITIALIZER(head)					\
+	{ NULL }
+
+#define LIST_ENTRY(type)						\
+struct {								\
+	struct type *le_next;	/* next element */			\
+	struct type **le_prev;	/* address of previous next element */	\
+}
+
+/*
+ * List access methods
+ */
+#define	LIST_FIRST(head)		((head)->lh_first)
+#define	LIST_END(head)			NULL
+#define	LIST_EMPTY(head)		(LIST_FIRST(head) == LIST_END(head))
+#define	LIST_NEXT(elm, field)		((elm)->field.le_next)
+
+#define LIST_FOREACH(var, head, field)					\
+	for((var) = LIST_FIRST(head);					\
+	    (var)!= LIST_END(head);					\
+	    (var) = LIST_NEXT(var, field))
+
+/*
+ * List functions.
+ */
+#define	LIST_INIT(head) do {						\
+	LIST_FIRST(head) = LIST_END(head);				\
+} while (0)
+
+#define LIST_INSERT_AFTER(listelm, elm, field) do {			\
+	if (((elm)->field.le_next = (listelm)->field.le_next) != NULL)	\
+		(listelm)->field.le_next->field.le_prev =		\
+		    &(elm)->field.le_next;				\
+	(listelm)->field.le_next = (elm);				\
+	(elm)->field.le_prev = &(listelm)->field.le_next;		\
+} while (0)
+
+#define	LIST_INSERT_BEFORE(listelm, elm, field) do {			\
+	(elm)->field.le_prev = (listelm)->field.le_prev;		\
+	(elm)->field.le_next = (listelm);				\
+	*(listelm)->field.le_prev = (elm);				\
+	(listelm)->field.le_prev = &(elm)->field.le_next;		\
+} while (0)
+
+#define LIST_INSERT_HEAD(head, elm, field) do {				\
+	if (((elm)->field.le_next = (head)->lh_first) != NULL)		\
+		(head)->lh_first->field.le_prev = &(elm)->field.le_next;\
+	(head)->lh_first = (elm);					\
+	(elm)->field.le_prev = &(head)->lh_first;			\
+} while (0)
+
+#define LIST_REMOVE(elm, field) do {					\
+	if ((elm)->field.le_next != NULL)				\
+		(elm)->field.le_next->field.le_prev =			\
+		    (elm)->field.le_prev;				\
+	*(elm)->field.le_prev = (elm)->field.le_next;			\
+	_Q_INVALIDATE((elm)->field.le_prev);				\
+	_Q_INVALIDATE((elm)->field.le_next);				\
+} while (0)
+
+#define LIST_REPLACE(elm, elm2, field) do {				\
+	if (((elm2)->field.le_next = (elm)->field.le_next) != NULL)	\
+		(elm2)->field.le_next->field.le_prev =			\
+		    &(elm2)->field.le_next;				\
+	(elm2)->field.le_prev = (elm)->field.le_prev;			\
+	*(elm2)->field.le_prev = (elm2);				\
+	_Q_INVALIDATE((elm)->field.le_prev);				\
+	_Q_INVALIDATE((elm)->field.le_next);				\
+} while (0)
+
+/*
+ * Simple queue definitions.
+ */
+#define SIMPLEQ_HEAD(name, type)					\
+struct name {								\
+	struct type *sqh_first;	/* first element */			\
+	struct type **sqh_last;	/* addr of last next element */		\
+}
+
+#define SIMPLEQ_HEAD_INITIALIZER(head)					\
+	{ NULL, &(head).sqh_first }
+
+#define SIMPLEQ_ENTRY(type)						\
+struct {								\
+	struct type *sqe_next;	/* next element */			\
+}
+
+/*
+ * Simple queue access methods.
+ */
+#define	SIMPLEQ_FIRST(head)	    ((head)->sqh_first)
+#define	SIMPLEQ_END(head)	    NULL
+#define	SIMPLEQ_EMPTY(head)	    (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head))
+#define	SIMPLEQ_NEXT(elm, field)    ((elm)->field.sqe_next)
+
+#define SIMPLEQ_FOREACH(var, head, field)				\
+	for((var) = SIMPLEQ_FIRST(head);				\
+	    (var) != SIMPLEQ_END(head);					\
+	    (var) = SIMPLEQ_NEXT(var, field))
+
+/*
+ * Simple queue functions.
+ */
+#define	SIMPLEQ_INIT(head) do {						\
+	(head)->sqh_first = NULL;					\
+	(head)->sqh_last = &(head)->sqh_first;				\
+} while (0)
+
+#define SIMPLEQ_INSERT_HEAD(head, elm, field) do {			\
+	if (((elm)->field.sqe_next = (head)->sqh_first) == NULL)	\
+		(head)->sqh_last = &(elm)->field.sqe_next;		\
+	(head)->sqh_first = (elm);					\
+} while (0)
+
+#define SIMPLEQ_INSERT_TAIL(head, elm, field) do {			\
+	(elm)->field.sqe_next = NULL;					\
+	*(head)->sqh_last = (elm);					\
+	(head)->sqh_last = &(elm)->field.sqe_next;			\
+} while (0)
+
+#define SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do {		\
+	if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\
+		(head)->sqh_last = &(elm)->field.sqe_next;		\
+	(listelm)->field.sqe_next = (elm);				\
+} while (0)
+
+#define SIMPLEQ_REMOVE_HEAD(head, field) do {			\
+	if (((head)->sqh_first = (head)->sqh_first->field.sqe_next) == NULL) \
+		(head)->sqh_last = &(head)->sqh_first;			\
+} while (0)
+
+/*
+ * Tail queue definitions.
+ */
+#define TAILQ_HEAD(name, type)						\
+struct name {								\
+	struct type *tqh_first;	/* first element */			\
+	struct type **tqh_last;	/* addr of last next element */		\
+}
+
+#define TAILQ_HEAD_INITIALIZER(head)					\
+	{ NULL, &(head).tqh_first }
+
+#define TAILQ_ENTRY(type)						\
+struct {								\
+	struct type *tqe_next;	/* next element */			\
+	struct type **tqe_prev;	/* address of previous next element */	\
+}
+
+/*
+ * tail queue access methods
+ */
+#define	TAILQ_FIRST(head)		((head)->tqh_first)
+#define	TAILQ_END(head)			NULL
+#define	TAILQ_NEXT(elm, field)		((elm)->field.tqe_next)
+#define TAILQ_LAST(head, headname)					\
+	(*(((struct headname *)((head)->tqh_last))->tqh_last))
+/* XXX */
+#define TAILQ_PREV(elm, headname, field)				\
+	(*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
+#define	TAILQ_EMPTY(head)						\
+	(TAILQ_FIRST(head) == TAILQ_END(head))
+
+#define TAILQ_FOREACH(var, head, field)					\
+	for((var) = TAILQ_FIRST(head);					\
+	    (var) != TAILQ_END(head);					\
+	    (var) = TAILQ_NEXT(var, field))
+
+#define TAILQ_FOREACH_REVERSE(var, head, headname, field)		\
+	for((var) = TAILQ_LAST(head, headname);				\
+	    (var) != TAILQ_END(head);					\
+	    (var) = TAILQ_PREV(var, headname, field))
+
+/*
+ * Tail queue functions.
+ */
+#define	TAILQ_INIT(head) do {						\
+	(head)->tqh_first = NULL;					\
+	(head)->tqh_last = &(head)->tqh_first;				\
+} while (0)
+
+#define TAILQ_INSERT_HEAD(head, elm, field) do {			\
+	if (((elm)->field.tqe_next = (head)->tqh_first) != NULL)	\
+		(head)->tqh_first->field.tqe_prev =			\
+		    &(elm)->field.tqe_next;				\
+	else								\
+		(head)->tqh_last = &(elm)->field.tqe_next;		\
+	(head)->tqh_first = (elm);					\
+	(elm)->field.tqe_prev = &(head)->tqh_first;			\
+} while (0)
+
+#define TAILQ_INSERT_TAIL(head, elm, field) do {			\
+	(elm)->field.tqe_next = NULL;					\
+	(elm)->field.tqe_prev = (head)->tqh_last;			\
+	*(head)->tqh_last = (elm);					\
+	(head)->tqh_last = &(elm)->field.tqe_next;			\
+} while (0)
+
+#define TAILQ_INSERT_AFTER(head, listelm, elm, field) do {		\
+	if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\
+		(elm)->field.tqe_next->field.tqe_prev =			\
+		    &(elm)->field.tqe_next;				\
+	else								\
+		(head)->tqh_last = &(elm)->field.tqe_next;		\
+	(listelm)->field.tqe_next = (elm);				\
+	(elm)->field.tqe_prev = &(listelm)->field.tqe_next;		\
+} while (0)
+
+#define	TAILQ_INSERT_BEFORE(listelm, elm, field) do {			\
+	(elm)->field.tqe_prev = (listelm)->field.tqe_prev;		\
+	(elm)->field.tqe_next = (listelm);				\
+	*(listelm)->field.tqe_prev = (elm);				\
+	(listelm)->field.tqe_prev = &(elm)->field.tqe_next;		\
+} while (0)
+
+#define TAILQ_REMOVE(head, elm, field) do {				\
+	if (((elm)->field.tqe_next) != NULL)				\
+		(elm)->field.tqe_next->field.tqe_prev =			\
+		    (elm)->field.tqe_prev;				\
+	else								\
+		(head)->tqh_last = (elm)->field.tqe_prev;		\
+	*(elm)->field.tqe_prev = (elm)->field.tqe_next;			\
+	_Q_INVALIDATE((elm)->field.tqe_prev);				\
+	_Q_INVALIDATE((elm)->field.tqe_next);				\
+} while (0)
+
+#define TAILQ_REPLACE(head, elm, elm2, field) do {			\
+	if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL)	\
+		(elm2)->field.tqe_next->field.tqe_prev =		\
+		    &(elm2)->field.tqe_next;				\
+	else								\
+		(head)->tqh_last = &(elm2)->field.tqe_next;		\
+	(elm2)->field.tqe_prev = (elm)->field.tqe_prev;			\
+	*(elm2)->field.tqe_prev = (elm2);				\
+	_Q_INVALIDATE((elm)->field.tqe_prev);				\
+	_Q_INVALIDATE((elm)->field.tqe_next);				\
+} while (0)
+
+/*
+ * Circular queue definitions.
+ */
+#define CIRCLEQ_HEAD(name, type)					\
+struct name {								\
+	struct type *cqh_first;		/* first element */		\
+	struct type *cqh_last;		/* last element */		\
+}
+
+#define CIRCLEQ_HEAD_INITIALIZER(head)					\
+	{ CIRCLEQ_END(&head), CIRCLEQ_END(&head) }
+
+#define CIRCLEQ_ENTRY(type)						\
+struct {								\
+	struct type *cqe_next;		/* next element */		\
+	struct type *cqe_prev;		/* previous element */		\
+}
+
+/*
+ * Circular queue access methods
+ */
+#define	CIRCLEQ_FIRST(head)		((head)->cqh_first)
+#define	CIRCLEQ_LAST(head)		((head)->cqh_last)
+#define	CIRCLEQ_END(head)		((void *)(head))
+#define	CIRCLEQ_NEXT(elm, field)	((elm)->field.cqe_next)
+#define	CIRCLEQ_PREV(elm, field)	((elm)->field.cqe_prev)
+#define	CIRCLEQ_EMPTY(head)						\
+	(CIRCLEQ_FIRST(head) == CIRCLEQ_END(head))
+
+#define CIRCLEQ_FOREACH(var, head, field)				\
+	for((var) = CIRCLEQ_FIRST(head);				\
+	    (var) != CIRCLEQ_END(head);					\
+	    (var) = CIRCLEQ_NEXT(var, field))
+
+#define CIRCLEQ_FOREACH_REVERSE(var, head, field)			\
+	for((var) = CIRCLEQ_LAST(head);					\
+	    (var) != CIRCLEQ_END(head);					\
+	    (var) = CIRCLEQ_PREV(var, field))
+
+/*
+ * Circular queue functions.
+ */
+#define	CIRCLEQ_INIT(head) do {						\
+	(head)->cqh_first = CIRCLEQ_END(head);				\
+	(head)->cqh_last = CIRCLEQ_END(head);				\
+} while (0)
+
+#define CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do {		\
+	(elm)->field.cqe_next = (listelm)->field.cqe_next;		\
+	(elm)->field.cqe_prev = (listelm);				\
+	if ((listelm)->field.cqe_next == CIRCLEQ_END(head))		\
+		(head)->cqh_last = (elm);				\
+	else								\
+		(listelm)->field.cqe_next->field.cqe_prev = (elm);	\
+	(listelm)->field.cqe_next = (elm);				\
+} while (0)
+
+#define CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do {		\
+	(elm)->field.cqe_next = (listelm);				\
+	(elm)->field.cqe_prev = (listelm)->field.cqe_prev;		\
+	if ((listelm)->field.cqe_prev == CIRCLEQ_END(head))		\
+		(head)->cqh_first = (elm);				\
+	else								\
+		(listelm)->field.cqe_prev->field.cqe_next = (elm);	\
+	(listelm)->field.cqe_prev = (elm);				\
+} while (0)
+
+#define CIRCLEQ_INSERT_HEAD(head, elm, field) do {			\
+	(elm)->field.cqe_next = (head)->cqh_first;			\
+	(elm)->field.cqe_prev = CIRCLEQ_END(head);			\
+	if ((head)->cqh_last == CIRCLEQ_END(head))			\
+		(head)->cqh_last = (elm);				\
+	else								\
+		(head)->cqh_first->field.cqe_prev = (elm);		\
+	(head)->cqh_first = (elm);					\
+} while (0)
+
+#define CIRCLEQ_INSERT_TAIL(head, elm, field) do {			\
+	(elm)->field.cqe_next = CIRCLEQ_END(head);			\
+	(elm)->field.cqe_prev = (head)->cqh_last;			\
+	if ((head)->cqh_first == CIRCLEQ_END(head))			\
+		(head)->cqh_first = (elm);				\
+	else								\
+		(head)->cqh_last->field.cqe_next = (elm);		\
+	(head)->cqh_last = (elm);					\
+} while (0)
+
+#define	CIRCLEQ_REMOVE(head, elm, field) do {				\
+	if ((elm)->field.cqe_next == CIRCLEQ_END(head))			\
+		(head)->cqh_last = (elm)->field.cqe_prev;		\
+	else								\
+		(elm)->field.cqe_next->field.cqe_prev =			\
+		    (elm)->field.cqe_prev;				\
+	if ((elm)->field.cqe_prev == CIRCLEQ_END(head))			\
+		(head)->cqh_first = (elm)->field.cqe_next;		\
+	else								\
+		(elm)->field.cqe_prev->field.cqe_next =			\
+		    (elm)->field.cqe_next;				\
+	_Q_INVALIDATE((elm)->field.cqe_prev);				\
+	_Q_INVALIDATE((elm)->field.cqe_next);				\
+} while (0)
+
+#define CIRCLEQ_REPLACE(head, elm, elm2, field) do {			\
+	if (((elm2)->field.cqe_next = (elm)->field.cqe_next) ==		\
+	    CIRCLEQ_END(head))						\
+		(head).cqh_last = (elm2);				\
+	else								\
+		(elm2)->field.cqe_next->field.cqe_prev = (elm2);	\
+	if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) ==		\
+	    CIRCLEQ_END(head))						\
+		(head).cqh_first = (elm2);				\
+	else								\
+		(elm2)->field.cqe_prev->field.cqe_next = (elm2);	\
+	_Q_INVALIDATE((elm)->field.cqe_prev);				\
+	_Q_INVALIDATE((elm)->field.cqe_next);				\
+} while (0)
+
+#endif	/* !_SYS_QUEUE_H_ */
diff --git a/compat/strlcat.c b/compat/strlcat.c
new file mode 100644
index 00000000..fc7f3520
--- /dev/null
+++ b/compat/strlcat.c
@@ -0,0 +1,58 @@
+/* $Id: strlcat.c,v 1.1 2007-10-31 14:26:26 nicm Exp $ */
+/*	$OpenBSD: strlcat.c,v 1.13 2005/08/08 08:05:37 espie Exp $	*/
+
+/*
+ * Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <sys/types.h>
+#include <string.h>
+
+#include "tmux.h"
+
+/*
+ * Appends src to string dst of size siz (unlike strncat, siz is the
+ * full size of dst, not space left).  At most siz-1 characters
+ * will be copied.  Always NUL terminates (unless siz <= strlen(dst)).
+ * Returns strlen(src) + MIN(siz, strlen(initial dst)).
+ * If retval >= siz, truncation occurred.
+ */
+size_t
+strlcat(char *dst, const char *src, size_t siz)
+{
+	char *d = dst;
+	const char *s = src;
+	size_t n = siz;
+	size_t dlen;
+
+	/* Find the end of dst and adjust bytes left but don't go past end */
+	while (n-- != 0 && *d != '\0')
+		d++;
+	dlen = d - dst;
+	n = siz - dlen;
+
+	if (n == 0)
+		return(dlen + strlen(s));
+	while (*s != '\0') {
+		if (n != 1) {
+			*d++ = *s;
+			n--;
+		}
+		s++;
+	}
+	*d = '\0';
+
+	return(dlen + (s - src));	/* count does not include NUL */
+}
diff --git a/compat/strlcpy.c b/compat/strlcpy.c
new file mode 100644
index 00000000..fb974fb3
--- /dev/null
+++ b/compat/strlcpy.c
@@ -0,0 +1,54 @@
+/* $Id: strlcpy.c,v 1.1 2007-10-31 14:26:26 nicm Exp $ */
+/*	$OpenBSD: strlcpy.c,v 1.10 2005/08/08 08:05:37 espie Exp $	*/
+
+/*
+ * Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <sys/types.h>
+#include <string.h>
+
+#include "tmux.h"
+
+/*
+ * Copy src to string dst of size siz.  At most siz-1 characters
+ * will be copied.  Always NUL terminates (unless siz == 0).
+ * Returns strlen(src); if retval >= siz, truncation occurred.
+ */
+size_t
+strlcpy(char *dst, const char *src, size_t siz)
+{
+	char *d = dst;
+	const char *s = src;
+	size_t n = siz;
+
+	/* Copy as many bytes as will fit */
+	if (n != 0 && --n != 0) {
+		do {
+			if ((*d++ = *s++) == 0)
+				break;
+		} while (--n != 0);
+	}
+
+	/* Not enough room in dst, add NUL and traverse rest of src */
+	if (n == 0) {
+		if (siz != 0)
+			*d = '\0';		/* NUL-terminate dst */
+		while (*s++)
+			;
+	}
+
+	return(s - src - 1);	/* count does not include NUL */
+}
diff --git a/compat/strtonum.c b/compat/strtonum.c
new file mode 100644
index 00000000..cf1f9d38
--- /dev/null
+++ b/compat/strtonum.c
@@ -0,0 +1,68 @@
+/* $Id: strtonum.c,v 1.1 2007-10-31 14:26:26 nicm Exp $ */
+/*	$OpenBSD: strtonum.c,v 1.6 2004/08/03 19:38:01 millert Exp $	*/
+
+/*
+ * Copyright (c) 2004 Ted Unangst and Todd Miller
+ * All rights reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <errno.h>
+#include <limits.h>
+#include <stdlib.h>
+
+#include "tmux.h"
+
+#define INVALID 	1
+#define TOOSMALL 	2
+#define TOOLARGE 	3
+
+long long
+strtonum(const char *numstr, long long minval, long long maxval,
+    const char **errstrp)
+{
+	long long ll = 0;
+	char *ep;
+	int error = 0;
+	struct errval {
+		const char *errstr;
+		int err;
+	} ev[4] = {
+		{ NULL,		0 },
+		{ "invalid",	EINVAL },
+		{ "too small",	ERANGE },
+		{ "too large",	ERANGE },
+	};
+
+	ev[0].err = errno;
+	errno = 0;
+	if (minval > maxval)
+		error = INVALID;
+	else {
+		ll = strtoll(numstr, &ep, 10);
+		if (numstr == ep || *ep != '\0')
+			error = INVALID;
+		else if ((ll == LLONG_MIN && errno == ERANGE) || ll < minval)
+			error = TOOSMALL;
+		else if ((ll == LLONG_MAX && errno == ERANGE) || ll > maxval)
+			error = TOOLARGE;
+	}
+	if (errstrp != NULL)
+		*errstrp = ev[error].errstr;
+	errno = ev[error].err;
+	if (error)
+		ll = 0;
+
+	return (ll);
+}
diff --git a/compat/tree.h b/compat/tree.h
new file mode 100644
index 00000000..5085e3d6
--- /dev/null
+++ b/compat/tree.h
@@ -0,0 +1,678 @@
+/* $Id: tree.h,v 1.1 2007-10-31 14:26:26 nicm Exp $ */
+/*	$OpenBSD: tree.h,v 1.9 2004/11/24 18:10:42 tdeval Exp $	*/
+/*
+ * Copyright 2002 Niels Provos <provos@citi.umich.edu>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef	_SYS_TREE_H_
+#define	_SYS_TREE_H_
+
+/*
+ * This file defines data structures for different types of trees:
+ * splay trees and red-black trees.
+ *
+ * A splay tree is a self-organizing data structure.  Every operation
+ * on the tree causes a splay to happen.  The splay moves the requested
+ * node to the root of the tree and partly rebalances it.
+ *
+ * This has the benefit that request locality causes faster lookups as
+ * the requested nodes move to the top of the tree.  On the other hand,
+ * every lookup causes memory writes.
+ *
+ * The Balance Theorem bounds the total access time for m operations
+ * and n inserts on an initially empty tree as O((m + n)lg n).  The
+ * amortized cost for a sequence of m accesses to a splay tree is O(lg n);
+ *
+ * A red-black tree is a binary search tree with the node color as an
+ * extra attribute.  It fulfills a set of conditions:
+ *	- every search path from the root to a leaf consists of the
+ *	  same number of black nodes,
+ *	- each red node (except for the root) has a black parent,
+ *	- each leaf node is black.
+ *
+ * Every operation on a red-black tree is bounded as O(lg n).
+ * The maximum height of a red-black tree is 2lg (n+1).
+ */
+
+#define SPLAY_HEAD(name, type)						\
+struct name {								\
+	struct type *sph_root; /* root of the tree */			\
+}
+
+#define SPLAY_INITIALIZER(root)						\
+	{ NULL }
+
+#define SPLAY_INIT(root) do {						\
+	(root)->sph_root = NULL;					\
+} while (0)
+
+#define SPLAY_ENTRY(type)						\
+struct {								\
+	struct type *spe_left; /* left element */			\
+	struct type *spe_right; /* right element */			\
+}
+
+#define SPLAY_LEFT(elm, field)		(elm)->field.spe_left
+#define SPLAY_RIGHT(elm, field)		(elm)->field.spe_right
+#define SPLAY_ROOT(head)		(head)->sph_root
+#define SPLAY_EMPTY(head)		(SPLAY_ROOT(head) == NULL)
+
+/* SPLAY_ROTATE_{LEFT,RIGHT} expect that tmp hold SPLAY_{RIGHT,LEFT} */
+#define SPLAY_ROTATE_RIGHT(head, tmp, field) do {			\
+	SPLAY_LEFT((head)->sph_root, field) = SPLAY_RIGHT(tmp, field);	\
+	SPLAY_RIGHT(tmp, field) = (head)->sph_root;			\
+	(head)->sph_root = tmp;						\
+} while (0)
+
+#define SPLAY_ROTATE_LEFT(head, tmp, field) do {			\
+	SPLAY_RIGHT((head)->sph_root, field) = SPLAY_LEFT(tmp, field);	\
+	SPLAY_LEFT(tmp, field) = (head)->sph_root;			\
+	(head)->sph_root = tmp;						\
+} while (0)
+
+#define SPLAY_LINKLEFT(head, tmp, field) do {				\
+	SPLAY_LEFT(tmp, field) = (head)->sph_root;			\
+	tmp = (head)->sph_root;						\
+	(head)->sph_root = SPLAY_LEFT((head)->sph_root, field);		\
+} while (0)
+
+#define SPLAY_LINKRIGHT(head, tmp, field) do {				\
+	SPLAY_RIGHT(tmp, field) = (head)->sph_root;			\
+	tmp = (head)->sph_root;						\
+	(head)->sph_root = SPLAY_RIGHT((head)->sph_root, field);	\
+} while (0)
+
+#define SPLAY_ASSEMBLE(head, node, left, right, field) do {		\
+	SPLAY_RIGHT(left, field) = SPLAY_LEFT((head)->sph_root, field);	\
+	SPLAY_LEFT(right, field) = SPLAY_RIGHT((head)->sph_root, field);\
+	SPLAY_LEFT((head)->sph_root, field) = SPLAY_RIGHT(node, field);	\
+	SPLAY_RIGHT((head)->sph_root, field) = SPLAY_LEFT(node, field);	\
+} while (0)
+
+/* Generates prototypes and inline functions */
+
+#define SPLAY_PROTOTYPE(name, type, field, cmp)				\
+void name##_SPLAY(struct name *, struct type *);			\
+void name##_SPLAY_MINMAX(struct name *, int);				\
+struct type *name##_SPLAY_INSERT(struct name *, struct type *);		\
+struct type *name##_SPLAY_REMOVE(struct name *, struct type *);		\
+									\
+/* Finds the node with the same key as elm */				\
+static __inline struct type *						\
+name##_SPLAY_FIND(struct name *head, struct type *elm)			\
+{									\
+	if (SPLAY_EMPTY(head))						\
+		return(NULL);						\
+	name##_SPLAY(head, elm);					\
+	if ((cmp)(elm, (head)->sph_root) == 0)				\
+		return (head->sph_root);				\
+	return (NULL);							\
+}									\
+									\
+static __inline struct type *						\
+name##_SPLAY_NEXT(struct name *head, struct type *elm)			\
+{									\
+	name##_SPLAY(head, elm);					\
+	if (SPLAY_RIGHT(elm, field) != NULL) {				\
+		elm = SPLAY_RIGHT(elm, field);				\
+		while (SPLAY_LEFT(elm, field) != NULL) {		\
+			elm = SPLAY_LEFT(elm, field);			\
+		}							\
+	} else								\
+		elm = NULL;						\
+	return (elm);							\
+}									\
+									\
+static __inline struct type *						\
+name##_SPLAY_MIN_MAX(struct name *head, int val)			\
+{									\
+	name##_SPLAY_MINMAX(head, val);					\
+        return (SPLAY_ROOT(head));					\
+}
+
+/* Main splay operation.
+ * Moves node close to the key of elm to top
+ */
+#define SPLAY_GENERATE(name, type, field, cmp)				\
+struct type *								\
+name##_SPLAY_INSERT(struct name *head, struct type *elm)		\
+{									\
+    if (SPLAY_EMPTY(head)) {						\
+	    SPLAY_LEFT(elm, field) = SPLAY_RIGHT(elm, field) = NULL;	\
+    } else {								\
+	    int __comp;							\
+	    name##_SPLAY(head, elm);					\
+	    __comp = (cmp)(elm, (head)->sph_root);			\
+	    if(__comp < 0) {						\
+		    SPLAY_LEFT(elm, field) = SPLAY_LEFT((head)->sph_root, field);\
+		    SPLAY_RIGHT(elm, field) = (head)->sph_root;		\
+		    SPLAY_LEFT((head)->sph_root, field) = NULL;		\
+	    } else if (__comp > 0) {					\
+		    SPLAY_RIGHT(elm, field) = SPLAY_RIGHT((head)->sph_root, field);\
+		    SPLAY_LEFT(elm, field) = (head)->sph_root;		\
+		    SPLAY_RIGHT((head)->sph_root, field) = NULL;	\
+	    } else							\
+		    return ((head)->sph_root);				\
+    }									\
+    (head)->sph_root = (elm);						\
+    return (NULL);							\
+}									\
+									\
+struct type *								\
+name##_SPLAY_REMOVE(struct name *head, struct type *elm)		\
+{									\
+	struct type *__tmp;						\
+	if (SPLAY_EMPTY(head))						\
+		return (NULL);						\
+	name##_SPLAY(head, elm);					\
+	if ((cmp)(elm, (head)->sph_root) == 0) {			\
+		if (SPLAY_LEFT((head)->sph_root, field) == NULL) {	\
+			(head)->sph_root = SPLAY_RIGHT((head)->sph_root, field);\
+		} else {						\
+			__tmp = SPLAY_RIGHT((head)->sph_root, field);	\
+			(head)->sph_root = SPLAY_LEFT((head)->sph_root, field);\
+			name##_SPLAY(head, elm);			\
+			SPLAY_RIGHT((head)->sph_root, field) = __tmp;	\
+		}							\
+		return (elm);						\
+	}								\
+	return (NULL);							\
+}									\
+									\
+void									\
+name##_SPLAY(struct name *head, struct type *elm)			\
+{									\
+	struct type __node, *__left, *__right, *__tmp;			\
+	int __comp;							\
+\
+	SPLAY_LEFT(&__node, field) = SPLAY_RIGHT(&__node, field) = NULL;\
+	__left = __right = &__node;					\
+\
+	while ((__comp = (cmp)(elm, (head)->sph_root))) {		\
+		if (__comp < 0) {					\
+			__tmp = SPLAY_LEFT((head)->sph_root, field);	\
+			if (__tmp == NULL)				\
+				break;					\
+			if ((cmp)(elm, __tmp) < 0){			\
+				SPLAY_ROTATE_RIGHT(head, __tmp, field);	\
+				if (SPLAY_LEFT((head)->sph_root, field) == NULL)\
+					break;				\
+			}						\
+			SPLAY_LINKLEFT(head, __right, field);		\
+		} else if (__comp > 0) {				\
+			__tmp = SPLAY_RIGHT((head)->sph_root, field);	\
+			if (__tmp == NULL)				\
+				break;					\
+			if ((cmp)(elm, __tmp) > 0){			\
+				SPLAY_ROTATE_LEFT(head, __tmp, field);	\
+				if (SPLAY_RIGHT((head)->sph_root, field) == NULL)\
+					break;				\
+			}						\
+			SPLAY_LINKRIGHT(head, __left, field);		\
+		}							\
+	}								\
+	SPLAY_ASSEMBLE(head, &__node, __left, __right, field);		\
+}									\
+									\
+/* Splay with either the minimum or the maximum element			\
+ * Used to find minimum or maximum element in tree.			\
+ */									\
+void name##_SPLAY_MINMAX(struct name *head, int __comp) \
+{									\
+	struct type __node, *__left, *__right, *__tmp;			\
+\
+	SPLAY_LEFT(&__node, field) = SPLAY_RIGHT(&__node, field) = NULL;\
+	__left = __right = &__node;					\
+\
+	while (1) {							\
+		if (__comp < 0) {					\
+			__tmp = SPLAY_LEFT((head)->sph_root, field);	\
+			if (__tmp == NULL)				\
+				break;					\
+			if (__comp < 0){				\
+				SPLAY_ROTATE_RIGHT(head, __tmp, field);	\
+				if (SPLAY_LEFT((head)->sph_root, field) == NULL)\
+					break;				\
+			}						\
+			SPLAY_LINKLEFT(head, __right, field);		\
+		} else if (__comp > 0) {				\
+			__tmp = SPLAY_RIGHT((head)->sph_root, field);	\
+			if (__tmp == NULL)				\
+				break;					\
+			if (__comp > 0) {				\
+				SPLAY_ROTATE_LEFT(head, __tmp, field);	\
+				if (SPLAY_RIGHT((head)->sph_root, field) == NULL)\
+					break;				\
+			}						\
+