summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/sound/img,i2s-in.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/img,i2s-in.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/img,i2s-in.txt47
1 files changed, 47 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/img,i2s-in.txt b/Documentation/devicetree/bindings/sound/img,i2s-in.txt
new file mode 100644
index 000000000000..423265cfc3d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,i2s-in.txt
@@ -0,0 +1,47 @@
+Imagination Technologies I2S Input Controller
+
+Required Properties:
+
+ - compatible : Compatible list, must contain "img,i2s-in"
+
+ - #sound-dai-cells : Must be equal to 0
+
+ - reg : Offset and length of the register set for the device
+
+ - clocks : Contains an entry for each entry in clock-names
+
+ - clock-names : Must include the following entry:
+ "sys" The system clock
+
+ - dmas: Contains an entry for each entry in dma-names.
+
+ - dma-names: Must include the following entry:
+ "rx" Single DMA channel used by all active I2S channels
+
+ - img,i2s-channels : Number of I2S channels instantiated in the I2S in block
+
+Optional Properties:
+
+ - interrupts : Contains the I2S in interrupts. Depending on
+ the configuration, there may be no interrupts, one interrupt,
+ or an interrupt per I2S channel. For the case where there is
+ one interrupt per channel, the interrupts should be listed
+ in ascending channel order
+
+ - resets: Contains a phandle to the I2S in reset signal
+
+ - reset-names: Contains the reset signal name "rst"
+
+Example:
+
+i2s_in: i2s-in@18100800 {
+ compatible = "img,i2s-in";
+ reg = <0x18100800 0x200>;
+ interrupts = <GIC_SHARED 7 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 30 0xffffffff 0>;
+ dma-names = "rx";
+ clocks = <&cr_periph SYS_CLK_I2S_IN>;
+ clock-names = "sys";
+ img,i2s-channels = <6>;
+ #sound-dai-cells = <0>;
+};