diff options
29 files changed, 1225 insertions, 472 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 731146c3b138..c7353030670a 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -197,6 +197,18 @@ Description: Angle of rotation. Units after application of scale and offset are radians. +What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw +KernelVersion: 4.18 +Contact: linux-iio@vger.kernel.org +Description: + Relative position in direction x or y on a pad (may be + arbitrarily assigned but should match other such assignments on + device). + Units after application of scale and offset are milli percents + from the pad's size in both directions. Should be calibrated by + the consumer. + What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt index 6469a4cd2a6d..4a3c1d496e1a 100644 --- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt @@ -21,6 +21,14 @@ Optional properties: - dmas: Phandle to dma channel for the ADC. - dma-names: Must be "rx" when dmas property is being used. See ../../dma/dma.txt for details. + - #io-channel-cells: in case consumer drivers are attached, this must be 1. + See <Documentation/devicetree/bindings/iio/iio-bindings.txt> for details. + +Properties for consumer drivers: + - Consumer drivers can be connected to this producer device, as specified + in <Documentation/devicetree/bindings/iio/iio-bindings.txt> + - Channels exposed are specified in: + <dt-bindings/iio/adc/at91-sama5d2_adc.txt> Example: @@ -38,4 +46,5 @@ adc: adc@fc030000 { atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; dma-names = "rx"; + #io-channel-cells = <1>; } diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt new file mode 100644 index 000000000000..51456c0e9a27 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt @@ -0,0 +1,30 @@ +Generic resistive touchscreen ADC + +Required properties: + + - compatible: must be "resistive-adc-touch" +The device must be connected to an ADC device that provides channels for +position measurement and optional pressure. +Refer to ../iio/iio-bindings.txt for details + - iio-channels: must have at least two channels connected to an ADC device. +These should correspond to the channels exposed by the ADC device and should +have the right index as the ADC device registers them. These channels +represent the relative position on the "x" and "y" axes. + - iio-channel-names: must have all the channels' names. Mandatory channels +are "x" and "y". + +Optional properties: + - iio-channels: The third channel named "pressure" is optional and can be +used if the ADC device also measures pressure besides position. +If this channel is missing, pressure will be ignored and the touchscreen +will only report position. + - iio-channel-names: optional channel named "pressure". + +Example: + + resistive_touch: resistive_touch { + compatible = "resistive-adc-touch"; + touchscreen-min-pressure = <50000>; + io-channels = <&adc 24>, <&adc 25>, <&adc 26>; + io-channel-names = "x", "y", "pressure"; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt index 537643e86f61..d092d5d033a0 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt @@ -7,6 +7,9 @@ Optional properties for Touchscreens: (in pixels) - touchscreen-max-pressure : maximum reported pressure (arbitrary range dependent on the controller) + - touchscreen-min-pressure : minimum pressure on the touchscreen to be + achieved in order for the touchscreen + driver to report a touch event. - touchscreen-fuzz-x : horizontal noise value of the absolute input device (in pixels) - touchscreen-fuzz-y : vertical noise value of the absolute input diff --git a/MAINTAINERS b/MAINTAINERS index 9d5eeff51b5f..a21cadbf39e7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2547,6 +2547,13 @@ S: Maintained F: drivers/auxdisplay/ F: include/linux/cfag12864b.h +AVIA HX711 ANALOG DIGITAL CONVERTER IIO DRIVER +M: Andreas Klinger <ak@it-klinger.de> +L: linux-iio@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/iio/adc/avia-hx711.txt +F: drivers/iio/adc/hx711.c + AX.25 NETWORK LAYER M: Ralf Baechle <ralf@linux-mips.org> L: linux-hams@vger.kernel.org @@ -6006,6 +6013,12 @@ F: drivers/base/power/domain*.c F: include/linux/pm_domain.h F: Documentation/devicetree/bindings/power/power_domain.txt +GENERIC RESISTIVE TOUCHSCREEN ADC DRIVER +M: Eugen Hristev <eugen.hristev@microchip.com> +L: linux-input@vger.kernel.org +S: Maintained +F: drivers/input/touchscreen/resistive-adc-touch.c + GENERIC UIO DRIVER FOR PCI DEVICES M: "Michael S. Tsirkin" <mst@redhat.com> L: kvm@vger.kernel.org diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 9da79070357c..084638e4ddf2 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -157,7 +157,6 @@ config AT91_SAMA5D2_ADC tristate "Atmel AT91 SAMA5D2 ADC" depends on ARCH_AT91 || COMPILE_TEST depends on HAS_IOMEM - depends on HAS_DMA select IIO_BUFFER select IIO_TRIGGERED_BUFFER help @@ -647,7 +646,6 @@ config SD_ADC_MODULATOR config STM32_ADC_CORE tristate "STMicroelectronics STM32 adc core" depends on ARCH_STM32 || COMPILE_TEST - depends on HAS_DMA depends on OF depends on REGULATOR select IIO_BUFFER @@ -717,6 +715,7 @@ config SUN4I_GPADC depends on IIO depends on MFD_SUN4I_GPADC || MACH_SUN8I depends on THERMAL || !THERMAL_OF + select REGMAP_IRQ help Say yes here to build support for Allwinner (A10, A13 and A31) SoCs GPADC. This ADC provides 4 channels which can be used as an ADC or as diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index 8729d6524b4d..e02f7d1c86bc 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -102,14 +102,26 @@ #define AT91_SAMA5D2_LCDR 0x20 /* Interrupt Enable Register */ #define AT91_SAMA5D2_IER 0x24 +/* Interrupt Enable Register - TS X measurement ready */ +#define AT91_SAMA5D2_IER_XRDY BIT(20) +/* Interrupt Enable Register - TS Y measurement ready */ +#define AT91_SAMA5D2_IER_YRDY BIT(21) +/* Interrupt Enable Register - TS pressure measurement ready */ +#define AT91_SAMA5D2_IER_PRDY BIT(22) /* Interrupt Enable Register - general overrun error */ #define AT91_SAMA5D2_IER_GOVRE BIT(25) +/* Interrupt Enable Register - Pen detect */ +#define AT91_SAMA5D2_IER_PEN BIT(29) +/* Interrupt Enable Register - No pen detect */ +#define AT91_SAMA5D2_IER_NOPEN BIT(30) /* Interrupt Disable Register */ #define AT91_SAMA5D2_IDR 0x28 /* Interrupt Mask Register */ #define AT91_SAMA5D2_IMR 0x2c /* Interrupt Status Register */ #define AT91_SAMA5D2_ISR 0x30 +/* Interrupt Status Register - Pen touching sense status */ +#define AT91_SAMA5D2_ISR_PENS BIT(31) /* Last Channel Trigger Mode Register */ #define AT91_SAMA5D2_LCTMR 0x34 /* Last Channel Compare Window Register */ @@ -118,6 +130,15 @@ #define AT91_SAMA5D2_OVER 0x3c /* Extended Mode Register */ #define AT91_SAMA5D2_EMR 0x40 +/* Extended Mode Register - Oversampling rate */ +#define AT91_SAMA5D2_EMR_OSR(V) ((V) << 16) +#define AT91_SAMA5D2_EMR_OSR_MASK GENMASK(17, 16) +#define AT91_SAMA5D2_EMR_OSR_1SAMPLES 0 +#define AT91_SAMA5D2_EMR_OSR_4SAMPLES 1 +#define AT91_SAMA5D2_EMR_OSR_16SAMPLES 2 + +/* Extended Mode Register - Averaging on single trigger event */ +#define AT91_SAMA5D2_EMR_ASTE(V) ((V) << 20) /* Compare Window Register */ #define AT91_SAMA5D2_CWR 0x44 /* Channel Gain Register */ @@ -131,8 +152,38 @@ #define AT91_SAMA5D2_CDR0 0x50 /* Analog Control Register */ #define AT91_SAMA5D2_ACR 0x94 +/* Analog Control Register - Pen detect sensitivity mask */ +#define AT91_SAMA5D2_ACR_PENDETSENS_MASK GENMASK(1, 0) + /* Touchscreen Mode Register */ #define AT91_SAMA5D2_TSMR 0xb0 +/* Touchscreen Mode Register - No touch mode */ +#define AT91_SAMA5D2_TSMR_TSMODE_NONE 0 +/* Touchscreen Mode Register - 4 wire screen, no pressure measurement */ +#define AT91_SAMA5D2_TSMR_TSMODE_4WIRE_NO_PRESS 1 +/* Touchscreen Mode Register - 4 wire screen, pressure measurement */ +#define AT91_SAMA5D2_TSMR_TSMODE_4WIRE_PRESS 2 +/* Touchscreen Mode Register - 5 wire screen */ +#define AT91_SAMA5D2_TSMR_TSMODE_5WIRE 3 +/* Touchscreen Mode Register - Average samples mask */ +#define AT91_SAMA5D2_TSMR_TSAV_MASK GENMASK(5, 4) +/* Touchscreen Mode Register - Average samples */ +#define AT91_SAMA5D2_TSMR_TSAV(x) ((x) << 4) +/* Touchscreen Mode Register - Touch/trigger frequency ratio mask */ +#define AT91_SAMA5D2_TSMR_TSFREQ_MASK GENMASK(11, 8) +/* Touchscreen Mode Register - Touch/trigger frequency ratio */ +#define AT91_SAMA5D2_TSMR_TSFREQ(x) ((x) << 8) +/* Touchscreen Mode Register - Pen Debounce Time mask */ +#define AT91_SAMA5D2_TSMR_PENDBC_MASK GENMASK(31, 28) +/* Touchscreen Mode Register - Pen Debounce Time */ +#define AT91_SAMA5D2_TSMR_PENDBC(x) ((x) << 28) +/* Touchscreen Mode Register - No DMA for touch measurements */ +#define AT91_SAMA5D2_TSMR_NOTSDMA BIT(22) +/* Touchscreen Mode Register - Disable pen detection */ +#define AT91_SAMA5D2_TSMR_PENDET_DIS (0 << 24) +/* Touchscreen Mode Register - Enable pen detection */ +#define AT91_SAMA5D2_TSMR_PENDET_ENA BIT(24) + /* Touchscreen X Position Register */ #define AT91_SAMA5D2_XPOSR 0xb4 /* Touchscreen Y Position Register */ @@ -151,6 +202,12 @@ #define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL 2 /* Trigger Mode external trigger any edge */ #define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY 3 +/* Trigger Mode internal periodic */ +#define AT91_SAMA5D2_TRGR_TRGMOD_PERIODIC 5 +/* Trigger Mode - trigger period mask */ +#define AT91_SAMA5D2_TRGR_TRGPER_MASK GENMASK(31, 16) +/* Trigger Mode - trigger period */ +#define AT91_SAMA5D2_TRGR_TRGPER(x) ((x) << 16) /* Correction Select Register */ #define AT91_SAMA5D2_COSR 0xd0 @@ -169,6 +226,22 @@ #define AT91_SAMA5D2_SINGLE_CHAN_CNT 12 #define AT91_SAMA5D2_DIFF_CHAN_CNT 6 +#define AT91_SAMA5D2_TIMESTAMP_CHAN_IDX (AT91_SAMA5D2_SINGLE_CHAN_CNT + \ + AT91_SAMA5D2_DIFF_CHAN_CNT + 1) + +#define AT91_SAMA5D2_TOUCH_X_CHAN_IDX (AT91_SAMA5D2_SINGLE_CHAN_CNT + \ + AT91_SAMA5D2_DIFF_CHAN_CNT * 2) +#define AT91_SAMA5D2_TOUCH_Y_CHAN_IDX (AT91_SAMA5D2_TOUCH_X_CHAN_IDX + 1) +#define AT91_SAMA5D2_TOUCH_P_CHAN_IDX (AT91_SAMA5D2_TOUCH_Y_CHAN_IDX + 1) +#define AT91_SAMA5D2_MAX_CHAN_IDX AT91_SAMA5D2_TOUCH_P_CHAN_IDX + +#define AT91_SAMA5D2_TOUCH_SAMPLE_PERIOD_US 2000 /* 2ms */ +#define AT91_SAMA5D2_TOUCH_PEN_DETECT_DEBOUNCE_US 200 + +#define AT91_SAMA5D2_XYZ_MASK GENMASK(11, 0) + +#define AT91_SAMA5D2_MAX_POS_BITS 12 + /* * Maximum number of bytes to hold conversion from all channels * without the timestamp. @@ -184,6 +257,11 @@ #define AT91_HWFIFO_MAX_SIZE_STR "128" #define AT91_HWFIFO_MAX_SIZE 128 +/* Possible values for oversampling ratio */ +#define AT91_OSR_1SAMPLES 1 +#define AT91_OSR_4SAMPLES 4 +#define AT91_OSR_16SAMPLES 16 + #define AT91_SAMA5D2_CHAN_SINGLE(num, addr) \ { \ .type = IIO_VOLTAGE, \ @@ -192,12 +270,13 @@ .scan_index = num, \ .scan_type = { \ .sign = 'u', \ - .realbits = 12, \ + .realbits = 14, \ .storagebits = 16, \ }, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .datasheet_name = "CH"#num, \ .indexed = 1, \ } @@ -212,16 +291,50 @@ .scan_index = num + AT91_SAMA5D2_SINGLE_CHAN_CNT, \ .scan_type = { \ .sign = 's', \ - .realbits = 12, \ + .realbits = 14, \ .storagebits = 16, \ }, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .datasheet_name = "CH"#num"-CH"#num2, \ .indexed = 1, \ } +#define AT91_SAMA5D2_CHAN_TOUCH(num, name, mod) \ + { \ + .type = IIO_POSITIONRELATIVE, \ + .modified = 1, \ + .channel = num, \ + .channel2 = mod, \ + .scan_index = num, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 12, \ + .storagebits = 16, \ + }, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .datasheet_name = name, \ + } +#define AT91_SAMA5D2_CHAN_PRESSURE(num, name) \ + { \ + .type = IIO_PRESSURE, \ + .channel = num, \ + .scan_index = num, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 12, \ + .storagebits = 16, \ + }, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .datasheet_name = name, \ + } + #define at91_adc_readl(st, reg) readl_relaxed(st->base + reg) #define at91_adc_writel(st, reg, val) writel_relaxed(val, st->base + reg) @@ -260,6 +373,22 @@ struct at91_adc_dma { s64 dma_ts; }; +/** + * at91_adc_touch - at91-sama5d2 touchscreen information struct + * @sample_period_val: the value for periodic trigger interval + * @touching: is the pen touching the screen or not + * @x_pos: temporary placeholder for pressure computation + * @channels_bitmask: bitmask with the touchscreen channels enabled + * @workq: workqueue for buffer data pushing + */ +struct at91_adc_touch { + u16 sample_period_val; + bool touching; + u16 x_pos; + unsigned long channels_bitmask; + struct work_struct workq; +}; + struct at91_adc_state { void __iomem *base; int irq; @@ -267,14 +396,17 @@ struct at91_adc_state { struct regulator *reg; struct regulator *vref; int vref_uv; + unsigned int current_sample_rate; struct iio_trigger *trig; const struct at91_adc_trigger *selected_trig; const struct iio_chan_spec *chan; bool conversion_done; u32 conversion_value; + unsigned int oversampling_ratio; struct at91_adc_soc_info soc_info; wait_queue_head_t wq_data_available; struct at91_adc_dma dma_st; + struct at91_adc_touch touch_st; u16 buffer[AT91_BUFFER_MAX_HWORDS]; /* * lock to prevent concurrent 'single conversion' requests through @@ -329,8 +461,10 @@ static const struct iio_chan_spec at91_adc_channels[] = { AT91_SAMA5D2_CHAN_DIFF(6, 7, 0x68), AT91_SAMA5D2_CHAN_DIFF(8, 9, 0x70), AT91_SAMA5D2_CHAN_DIFF(10, 11, 0x78), - IIO_CHAN_SOFT_TIMESTAMP(AT91_SAMA5D2_SINGLE_CHAN_CNT - + AT91_SAMA5D2_DIFF_CHAN_CNT + 1), + IIO_CHAN_SOFT_TIMESTAMP(AT91_SAMA5D2_TIMESTAMP_CHAN_IDX), + AT91_SAMA5D2_CHAN_TOUCH(AT91_SAMA5D2_TOUCH_X_CHAN_IDX, "x", IIO_MOD_X), + AT91_SAMA5D2_CHAN_TOUCH(AT91_SAMA5D2_TOUCH_Y_CHAN_IDX, "y", IIO_MOD_Y), + AT91_SAMA5D2_CHAN_PRESSURE(AT91_SAMA5D2_TOUCH_P_CHAN_IDX, "pressure"), }; static int at91_adc_chan_xlate(struct iio_dev *indio_dev, int chan) @@ -354,6 +488,231 @@ at91_adc_chan_get(struct iio_dev *indio_dev, int chan) return indio_dev->channels + index; } +static inline int at91_adc_of_xlate(struct iio_dev *indio_dev, + const struct of_phandle_args *iiospec) +{ + return at91_adc_chan_xlate(indio_dev, iiospec->args[0]); +} + +static void at91_adc_config_emr(struct at91_adc_state *st) +{ + /* configure the extended mode register */ + unsigned int emr = at91_adc_readl(st, AT91_SAMA5D2_EMR); + + /* select oversampling per single trigger event */ + emr |= AT91_SAMA5D2_EMR_ASTE(1); + + /* delete leftover content if it's the case */ + emr &= ~AT91_SAMA5D2_EMR_OSR_MASK; + + /* select oversampling ratio from configuration */ + switch (st->oversampling_ratio) { + case AT91_OSR_1SAMPLES: + emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES) & + AT91_SAMA5D2_EMR_OSR_MASK; + break; + case AT91_OSR_4SAMPLES: + emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES) & + AT91_SAMA5D2_EMR_OSR_MASK; + break; + case AT91_OSR_16SAMPLES: + emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES) & + AT91_SAMA5D2_EMR_OSR_MASK; + break; + } + + at91_adc_writel(st, AT91_SAMA5D2_EMR, emr); +} + +static int at91_adc_adjust_val_osr(struct at91_adc_state *st, int *val) +{ + if (st->oversampling_ratio == AT91_OSR_1SAMPLES) { + /* + * in this case we only have 12 bits of real data, but channel + * is registered as 14 bits, so shift left two bits + */ + *val <<= 2; + } else if (st->oversampling_ratio == AT91_OSR_4SAMPLES) { + /* + * in this case we have 13 bits of real data, but channel + * is registered as 14 bits, so left shift one bit + */ + *val <<= 1; + } + + return IIO_VAL_INT; +} + +static void at91_adc_adjust_val_osr_array(struct at91_adc_state *st, void *buf, + int len) +{ + int i = 0, val; + u16 *buf_u16 = (u16 *) buf; + + /* + * We are converting each two bytes (each sample). + * First convert the byte based array to u16, and convert each sample + * separately. + * Each value is two bytes in an array of chars, so to not shift + * more than we need, save the value separately. + * len is in bytes, so divide by two to get number of samples. + */ + while (i < len / 2) { + val = buf_u16[i]; + at91_adc_adjust_val_osr(st, &val); + buf_u16[i] = val; + i++; + } +} + +static int at91_adc_configure_touch(struct at91_adc_state *st, bool state) +{ + u32 clk_khz = st->current_sample_rate / 1000; + int i = 0; + u16 pendbc; + u32 tsmr, acr; + + if (!state) { + /* disabling touch IRQs and setting mode to no touch enabled */ + at91_adc_writel(st, AT91_SAMA5D2_IDR, + AT91_SAMA5D2_IER_PEN | AT91_SAMA5D2_IER_NOPEN); + at91_adc_writel(st, AT91_SAMA5D2_TSMR, 0); + return 0; + } + /* + * debounce time is in microseconds, we need it in milliseconds to + * multiply with kilohertz, so, divide by 1000, but after the multiply. + * round up to make sure pendbc is at least 1 + */ + pendbc = round_up(AT91_SAMA5D2_TOUCH_PEN_DETECT_DEBOUNCE_US * + clk_khz / 1000, 1); + + /* get the required exponent */ + while (pendbc >> i++) + ; + + pendbc = i; + + tsmr = AT91_SAMA5D2_TSMR_TSMODE_4WIRE_PRESS; + + tsmr |= AT91_SAMA5D2_TSMR_TSAV(2) & AT91_SAMA5D2_TSMR_TSAV_MASK; + tsmr |= AT91_SAMA5D2_TSMR_PENDBC(pendbc) & + AT91_SAMA5D2_TSMR_PENDBC_MASK; + tsmr |= AT91_SAMA5D2_TSMR_NOTSDMA; + tsmr |= AT91_SAMA5D2_TSMR_PENDET_ENA; + tsmr |= AT91_SAMA5D2_TSMR_TSFREQ(2) & AT91_SAMA5D2_TSMR_TSFREQ_MASK; + + at91_adc_writel(st, AT91_SAMA5D2_TSMR, tsmr); + + acr = at91_adc_readl(st, AT91_SAMA5D2_ACR); + acr &= ~AT91_SAMA5D2_ACR_PENDETSENS_MASK; + acr |= 0x02 & AT91_SAMA5D2_ACR_PENDETSENS_MASK; + at91_adc_writel(st, AT91_SAMA5D2_ACR, acr); + + /* Sample Period Time = (TRGPER + 1) / ADCClock */ + st->touch_st.sample_period_val = + round_up((AT91_SAMA5D2_TOUCH_SAMPLE_PERIOD_US * + clk_khz / 1000) - 1, 1); + /* enable pen detect IRQ */ + at91_adc_writel(st, AT91_SAMA5D2_IER, AT91_SAMA5D2_IER_PEN); + + return 0; +} + +static u16 at91_adc_touch_pos(struct at91_adc_state *st, int reg) +{ + u32 val; + u32 scale, result, pos; + + /* + * to obtain the actual position we must divide by scale + * and multiply with max, where + * max = 2^AT91_SAMA5D2_MAX_POS_BITS - 1 + */ + /* first half of register is the x or y, second half is the scale */ + val = at91_adc_readl(st, reg); + if (!val) + dev_dbg(&iio_priv_to_dev(st)->dev, "pos is 0\n"); + + pos = val & AT91_SAMA5D2_XYZ_MASK; + result = (pos << AT91_SAMA5D2_MAX_POS_BITS) - pos; + scale = (val >> 16) & AT91_SAMA5D2_XYZ_MASK; + if (scale == 0) { + dev_err(&iio_priv_to_dev(st)->dev, "scale is 0\n"); + return 0; + } + result /= scale; + + return result; +} + +static u16 at91_adc_touch_x_pos(struct at91_adc_state *st) +{ + st->touch_st.x_pos = at91_adc_touch_pos(st, AT91_SAMA5D2_XPOSR); + return st->touch_st.x_pos; +} + +static u16 at91_adc_touch_y_pos(struct at91_adc_state *st) +{ + return at91_adc_touch_pos(st, AT91_SAMA5D2_YPOSR); +} + +static u16 at91_adc_touch_pressure(struct at91_adc_state *st) +{ + u32 val; + u32 z1, z2; + u32 pres; + u32 rxp = 1; + u32 factor = 1000; + + /* calculate the pressure */ + val = at91_adc_readl(st, AT91_SAMA5D2_PRESSR); + z1 = val & AT91_SAMA5D2_XYZ_MASK; + z2 = (val >> 16) & AT91_SAMA5D2_XYZ_MASK; + + if (z1 != 0) + pres = rxp * (st->touch_st.x_pos * factor / 1024) * + (z2 * factor / z1 - factor) / + factor; + else + pres = 0xFFFF; /* no pen contact */ + + /* + * The pressure from device grows down, minimum is 0xFFFF, maximum 0x0. + * We compute it this way, but let's return it in the expected way, + * growing from 0 to 0xFFFF. + */ + return 0xFFFF - pres; +} + +static int at91_adc_read_position(struct at91_adc_state *st, int chan, u16 *val) +{ + *val = 0; + if (!st->touch_st.touching) + return -ENODATA; + if (chan == AT91_SAMA5D2_TOUCH_X_CHAN_IDX) + *val = at91_adc_touch_x_pos(st); + else if (chan == AT91_SAMA5D2_TOUCH_Y_CHAN_IDX) + *val = at91_adc_touch_y_pos(st); + else + return -ENODATA; + + return IIO_VAL_INT; +} + +static int at91_adc_read_pressure(struct at91_adc_state *st, int chan, u16 *val) +{ + *val = 0; + if (!st->touch_st.touching) + return -ENODATA; + if (chan == AT91_SAMA5D2_TOUCH_P_CHAN_IDX) + *val = at91_adc_touch_pressure(st); + else + return -ENODATA; + + return IIO_VAL_INT; +} + static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) { struct iio_dev *indio = iio_trigger_get_drvdata(trig); @@ -375,6 +734,11 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) if (!chan) continue; + /* these channel types cannot be handled by this trigger */ + if (chan->type == IIO_POSITIONRELATIVE || + chan->type == IIO_PRESSURE) + continue; + if (state) { at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel)); @@ -520,7 +884,20 @@ static int at91_adc_dma_start(struct iio_dev *indio_dev) static int at91_adc_buffer_postenable(struct iio_dev *indio_dev) { int ret; + struct at91_adc_state *st = iio_priv(indio_dev); + /* check if we are enabling triggered buffer or the touchscreen */ + if (bitmap_subset(indio_dev->active_scan_mask, + &st->touch_st.channels_bitmask, + AT91_SAMA5D2_MAX_CHAN_IDX + 1)) { + /* touchscreen enabling */ + return at91_adc_configure_touch(st, true); + } + /* if we are not in triggered mode, we cannot enable the buffer. */ + if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES)) + return -EINVAL; + + /* we continue with the triggered buffer */ ret = at91_adc_dma_start(indio_dev); if (ret) { dev_err(&indio_dev->dev, "buffer postenable failed\n"); @@ -536,6 +913,18 @@ static int at91_adc_buffer_predisable(struct iio_dev *indio_dev) int ret; u8 bit; + /* check if we are disabling triggered buffer or the touchscreen */ + if (bitmap_subset(indio_dev->active_scan_mask, + &st->touch_st.channels_bitmask, + AT91_SAMA5D2_MAX_CHAN_IDX + 1)) { + /* touchscreen disable */ + return at91_adc_configure_touch(st, false); + } + /* if we are not in triggered mode, nothing to do here */ + if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES)) + return -EINVAL; + + /* continue with the triggered buffer */ ret = iio_triggered_buffer_predisable(indio_dev); if (ret < 0) dev_err(&indio_dev->dev, "buffer predisable failed\n"); @@ -558,6 +947,10 @@ static int at91_adc_buffer_predisable(struct iio_dev *indio_dev) if (!chan) continue; + /* these channel types are virtual, no need to do anything */ + if (chan->type == IIO_POSITIONRELATIVE || + chan->type == IIO_PRESSURE) + continue; if (st->dma_st.dma_chan) at91_adc_readl(st, chan->address); } @@ -613,6 +1006,7 @@ static void at91_adc_trigger_handler_nodma(struct iio_dev *indio_dev, { struct at91_adc_state *st = iio_priv(indio_dev); int i = 0; + int val; u8 bit; for_each_set_bit(bit, indio_dev->active_scan_mask, @@ -622,7 +1016,24 @@ static void at91_adc_trigger_handler_nodma(struct iio_dev *indio_dev, if (!chan) continue; - st->buffer[i] = at91_adc_readl(st, chan->address); + /* + * Our external trigger only supports the voltage channels. + * In case someone requested a different type of channel + * just put zeroes to buffer. + * This should not happen because we check the scan mode + * and scan mask when we enable the buffer, and we don't allow + * the buffer to start with a mixed mask (voltage and something + * else). + * Thus, emit a warning. + */ + if (chan->type == IIO_VOLTAGE) { + val = at91_adc_readl(st, chan->address); + at91_adc_adjust_val_osr(st, &val); + st->buffer[i] = val; + } else { + st->buffer[i] = 0; + WARN(true, "This trigger cannot handle this type of channel"); + } i++; } iio_push_to_buffers_with_timestamp(indio_dev, st->buffer, @@ -654,6 +1065,14 @@ static void at91_adc_trigger_handler_dma(struct iio_dev *indio_dev) interval = div_s64((ns - st->dma_st.dma_ts), sample_count); while (transferred_len >= sample_size) { + /* + * for all the values in the current sample, + * adjust the values inside the buffer for oversampling + */ + at91_adc_adjust_val_osr_array(st, + &st->dma_st.rx_buf[st->dma_st.buf_idx], + sample_size); + iio_push_to_buffers_with_timestamp(indio_dev, (st->dma_st.rx_buf + st->dma_st.buf_idx), (st->dma_st.dma_ts + interval * sample_index)); @@ -688,9 +1107,20 @@ static irqreturn_t at91_adc_trigger_handler(int irq, void *p) static int at91_adc_buffer_init(struct iio_dev *indio) { - return devm_iio_triggered_buffer_setup(&indio->dev, indio, + struct at91_adc_state *st = iio_priv(indio); + + if (st->selected_trig->hw_trig) { + return devm_iio_triggered_buffer_setup(&indio->dev, indio, &iio_pollfunc_store_time, &at91_adc_trigger_handler, &at91_buffer_setup_ops); + } + /* + * we need to prepare the buffer ops in case we will get + * another buffer attached (like a callback buffer for the touchscreen) + */ + indio->setup_ops = &at91_buffer_setup_ops; + + return 0; } static unsigned at91_adc_startup_time(unsigned startup_time_min, @@ -736,19 +1166,83 @@ static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq) dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n", freq, startup, prescal); + st->current_sample_rate = freq; } -static unsigned at91_adc_get_sample_freq(struct at91_adc_state *st) +static inline unsigned at91_adc_get_sample_freq(struct at91_adc_state *st) { - unsigned f_adc, f_per = clk_get_rate(st->per_clk); - unsigned mr, prescal; + return st->current_sample_rate; +} - mr = at91_adc_readl(st, AT91_SAMA5D2_MR); - prescal = (mr >> AT91_SAMA5D2_MR_PRESCAL_OFFSET) - & AT91_SAMA5D2_MR_PRESCAL_MAX; - f_adc = f_per / (2 * (prescal + 1)); +static void at91_adc_touch_data_handler(struct iio_dev *indio_dev) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + u8 bit; + u16 val; + int i = 0; + + for_each_set_bit(bit, indio_dev->active_scan_mask, + AT91_SAMA5D2_MAX_CHAN_IDX + 1) { + struct iio_chan_spec const *chan = + at91_adc_chan_get(indio_dev, bit); + + if (chan->type == IIO_POSITIONRELATIVE) + at91_adc_read_position(st, chan->channel, &val); + else if (chan->type == IIO_PRESSURE) + at91_adc_read_pressure(st, chan->channel, &val); + else + continue; + st->buffer[i] = val; + i++; + } + /* + * Schedule work to push to buffers. + * This is intended to push to the callback buffer that another driver + * registered. We are still in a handler from our IRQ. If we push + * directly, it means the other driver has it's callback called + * from our IRQ context. Which is something we better avoid. + * Let's schedule it after our IRQ is completed. + */ + schedule_work(&st->touch_st.workq); |