Merge tag 'iio-for-4.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of IIO new device support, features and cleanups in the 4.19 cycle

The usual mixed bunch.  Particular good to see is the generic
touch screen driver.  Will be interesting to see if this works
for other ADCs without major changes.

Core features
* Channel types
  - New position relative channel type primarily for touch screen
    sensors to feed the generic touchscreen driver.

New device support
* ad5586
  - Add support for the AD5311R DAC.

* Generic touch screen driver as an IIO consumer.
  - Note this is in input, but due to dependencies is coming through
    the IIO tree.
  - Specific support for this added to the at91-sama5d2 ADC.
  - Various necessary DT bindings added.

Staging Drops
* ADIS16060 gyro
  - A device with a very odd interface that was never cleanly supported.
    It's now very difficult to get, so unlikely it'll ever be fixed up.

Cleanups and minor features and fixes
* core
  - Fix y2038 timestamp issues now the core support is in place.
* 104-quad-8
  - Provide some defines for magic numbers to help readability.
  - Fix an off by one error in register selection
* ad7606
  - Put in a missing function parameter name in a prototype.
* adis16023
  - Use generic sign_extend function rather than local version.
* adis16240
  - Use generic sign_extend funciton rather than local version.
* at91-sama5d2
  - Drop dependency on HAS_DMA now this is handled elsewhere.  Will
    improve build test coverage.
  - Add oversampling ratio control.  Note there is a minor ABI change
    here to increase the apparent depth to 14 bits so as to allow
    for transparent provision of different oversampling ratios that
    drop the actual bit depth to 13 or 12 bits.
* hx711
  - Add a MAINTAINERS entry for this device.
* inv_mpu6050
  - Replace the timestamp fifo 'special' code with generic timestamp
    handling.
  - Switch to using local store of timestamp divider rather than rate
    as that is more helpful for accurate time measurement.
  - Fix an unaligned access that didn't seem to be causing any trouble.
  - Use the fifo overflow bit to track the overflow status rather than
    a software counter.
  - New timestamping mechanism to deal with missed sample interrupts.
* stm32-adc
  - Drop HAS_DMA build dependency.
* sun4i-gpadc
  - Select REGMAP_IRQ a very rarely hit build issue fix.

29 files changed, 1225 insertions, 472 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 731146c3b138..c7353030670a 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -197,6 +197,18 @@ Description:
 		Angle of rotation. Units after application of scale and offset
 		are radians.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw
+KernelVersion:	4.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Relative position in direction x or y on a pad (may be
+		arbitrarily assigned but should match other such assignments on
+		device).
+		Units after application of scale and offset are milli percents
+		from the pad's size in both directions. Should be calibrated by
+		the consumer.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
index 6469a4cd2a6d..4a3c1d496e1a 100644
--- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
@@ -21,6 +21,14 @@ Optional properties:
   - dmas: Phandle to dma channel for the ADC.
   - dma-names: Must be "rx" when dmas property is being used.
   See ../../dma/dma.txt for details.
+  - #io-channel-cells: in case consumer drivers are attached, this must be 1.
+  See <Documentation/devicetree/bindings/iio/iio-bindings.txt> for details.
+
+Properties for consumer drivers:
+  - Consumer drivers can be connected to this producer device, as specified
+  in <Documentation/devicetree/bindings/iio/iio-bindings.txt>
+  - Channels exposed are specified in:
+  <dt-bindings/iio/adc/at91-sama5d2_adc.txt>
 
 Example:
 
@@ -38,4 +46,5 @@ adc: adc@fc030000 {
 	atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
 	dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
 	dma-names = "rx";
+	#io-channel-cells = <1>;
 }
diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
new file mode 100644
index 000000000000..51456c0e9a27
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
@@ -0,0 +1,30 @@
+Generic resistive touchscreen ADC
+
+Required properties:
+
+ - compatible: must be "resistive-adc-touch"
+The device must be connected to an ADC device that provides channels for
+position measurement and optional pressure.
+Refer to ../iio/iio-bindings.txt for details
+ - iio-channels: must have at least two channels connected to an ADC device.
+These should correspond to the channels exposed by the ADC device and should
+have the right index as the ADC device registers them. These channels
+represent the relative position on the "x" and "y" axes.
+ - iio-channel-names: must have all the channels' names. Mandatory channels
+are "x" and "y".
+
+Optional properties:
+ - iio-channels: The third channel named "pressure" is optional and can be
+used if the ADC device also measures pressure besides position.
+If this channel is missing, pressure will be ignored and the touchscreen
+will only report position.
+ - iio-channel-names: optional channel named "pressure".
+
+Example:
+
+	resistive_touch: resistive_touch {
+		compatible = "resistive-adc-touch";
+		touchscreen-min-pressure = <50000>;
+		io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
+		io-channel-names = "x", "y", "pressure";
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
index 537643e86f61..d092d5d033a0 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
@@ -7,6 +7,9 @@ Optional properties for Touchscreens:
 				  (in pixels)
  - touchscreen-max-pressure	: maximum reported pressure (arbitrary range
 				  dependent on the controller)
+ - touchscreen-min-pressure	: minimum pressure on the touchscreen to be
+				  achieved in order for the touchscreen
+				  driver to report a touch event.
  - touchscreen-fuzz-x		: horizontal noise value of the absolute input
 				  device (in pixels)
  - touchscreen-fuzz-y		: vertical noise value of the absolute input
diff --git a/MAINTAINERS b/MAINTAINERS
index 9d5eeff51b5f..a21cadbf39e7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2547,6 +2547,13 @@ S:	Maintained
 F:	drivers/auxdisplay/
 F:	include/linux/cfag12864b.h
 
+AVIA HX711 ANALOG DIGITAL CONVERTER IIO DRIVER
+M:	Andreas Klinger <ak@it-klinger.de>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
+F:	drivers/iio/adc/hx711.c
+
 AX.25 NETWORK LAYER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
@@ -6006,6 +6013,12 @@ F:	drivers/base/power/domain*.c
 F:	include/linux/pm_domain.h
 F:	Documentation/devicetree/bindings/power/power_domain.txt
 
+GENERIC RESISTIVE TOUCHSCREEN ADC DRIVER
+M:	Eugen Hristev <eugen.hristev@microchip.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/input/touchscreen/resistive-adc-touch.c
+
 GENERIC UIO DRIVER FOR PCI DEVICES
 M:	"Michael S. Tsirkin" <mst@redhat.com>
 L:	kvm@vger.kernel.org
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 9da79070357c..084638e4ddf2 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -157,7 +157,6 @@ config AT91_SAMA5D2_ADC
 	tristate "Atmel AT91 SAMA5D2 ADC"
 	depends on ARCH_AT91 || COMPILE_TEST
 	depends on HAS_IOMEM
-	depends on HAS_DMA
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
@@ -647,7 +646,6 @@ config SD_ADC_MODULATOR
 config STM32_ADC_CORE
 	tristate "STMicroelectronics STM32 adc core"
 	depends on ARCH_STM32 || COMPILE_TEST
-	depends on HAS_DMA
 	depends on OF
 	depends on REGULATOR
 	select IIO_BUFFER
@@ -717,6 +715,7 @@ config SUN4I_GPADC
 	depends on IIO
 	depends on MFD_SUN4I_GPADC || MACH_SUN8I
 	depends on THERMAL || !THERMAL_OF
+	select REGMAP_IRQ
 	help
 	  Say yes here to build support for Allwinner (A10, A13 and A31) SoCs
 	  GPADC. This ADC provides 4 channels which can be used as an ADC or as
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index 8729d6524b4d..e02f7d1c86bc 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -102,14 +102,26 @@
 #define AT91_SAMA5D2_LCDR	0x20
 /* Interrupt Enable Register */
 #define AT91_SAMA5D2_IER	0x24
+/* Interrupt Enable Register - TS X measurement ready */
+#define AT91_SAMA5D2_IER_XRDY   BIT(20)
+/* Interrupt Enable Register - TS Y measurement ready */
+#define AT91_SAMA5D2_IER_YRDY   BIT(21)
+/* Interrupt Enable Register - TS pressure measurement ready */
+#define AT91_SAMA5D2_IER_PRDY   BIT(22)
 /* Interrupt Enable Register - general overrun error */
 #define AT91_SAMA5D2_IER_GOVRE BIT(25)
+/* Interrupt Enable Register - Pen detect */
+#define AT91_SAMA5D2_IER_PEN    BIT(29)
+/* Interrupt Enable Register - No pen detect */
+#define AT91_SAMA5D2_IER_NOPEN  BIT(30)
 /* Interrupt Disable Register */
 #define AT91_SAMA5D2_IDR	0x28
 /* Interrupt Mask Register */
 #define AT91_SAMA5D2_IMR	0x2c
 /* Interrupt Status Register */
 #define AT91_SAMA5D2_ISR	0x30
+/* Interrupt Status Register - Pen touching sense status */
+#define AT91_SAMA5D2_ISR_PENS   BIT(31)
 /* Last Channel Trigger Mode Register */
 #define AT91_SAMA5D2_LCTMR	0x34
 /* Last Channel Compare Window Register */
@@ -118,6 +130,15 @@
 #define AT91_SAMA5D2_OVER	0x3c
 /* Extended Mode Register */
 #define AT91_SAMA5D2_EMR	0x40
+/* Extended Mode Register - Oversampling rate */
+#define AT91_SAMA5D2_EMR_OSR(V)			((V) << 16)
+#define AT91_SAMA5D2_EMR_OSR_MASK		GENMASK(17, 16)
+#define AT91_SAMA5D2_EMR_OSR_1SAMPLES		0
+#define AT91_SAMA5D2_EMR_OSR_4SAMPLES		1
+#define AT91_SAMA5D2_EMR_OSR_16SAMPLES		2
+
+/* Extended Mode Register - Averaging on single trigger event */
+#define AT91_SAMA5D2_EMR_ASTE(V)		((V) << 20)
 /* Compare Window Register */
 #define AT91_SAMA5D2_CWR	0x44
 /* Channel Gain Register */
@@ -131,8 +152,38 @@
 #define AT91_SAMA5D2_CDR0	0x50
 /* Analog Control Register */
 #define AT91_SAMA5D2_ACR	0x94
+/* Analog Control Register - Pen detect sensitivity mask */
+#define AT91_SAMA5D2_ACR_PENDETSENS_MASK        GENMASK(1, 0)
+
 /* Touchscreen Mode Register */
 #define AT91_SAMA5D2_TSMR	0xb0
+/* Touchscreen Mode Register - No touch mode */
+#define AT91_SAMA5D2_TSMR_TSMODE_NONE           0
+/* Touchscreen Mode Register - 4 wire screen, no pressure measurement */
+#define AT91_SAMA5D2_TSMR_TSMODE_4WIRE_NO_PRESS 1
+/* Touchscreen Mode Register - 4 wire screen, pressure measurement */
+#define AT91_SAMA5D2_TSMR_TSMODE_4WIRE_PRESS    2
+/* Touchscreen Mode Register - 5 wire screen */
+#define AT91_SAMA5D2_TSMR_TSMODE_5WIRE          3
+/* Touchscreen Mode Register - Average samples mask */
+#define AT91_SAMA5D2_TSMR_TSAV_MASK             GENMASK(5, 4)
+/* Touchscreen Mode Register - Average samples */
+#define AT91_SAMA5D2_TSMR_TSAV(x)               ((x) << 4)
+/* Touchscreen Mode Register - Touch/trigger frequency ratio mask */
+#define AT91_SAMA5D2_TSMR_TSFREQ_MASK           GENMASK(11, 8)
+/* Touchscreen Mode Register - Touch/trigger frequency ratio */
+#define AT91_SAMA5D2_TSMR_TSFREQ(x)             ((x) << 8)
+/* Touchscreen Mode Register - Pen Debounce Time mask */
+#define AT91_SAMA5D2_TSMR_PENDBC_MASK           GENMASK(31, 28)
+/* Touchscreen Mode Register - Pen Debounce Time */
+#define AT91_SAMA5D2_TSMR_PENDBC(x)            ((x) << 28)
+/* Touchscreen Mode Register - No DMA for touch measurements */
+#define AT91_SAMA5D2_TSMR_NOTSDMA               BIT(22)
+/* Touchscreen Mode Register - Disable pen detection */
+#define AT91_SAMA5D2_TSMR_PENDET_DIS            (0 << 24)
+/* Touchscreen Mode Register - Enable pen detection */
+#define AT91_SAMA5D2_TSMR_PENDET_ENA            BIT(24)
+
 /* Touchscreen X Position Register */
 #define AT91_SAMA5D2_XPOSR	0xb4
 /* Touchscreen Y Position Register */
@@ -151,6 +202,12 @@
 #define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL 2
 /* Trigger Mode external trigger any edge */
 #define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY 3
+/* Trigger Mode internal periodic */
+#define AT91_SAMA5D2_TRGR_TRGMOD_PERIODIC 5
+/* Trigger Mode - trigger period mask */
+#define AT91_SAMA5D2_TRGR_TRGPER_MASK           GENMASK(31, 16)
+/* Trigger Mode - trigger period */
+#define AT91_SAMA5D2_TRGR_TRGPER(x)             ((x) << 16)
 
 /* Correction Select Register */
 #define AT91_SAMA5D2_COSR	0xd0
@@ -169,6 +226,22 @@
 #define AT91_SAMA5D2_SINGLE_CHAN_CNT 12
 #define AT91_SAMA5D2_DIFF_CHAN_CNT 6
 
+#define AT91_SAMA5D2_TIMESTAMP_CHAN_IDX (AT91_SAMA5D2_SINGLE_CHAN_CNT + \
+					 AT91_SAMA5D2_DIFF_CHAN_CNT + 1)
+
+#define AT91_SAMA5D2_TOUCH_X_CHAN_IDX (AT91_SAMA5D2_SINGLE_CHAN_CNT + \
+					 AT91_SAMA5D2_DIFF_CHAN_CNT * 2)
+#define AT91_SAMA5D2_TOUCH_Y_CHAN_IDX   (AT91_SAMA5D2_TOUCH_X_CHAN_IDX + 1)
+#define AT91_SAMA5D2_TOUCH_P_CHAN_IDX   (AT91_SAMA5D2_TOUCH_Y_CHAN_IDX + 1)
+#define AT91_SAMA5D2_MAX_CHAN_IDX	AT91_SAMA5D2_TOUCH_P_CHAN_IDX
+
+#define AT91_SAMA5D2_TOUCH_SAMPLE_PERIOD_US          2000    /* 2ms */
+#define AT91_SAMA5D2_TOUCH_PEN_DETECT_DEBOUNCE_US    200
+
+#define AT91_SAMA5D2_XYZ_MASK		GENMASK(11, 0)
+
+#define AT91_SAMA5D2_MAX_POS_BITS			12
+
 /*
  * Maximum number of bytes to hold conversion from all channels
  * without the timestamp.
@@ -184,6 +257,11 @@
 #define AT91_HWFIFO_MAX_SIZE_STR	"128"
 #define AT91_HWFIFO_MAX_SIZE		128
 
+/* Possible values for oversampling ratio */
+#define AT91_OSR_1SAMPLES		1
+#define AT91_OSR_4SAMPLES		4
+#define AT91_OSR_16SAMPLES		16
+
 #define AT91_SAMA5D2_CHAN_SINGLE(num, addr)				\
 	{								\
 		.type = IIO_VOLTAGE,					\
@@ -192,12 +270,13 @@
 		.scan_index = num,					\
 		.scan_type = {						\
 			.sign = 'u',					\
-			.realbits = 12,					\
+			.realbits = 14,					\
 			.storagebits = 16,				\
 		},							\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
-		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
 		.datasheet_name = "CH"#num,				\
 		.indexed = 1,						\
 	}
@@ -212,16 +291,50 @@
 		.scan_index = num + AT91_SAMA5D2_SINGLE_CHAN_CNT,	\
 		.scan_type = {						\
 			.sign = 's',					\
-			.realbits = 12,					\
+			.realbits = 14,					\
 			.storagebits = 16,				\
 		},							\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
-		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
 		.datasheet_name = "CH"#num"-CH"#num2,			\
 		.indexed = 1,						\
 	}
 
+#define AT91_SAMA5D2_CHAN_TOUCH(num, name, mod)				\
+	{								\
+		.type = IIO_POSITIONRELATIVE,				\
+		.modified = 1,						\
+		.channel = num,						\
+		.channel2 = mod,					\
+		.scan_index = num,					\
+		.scan_type = {						\
+			.sign = 'u',					\
+			.realbits = 12,					\
+			.storagebits = 16,				\
+		},							\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
+		.datasheet_name = name,					\
+	}
+#define AT91_SAMA5D2_CHAN_PRESSURE(num, name)				\
+	{								\
+		.type = IIO_PRESSURE,					\
+		.channel = num,						\
+		.scan_index = num,					\
+		.scan_type = {						\
+			.sign = 'u',					\
+			.realbits = 12,					\
+			.storagebits = 16,				\
+		},							\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
+		.datasheet_name = name,					\
+	}
+
 #define at91_adc_readl(st, reg)		readl_relaxed(st->base + reg)
 #define at91_adc_writel(st, reg, val)	writel_relaxed(val, st->base + reg)
 
@@ -260,6 +373,22 @@ struct at91_adc_dma {
 	s64				dma_ts;
 };
 
+/**
+ * at91_adc_touch - at91-sama5d2 touchscreen information struct
+ * @sample_period_val:		the value for periodic trigger interval
+ * @touching:			is the pen touching the screen or not
+ * @x_pos:			temporary placeholder for pressure computation
+ * @channels_bitmask:		bitmask with the touchscreen channels enabled
+ * @workq:			workqueue for buffer data pushing
+ */
+struct at91_adc_touch {
+	u16				sample_period_val;
+	bool				touching;
+	u16				x_pos;
+	unsigned long			channels_bitmask;
+	struct work_struct		workq;
+};
+
 struct at91_adc_state {
 	void __iomem			*base;
 	int				irq;
@@ -267,14 +396,17 @@ struct at91_adc_state {
 	struct regulator		*reg;
 	struct regulator		*vref;
 	int				vref_uv;
+	unsigned int			current_sample_rate;
 	struct iio_trigger		*trig;
 	const struct at91_adc_trigger	*selected_trig;
 	const struct iio_chan_spec	*chan;
 	bool				conversion_done;
 	u32				conversion_value;
+	unsigned int			oversampling_ratio;
 	struct at91_adc_soc_info	soc_info;
 	wait_queue_head_t		wq_data_available;
 	struct at91_adc_dma		dma_st;
+	struct at91_adc_touch		touch_st;
 	u16				buffer[AT91_BUFFER_MAX_HWORDS];
 	/*
 	 * lock to prevent concurrent 'single conversion' requests through
@@ -329,8 +461,10 @@ static const struct iio_chan_spec at91_adc_channels[] = {
 	AT91_SAMA5D2_CHAN_DIFF(6, 7, 0x68),
 	AT91_SAMA5D2_CHAN_DIFF(8, 9, 0x70),
 	AT91_SAMA5D2_CHAN_DIFF(10, 11, 0x78),
-	IIO_CHAN_SOFT_TIMESTAMP(AT91_SAMA5D2_SINGLE_CHAN_CNT
-				+ AT91_SAMA5D2_DIFF_CHAN_CNT + 1),
+	IIO_CHAN_SOFT_TIMESTAMP(AT91_SAMA5D2_TIMESTAMP_CHAN_IDX),
+	AT91_SAMA5D2_CHAN_TOUCH(AT91_SAMA5D2_TOUCH_X_CHAN_IDX, "x", IIO_MOD_X),
+	AT91_SAMA5D2_CHAN_TOUCH(AT91_SAMA5D2_TOUCH_Y_CHAN_IDX, "y", IIO_MOD_Y),
+	AT91_SAMA5D2_CHAN_PRESSURE(AT91_SAMA5D2_TOUCH_P_CHAN_IDX, "pressure"),
 };
 
 static int at91_adc_chan_xlate(struct iio_dev *indio_dev, int chan)
@@ -354,6 +488,231 @@ at91_adc_chan_get(struct iio_dev *indio_dev, int chan)
 	return indio_dev->channels + index;
 }
 
+static inline int at91_adc_of_xlate(struct iio_dev *indio_dev,
+				    const struct of_phandle_args *iiospec)
+{
+	return at91_adc_chan_xlate(indio_dev, iiospec->args[0]);
+}
+
+static void at91_adc_config_emr(struct at91_adc_state *st)
+{
+	/* configure the extended mode register */
+	unsigned int emr = at91_adc_readl(st, AT91_SAMA5D2_EMR);
+
+	/* select oversampling per single trigger event */
+	emr |= AT91_SAMA5D2_EMR_ASTE(1);
+
+	/* delete leftover content if it's the case */
+	emr &= ~AT91_SAMA5D2_EMR_OSR_MASK;
+
+	/* select oversampling ratio from configuration */
+	switch (st->oversampling_ratio) {
+	case AT91_OSR_1SAMPLES:
+		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES) &
+		       AT91_SAMA5D2_EMR_OSR_MASK;
+		break;
+	case AT91_OSR_4SAMPLES:
+		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES) &
+		       AT91_SAMA5D2_EMR_OSR_MASK;
+		break;
+	case AT91_OSR_16SAMPLES:
+		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES) &
+		       AT91_SAMA5D2_EMR_OSR_MASK;
+		break;
+	}
+
+	at91_adc_writel(st, AT91_SAMA5D2_EMR, emr);
+}
+
+static int at91_adc_adjust_val_osr(struct at91_adc_state *st, int *val)
+{
+	if (st->oversampling_ratio == AT91_OSR_1SAMPLES) {
+		/*
+		 * in this case we only have 12 bits of real data, but channel
+		 * is registered as 14 bits, so shift left two bits
+		 */
+		*val <<= 2;
+	} else if (st->oversampling_ratio == AT91_OSR_4SAMPLES) {
+		/*
+		 * in this case we have 13 bits of real data, but channel
+		 * is registered as 14 bits, so left shift one bit
+		 */
+		*val <<= 1;
+	}
+
+	return IIO_VAL_INT;
+}
+
+static void at91_adc_adjust_val_osr_array(struct at91_adc_state *st, void *buf,
+					  int len)
+{
+	int i = 0, val;
+	u16 *buf_u16 = (u16 *) buf;
+
+	/*
+	 * We are converting each two bytes (each sample).
+	 * First convert the byte based array to u16, and convert each sample
+	 * separately.
+	 * Each value is two bytes in an array of chars, so to not shift
+	 * more than we need, save the value separately.
+	 * len is in bytes, so divide by two to get number of samples.
+	 */
+	while (i < len / 2) {
+		val = buf_u16[i];
+		at91_adc_adjust_val_osr(st, &val);
+		buf_u16[i] = val;
+		i++;
+	}
+}
+
+static int at91_adc_configure_touch(struct at91_adc_state *st, bool state)
+{
+	u32 clk_khz = st->current_sample_rate / 1000;
+	int i = 0;
+	u16 pendbc;
+	u32 tsmr, acr;
+
+	if (!state) {
+		/* disabling touch IRQs and setting mode to no touch enabled */
+		at91_adc_writel(st, AT91_SAMA5D2_IDR,
+				AT91_SAMA5D2_IER_PEN | AT91_SAMA5D2_IER_NOPEN);
+		at91_adc_writel(st, AT91_SAMA5D2_TSMR, 0);
+		return 0;
+	}
+	/*
+	 * debounce time is in microseconds, we need it in milliseconds to
+	 * multiply with kilohertz, so, divide by 1000, but after the multiply.
+	 * round up to make sure pendbc is at least 1
+	 */
+	pendbc = round_up(AT91_SAMA5D2_TOUCH_PEN_DETECT_DEBOUNCE_US *
+			  clk_khz / 1000, 1);
+
+	/* get the required exponent */
+	while (pendbc >> i++)
+		;
+
+	pendbc = i;
+
+	tsmr = AT91_SAMA5D2_TSMR_TSMODE_4WIRE_PRESS;
+
+	tsmr |= AT91_SAMA5D2_TSMR_TSAV(2) & AT91_SAMA5D2_TSMR_TSAV_MASK;
+	tsmr |= AT91_SAMA5D2_TSMR_PENDBC(pendbc) &
+		AT91_SAMA5D2_TSMR_PENDBC_MASK;
+	tsmr |= AT91_SAMA5D2_TSMR_NOTSDMA;
+	tsmr |= AT91_SAMA5D2_TSMR_PENDET_ENA;
+	tsmr |= AT91_SAMA5D2_TSMR_TSFREQ(2) & AT91_SAMA5D2_TSMR_TSFREQ_MASK;
+
+	at91_adc_writel(st, AT91_SAMA5D2_TSMR, tsmr);
+
+	acr =  at91_adc_readl(st, AT91_SAMA5D2_ACR);
+	acr &= ~AT91_SAMA5D2_ACR_PENDETSENS_MASK;
+	acr |= 0x02 & AT91_SAMA5D2_ACR_PENDETSENS_MASK;
+	at91_adc_writel(st, AT91_SAMA5D2_ACR, acr);
+
+	/* Sample Period Time = (TRGPER + 1) / ADCClock */
+	st->touch_st.sample_period_val =
+				 round_up((AT91_SAMA5D2_TOUCH_SAMPLE_PERIOD_US *
+				 clk_khz / 1000) - 1, 1);
+	/* enable pen detect IRQ */
+	at91_adc_writel(st, AT91_SAMA5D2_IER, AT91_SAMA5D2_IER_PEN);
+
+	return 0;
+}
+
+static u16 at91_adc_touch_pos(struct at91_adc_state *st, int reg)
+{
+	u32 val;
+	u32 scale, result, pos;
+
+	/*
+	 * to obtain the actual position we must divide by scale
+	 * and multiply with max, where
+	 * max = 2^AT91_SAMA5D2_MAX_POS_BITS - 1
+	 */
+	/* first half of register is the x or y, second half is the scale */
+	val = at91_adc_readl(st, reg);
+	if (!val)
+		dev_dbg(&iio_priv_to_dev(st)->dev, "pos is 0\n");
+
+	pos = val & AT91_SAMA5D2_XYZ_MASK;
+	result = (pos << AT91_SAMA5D2_MAX_POS_BITS) - pos;
+	scale = (val >> 16) & AT91_SAMA5D2_XYZ_MASK;
+	if (scale == 0) {
+		dev_err(&iio_priv_to_dev(st)->dev, "scale is 0\n");
+		return 0;
+	}
+	result /= scale;
+
+	return result;
+}
+
+static u16 at91_adc_touch_x_pos(struct at91_adc_state *st)
+{
+	st->touch_st.x_pos = at91_adc_touch_pos(st, AT91_SAMA5D2_XPOSR);
+	return st->touch_st.x_pos;
+}
+
+static u16 at91_adc_touch_y_pos(struct at91_adc_state *st)
+{
+	return at91_adc_touch_pos(st, AT91_SAMA5D2_YPOSR);
+}
+
+static u16 at91_adc_touch_pressure(struct at91_adc_state *st)
+{
+	u32 val;
+	u32 z1, z2;
+	u32 pres;
+	u32 rxp = 1;
+	u32 factor = 1000;
+
+	/* calculate the pressure */
+	val = at91_adc_readl(st, AT91_SAMA5D2_PRESSR);
+	z1 = val & AT91_SAMA5D2_XYZ_MASK;
+	z2 = (val >> 16) & AT91_SAMA5D2_XYZ_MASK;
+
+	if (z1 != 0)
+		pres = rxp * (st->touch_st.x_pos * factor / 1024) *
+			(z2 * factor / z1 - factor) /
+			factor;
+	else
+		pres = 0xFFFF;       /* no pen contact */
+
+	/*
+	 * The pressure from device grows down, minimum is 0xFFFF, maximum 0x0.
+	 * We compute it this way, but let's return it in the expected way,
+	 * growing from 0 to 0xFFFF.
+	 */
+	return 0xFFFF - pres;
+}
+
+static int at91_adc_read_position(struct at91_adc_state *st, int chan, u16 *val)
+{
+	*val = 0;
+	if (!st->touch_st.touching)
+		return -ENODATA;
+	if (chan == AT91_SAMA5D2_TOUCH_X_CHAN_IDX)
+		*val = at91_adc_touch_x_pos(st);
+	else if (chan == AT91_SAMA5D2_TOUCH_Y_CHAN_IDX)
+		*val = at91_adc_touch_y_pos(st);
+	else
+		return -ENODATA;
+
+	return IIO_VAL_INT;
+}
+
+static int at91_adc_read_pressure(struct at91_adc_state *st, int chan, u16 *val)
+{
+	*val = 0;
+	if (!st->touch_st.touching)
+		return -ENODATA;
+	if (chan == AT91_SAMA5D2_TOUCH_P_CHAN_IDX)
+		*val = at91_adc_touch_pressure(st);
+	else
+		return -ENODATA;
+
+	return IIO_VAL_INT;
+}
+
 static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
 {
 	struct iio_dev *indio = iio_trigger_get_drvdata(trig);
@@ -375,6 +734,11 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
 
 		if (!chan)
 			continue;
+		/* these channel types cannot be handled by this trigger */
+		if (chan->type == IIO_POSITIONRELATIVE ||
+		    chan->type == IIO_PRESSURE)
+			continue;
+
 		if (state) {
 			at91_adc_writel(st, AT91_SAMA5D2_CHER,
 					BIT(chan->channel));
@@ -520,7 +884,20 @@ static int at91_adc_dma_start(struct iio_dev *indio_dev)
 static int at91_adc_buffer_postenable(struct iio_dev *indio_dev)
 {
 	int ret;
+	struct at91_adc_state *st = iio_priv(indio_dev);
 
+	/* check if we are enabling triggered buffer or the touchscreen */
+	if (bitmap_subset(indio_dev->active_scan_mask,
+			  &st->touch_st.channels_bitmask,
+			  AT91_SAMA5D2_MAX_CHAN_IDX + 1)) {
+		/* touchscreen enabling */
+		return at91_adc_configure_touch(st, true);
+	}
+	/* if we are not in triggered mode, we cannot enable the buffer. */
+	if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES))
+		return -EINVAL;
+
+	/* we continue with the triggered buffer */
 	ret = at91_adc_dma_start(indio_dev);
 	if (ret) {
 		dev_err(&indio_dev->dev, "buffer postenable failed\n");
@@ -536,6 +913,18 @@ static int at91_adc_buffer_predisable(struct iio_dev *indio_dev)
 	int ret;
 	u8 bit;
 
+	/* check if we are disabling triggered buffer or the touchscreen */
+	if (bitmap_subset(indio_dev->active_scan_mask,
+			  &st->touch_st.channels_bitmask,
+			  AT91_SAMA5D2_MAX_CHAN_IDX + 1)) {
+		/* touchscreen disable */
+		return at91_adc_configure_touch(st, false);
+	}
+	/* if we are not in triggered mode, nothing to do here */
+	if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES))
+		return -EINVAL;
+
+	/* continue with the triggered buffer */
 	ret = iio_triggered_buffer_predisable(indio_dev);
 	if (ret < 0)
 		dev_err(&indio_dev->dev, "buffer predisable failed\n");
@@ -558,6 +947,10 @@ static int at91_adc_buffer_predisable(struct iio_dev *indio_dev)
 
 		if (!chan)
 			continue;
+		/* these channel types are virtual, no need to do anything */
+		if (chan->type == IIO_POSITIONRELATIVE ||
+		    chan->type == IIO_PRESSURE)
+			continue;
 		if (st->dma_st.dma_chan)
 			at91_adc_readl(st, chan->address);
 	}
@@ -613,6 +1006,7 @@ static void at91_adc_trigger_handler_nodma(struct iio_dev *indio_dev,
 {
 	struct at91_adc_state *st = iio_priv(indio_dev);
 	int i = 0;
+	int val;
 	u8 bit;
 
 	for_each_set_bit(bit, indio_dev->active_scan_mask,
@@ -622,7 +1016,24 @@ static void at91_adc_trigger_handler_nodma(struct iio_dev *indio_dev,
 
 		if (!chan)
 			continue;
-		st->buffer[i] = at91_adc_readl(st, chan->address);
+		/*
+		 * Our external trigger only supports the voltage channels.
+		 * In case someone requested a different type of channel
+		 * just put zeroes to buffer.
+		 * This should not happen because we check the scan mode
+		 * and scan mask when we enable the buffer, and we don't allow
+		 * the buffer to start with a mixed mask (voltage and something
+		 * else).
+		 * Thus, emit a warning.
+		 */
+		if (chan->type == IIO_VOLTAGE) {
+			val = at91_adc_readl(st, chan->address);
+			at91_adc_adjust_val_osr(st, &val);
+			st->buffer[i] = val;
+		} else {
+			st->buffer[i] = 0;
+			WARN(true, "This trigger cannot handle this type of channel");
+		}
 		i++;
 	}
 	iio_push_to_buffers_with_timestamp(indio_dev, st->buffer,
@@ -654,6 +1065,14 @@ static void at91_adc_trigger_handler_dma(struct iio_dev *indio_dev)
 	interval = div_s64((ns - st->dma_st.dma_ts), sample_count);
 
 	while (transferred_len >= sample_size) {
+		/*
+		 * for all the values in the current sample,
+		 * adjust the values inside the buffer for oversampling
+		 */
+		at91_adc_adjust_val_osr_array(st,
+					&st->dma_st.rx_buf[st->dma_st.buf_idx],
+					sample_size);
+
 		iio_push_to_buffers_with_timestamp(indio_dev,
 				(st->dma_st.rx_buf + st->dma_st.buf_idx),
 				(st->dma_st.dma_ts + interval * sample_index));
@@ -688,9 +1107,20 @@ static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
 
 static int at91_adc_buffer_