diff options
110 files changed, 6450 insertions, 1132 deletions
diff --git a/Documentation/devicetree/bindings/mips/cavium/cib.txt b/Documentation/devicetree/bindings/mips/cavium/cib.txt new file mode 100644 index 000000000000..f39a1aa2852b --- /dev/null +++ b/Documentation/devicetree/bindings/mips/cavium/cib.txt @@ -0,0 +1,43 @@ +* Cavium Interrupt Bus widget + +Properties: +- compatible: "cavium,octeon-7130-cib" + + Compatibility with cn70XX SoCs. + +- interrupt-controller: This is an interrupt controller. + +- reg: Two elements consisting of the addresses of the RAW and EN + registers of the CIB block + +- cavium,max-bits: The index (zero based) of the highest numbered bit + in the CIB block. + +- interrupt-parent: Always the CIU on the SoC. + +- interrupts: The CIU line to which the CIB block is connected. + +- #interrupt-cells: Must be <2>. The first cell is the bit within the + CIB. The second cell specifies the triggering semantics of the + line. + +Example: + + interrupt-controller@107000000e000 { + compatible = "cavium,octeon-7130-cib"; + reg = <0x10700 0x0000e000 0x0 0x8>, /* RAW */ + <0x10700 0x0000e100 0x0 0x8>; /* EN */ + cavium,max-bits = <23>; + + interrupt-controller; + interrupt-parent = <&ciu>; + interrupts = <1 24>; + /* Interrupts are specified by two parts: + * 1) Bit number in the CIB* registers + * 2) Triggering (1 - edge rising + * 2 - edge falling + * 4 - level active high + * 8 - level active low) + */ + #interrupt-cells = <2>; + }; diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 843713c05b79..c7a16904cd03 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -54,6 +54,7 @@ config MIPS select CPU_PM if CPU_IDLE select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_BINFMT_ELF_STATE + select SYSCTL_EXCEPTION_TRACE menu "Machine selection" @@ -376,8 +377,10 @@ config MIPS_MALTA select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R2 select SYS_HAS_CPU_MIPS32_R3_5 + select SYS_HAS_CPU_MIPS32_R6 select SYS_HAS_CPU_MIPS64_R1 select SYS_HAS_CPU_MIPS64_R2 + select SYS_HAS_CPU_MIPS64_R6 select SYS_HAS_CPU_NEVADA select SYS_HAS_CPU_RM7000 select SYS_SUPPORTS_32BIT_KERNEL @@ -1033,6 +1036,9 @@ config MIPS_MACHINE config NO_IOPORT_MAP def_bool n +config GENERIC_CSUM + bool + config GENERIC_ISA_DMA bool select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n @@ -1146,6 +1152,9 @@ config SOC_PNX8335 bool select SOC_PNX833X +config MIPS_SPRAM + bool + config SWAP_IO_SPACE bool @@ -1304,6 +1313,22 @@ config CPU_MIPS32_R2 specific type of processor in your system, choose those that one otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. +config CPU_MIPS32_R6 + bool "MIPS32 Release 6 (EXPERIMENTAL)" + depends on SYS_HAS_CPU_MIPS32_R6 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_MSA + select GENERIC_CSUM + select HAVE_KVM + select MIPS_O32_FP64_SUPPORT + help + Choose this option to build a kernel for release 6 or later of the + MIPS32 architecture. New MIPS processors, starting with the Warrior + family, are based on a MIPS32r6 processor. If you own an older + processor, you probably need to select MIPS32r1 or MIPS32r2 instead. + config CPU_MIPS64_R1 bool "MIPS64 Release 1" depends on SYS_HAS_CPU_MIPS64_R1 @@ -1339,6 +1364,21 @@ config CPU_MIPS64_R2 specific type of processor in your system, choose those that one otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. +config CPU_MIPS64_R6 + bool "MIPS64 Release 6 (EXPERIMENTAL)" + depends on SYS_HAS_CPU_MIPS64_R6 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_MSA + select GENERIC_CSUM + help + Choose this option to build a kernel for release 6 or later of the + MIPS64 architecture. New MIPS processors, starting with the Warrior + family, are based on a MIPS64r6 processor. If you own an older + processor, you probably need to select MIPS64r1 or MIPS64r2 instead. + config CPU_R3000 bool "R3000" depends on SYS_HAS_CPU_R3000 @@ -1539,7 +1579,7 @@ endchoice config CPU_MIPS32_3_5_FEATURES bool "MIPS32 Release 3.5 Features" depends on SYS_HAS_CPU_MIPS32_R3_5 - depends on CPU_MIPS32_R2 + depends on CPU_MIPS32_R2 || CPU_MIPS32_R6 help Choose this option to build a kernel for release 2 or later of the MIPS32 architecture including features from the 3.5 release such as @@ -1659,12 +1699,18 @@ config SYS_HAS_CPU_MIPS32_R2 config SYS_HAS_CPU_MIPS32_R3_5 bool +config SYS_HAS_CPU_MIPS32_R6 + bool + config SYS_HAS_CPU_MIPS64_R1 bool config SYS_HAS_CPU_MIPS64_R2 bool +config SYS_HAS_CPU_MIPS64_R6 + bool + config SYS_HAS_CPU_R3000 bool @@ -1764,11 +1810,11 @@ endmenu # config CPU_MIPS32 bool - default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 + default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R6 config CPU_MIPS64 bool - default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 + default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R6 # # These two indicate the revision of the architecture, either Release 1 or Release 2 @@ -1780,6 +1826,12 @@ config CPU_MIPSR1 config CPU_MIPSR2 bool default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON + select MIPS_SPRAM + +config CPU_MIPSR6 + bool + default y if CPU_MIPS32_R6 || CPU_MIPS64_R6 + select MIPS_SPRAM config EVA bool @@ -2013,6 +2065,19 @@ config MIPS_MT_FPAFF default y depends on MIPS_MT_SMP +config MIPSR2_TO_R6_EMULATOR + bool "MIPS R2-to-R6 emulator" + depends on CPU_MIPSR6 && !SMP + default y + help + Choose this option if you want to run non-R6 MIPS userland code. + Even if you say 'Y' here, the emulator will still be disabled by + default. You can enable it using the 'mipsr2emul' kernel option. + The only reason this is a build-time option is to save ~14K from the + final kernel image. +comment "MIPS R2-to-R6 emulator is only available for UP kernels" + depends on SMP && CPU_MIPSR6 + config MIPS_VPE_LOADER bool "VPE loader support." depends on SYS_SUPPORTS_MULTITHREADING && MODULES @@ -2148,7 +2213,7 @@ config CPU_HAS_SMARTMIPS here. config CPU_MICROMIPS - depends on 32BIT && SYS_SUPPORTS_MICROMIPS + depends on 32BIT && SYS_SUPPORTS_MICROMIPS && !CPU_MIPSR6 bool "microMIPS" help When this option is enabled the kernel will be built using the diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 88a9f433f6fc..3a2b775e8458 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -122,17 +122,4 @@ config SPINLOCK_TEST help Add several files to the debugfs to test spinlock speed. -config FP32XX_HYBRID_FPRS - bool "Run FP32 & FPXX code with hybrid FPRs" - depends on MIPS_O32_FP64_SUPPORT - help - The hybrid FPR scheme is normally used only when a program needs to - execute a mix of FP32 & FP64A code, since the trapping & emulation - that it entails is expensive. When enabled, this option will lead - to the kernel running programs which use the FP32 & FPXX FP ABIs - using the hybrid FPR scheme, which can be useful for debugging - purposes. - - If unsure, say N. - endmenu diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 2563a088d3b8..8f57fc72d62c 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -122,26 +122,8 @@ predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__ cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be)) cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le)) -# For smartmips configurations, there are hundreds of warnings due to ISA overrides -# in assembly and header files. smartmips is only supported for MIPS32r1 onwards -# and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or -# similar directives in the kernel will spam the build logs with the following warnings: -# Warning: the `smartmips' extension requires MIPS32 revision 1 or greater -# or -# Warning: the 64-bit MIPS architecture does not support the `smartmips' extension -# Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has -# been fixed properly. -cflags-$(CONFIG_CPU_HAS_SMARTMIPS) += $(call cc-option,-msmartmips) -Wa,--no-warn -cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,-mmicromips) - cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ -fno-omit-frame-pointer - -ifeq ($(CONFIG_CPU_HAS_MSA),y) -toolchain-msa := $(call cc-option-yn,-mhard-float -mfp64 -Wa$(comma)-mmsa) -cflags-$(toolchain-msa) += -DTOOLCHAIN_SUPPORTS_MSA -endif - |