Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS:

   - a number of fixes that didn't make the 3.19 release.

   - a number of cleanups.

   - preliminary support for Cavium's Octeon 3 SOCs which feature up to
     48 MIPS64 R3 cores with FPU and hardware virtualization.

   - support for MIPS R6 processors.

     Revision 6 of the MIPS architecture is a major revision of the MIPS
     architecture which does away with many of original sins of the
     architecture such as branch delay slots.  This and other changes in
     R6 require major changes throughout the entire MIPS core
     architecture code and make up for the lion share of this pull
     request.

   - finally some preparatory work for eXtendend Physical Address
     support, which allows support of up to 40 bit of physical address
     space on 32 bit processors"

     [ Ahh, MIPS can't leave the PAE brain damage alone.  It's like
       every CPU architect has to make that mistake, but pee in the snow
       by changing the TLA.  But whether it's called PAE, LPAE or XPA,
       it's horrid crud   - Linus ]

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (114 commits)
  MIPS: sead3: Corrected get_c0_perfcount_int
  MIPS: mm: Remove dead macro definitions
  MIPS: OCTEON: irq: add CIB and other fixes
  MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs.
  MIPS: OCTEON: More OCTEONIII support
  MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits.
  MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup.
  MIPS: OCTEON: Update octeon-model.h code for new SoCs.
  MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX
  MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h
  MIPS: OCTEON: Implement the core-16057 workaround
  MIPS: OCTEON: Delete unused COP2 saving code
  MIPS: OCTEON: Use correct instruction to read 64-bit COP0 register
  MIPS: OCTEON: Save and restore CP2 SHA3 state
  MIPS: OCTEON: Fix FP context save.
  MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs
  MIPS: boot: Provide more uImage options
  MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h
  MIPS: ip22-gio: Remove legacy suspend/resume support
  mips: pci: Add ifdef around pci_proc_domain
  ...

110 files changed, 6450 insertions, 1132 deletions

diff --git a/Documentation/devicetree/bindings/mips/cavium/cib.txt b/Documentation/devicetree/bindings/mips/cavium/cib.txt
new file mode 100644
index 000000000000..f39a1aa2852b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/cib.txt
@@ -0,0 +1,43 @@
+* Cavium Interrupt Bus widget
+
+Properties:
+- compatible: "cavium,octeon-7130-cib"
+
+  Compatibility with cn70XX SoCs.
+
+- interrupt-controller:  This is an interrupt controller.
+
+- reg: Two elements consisting of the addresses of the RAW and EN
+  registers of the CIB block
+
+- cavium,max-bits: The index (zero based) of the highest numbered bit
+  in the CIB block.
+
+- interrupt-parent:  Always the CIU on the SoC.
+
+- interrupts: The CIU line to which the CIB block is connected.
+
+- #interrupt-cells: Must be <2>.  The first cell is the bit within the
+   CIB.  The second cell specifies the triggering semantics of the
+   line.
+
+Example:
+
+	interrupt-controller@107000000e000 {
+		compatible = "cavium,octeon-7130-cib";
+		reg = <0x10700 0x0000e000 0x0 0x8>, /* RAW */
+		      <0x10700 0x0000e100 0x0 0x8>; /* EN */
+		cavium,max-bits = <23>;
+
+		interrupt-controller;
+		interrupt-parent = <&ciu>;
+		interrupts = <1 24>;
+		/* Interrupts are specified by two parts:
+		 * 1) Bit number in the CIB* registers
+		 * 2) Triggering (1 - edge rising
+		 *		  2 - edge falling
+		 *		  4 - level active high
+		 *		  8 - level active low)
+		 */
+		#interrupt-cells = <2>;
+	};
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 843713c05b79..c7a16904cd03 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -54,6 +54,7 @@ config MIPS
 	select CPU_PM if CPU_IDLE
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_BINFMT_ELF_STATE
+	select SYSCTL_EXCEPTION_TRACE
 
 menu "Machine selection"
 
@@ -376,8 +377,10 @@ config MIPS_MALTA
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_CPU_MIPS32_R3_5
+	select SYS_HAS_CPU_MIPS32_R6
 	select SYS_HAS_CPU_MIPS64_R1
 	select SYS_HAS_CPU_MIPS64_R2
+	select SYS_HAS_CPU_MIPS64_R6
 	select SYS_HAS_CPU_NEVADA
 	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -1033,6 +1036,9 @@ config MIPS_MACHINE
 config NO_IOPORT_MAP
 	def_bool n
 
+config GENERIC_CSUM
+	bool
+
 config GENERIC_ISA_DMA
 	bool
 	select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n
@@ -1146,6 +1152,9 @@ config SOC_PNX8335
 	bool
 	select SOC_PNX833X
 
+config MIPS_SPRAM
+	bool
+
 config SWAP_IO_SPACE
 	bool
 
@@ -1304,6 +1313,22 @@ config CPU_MIPS32_R2
 	  specific type of processor in your system, choose those that one
 	  otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
 
+config CPU_MIPS32_R6
+	bool "MIPS32 Release 6 (EXPERIMENTAL)"
+	depends on SYS_HAS_CPU_MIPS32_R6
+	select CPU_HAS_PREFETCH
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select CPU_SUPPORTS_MSA
+	select GENERIC_CSUM
+	select HAVE_KVM
+	select MIPS_O32_FP64_SUPPORT
+	help
+	  Choose this option to build a kernel for release 6 or later of the
+	  MIPS32 architecture.  New MIPS processors, starting with the Warrior
+	  family, are based on a MIPS32r6 processor. If you own an older
+	  processor, you probably need to select MIPS32r1 or MIPS32r2 instead.
+
 config CPU_MIPS64_R1
 	bool "MIPS64 Release 1"
 	depends on SYS_HAS_CPU_MIPS64_R1
@@ -1339,6 +1364,21 @@ config CPU_MIPS64_R2
 	  specific type of processor in your system, choose those that one
 	  otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
 
+config CPU_MIPS64_R6
+	bool "MIPS64 Release 6 (EXPERIMENTAL)"
+	depends on SYS_HAS_CPU_MIPS64_R6
+	select CPU_HAS_PREFETCH
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select CPU_SUPPORTS_MSA
+	select GENERIC_CSUM
+	help
+	  Choose this option to build a kernel for release 6 or later of the
+	  MIPS64 architecture.  New MIPS processors, starting with the Warrior
+	  family, are based on a MIPS64r6 processor. If you own an older
+	  processor, you probably need to select MIPS64r1 or MIPS64r2 instead.
+
 config CPU_R3000
 	bool "R3000"
 	depends on SYS_HAS_CPU_R3000
@@ -1539,7 +1579,7 @@ endchoice
 config CPU_MIPS32_3_5_FEATURES
 	bool "MIPS32 Release 3.5 Features"
 	depends on SYS_HAS_CPU_MIPS32_R3_5
-	depends on CPU_MIPS32_R2
+	depends on CPU_MIPS32_R2 || CPU_MIPS32_R6
 	help
 	  Choose this option to build a kernel for release 2 or later of the
 	  MIPS32 architecture including features from the 3.5 release such as
@@ -1659,12 +1699,18 @@ config SYS_HAS_CPU_MIPS32_R2
 config SYS_HAS_CPU_MIPS32_R3_5
 	bool
 
+config SYS_HAS_CPU_MIPS32_R6
+	bool
+
 config SYS_HAS_CPU_MIPS64_R1
 	bool
 
 config SYS_HAS_CPU_MIPS64_R2
 	bool
 
+config SYS_HAS_CPU_MIPS64_R6
+	bool
+
 config SYS_HAS_CPU_R3000
 	bool
 
@@ -1764,11 +1810,11 @@ endmenu
 #
 config CPU_MIPS32
 	bool
-	default y if CPU_MIPS32_R1 || CPU_MIPS32_R2
+	default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R6
 
 config CPU_MIPS64
 	bool
-	default y if CPU_MIPS64_R1 || CPU_MIPS64_R2
+	default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R6
 
 #
 # These two indicate the revision of the architecture, either Release 1 or Release 2
@@ -1780,6 +1826,12 @@ config CPU_MIPSR1
 config CPU_MIPSR2
 	bool
 	default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON
+	select MIPS_SPRAM
+
+config CPU_MIPSR6
+	bool
+	default y if CPU_MIPS32_R6 || CPU_MIPS64_R6
+	select MIPS_SPRAM
 
 config EVA
 	bool
@@ -2013,6 +2065,19 @@ config MIPS_MT_FPAFF
 	default y
 	depends on MIPS_MT_SMP
 
+config MIPSR2_TO_R6_EMULATOR
+	bool "MIPS R2-to-R6 emulator"
+	depends on CPU_MIPSR6 && !SMP
+	default y
+	help
+	  Choose this option if you want to run non-R6 MIPS userland code.
+	  Even if you say 'Y' here, the emulator will still be disabled by
+	  default. You can enable it using the 'mipsr2emul' kernel option.
+	  The only reason this is a build-time option is to save ~14K from the
+	  final kernel image.
+comment "MIPS R2-to-R6 emulator is only available for UP kernels"
+	depends on SMP && CPU_MIPSR6
+
 config MIPS_VPE_LOADER
 	bool "VPE loader support."
 	depends on SYS_SUPPORTS_MULTITHREADING && MODULES
@@ -2148,7 +2213,7 @@ config CPU_HAS_SMARTMIPS
 	  here.
 
 config CPU_MICROMIPS
-	depends on 32BIT && SYS_SUPPORTS_MICROMIPS
+	depends on 32BIT && SYS_SUPPORTS_MICROMIPS && !CPU_MIPSR6
 	bool "microMIPS"