diff options
41 files changed, 4536 insertions, 675 deletions
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt new file mode 100644 index 000000000000..3983c11e062c --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt @@ -0,0 +1,60 @@ +Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs + +This file documents the properties in addition to those available in +the MTD NAND bindings. + +Required properties: +- compatible : contains one of: + - "amlogic,meson-gxl-nfc" + - "amlogic,meson-axg-nfc" +- clocks : + A list of phandle + clock-specifier pairs for the clocks listed + in clock-names. + +- clock-names: Should contain the following: + "core" - NFC module gate clock + "device" - device clock from eMMC sub clock controller + "rx" - rx clock phase + "tx" - tx clock phase + +- amlogic,mmc-syscon : Required for NAND clocks, it's shared with SD/eMMC + controller port C + +Optional children nodes: +Children nodes represent the available nand chips. + +Other properties: +see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. + +Example demonstrate on AXG SoC: + + sd_emmc_c_clkc: mmc@7000 { + compatible = "amlogic,meson-axg-mmc-clkc", "syscon"; + reg = <0x0 0x7000 0x0 0x800>; + }; + + nand-controller@7800 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x7800 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>; + + clocks = <&clkc CLKID_SD_EMMC_C>, + <&sd_emmc_c_clkc CLKID_MMC_DIV>, + <&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>, + <&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>; + clock-names = "core", "device", "rx", "tx"; + amlogic,mmc-syscon = <&sd_emmc_c_clkc>; + + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins>; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + nand-on-flash-bbt; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt index bb2075df9b38..4345c3a6f530 100644 --- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt @@ -4,6 +4,7 @@ Required properties: - compatible : should be one of the following: Generic default - "cdns,qspi-nor". For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor". + For TI AM654 SoC - "ti,am654-ospi", "cdns,qspi-nor". - reg : Contains two entries, each of which is a tuple consisting of a physical address and length. The first entry is the address and length of the controller register set. The second entry is the diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt index 56d3668e2c50..a12e3b5c495d 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt @@ -1,4 +1,4 @@ -* Serial NOR flash controller for MTK MT81xx (and similar) +* Serial NOR flash controller for MediaTek SoCs Required properties: - compatible: For mt8173, compatible should be "mediatek,mt8173-nor", @@ -10,6 +10,7 @@ Required properties: "mediatek,mt2712-nor", "mediatek,mt8173-nor" "mediatek,mt7622-nor", "mediatek,mt8173-nor" "mediatek,mt7623-nor", "mediatek,mt8173-nor" + "mediatek,mt7629-nor", "mediatek,mt8173-nor" "mediatek,mt8173-nor" - reg: physical base address and length of the controller's register - clocks: the phandle of the clocks needed by the nor controller diff --git a/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt b/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt new file mode 100644 index 000000000000..ad2bef826582 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt @@ -0,0 +1,61 @@ +STMicroelectronics Flexible Memory Controller 2 (FMC2) +NAND Interface + +Required properties: +- compatible: Should be one of: + * st,stm32mp15-fmc2 +- reg: NAND flash controller memory areas. + First region contains the register location. + Regions 2 to 4 respectively contain the data, command, + and address space for CS0. + Regions 5 to 7 contain the same areas for CS1. +- interrupts: The interrupt number +- pinctrl-0: Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt) +- clocks: The clock needed by the NAND flash controller + +Optional properties: +- resets: Reference to a reset controller asserting the FMC controller +- dmas: DMA specifiers (see: dma/stm32-mdma.txt) +- dma-names: Must be "tx", "rx" and "ecc" + +* NAND device bindings: + +Required properties: +- reg: describes the CS lines assigned to the NAND device. + +Optional properties: +- nand-on-flash-bbt: see nand.txt +- nand-ecc-strength: see nand.txt +- nand-ecc-step-size: see nand.txt + +The following ECC strength and step size are currently supported: + - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming) + - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4) + - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) (default) + +Example: + + fmc: nand-controller@58002000 { + compatible = "st,stm32mp15-fmc2"; + reg = <0x58002000 0x1000>, + <0x80000000 0x1000>, + <0x88010000 0x1000>, + <0x88020000 0x1000>, + <0x81000000 0x1000>, + <0x89010000 0x1000>, + <0x89020000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc FMC_K>; + resets = <&rcc FMC_R>; + pinctrl-names = "default"; + pinctrl-0 = <&fmc_pins_a>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + nand-on-flash-bbt; + #address-cells = <1>; + #size-cells = <1>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index dce5c099f43c..b40ec3f4b943 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9866,6 +9866,13 @@ F: drivers/media/platform/meson/ao-cec.c F: Documentation/devicetree/bindings/media/meson-ao-cec.txt T: git git://linuxtv.org/media_tree.git +MESON NAND CONTROLLER DRIVER FOR AMLOGIC SOCS +M: Liang Yang <liang.yang@amlogic.com> +L: linux-mtd@lists.infradead.org +S: Maintained +F: drivers/mtd/nand/raw/meson_* +F: Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt + MICROBLAZE ARCHITECTURE M: Michal Simek <monstr@monstr.eu> W: http://www.monstr.eu/fdt/ @@ -14339,6 +14346,7 @@ F: arch/arm/mach-spear/ SPI NOR SUBSYSTEM M: Marek Vasut <marek.vasut@gmail.com> +M: Tudor Ambarus <tudor.ambarus@microchip.com> L: linux-mtd@lists.infradead.org W: http://www.linux-mtd.infradead.org/ Q: http://patchwork.ozlabs.org/project/linux-mtd/list/ diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 6e8e7b1bb34b..79a53cb8507b 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -756,7 +756,8 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd, } numvirtchips = cfi->numchips * numparts; - newcfi = kmalloc(sizeof(struct cfi_private) + numvirtchips * sizeof(struct flchip), GFP_KERNEL); + newcfi = kmalloc(struct_size(newcfi, chips, numvirtchips), + GFP_KERNEL); if (!newcfi) return -ENOMEM; shared = kmalloc_array(cfi->numchips, diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c index 837b04ab96a9..839ed40625d6 100644 --- a/drivers/mtd/chips/gen_probe.c +++ b/drivers/mtd/chips/gen_probe.c @@ -135,7 +135,7 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi * our caller, and copy the appropriate data into them. */ - retcfi = kmalloc(sizeof(struct cfi_private) + cfi.numchips * sizeof(struct flchip), GFP_KERNEL); + retcfi = kmalloc(struct_size(retcfi, chips, cfi.numchips), GFP_KERNEL); if (!retcfi) { kfree(cfi.cfiq); diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index 4c94fc096696..7754803e3463 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -1767,8 +1767,8 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) switch (chip_id) { case DOC_CHIPID_G3: - mtd->name = kasprintf(GFP_KERNEL, "docg3.%d", - docg3->device_id); + mtd->name = devm_kasprintf(docg3->dev, GFP_KERNEL, "docg3.%d", + docg3->device_id); if (!mtd->name) return -ENOMEM; docg3->max_block = 2047; @@ -1872,7 +1872,7 @@ nomem3: nomem2: kfree(docg3); nomem1: - return ERR_PTR(ret); + return ret ? ERR_PTR(ret) : NULL; } /** @@ -1886,7 +1886,6 @@ static void doc_release_device(struct mtd_info *mtd) mtd_device_unregister(mtd); kfree(docg3->bbt); kfree(docg3); - kfree(mtd->name); kfree(mtd); } diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index c4a1d04b8c80..651bab6d4e31 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -195,7 +195,14 @@ static int m25p_probe(struct spi_mem *spimem) spi_mem_set_drvdata(spimem, flash); flash->spimem = spimem; - if (spi->mode & SPI_RX_QUAD) { + if (spi->mode & SPI_RX_OCTAL) { + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8; + + if (spi->mode & SPI_TX_OCTAL) + hwcaps.mask |= (SNOR_HWCAPS_READ_1_8_8 | + SNOR_HWCAPS_PP_1_1_8 | + SNOR_HWCAPS_PP_1_8_8); + } else if (spi->mode & SPI_RX_QUAD) { hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; if (spi->mode & SPI_TX_QUAD) diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c index 46238796145f..1c97fabc4bf9 100644 --- a/drivers/mtd/devices/mtdram.c +++ b/drivers/mtd/devices/mtdram.c @@ -24,14 +24,12 @@ static unsigned long writebuf_size = 64; #define MTDRAM_TOTAL_SIZE (total_size * 1024) #define MTDRAM_ERASE_SIZE (erase_size * 1024) -#ifdef MODULE module_param(total_size, ulong, 0); MODULE_PARM_DESC(total_size, "Total device size in KiB"); module_param(erase_size, ulong, 0); MODULE_PARM_DESC(erase_size, "Device erase block size in KiB"); module_param(writebuf_size, ulong, 0); MODULE_PARM_DESC(writebuf_size, "Device write buf size in Bytes (Default: 64)"); -#endif // We could store these in the mtd structure, but we only support 1 device.. static struct mtd_info *mtd_info; diff --git a/drivers/mtd/lpddr/qinfo_probe.c b/drivers/mtd/lpddr/qinfo_probe.c index 69f2112340b1..175bdc3b72f4 100644 --- a/drivers/mtd/lpddr/qinfo_probe.c +++ b/drivers/mtd/lpddr/qinfo_probe.c @@ -181,8 +181,8 @@ static struct lpddr_private *lpddr_probe_chip(struct map_info *map) lpddr.numchips = 1; numvirtchips = lpddr.numchips * lpddr.qinfo->HWPartsNum; - retlpddr = kzalloc(sizeof(struct lpddr_private) + - numvirtchips * sizeof(struct flchip), GFP_KERNEL); + retlpddr = kzalloc(struct_size(retlpddr, chips, numvirtchips), + GFP_KERNEL); if (!retlpddr) return NULL; diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 3ef01baef9b6..76b4264936ff 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -155,7 +155,6 @@ static ssize_t mtd_flags_show(struct device *dev, struct mtd_info *mtd = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "0x%lx\n", (unsigned long)mtd->flags); - } static DEVICE_ATTR(flags, S_IRUGO, mtd_flags_show, NULL); @@ -166,7 +165,6 @@ static ssize_t mtd_size_show(struct device *dev, return snprintf(buf, PAGE_SIZE, "%llu\n", (unsigned long long)mtd->size); - } static DEVICE_ATTR(size, S_IRUGO, mtd_size_show, NULL); @@ -176,7 +174,6 @@ static ssize_t mtd_erasesize_show(struct device *dev, struct mtd_info *mtd = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->erasesize); - } static DEVICE_ATTR(erasesize, S_IRUGO, mtd_erasesize_show, NULL); @@ -186,7 +183,6 @@ static ssize_t mtd_writesize_show(struct device *dev, struct mtd_info *mtd = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->writesize); - } static DEVICE_ATTR(writesize, S_IRUGO, mtd_writesize_show, NULL); @@ -197,7 +193,6 @@ static ssize_t mtd_subpagesize_show(struct device *dev, unsigned int subpagesize = mtd->writesize >> mtd->subpage_sft; return snprintf(buf, PAGE_SIZE, "%u\n", subpagesize); - } static DEVICE_ATTR(subpagesize, S_IRUGO, mtd_subpagesize_show, NULL); @@ -207,7 +202,6 @@ static ssize_t mtd_oobsize_show(struct device *dev, struct mtd_info *mtd = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->oobsize); - } static DEVICE_ATTR(oobsize, S_IRUGO, mtd_oobsize_show, NULL); @@ -226,7 +220,6 @@ static ssize_t mtd_numeraseregions_show(struct device *dev, struct mtd_info *mtd = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "%u\n", mtd->numeraseregions); - } static DEVICE_ATTR(numeraseregions, S_IRUGO, mtd_numeraseregions_show, NULL); @@ -237,7 +230,6 @@ static ssize_t mtd_name_show(struct device *dev, struct mtd_info *mtd = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "%s\n", mtd->name); - } static DEVICE_ATTR(name, S_IRUGO, mtd_name_show, NULL); @@ -560,6 +552,14 @@ int add_mtd_device(struct mtd_info *mtd) BUG_ON(mtd->writesize == 0); + /* + * MTD drivers should implement ->_{write,read}() or + * ->_{write,read}_oob(), but not both. + */ + if (WARN_ON((mtd->_write && mtd->_write_oob) || + (mtd->_read && mtd->_read_oob))) + return -EINVAL; + if (WARN_ON((!mtd->erasesize || !mtd->_erase) && !(mtd->flags & MTD_NO_ERASE))) return -EINVAL; @@ -1090,67 +1090,32 @@ EXPORT_SYMBOL_GPL(mtd_get_unmapped_area); int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { - int ret_code; - *retlen = 0; - if (from < 0 || from >= mtd->size || len > mtd->size - from) - return -EINVAL; - if (!len) - return 0; + struct mtd_oob_ops ops = { + .len = len, + .datbuf = buf, + }; + int ret; - ledtrig_mtd_activity(); - /* - * In the absence of an error, drivers return a non-negative integer - * representing the maximum number of bitflips that were corrected on - * any one ecc region (if applicable; zero otherwise). - */ - if (mtd->_read) { - ret_code = mtd->_read(mtd, from, len, retlen, buf); - } else if (mtd->_read_oob) { - struct mtd_oob_ops ops = { - .len = len, - .datbuf = buf, - }; - - ret_code = mtd->_read_oob(mtd, from, &ops); - *retlen = ops.retlen; - } else { - return -ENOTSUPP; - } + ret = mtd_read_oob(mtd, from, &ops); + *retlen = ops.retlen; - if (unlikely(ret_code < 0)) - return ret_code; - if (mtd->ecc_strength == 0) - return 0; /* device lacks ecc */ - return ret_code >= mtd->bitflip_threshold ? -EUCLEAN : 0; + return ret; } EXPORT_SYMBOL_GPL(mtd_read); int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { - *retlen = 0; - if (to < 0 || to >= mtd->size || len > mtd->size - to) - return -EINVAL; - if ((!mtd->_write && !mtd->_write_oob) || - !(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (!len) - return 0; - ledtrig_mtd_activity(); + struct mtd_oob_ops ops = { + .len = len, + .datbuf = (u8 *)buf, + }; + int ret; - if (!mtd->_write) { - struct mtd_oob_ops ops = { - .len = len, - .datbuf = (u8 *)buf, - }; - int ret; + ret = mtd_write_oob(mtd, to, &ops); + *retlen = ops.retlen; - ret = mtd->_write_oob(mtd, to, &ops); - *retlen = ops.retlen; - return ret; - } - - return mtd->_write(mtd, to, len, retlen, buf); + return ret; } EXPORT_SYMBOL_GPL(mtd_write); diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 1a55d3e3d4c5..e604625e2dfa 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -541,4 +541,21 @@ config MTD_NAND_TEGRA is supported. Extra OOB bytes when using HW ECC are currently not supported. +config MTD_NAND_STM32_FMC2 + tristate "Support for NAND controller on STM32MP SoCs" + depends on MACH_STM32MP157 || COMPILE_TEST + help + Enables support for NAND Flash chips on SoCs containing the FMC2 + NAND controller. This controller is found on STM32MP SoCs. + The controller supports a maximum 8k page size and supports + a maximum 8-bit correction error per sector of 512 bytes. + +config MTD_NAND_MESON + tristate "Support for NAND controller on Amlogic's Meson SoCs" + depends on ARCH_MESON || COMPILE_TEST + select MFD_SYSCON + help + Enables support for NAND controller on Amlogic's Meson SoCs. + This controller is found on Meson SoCs. + endif # MTD_NAND diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index 57159b349054..5a5a72f0793e 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -56,6 +56,8 @@ obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/ obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o +obj-$(CONFIG_MTD_NAND_STM32_FMC2) += stm32_fmc2_nand.o +obj-$(CONFIG_MTD_NAND_MESON) += meson_nand.o nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o nand-objs += nand_onfi.o diff --git a/drivers/mtd/nand/raw/atmel/pmecc.c b/drivers/mtd/nand/raw/atmel/pmecc.c index 555a74e15269..9d3997840889 100644 --- a/drivers/mtd/nand/raw/atmel/pmecc.c +++ b/drivers/mtd/nand/raw/atmel/pmecc.c @@ -876,23 +876,32 @@ static struct atmel_pmecc *atmel_pmecc_get_by_node(struct device *userdev, { struct platform_device *pdev; struct atmel_pmecc *pmecc, **ptr; + int ret; pdev = of_find_device_by_node(np); - if (!pdev || !platform_get_drvdata(pdev)) + if (!pdev) return ERR_PTR(-EPROBE_DEFER); + pmecc = platform_get_drvdata(pdev); + if (!pmecc) { + ret = -EPROBE_DEFER; + goto err_put_device; + } ptr = devres_alloc(devm_atmel_pmecc_put, sizeof(*ptr), GFP_KERNEL); - if (!ptr) - return ERR_PTR(-ENOMEM); - - get_device(&pdev->dev); - pmecc = platform_get_drvdata(pdev); + if (!ptr) { + ret = -ENOMEM; + goto err_put_device; + } *ptr = pmecc; devres_add(userdev, ptr); return pmecc; + +err_put_device: + put_device(&pdev->dev); + return ERR_PTR(ret); } static const int atmel_pmecc_strengths[] = { 2, 4, 8, 12, 24, 32 }; diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c index 6e8edc9375dd..24aeafc67cd4 100644 --- a/drivers/mtd/nand/raw/denali.c +++ b/drivers/mtd/nand/raw/denali.c @@ -37,9 +37,6 @@ #define DENALI_MAP11_ADDR ((DENALI_MAP11) | 1) /* address cycle */ #define DENALI_MAP11_DATA ((DENALI_MAP11) | 2) /* data cycle */ -/* MAP10 commands */ -#define DENALI_ERASE 0x01 - #define DENALI_BANK(denali) ((denali)->active_bank << 24) #define DENALI_INVALID_BANK -1 @@ -476,7 +473,7 @@ static void denali_setup_dma32(struct denali_nand_info *denali, } static int denali_pio_read(struct denali_nand_info *denali, void *buf, - size_t size, int page, int raw) + size_t size, int page) { u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page; uint32_t *buf32 = (uint32_t *)buf; @@ -504,7 +501,7 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf, } static int denali_pio_write(struct denali_nand_info *denali, - const void *buf, size_t size, int page, int raw) + const void *buf, size_t size, int page) { u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page; const uint32_t *buf32 = (uint32_t *)buf; @@ -525,16 +522,16 @@ static int denali_pio_write(struct denali_nand_info *denali, } static int denali_pio_xfer(struct denali_nand_info *denali, void *buf, - size_t size, int page, int raw, int write) + size_t size, int page, int write) { if (write) - return denali_pio_write(denali, buf, size, page, raw); + return denali_pio_write(denali, buf, size, page); else - return denali_pio_read(denali, buf, size, page, raw); + return denali_pio_read(denali, buf, size, page); } static int denali_dma_xfer(struct denali_nand_info *denali, void *buf, - size_t size, int page, int raw, int write) + size_t size, int page, int write) { dma_addr_t dma_addr; uint32_t irq_mask, irq_status, ecc_err_mask; @@ -544,7 +541,7 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf, dma_addr = dma_map_single(denali->dev, buf, size, dir); if (dma_mapping_error(denali->dev, dma_addr)) { dev_dbg(denali->dev, "Failed to DMA-map buffer. Trying PIO.\n"); - return denali_pio_xfer(denali, buf, size, page, raw, write); + return denali_pio_xfer(denali, buf, size, page, write); } if (write) { @@ -598,9 +595,9 @@ static int denali_data_xfer(struct denali_nand_info *denali, void *buf, denali->reg + TRANSFER_SPARE_REG); if (denali->dma_avail) - return denali_dma_xfer(denali, buf, size, page, raw, write); + return denali_dma_xfer(denali, buf, size, page, write); else - return denali_pio_xfer(denali, buf, size, page, raw, write); + return denali_pio_xfer(denali, buf, size, page, write); } static void denali_oob_xfer(struct mtd_info *mtd, struct nand_chip *chip, @@ -754,9 +751,6 @@ static int denali_read_oob(struct nand_chip *chip, int page) static int denali_write_oob(struct nand_chip *chip, int page) { struct mtd_info *mtd = nand_to_mtd(chip); - struct denali_nand_info *denali = mtd_to_denali(mtd); - - denali_reset_irq(denali); denali_oob_xfer(mtd, chip, page, 1); @@ -903,23 +897,6 @@ static int denali_waitfunc(struct nand_chip *chip) return irq_status & INTR__INT_ACT ? 0 : NAND_STATUS_FAIL; } -static int denali_erase(struct nand_chip *chip, int page) -{ - struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip)); - uint32_t irq_status; - - denali_reset_irq(denali); - - denali->host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page, - DENALI_ERASE); - - /* wait for erase to complete or failure to occur */ - irq_status = denali_wait_for_irq(denali, - INTR__ERASE_COMP | INTR__ERASE_FAIL); - - return irq_status & INTR__ERASE_COMP ? 0 : -EIO; -} - static int denali_setup_data_interface(struct nand_chip *chip, int chipnr, const struct nand_data_interface *conf) { @@ -1244,7 +1221,6 @@ static int denali_attach_chip(struct nand_chip *chip) chip->ecc.write_page_raw = denali_write_page_raw; chip->ecc.read_oob = denali_read_oob; chip->ecc.write_oob = denali_write_oob; - chip->legacy.erase = denali_erase; ret = denali_multidev_fixup(denali); if (ret) diff --git a/drivers/mtd/nand/raw/denali.h b/drivers/mtd/nand/raw/denali.h index 25c00601b8b3..c8c2620fc736 100644 --- a/drivers/mtd/nand/raw/denali.h +++ b/drivers/mtd/nand/raw/denali.h @@ -304,7 +304,6 @@ struct denali_nand_info { u32 irq_status; /* interrupts that have happened */ int irq; void *buf; /* for syndrome layout conversion */ - dma_addr_t dma_addr; int dma_avail; /* can support DMA? */ int devs_per_cs; /* devices connected in parallel */ int oob_skip_bytes; /* number of bytes reserved for BBM */ diff --git a/drivers/mtd/nand/raw/denali_dt.c b/drivers/mtd/nand/raw/denali_dt.c index 7c6a8a426606..0b5ae2418815 100644 --- a/drivers/mtd/nand/raw/denali_dt.c +++ b/drivers/mtd/nand/raw/denali_dt.c @@ -109,25 +109,17 @@ static int denali_dt_probe(struct platform_device *pdev) if (IS_ERR(denali->host)) return PTR_ERR(denali->host); - /* - * A single anonymous clock is supported for the backward compatibility. - * New platforms should support all the named clocks. - */ dt->clk = devm_clk_get(dev, "nand"); if (IS_ERR(dt->clk)) - dt->clk = devm_clk_get(dev, NULL); - if (IS_ERR(dt->clk)) { - dev_err(dev, "no clk available\n"); return PTR_ERR(dt->clk); - } dt->clk_x = devm_clk_get(dev, "nand_x"); if (IS_ERR(dt->clk_x)) - dt->clk_x = NULL; + return PTR_ERR(dt->clk_x); dt->clk_ecc = devm_clk_get(dev, "ecc"); if (IS_ERR(dt->clk_ecc)) - dt->clk_ecc = NULL; + return PTR_ERR(dt->clk_ecc); ret = clk_prepare_enable(dt->clk); if (ret) @@ -141,19 +133,8 @@ static int denali_dt_probe(struct platform_device *pdev) if (ret) goto out_disable_clk_x; - if (dt->clk_x) { - denali->clk_rate = clk_get_rate(dt->clk); - denali->clk_x_rate = clk_get_rate(dt->clk_x); - } else { - /* - * Hardcode the clock rates for the backward compatibility. - * This works for both SOCFPGA and UniPhier. - */ - dev_notice(dev, - "necessary clock is missing. default clock rates are used.\n"); - denali->clk_rate = 50000000; - denali->clk_x_rate = 200000000; - } + denali->clk_rate = clk_get_rate(dt->clk); + denali->clk_x_rate = clk_get_rate(dt->clk_x); ret = denali_init(denali); if (ret) diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c index c9149a37f8f0..6c7ca41354be 100644 |