Merge tag 'mtd/for-5.1' of git://git.infradead.org/linux-mtd

Pull MTD updates from Boris Brezillon:
 "Core MTD changes:
   - Use struct_size() where appropriate
   - mtd_{read,write}() as wrappers around mtd_{read,write}_oob()
   - Fix misuse of PTR_ERR() in docg3
   - Coding style improvements in mtdcore.c

  SPI NOR changes:
    Core changes:
     - Add support of octal mode I/O transfer
     - Add a bunch of SPI NOR entries to the flash_info table

    SPI NOR controller driver changes:
     - cadence-quadspi:
        * Add support for Octal SPI controller
        * write upto 8-bytes data in STIG mode
     - mtk-quadspi:
        * rename config to a common one
        * add SNOR_HWCAPS_READ to spi_nor_hwcaps mask
     - Add Tudor as SPI-NOR co-maintainer

  NAND changes:
    NAND core changes:
     - Fourth batch of fixes/cleanup to the raw NAND core impacting
       various controller drivers (Sunxi, Marvell, MTK, TMIO, OMAP2).
     - Check the return code of nand_reset() and nand_readid_op().
     - Remove ->legacy.erase and single_erase().
     - Simplify the locking.
     - Several implicit fall through annotations.

    Raw NAND controllers drivers changes:
     - Fix various possible object reference leaks (MTK, JZ4780, Atmel)
     - ST:
        * Add support for STM32 FMC2 NAND flash controller
     - Meson:
        * Add support for Amlogic NAND flash controller
     - Denali:
        * Several cleanup patches
     - Sunxi:
        * Several cleanup patches
     - FSMC:
        * Disable NAND on remove()
        * Reset NAND timings on resume()

    SPI-NAND drivers changes:
     - Toshiba:
        * Add support for all Toshiba products.
     - Macronix:
        * Fix ECC status read.
     - Gigadevice:
        * Add support for GD5F1GQ4UExxG"

* tag 'mtd/for-5.1' of git://git.infradead.org/linux-mtd: (64 commits)
  mtd: spi-nor: Fix wrong abbreviation HWCPAS
  mtd: spi-nor: cadence-quadspi: fix spelling mistake: "Couldnt't" -> "Couldn't"
  mtd: spi-nor: Add support for en25qh64
  mtd: spi-nor: Add support for MX25V8035F
  mtd: spi-nor: Add support for EN25Q80A
  mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller
  dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC
  mtd: spi-nor: split s25fl128s into s25fl128s0 and s25fl128s1
  mtd: spi-nor: cadence-quadspi: write upto 8-bytes data in STIG mode
  mtd: spi-nor: Add support for mx25u3235f
  mtd: rawnand: denali_dt: remove single anonymous clock support
  mtd: rawnand: mtk: fix possible object reference leak
  mtd: rawnand: jz4780: fix possible object reference leak
  mtd: rawnand: atmel: fix possible object reference leak
  mtd: rawnand: fsmc: Disable NAND on remove()
  mtd: rawnand: fsmc: Reset NAND timings on resume()
  mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG
  mtd: rawnand: denali: remove unused dma_addr field from denali_nand_info
  mtd: rawnand: denali: remove unused function argument 'raw'
  mtd: rawnand: denali: remove unneeded denali_reset_irq() call
  ...

41 files changed, 4536 insertions, 675 deletions

diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
new file mode 100644
index 000000000000..3983c11e062c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
@@ -0,0 +1,60 @@
+Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
+
+This file documents the properties in addition to those available in
+the MTD NAND bindings.
+
+Required properties:
+- compatible : contains one of:
+  - "amlogic,meson-gxl-nfc"
+  - "amlogic,meson-axg-nfc"
+- clocks     :
+	A list of phandle + clock-specifier pairs for the clocks listed
+	in clock-names.
+
+- clock-names: Should contain the following:
+	"core" - NFC module gate clock
+	"device" - device clock from eMMC sub clock controller
+	"rx" - rx clock phase
+	"tx" - tx clock phase
+
+- amlogic,mmc-syscon	: Required for NAND clocks, it's shared with SD/eMMC
+				controller port C
+
+Optional children nodes:
+Children nodes represent the available nand chips.
+
+Other properties:
+see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
+
+Example demonstrate on AXG SoC:
+
+	sd_emmc_c_clkc: mmc@7000 {
+		compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
+		reg = <0x0 0x7000 0x0 0x800>;
+	};
+
+	nand-controller@7800 {
+		compatible = "amlogic,meson-axg-nfc";
+		reg = <0x0 0x7800 0x0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+
+		clocks = <&clkc CLKID_SD_EMMC_C>,
+			<&sd_emmc_c_clkc CLKID_MMC_DIV>,
+			<&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
+			<&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
+		clock-names = "core", "device", "rx", "tx";
+		amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nand_pins>;
+
+		nand@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nand-on-flash-bbt;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
index bb2075df9b38..4345c3a6f530 100644
--- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
@@ -4,6 +4,7 @@ Required properties:
 - compatible : should be one of the following:
 	Generic default - "cdns,qspi-nor".
 	For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
+	For TI AM654 SoC  - "ti,am654-ospi", "cdns,qspi-nor".
 - reg : Contains two entries, each of which is a tuple consisting of a
 	physical address and length. The first entry is the address and
 	length of the controller register set. The second entry is the
diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
index 56d3668e2c50..a12e3b5c495d 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
@@ -1,4 +1,4 @@
-* Serial NOR flash controller for MTK MT81xx (and similar)
+* Serial NOR flash controller for MediaTek SoCs
 
 Required properties:
 - compatible: 	  For mt8173, compatible should be "mediatek,mt8173-nor",
@@ -10,6 +10,7 @@ Required properties:
 		  "mediatek,mt2712-nor", "mediatek,mt8173-nor"
 		  "mediatek,mt7622-nor", "mediatek,mt8173-nor"
 		  "mediatek,mt7623-nor", "mediatek,mt8173-nor"
+		  "mediatek,mt7629-nor", "mediatek,mt8173-nor"
 		  "mediatek,mt8173-nor"
 - reg: 		  physical base address and length of the controller's register
 - clocks: 	  the phandle of the clocks needed by the nor controller
diff --git a/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt b/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt
new file mode 100644
index 000000000000..ad2bef826582
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt
@@ -0,0 +1,61 @@
+STMicroelectronics Flexible Memory Controller 2 (FMC2)
+NAND Interface
+
+Required properties:
+- compatible: Should be one of:
+              * st,stm32mp15-fmc2
+- reg: NAND flash controller memory areas.
+       First region contains the register location.
+       Regions 2 to 4 respectively contain the data, command,
+       and address space for CS0.
+       Regions 5 to 7 contain the same areas for CS1.
+- interrupts: The interrupt number
+- pinctrl-0: Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
+- clocks: The clock needed by the NAND flash controller
+
+Optional properties:
+- resets: Reference to a reset controller asserting the FMC controller
+- dmas: DMA specifiers (see: dma/stm32-mdma.txt)
+- dma-names: Must be "tx", "rx" and "ecc"
+
+* NAND device bindings:
+
+Required properties:
+- reg: describes the CS lines assigned to the NAND device.
+
+Optional properties:
+- nand-on-flash-bbt: see nand.txt
+- nand-ecc-strength: see nand.txt
+- nand-ecc-step-size: see nand.txt
+
+The following ECC strength and step size are currently supported:
+ - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming)
+ - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4)
+ - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) (default)
+
+Example:
+
+	fmc: nand-controller@58002000 {
+		compatible = "st,stm32mp15-fmc2";
+		reg = <0x58002000 0x1000>,
+		      <0x80000000 0x1000>,
+		      <0x88010000 0x1000>,
+		      <0x88020000 0x1000>,
+		      <0x81000000 0x1000>,
+		      <0x89010000 0x1000>,
+		      <0x89020000 0x1000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc FMC_K>;
+		resets = <&rcc FMC_R>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fmc_pins_a>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nand@0 {
+			reg = <0>;
+			nand-on-flash-bbt;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index dce5c099f43c..b40ec3f4b943 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9866,6 +9866,13 @@ F:	drivers/media/platform/meson/ao-cec.c
 F:	Documentation/devicetree/bindings/media/meson-ao-cec.txt
 T:	git git://linuxtv.org/media_tree.git
 
+MESON NAND CONTROLLER DRIVER FOR AMLOGIC SOCS
+M:	Liang Yang <liang.yang@amlogic.com>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/nand/raw/meson_*
+F:	Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
+
 MICROBLAZE ARCHITECTURE
 M:	Michal Simek <monstr@monstr.eu>
 W:	http://www.monstr.eu/fdt/
@@ -14339,6 +14346,7 @@ F:	arch/arm/mach-spear/
 
 SPI NOR SUBSYSTEM
 M:	Marek Vasut <marek.vasut@gmail.com>
+M:	Tudor Ambarus <tudor.ambarus@microchip.com>
 L:	linux-mtd@lists.infradead.org
 W:	http://www.linux-mtd.infradead.org/
 Q:	http://patchwork.ozlabs.org/project/linux-mtd/list/
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 6e8e7b1bb34b..79a53cb8507b 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -756,7 +756,8 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
 		}
 
 		numvirtchips = cfi->numchips * numparts;
-		newcfi = kmalloc(sizeof(struct cfi_private) + numvirtchips * sizeof(struct flchip), GFP_KERNEL);
+		newcfi = kmalloc(struct_size(newcfi, chips, numvirtchips),
+				 GFP_KERNEL);
 		if (!newcfi)
 			return -ENOMEM;
 		shared = kmalloc_array(cfi->numchips,
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index 837b04ab96a9..839ed40625d6 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -135,7 +135,7 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi
 	 * our caller, and copy the appropriate data into them.
 	 */
 
-	retcfi = kmalloc(sizeof(struct cfi_private) + cfi.numchips * sizeof(struct flchip), GFP_KERNEL);
+	retcfi = kmalloc(struct_size(retcfi, chips, cfi.numchips), GFP_KERNEL);
 
 	if (!retcfi) {
 		kfree(cfi.cfiq);
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 4c94fc096696..7754803e3463 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -1767,8 +1767,8 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
 
 	switch (chip_id) {
 	case DOC_CHIPID_G3:
-		mtd->name = kasprintf(GFP_KERNEL, "docg3.%d",
-				      docg3->device_id);
+		mtd->name = devm_kasprintf(docg3->dev, GFP_KERNEL, "docg3.%d",
+					   docg3->device_id);
 		if (!mtd->name)
 			return -ENOMEM;
 		docg3->max_block = 2047;
@@ -1872,7 +1872,7 @@ nomem3:
 nomem2:
 	kfree(docg3);
 nomem1:
-	return ERR_PTR(ret);
+	return ret ? ERR_PTR(ret) : NULL;
 }
 
 /**
@@ -1886,7 +1886,6 @@ static void doc_release_device(struct mtd_info *mtd)
 	mtd_device_unregister(mtd);
 	kfree(docg3->bbt);
 	kfree(docg3);
-	kfree(mtd->name);
 	kfree(mtd);
 }
 
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index c4a1d04b8c80..651bab6d4e31 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -195,7 +195,14 @@ static int m25p_probe(struct spi_mem *spimem)
 	spi_mem_set_drvdata(spimem, flash);
 	flash->spimem = spimem;
 
-	if (spi->mode & SPI_RX_QUAD) {
+	if (spi->mode & SPI_RX_OCTAL) {
+		hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
+
+		if (spi->mode & SPI_TX_OCTAL)
+			hwcaps.mask |= (SNOR_HWCAPS_READ_1_8_8 |
+					SNOR_HWCAPS_PP_1_1_8 |
+					SNOR_HWCAPS_PP_1_8_8);
+	} else if (spi->mode & SPI_RX_QUAD) {
 		hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
 
 		if (spi->mode & SPI_TX_QUAD)
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index 46238796145f..1c97fabc4bf9 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -24,14 +24,12 @@ static unsigned long writebuf_size = 64;
 #define MTDRAM_TOTAL_SIZE (total_size * 1024)
 #define MTDRAM_ERASE_SIZE (erase_size * 1024)
 
-#ifdef MODULE
 module_param(total_size, ulong, 0);
 MODULE_PARM_DESC(total_size, "Total device size in KiB");
 module_param(erase_size, ulong, 0);
 MODULE_PARM_DESC(erase_size, "Device erase block size in KiB");
 module_param(writebuf_size, ulong, 0);
 MODULE_PARM_DESC(writebuf_size, "Device write buf size in Bytes (Default: 64)");
-#endif
 
 // We could store these in the mtd structure, but we only support 1 device..
 static struct mtd_info *mtd_info;
diff --git a/drivers/mtd/lpddr/qinfo_probe.c b/drivers/mtd/lpddr/qinfo_probe.c
index 69f2112340b1..175bdc3b72f4 100644
--- a/drivers/mtd/lpddr/qinfo_probe.c
+++ b/drivers/mtd/lpddr/qinfo_probe.c
@@ -181,8 +181,8 @@ static struct lpddr_private *lpddr_probe_chip(struct map_info *map)
 	lpddr.numchips = 1;
 
 	numvirtchips = lpddr.numchips * lpddr.qinfo->HWPartsNum;
-	retlpddr = kzalloc(sizeof(struct lpddr_private) +
-			numvirtchips * sizeof(struct flchip), GFP_KERNEL);
+	retlpddr = kzalloc(struct_size(retlpddr, chips, numvirtchips),
+			   GFP_KERNEL);
 	if (!retlpddr)
 		return NULL;
 
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 3ef01baef9b6..76b4264936ff 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -155,7 +155,6 @@ static ssize_t mtd_flags_show(struct device *dev,
 	struct mtd_info *mtd = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "0x%lx\n", (unsigned long)mtd->flags);
-
 }
 static DEVICE_ATTR(flags, S_IRUGO, mtd_flags_show, NULL);
 
@@ -166,7 +165,6 @@ static ssize_t mtd_size_show(struct device *dev,
 
 	return snprintf(buf, PAGE_SIZE, "%llu\n",
 		(unsigned long long)mtd->size);
-
 }
 static DEVICE_ATTR(size, S_IRUGO, mtd_size_show, NULL);
 
@@ -176,7 +174,6 @@ static ssize_t mtd_erasesize_show(struct device *dev,
 	struct mtd_info *mtd = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->erasesize);
-
 }
 static DEVICE_ATTR(erasesize, S_IRUGO, mtd_erasesize_show, NULL);
 
@@ -186,7 +183,6 @@ static ssize_t mtd_writesize_show(struct device *dev,
 	struct mtd_info *mtd = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->writesize);
-
 }
 static DEVICE_ATTR(writesize, S_IRUGO, mtd_writesize_show, NULL);
 
@@ -197,7 +193,6 @@ static ssize_t mtd_subpagesize_show(struct device *dev,
 	unsigned int subpagesize = mtd->writesize >> mtd->subpage_sft;
 
 	return snprintf(buf, PAGE_SIZE, "%u\n", subpagesize);
-
 }
 static DEVICE_ATTR(subpagesize, S_IRUGO, mtd_subpagesize_show, NULL);
 
@@ -207,7 +202,6 @@ static ssize_t mtd_oobsize_show(struct device *dev,
 	struct mtd_info *mtd = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->oobsize);
-
 }
 static DEVICE_ATTR(oobsize, S_IRUGO, mtd_oobsize_show, NULL);
 
@@ -226,7 +220,6 @@ static ssize_t mtd_numeraseregions_show(struct device *dev,
 	struct mtd_info *mtd = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "%u\n", mtd->numeraseregions);
-
 }
 static DEVICE_ATTR(numeraseregions, S_IRUGO, mtd_numeraseregions_show,
 	NULL);
@@ -237,7 +230,6 @@ static ssize_t mtd_name_show(struct device *dev,
 	struct mtd_info *mtd = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE, "%s\n", mtd->name);
-
 }
 static DEVICE_ATTR(name, S_IRUGO, mtd_name_show, NULL);
 
@@ -560,6 +552,14 @@ int add_mtd_device(struct mtd_info *mtd)
 
 	BUG_ON(mtd->writesize == 0);
 
+	/*
+	 * MTD drivers should implement ->_{write,read}() or
+	 * ->_{write,read}_oob(), but not both.
+	 */
+	if (WARN_ON((mtd->_write && mtd->_write_oob) ||
+		    (mtd->_read && mtd->_read_oob)))
+		return -EINVAL;
+
 	if (WARN_ON((!mtd->erasesize || !mtd->_erase) &&
 		    !(mtd->flags & MTD_NO_ERASE)))
 		return -EINVAL;
@@ -1090,67 +1090,32 @@ EXPORT_SYMBOL_GPL(mtd_get_unmapped_area);
 int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
 	     u_char *buf)
 {
-	int ret_code;
-	*retlen = 0;
-	if (from < 0 || from >= mtd->size || len > mtd->size - from)
-		return -EINVAL;
-	if (!len)
-		return 0;
+	struct mtd_oob_ops ops = {
+		.len = len,
+		.datbuf = buf,
+	};
+	int ret;
 
-	ledtrig_mtd_activity();
-	/*
-	 * In the absence of an error, drivers return a non-negative integer
-	 * representing the maximum number of bitflips that were corrected on
-	 * any one ecc region (if applicable; zero otherwise).
-	 */
-	if (mtd->_read) {
-		ret_code = mtd->_read(mtd, from, len, retlen, buf);
-	} else if (mtd->_read_oob) {
-		struct mtd_oob_ops ops = {
-			.len = len,
-			.datbuf = buf,
-		};
-
-		ret_code = mtd->_read_oob(mtd, from, &ops);
-		*retlen = ops.retlen;
-	} else {
-		return -ENOTSUPP;
-	}
+	ret = mtd_read_oob(mtd, from, &ops);
+	*retlen = ops.retlen;
 
-	if (unlikely(ret_code < 0))
-		return ret_code;
-	if (mtd->ecc_strength == 0)
-		return 0;	/* device lacks ecc */
-	return ret_code >= mtd->bitflip_threshold ? -EUCLEAN : 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(mtd_read);
 
 int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
 	      const u_char *buf)
 {
-	*retlen = 0;
-	if (to < 0 || to >= mtd->size || len > mtd->size - to)
-		return -EINVAL;
-	if ((!mtd->_write && !mtd->_write_oob) ||
-	    !(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	if (!len)
-		return 0;
-	ledtrig_mtd_activity();
+	struct mtd_oob_ops ops = {
+		.len = len,
+		.datbuf = (u8 *)buf,
+	};
+	int ret;
 
-	if (!mtd->_write) {
-		struct mtd_oob_ops ops = {
-			.len = len,
-			.datbuf = (u8 *)buf,
-		};
-		int ret;
+	ret = mtd_write_oob(mtd, to, &ops);
+	*retlen = ops.retlen;
 
-		ret = mtd->_write_oob(mtd, to, &ops);
-		*retlen = ops.retlen;
-		return ret;
-	}
-
-	return mtd->_write(mtd, to, len, retlen, buf);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(mtd_write);
 
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 1a55d3e3d4c5..e604625e2dfa 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -541,4 +541,21 @@ config MTD_NAND_TEGRA
 	  is supported. Extra OOB bytes when using HW ECC are currently
 	  not supported.
 
+config MTD_NAND_STM32_FMC2
+	tristate "Support for NAND controller on STM32MP SoCs"
+	depends on MACH_STM32MP157 || COMPILE_TEST
+	help
+	  Enables support for NAND Flash chips on SoCs containing the FMC2
+	  NAND controller. This controller is found on STM32MP SoCs.
+	  The controller supports a maximum 8k page size and supports
+	  a maximum 8-bit correction error per sector of 512 bytes.
+
+config MTD_NAND_MESON
+	tristate "Support for NAND controller on Amlogic's Meson SoCs"
+	depends on ARCH_MESON || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  Enables support for NAND controller on Amlogic's Meson SoCs.
+	  This controller is found on Meson SoCs.
+
 endif # MTD_NAND
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 57159b349054..5a5a72f0793e 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -56,6 +56,8 @@ obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand/
 obj-$(CONFIG_MTD_NAND_QCOM)		+= qcom_nandc.o
 obj-$(CONFIG_MTD_NAND_MTK)		+= mtk_ecc.o mtk_nand.o
 obj-$(CONFIG_MTD_NAND_TEGRA)		+= tegra_nand.o
+obj-$(CONFIG_MTD_NAND_STM32_FMC2)	+= stm32_fmc2_nand.o
+obj-$(CONFIG_MTD_NAND_MESON)		+= meson_nand.o
 
 nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
 nand-objs += nand_onfi.o
diff --git a/drivers/mtd/nand/raw/atmel/pmecc.c b/drivers/mtd/nand/raw/atmel/pmecc.c
index 555a74e15269..9d3997840889 100644
--- a/drivers/mtd/nand/raw/atmel/pmecc.c
+++ b/drivers/mtd/nand/raw/atmel/pmecc.c
@@ -876,23 +876,32 @@ static struct atmel_pmecc *atmel_pmecc_get_by_node(struct device *userdev,
 {
 	struct platform_device *pdev;
 	struct atmel_pmecc *pmecc, **ptr;
+	int ret;
 
 	pdev = of_find_device_by_node(np);
-	if (!pdev || !platform_get_drvdata(pdev))
+	if (!pdev)
 		return ERR_PTR(-EPROBE_DEFER);
+	pmecc = platform_get_drvdata(pdev);
+	if (!pmecc) {
+		ret = -EPROBE_DEFER;
+		goto err_put_device;
+	}
 
 	ptr = devres_alloc(devm_atmel_pmecc_put, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr)
-		return ERR_PTR(-ENOMEM);
-
-	get_device(&pdev->dev);
-	pmecc = platform_get_drvdata(pdev);
+	if (!ptr) {
+		ret = -ENOMEM;
+		goto err_put_device;
+	}
 
 	*ptr = pmecc;
 
 	devres_add(userdev, ptr);
 
 	return pmecc;
+
+err_put_device:
+	put_device(&pdev->dev);
+	return ERR_PTR(ret);
 }
 
 static const int atmel_pmecc_strengths[] = { 2, 4, 8, 12, 24, 32 };
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 6e8edc9375dd..24aeafc67cd4 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -37,9 +37,6 @@
 #define DENALI_MAP11_ADDR	((DENALI_MAP11) | 1)	/* address cycle */
 #define DENALI_MAP11_DATA	((DENALI_MAP11) | 2)	/* data cycle */
 
-/* MAP10 commands */
-#define DENALI_ERASE		0x01
-
 #define DENALI_BANK(denali)	((denali)->active_bank << 24)
 
 #define DENALI_INVALID_BANK	-1
@@ -476,7 +473,7 @@ static void denali_setup_dma32(struct denali_nand_info *denali,
 }
 
 static int denali_pio_read(struct denali_nand_info *denali, void *buf,
-			   size_t size, int page, int raw)
+			   size_t size, int page)
 {
 	u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
 	uint32_t *buf32 = (uint32_t *)buf;
@@ -504,7 +501,7 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf,
 }
 
 static int denali_pio_write(struct denali_nand_info *denali,
-			    const void *buf, size_t size, int page, int raw)
+			    const void *buf, size_t size, int page)
 {
 	u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
 	const uint32_t *buf32 = (uint32_t *)buf;
@@ -525,16 +522,16 @@ static int denali_pio_write(struct denali_nand_info *denali,
 }
 
 static int denali_pio_xfer(struct denali_nand_info *denali, void *buf,
-			   size_t size, int page, int raw, int write)
+			   size_t size, int page, int write)
 {
 	if (write)
-		return denali_pio_write(denali, buf, size, page, raw);
+		return denali_pio_write(denali, buf, size, page);
 	else
-		return denali_pio_read(denali, buf, size, page, raw);
+		return denali_pio_read(denali, buf, size, page);
 }
 
 static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
-			   size_t size, int page, int raw, int write)
+			   size_t size, int page, int write)
 {
 	dma_addr_t dma_addr;
 	uint32_t irq_mask, irq_status, ecc_err_mask;
@@ -544,7 +541,7 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
 	dma_addr = dma_map_single(denali->dev, buf, size, dir);
 	if (dma_mapping_error(denali->dev, dma_addr)) {
 		dev_dbg(denali->dev, "Failed to DMA-map buffer. Trying PIO.\n");
-		return denali_pio_xfer(denali, buf, size, page, raw, write);
+		return denali_pio_xfer(denali, buf, size, page, write);
 	}
 
 	if (write) {
@@ -598,9 +595,9 @@ static int denali_data_xfer(struct denali_nand_info *denali, void *buf,
 		  denali->reg + TRANSFER_SPARE_REG);
 
 	if (denali->dma_avail)
-		return denali_dma_xfer(denali, buf, size, page, raw, write);
+		return denali_dma_xfer(denali, buf, size, page, write);
 	else
-		return denali_pio_xfer(denali, buf, size, page, raw, write);
+		return denali_pio_xfer(denali, buf, size, page, write);
 }
 
 static void denali_oob_xfer(struct mtd_info *mtd, struct nand_chip *chip,
@@ -754,9 +751,6 @@ static int denali_read_oob(struct nand_chip *chip, int page)
 static int denali_write_oob(struct nand_chip *chip, int page)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
-
-	denali_reset_irq(denali);
 
 	denali_oob_xfer(mtd, chip, page, 1);
 
@@ -903,23 +897,6 @@ static int denali_waitfunc(struct nand_chip *chip)
 	return irq_status & INTR__INT_ACT ? 0 : NAND_STATUS_FAIL;
 }
 
-static int denali_erase(struct nand_chip *chip, int page)
-{
-	struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
-	uint32_t irq_status;
-
-	denali_reset_irq(denali);
-
-	denali->host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page,
-			   DENALI_ERASE);
-
-	/* wait for erase to complete or failure to occur */
-	irq_status = denali_wait_for_irq(denali,
-					 INTR__ERASE_COMP | INTR__ERASE_FAIL);
-
-	return irq_status & INTR__ERASE_COMP ? 0 : -EIO;
-}
-
 static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
 				       const struct nand_data_interface *conf)
 {
@@ -1244,7 +1221,6 @@ static int denali_attach_chip(struct nand_chip *chip)
 	chip->ecc.write_page_raw = denali_write_page_raw;
 	chip-&g