Merge tag 'usb-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.12 merge window

All patches here have been pending on linux-usb
and sitting in linux-next for a while now.

The biggest things in this tag are:

DWC3 learned proper usage of threaded IRQ
handlers and now we spend very little time
in hardirq context.

MUSB now has proper support for BeagleBone and
Beaglebone Black.

Tegra's USB support also got quite a bit of love
and is learning to use PHY layer and generic DT
attributes.

Other than that, the usual pack of cleanups and
non-critical fixes follow.

Signed-of-by: Felipe Balbi <balbi@ti.com>

Conflicts:
	drivers/usb/gadget/udc-core.c
	drivers/usb/host/ehci-tegra.c
	drivers/usb/musb/omap2430.c
	drivers/usb/musb/tusb6010.c

96 files changed, 2189 insertions, 3363 deletions

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 5460abf045de..70d7c5b92c3c 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -46,7 +46,7 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB)		+= misc/
-obj-$(CONFIG_USB_PHY)		+= phy/
+obj-$(CONFIG_USB_SUPPORT)	+= phy/
 obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 40d0fda4f66c..9b3aaf132bc3 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -63,6 +63,7 @@ static int host_start(struct ci_hdrc *ci)
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = ci->hw_bank.cap;
 	ehci->has_hostpc = ci->hw_bank.lpm;
+	ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
 
 	ret = usb_add_hcd(hcd, 0, 0);
 	if (ret)
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 2378958ea63e..3e225d5846f6 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -40,6 +40,38 @@ config USB_DWC3_DUAL_ROLE
 
 endchoice
 
+comment "Platform Glue Driver Support"
+
+config USB_DWC3_OMAP
+	tristate "Texas Instruments OMAP5 and similar Platforms"
+	depends on EXTCON
+	default USB_DWC3
+	help
+	  Some platforms from Texas Instruments like OMAP5, DRA7xxx and
+	  AM437x use this IP for USB2/3 functionality.
+
+	  Say 'Y' or 'M' here if you have one such device
+
+config USB_DWC3_EXYNOS
+	tristate "Samsung Exynos Platform"
+	default USB_DWC3
+	help
+	  Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
+	  say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_PCI
+	tristate "PCIe-based Platforms"
+	depends on PCI
+	default USB_DWC3
+	help
+	  If you're using the DesignWare Core IP with a PCIe, please say
+	  'Y' or 'M' here.
+
+	  One such PCIe-based platform is Synopsys' PCIe HAPS model of
+	  this IP.
+
+comment "Debugging features"
+
 config USB_DWC3_DEBUG
 	bool "Enable Debugging Messages"
 	help
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index 0c7ac92582be..dd1760145c46 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -27,15 +27,8 @@ endif
 # the entire driver (with all its glue layers) on several architectures
 # and make sure it compiles fine. This will also help with allmodconfig
 # and allyesconfig builds.
-#
-# The only exception is the PCI glue layer, but that's only because
-# PCI doesn't provide nops if CONFIG_PCI isn't enabled.
 ##
 
-obj-$(CONFIG_USB_DWC3)		+= dwc3-omap.o
-obj-$(CONFIG_USB_DWC3)		+= dwc3-exynos.o
-
-ifneq ($(CONFIG_PCI),)
-	obj-$(CONFIG_USB_DWC3)		+= dwc3-pci.o
-endif
-
+obj-$(CONFIG_USB_DWC3_OMAP)		+= dwc3-omap.o
+obj-$(CONFIG_USB_DWC3_EXYNOS)		+= dwc3-exynos.o
+obj-$(CONFIG_USB_DWC3_PCI)		+= dwc3-pci.o
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 358375e0b291..3ff6f0ad01df 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -6,34 +6,17 @@
  * Authors: Felipe Balbi <balbi@ti.com>,
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- *    to endorse or promote products derived from this software without
- *    specific prior written permission.
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
  *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2, as published by the Free
- * Software Foundation.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
  *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/module.h>
@@ -53,17 +36,16 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
 
+#include "platform_data.h"
 #include "core.h"
 #include "gadget.h"
 #include "io.h"
 
 #include "debug.h"
 
-static char *maximum_speed = "super";
-module_param(maximum_speed, charp, 0);
-MODULE_PARM_DESC(maximum_speed, "Maximum supported speed.");
-
 /* -------------------------------------------------------------------------- */
 
 void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
@@ -236,7 +218,7 @@ static int dwc3_event_buffers_setup(struct dwc3 *dwc)
 		dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n),
 				upper_32_bits(evt->dma));
 		dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n),
-				evt->length & 0xffff);
+				DWC3_GEVNTSIZ_SIZE(evt->length));
 		dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
 	}
 
@@ -255,7 +237,8 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
 
 		dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0);
 		dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0);
-		dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), 0);
+		dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), DWC3_GEVNTSIZ_INTMASK
+				| DWC3_GEVNTSIZ_SIZE(0));
 		dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
 	}
 }
@@ -367,18 +350,17 @@ static void dwc3_core_exit(struct dwc3 *dwc)
 
 static int dwc3_probe(struct platform_device *pdev)
 {
-	struct device_node	*node = pdev->dev.of_node;
+	struct device		*dev = &pdev->dev;
+	struct dwc3_platform_data *pdata = dev_get_platdata(dev);
+	struct device_node	*node = dev->of_node;
 	struct resource		*res;
 	struct dwc3		*dwc;
-	struct device		*dev = &pdev->dev;
 
 	int			ret = -ENOMEM;
 
 	void __iomem		*regs;
 	void			*mem;
 
-	u8			mode;
-
 	mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
 	if (!mem) {
 		dev_err(dev, "not enough memory\n");
@@ -402,38 +384,29 @@ static int dwc3_probe(struct platform_device *pdev)
 		dev_err(dev, "missing memory resource\n");
 		return -ENODEV;
 	}
-	dwc->xhci_resources[0].start = res->start;
-	dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
-					DWC3_XHCI_REGS_END;
-	dwc->xhci_resources[0].flags = res->flags;
-	dwc->xhci_resources[0].name = res->name;
-
-	 /*
-	  * Request memory region but exclude xHCI regs,
-	  * since it will be requested by the xhci-plat driver.
-	  */
-	res = devm_request_mem_region(dev, res->start + DWC3_GLOBALS_REGS_START,
-			resource_size(res) - DWC3_GLOBALS_REGS_START,
-			dev_name(dev));
-	if (!res) {
-		dev_err(dev, "can't request mem region\n");
-		return -ENOMEM;
-	}
-
-	regs = devm_ioremap_nocache(dev, res->start, resource_size(res));
-	if (!regs) {
-		dev_err(dev, "ioremap failed\n");
-		return -ENOMEM;
-	}
 
 	if (node) {
+		dwc->maximum_speed = of_usb_get_maximum_speed(node);
+
 		dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
 		dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
+
+		dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
+		dwc->dr_mode = of_usb_get_dr_mode(node);
 	} else {
+		dwc->maximum_speed = pdata->maximum_speed;
+
 		dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
 		dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
+
+		dwc->needs_fifo_resize = pdata->tx_fifo_resize;
+		dwc->dr_mode = pdata->dr_mode;
 	}
 
+	/* default to superspeed if no maximum_speed passed */
+	if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
+		dwc->maximum_speed = USB_SPEED_SUPER;
+
 	if (IS_ERR(dwc->usb2_phy)) {
 		ret = PTR_ERR(dwc->usb2_phy);
 
@@ -464,6 +437,22 @@ static int dwc3_probe(struct platform_device *pdev)
 		return -EPROBE_DEFER;
 	}
 
+	dwc->xhci_resources[0].start = res->start;
+	dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
+					DWC3_XHCI_REGS_END;
+	dwc->xhci_resources[0].flags = res->flags;
+	dwc->xhci_resources[0].name = res->name;
+
+	res->start += DWC3_GLOBALS_REGS_START;
+
+	/*
+	 * Request memory region but exclude xHCI regs,
+	 * since it will be requested by the xhci-plat driver.
+	 */
+	regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
 	usb_phy_set_suspend(dwc->usb2_phy, 0);
 	usb_phy_set_suspend(dwc->usb3_phy, 0);
 
@@ -478,19 +467,6 @@ static int dwc3_probe(struct platform_device *pdev)
 	dev->dma_parms	= dev->parent->dma_parms;
 	dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask);
 
-	if (!strncmp("super", maximum_speed, 5))
-		dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
-	else if (!strncmp("high", maximum_speed, 4))
-		dwc->maximum_speed = DWC3_DCFG_HIGHSPEED;
-	else if (!strncmp("full", maximum_speed, 4))
-		dwc->maximum_speed = DWC3_DCFG_FULLSPEED1;
-	else if (!strncmp("low", maximum_speed, 3))
-		dwc->maximum_speed = DWC3_DCFG_LOWSPEED;
-	else
-		dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
-
-	dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
-
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 	pm_runtime_forbid(dev);
@@ -517,14 +493,15 @@ static int dwc3_probe(struct platform_device *pdev)
 	}
 
 	if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
-		mode = DWC3_MODE_HOST;
+		dwc->dr_mode = USB_DR_MODE_HOST;
 	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
-		mode = DWC3_MODE_DEVICE;
-	else
-		mode = DWC3_MODE_DRD;
+		dwc->dr_mode = USB_DR_MODE_PERIPHERAL;
+
+	if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
+		dwc->dr_mode = USB_DR_MO