Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh-latest

34 files changed, 2713 insertions, 1157 deletions

diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index be0ebce36e54..d5bfd41707e7 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -262,7 +262,7 @@ static void status_handle(struct m68k_serial *info, unsigned short status)
 
 static void receive_chars(struct m68k_serial *info, unsigned short rx)
 {
-	struct tty_struct *tty = info->port.tty;
+	struct tty_struct *tty = info->tty;
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned char ch, flag;
 
@@ -329,7 +329,7 @@ static void transmit_chars(struct m68k_serial *info)
 		goto clear_and_return;
 	}
 
-	if((info->xmit_cnt <= 0) || info->port.tty->stopped) {
+	if((info->xmit_cnt <= 0) || info->tty->stopped) {
 		/* That's peculiar... TX ints off */
 		uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
 		goto clear_and_return;
@@ -383,7 +383,7 @@ static void do_softint(struct work_struct *work)
 	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue);
 	struct tty_struct	*tty;
 	
-	tty = info->port.tty;
+	tty = info->tty;
 	if (!tty)
 		return;
 #if 0
@@ -393,28 +393,6 @@ static void do_softint(struct work_struct *work)
 #endif   
 }
 
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred.  The path of
- * hangup processing is:
- *
- * 	serial interrupt routine -> (scheduler tqueue) ->
- * 	do_serial_hangup() -> tty->hangup() -> rs_hangup()
- * 
- */
-static void do_serial_hangup(struct work_struct *work)
-{
-	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue_hangup);
-	struct tty_struct	*tty;
-	
-	tty = info->port.tty;
-	if (!tty)
-		return;
-
-	tty_hangup(tty);
-}
-
-
 static int startup(struct m68k_serial * info)
 {
 	m68328_uart *uart = &uart_addr[info->line];
@@ -451,8 +429,8 @@ static int startup(struct m68k_serial * info)
 	uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
 #endif
 
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+	if (info->tty)
+		clear_bit(TTY_IO_ERROR, &info->tty->flags);
 	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 
 	/*
@@ -486,8 +464,8 @@ static void shutdown(struct m68k_serial * info)
 		info->xmit_buf = 0;
 	}
 
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+	if (info->tty)
+		set_bit(TTY_IO_ERROR, &info->tty->flags);
 	
 	info->flags &= ~S_INITIALIZED;
 	local_irq_restore(flags);
@@ -553,9 +531,9 @@ static void change_speed(struct m68k_serial *info)
 	unsigned cflag;
 	int	i;
 
-	if (!info->port.tty || !info->port.tty->termios)
+	if (!info->tty || !info->tty->termios)
 		return;
-	cflag = info->port.tty->termios->c_cflag;
+	cflag = info->tty->termios->c_cflag;
 	if (!(port = info->port))
 		return;
 
@@ -967,10 +945,9 @@ static void send_break(struct m68k_serial * info, unsigned int duration)
         local_irq_restore(flags);
 }
 
-static int rs_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
-	int error;
 	struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
 	int retval;
 
@@ -1104,7 +1081,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	tty_ldisc_flush(tty);
 	tty->closing = 0;
 	info->event = 0;
-	info->port.tty = NULL;
+	info->tty = NULL;
 #warning "This is not and has never been valid so fix it"	
 #if 0
 	if (tty->ldisc.num != ldiscs[N_TTY].num) {
@@ -1142,7 +1119,7 @@ void rs_hangup(struct tty_struct *tty)
 	info->event = 0;
 	info->count = 0;
 	info->flags &= ~S_NORMAL_ACTIVE;
-	info->port.tty = NULL;
+	info->tty = NULL;
 	wake_up_interruptible(&info->open_wait);
 }
 
@@ -1261,7 +1238,7 @@ int rs_open(struct tty_struct *tty, struct file * filp)
 
 	info->count++;
 	tty->driver_data = info;
-	info->port.tty = tty;
+	info->tty = tty;
 
 	/*
 	 * Start up serial port
@@ -1338,7 +1315,7 @@ rs68328_init(void)
 	    info = &m68k_soft[i];
 	    info->magic = SERIAL_MAGIC;
 	    info->port = (int) &uart_addr[i];
-	    info->port.tty = NULL;
+	    info->tty = NULL;
 	    info->irq = uart_irqs[i];
 	    info->custom_divisor = 16;
 	    info->close_delay = 50;
@@ -1348,7 +1325,6 @@ rs68328_init(void)
 	    info->count = 0;
 	    info->blocked_open = 0;
 	    INIT_WORK(&info->tqueue, do_softint);
-	    INIT_WORK(&info->tqueue_hangup, do_serial_hangup);
 	    init_waitqueue_head(&info->open_wait);
 	    init_waitqueue_head(&info->close_wait);
 	    info->line = i;
diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h
index 664ceb0a158c..8c9c3c0745db 100644
--- a/drivers/tty/serial/68328serial.h
+++ b/drivers/tty/serial/68328serial.h
@@ -159,7 +159,6 @@ struct m68k_serial {
 	int			xmit_tail;
 	int			xmit_cnt;
 	struct work_struct	tqueue;
-	struct work_struct	tqueue_hangup;
 	wait_queue_head_t	open_wait;
 	wait_queue_head_t	close_wait;
 };
diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c
index bc21eeae8fde..0a3e8787ed50 100644
--- a/drivers/tty/serial/68360serial.c
+++ b/drivers/tty/serial/68360serial.c
@@ -1240,7 +1240,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int *value)
 }
 #endif
 
-static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
+static int rs_360_tiocmget(struct tty_struct *tty)
 {
 	ser_info_t *info = (ser_info_t *)tty->driver_data;
 	unsigned int result = 0;
@@ -1271,7 +1271,7 @@ static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int rs_360_tiocmset(struct tty_struct *tty, struct file *file,
+static int rs_360_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 #ifdef modem_control
@@ -1405,7 +1405,7 @@ static int rs_360_get_icount(struct tty_struct *tty,
 	return 0;
 }
 
-static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_360_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	int error;
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index 3975df6f7fdb..b3b881bc4712 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -954,6 +954,23 @@ static int broken_efr(struct uart_8250_port *up)
 	return 0;
 }
 
+static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
+{
+	unsigned char status;
+
+	status = serial_in(up, 0x04); /* EXCR2 */
+#define PRESL(x) ((x) & 0x30)
+	if (PRESL(status) == 0x10) {
+		/* already in high speed mode */
+		return 0;
+	} else {
+		status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
+		status |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
+		serial_outp(up, 0x04, status);
+	}
+	return 1;
+}
+
 /*
  * We know that the chip has FIFOs.  Does it have an EFR?  The
  * EFR is located in the same register position as the IIR and
@@ -1025,12 +1042,8 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 			quot = serial_dl_read(up);
 			quot <<= 3;
 
-			status1 = serial_in(up, 0x04); /* EXCR2 */
-			status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
-			status1 |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
-			serial_outp(up, 0x04, status1);
-
-			serial_dl_write(up, quot);
+			if (ns16550a_goto_highspeed(up))
+				serial_dl_write(up, quot);
 
 			serial_outp(up, UART_LCR, 0);
 
@@ -3025,17 +3038,13 @@ void serial8250_resume_port(int line)
 	struct uart_8250_port *up = &serial8250_ports[line];
 
 	if (up->capabilities & UART_NATSEMI) {
-		unsigned char tmp;
-
 		/* Ensure it's still in high speed mode */
 		serial_outp(up, UART_LCR, 0xE0);
 
-		tmp = serial_in(up, 0x04); /* EXCR2 */
-		tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
-		tmp |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
-		serial_outp(up, 0x04, tmp);
+		ns16550a_goto_highspeed(up);
 
 		serial_outp(up, UART_LCR, 0);
+		up->port.uartclk = 921600*16;
 	}
 	uart_resume_port(&serial8250_reg, &up->port);
 }
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2b8334601c8b..e461be164f67 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1110,29 +1110,6 @@ config SERIAL_PMACZILOG_CONSOLE
 	  on your (Power)Mac as the console, you can do so by answering
 	  Y to this option.
 
-config SERIAL_LH7A40X
-	tristate "Sharp LH7A40X embedded UART support"
-	depends on ARM && ARCH_LH7A40X
-	select SERIAL_CORE
-	help
-	  This enables support for the three on-board UARTs of the
-	  Sharp LH7A40X series CPUs.  Choose Y or M.
-
-config SERIAL_LH7A40X_CONSOLE
-	bool "Support for console on Sharp LH7A40X serial port"
-	depends on SERIAL_LH7A40X=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Say Y here if you wish to use one of the serial ports as the
-	  system console--the system console is the device which
-	  receives all kernel messages and warnings and which allows
-	  logins in single user mode.
-
-	  Even if you say Y here, the currently visible framebuffer console
-	  (/dev/tty0) will still be used as the default system console, but
-	  you can alter that using a kernel command line, for example
-	  "console=ttyAM1".
-
 config SERIAL_CPM
 	tristate "CPM SCC/SMC serial port support"
 	depends on CPM2 || 8xx
@@ -1319,6 +1296,18 @@ config SERIAL_MSM_CONSOLE
 	depends on SERIAL_MSM=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_MSM_HS
+	tristate "MSM UART High Speed: Serial Driver"
+	depends on ARCH_MSM
+	select SERIAL_CORE
+	help
+	  If you have a machine based on MSM family of SoCs, you
+	  can enable its onboard high speed serial port by enabling
+	  this option.
+
+	  Choose M here to compile it as a module. The module will be
+	  called msm_serial_hs.
+
 config SERIAL_VT8500
 	bool "VIA VT8500 on-chip serial port support"
 	depends on ARM && ARCH_VT8500
@@ -1588,12 +1577,25 @@ config SERIAL_IFX6X60
 	  Support for the IFX6x60 modem devices on Intel MID platforms.
 
 config SERIAL_PCH_UART
-	tristate "Intel EG20T PCH UART"
-	depends on PCI && DMADEVICES
+	tristate "Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
+	depends on PCI
 	select SERIAL_CORE
-	select PCH_DMA
 	help
 	  This driver is for PCH(Platform controller Hub) UART of Intel EG20T
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
 	  Enabling PCH_DMA, this PCH UART works as DMA mode.
+
+	  This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/
+	  Output Hub) which is for IVI(In-Vehicle Infotainment) use.
+	  ML7213 is companion chip for Intel Atom E6xx series.
+	  ML7213 is completely compatible for Intel EG20T PCH.
+
+config SERIAL_MSM_SMD
+	bool "Enable tty device interface for some SMD ports"
+	default n
+	depends on MSM_SMD
+	help
+	  Enables userspace clients to read and write to some streaming SMD
+	  ports via tty device interface for MSM chipset.
+
 endmenu
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 8ea92e9c73b0..31e868cb49b2 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
 obj-$(CONFIG_SERIAL_MCF) += mcf.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
-obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
 obj-$(CONFIG_SERIAL_ZS) += zs.o
 obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
@@ -76,6 +75,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
 obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
+obj-$(CONFIG_SERIAL_MSM_HS) += msm_serial_hs.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
@@ -92,3 +92,4 @@ obj-$(CONFIG_SERIAL_MRST_MAX3110)	+= mrst_max3110.o
 obj-$(CONFIG_SERIAL_MFD_HSU)	+= mfd.o
 obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
 obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
+obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index f9b49b5ff5e1..60e049b041a7 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -305,28 +305,6 @@ static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS];
 
 #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE)
 
-int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart
-				       *platp)
-{
-	struct uart_port *port;
-	int i;
-
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
-		port = &altera_jtaguart_ports[i].port;
-
-		port->line = i;
-		port->type = PORT_ALTERA_JTAGUART;
-		port->mapbase = platp[i].mapbase;
-		port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
-		port->iotype = SERIAL_IO_MEM;
-		port->irq = platp[i].irq;
-		port->flags = ASYNC_BOOT_AUTOCONF;
-		port->ops = &altera_jtaguart_ops;
-	}
-
-	return 0;
-}
-
 #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS)
 static void altera_jtaguart_console_putc(struct console *co, const char c)
 {
@@ -384,7 +362,7 @@ static int __init altera_jtaguart_console_setup(struct console *co,
 	if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS)
 		return -EINVAL;
 	port = &altera_jtaguart_ports[co->index].port;
-	if (port->membase == 0)
+	if (port->membase == NULL)
 		return -ENODEV;
 	return 0;
 }
@@ -431,22 +409,45 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
 {
 	struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data;
 	struct uart_port *port;
-	int i;
+	struct resource *res_irq, *res_mem;
+	int i = pdev->id;
 
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
-		port = &altera_jtaguart_ports[i].port;
+	/* -1 emphasizes that the platform must have one port, no .N suffix */
+	if (i == -1)
+		i = 0;
 
-		port->line = i;
-		port->type = PORT_ALTERA_JTAGUART;
-		port->mapbase = platp[i].mapbase;
-		port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
-		port->iotype = SERIAL_IO_MEM;
-		port->irq = platp[i].irq;
-		port->ops = &altera_jtaguart_ops;
-		port->flags = ASYNC_BOOT_AUTOCONF;
+	if (i >= ALTERA_JTAGUART_MAXPORTS)
+		return -EINVAL;
 
-		uart_add_one_port(&altera_jtaguart_driver, port);
-	}
+	port = &altera_jtaguart_ports[i].port;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res_mem)
+		port->mapbase = res_mem->start;
+	else if (platp)
+		port->mapbase = platp->mapbase;
+	else
+		return -ENODEV;
+
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res_irq)
+		port->irq = res_irq->start;
+	else if (platp)
+		port->irq = platp->irq;
+	else
+		return -ENODEV;
+
+	port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
+	if (!port->membase)
+		return -ENOMEM;
+
+	port->line = i;
+	port->type = PORT_ALTERA_JTAGUART;
+	port->iotype = SERIAL_IO_MEM;
+	port->ops = &altera_jtaguart_ops;
+	port->flags = UPF_BOOT_AUTOCONF;
+
+	uart_add_one_port(&altera_jtaguart_driver, port);
 
 	return 0;
 }
@@ -454,23 +455,34 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
 static int __devexit altera_jtaguart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
-	int i;
+	int i = pdev->id;
 
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) {
-		port = &altera_jtaguart_ports[i].port;
-		if (port)
-			uart_remove_one_port(&altera_jtaguart_driver, port);
-	}
+	if (i == -1)
+		i = 0;
+
+	port = &altera_jtaguart_ports[i].port;
+	uart_remove_one_port(&altera_jtaguart_driver, port);
 
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id altera_jtaguart_match[] = {
+	{ .compatible = "ALTR,juart-1.0", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altera_jtaguart_match);
+#else
+#define altera_jtaguart_match NULL
+#endif /* CONFIG_OF */
+
 static struct platform_driver altera_jtaguart_platform_driver = {
 	.probe	= altera_jtaguart_probe,
 	.remove	= __devexit_p(altera_jtaguart_remove),
 	.driver	= {
-		.name	= DRV_NAME,
-		.owner	= THIS_MODULE,
+		.name		= DRV_NAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= altera_jtaguart_match,
 	},
 };
 
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 721216292a50..6d5b036ac783 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -24,6 +24,7 @@
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 #include <linux/io.h>
 #include <linux/altera_uart.h>
 
@@ -86,16 +87,12 @@ struct altera_uart {
 
 static u32 altera_uart_readl(struct uart_port *port, int reg)
 {
-	struct altera_uart_platform_uart *platp = port->private_data;
-
-	return readl(port->membase + (reg << platp->bus_shift));
+	return readl(port->membase + (reg << port->regshift));
 }
 
 static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
 {
-	struct altera_uart_platform_uart *platp = port->private_data;
-
-	writel(dat, port->membase + (reg << platp->bus_shift));
+	writel(dat, port->membase + (reg << port->regshift));
 }
 
 static unsigned int altera_uart_tx_empty(struct uart_port *port)
@@ -511,6 +508,29 @@ static struct uart_driver altera_uart_driver = {
 	.cons		= ALTERA_UART_CONSOLE,
 };
 
+#ifdef CONFIG_OF
+static int altera_uart_get_of_uartclk(struct platform_device *pdev,
+				      struct uart_port *port)
+{
+	int len;
+	const __be32 *clk;
+
+	clk = of_get_property(pdev->dev.of_node, "clock-frequency", &len);
+	if (!clk || len < sizeof(__be32))
+		return -ENODEV;
+
+	port->uartclk = be32_to_cpup(clk);
+
+	return 0;
+}
+#else
+static int altera_uart_get_of_uartclk(struct platform_device *pdev,
+				      struct uart_port *port)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_OF */
+
 static int __devinit altera_uart_probe(struct platform_device *pdev)
 {
 	struct altera_uart_platform_uart *platp = pdev->dev.platform_data;
@@ -518,6 +538,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	struct resource *res_mem;
 	struct resource *res_irq;
 	int i = pdev->id;
+	int ret;
 
 	/* -1 emphasizes that the platform must have one port, no .N suffix */
 	if (i == -1)
@@ -542,17 +563,29 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	else if (platp->irq)
 		port->irq = platp->irq;
 
+	/* Check platform data first so we can override device node data */
+	if (platp)
+		port->uartclk = platp->uartclk;
+	else {
+		ret = altera_uart_get_of_uartclk(pdev, port);
+		if (ret)
+			return ret;
+	}
+
 	port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
 	if (!port->membase)
 		return -ENOMEM;
 
+	if (platp)
+		port->regshift = platp->bus_shift;
+	else
+		port->regshift = 0;
+
 	port->line = i;
 	port->type = PORT_ALTERA_UART;
 	port->iotype = SERIAL_IO_MEM;
-	port->uartclk = platp->uartclk;
 	port->ops = &altera_uart_ops;
 	port->flags = UPF_BOOT_AUTOCONF;
-	port->private_data = platp;
 
 	uart_add_one_port(&altera_uart_driver, port);
 
@@ -561,19 +594,35 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 
 static int __devexit altera_uart_remove(struct platform_device *pdev)
 {
-	struct uart_port *port = &altera_uart_ports[pdev->id].port;
+	struct uart_port *port;
+	int i = pdev->id;
+
+	if (i == -1)
+		i = 0;
 
+	port = &altera_uart_ports[i].port;
 	uart_remove_one_port(&altera_uart_driver, port);
+
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id altera_uart_match[] = {
+	{ .compatible = "ALTR,uart-1.0", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altera_uart_match);
+#else
+#define altera_uart_match NULL
+#endif /* CONFIG_OF */
+
 static struct platform_driver altera_uart_platform_driver = {
 	.probe	= altera_uart_probe,
 	.remove	= __devexit_p(altera_uart_remove),
 	.driver	= {
-		.name	= DRV_NAME,
-		.owner	= THIS_MODULE,
-		.pm	= NULL,
+		.name		= DRV_NAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= altera_uart_match,
 	},
 };
 
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 095a5d562618..1ab999b04ef3 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -553,8 +553,7 @@ static struct uart_driver grlib_apbuart_driver = {
 /* OF Platform Driver                                                       */
 /* ======================================================================== */
 
-static int __devinit apbuart_probe(struct platform_device *op,
-				   const struct of_device_id *match)
+static int __devinit apbuart_probe(struct platform_device *op)
 {
 	int i = -1;
 	struct uart_port *port = NULL;
@@ -587,7 +586,7 @@ static struct of_device_id __initdata apbuart_match[] = {
 	{},
 };
 
-static struct of_platform_driver grlib_apbuart_of_driver = {
+static struct platform_driver grlib_apbuart_of_driver = {
 	.probe = apbuart_probe,
 	.driver = {
 		.owner = THIS_MODULE,
@@ -676,10 +675,10 @@ static int __init grlib_apbuart_init(void)
 		return ret;
 	}
 
-	ret = of_register_platform_driver(&grlib_apbuart_of_driver);
+	ret = platform_driver_register(&grlib_apbuart_of_driver);
 	if (ret) {
 		printk(KERN_ERR
-		       "%s: of_register_platform_driver failed (%i)\n",
+		       "%s: platform_driver_register failed (%i)\n",
 		       __FILE__, ret);
 		uart_unregister_driver(&grlib_apbuart_driver);
 		return ret;
@@ -697,7 +696,7 @@ static void __exit grlib_apbuart_exit(void)
 				     &grlib_apbuart_ports[i]);
 
 	uart_unregister_driver(&grlib_apbuart_driver);
-	of_unregister_platform_driver(&grlib_apbuart_of_driver);
+	platform_driver_unregister(&grlib_apbuart_of_driver);
 }
 
 module_init(grlib_apbuart_init);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 2a1d52fb4936..f119d1761106 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1240,6 +1240,21 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
+static void atmel_set_ldisc(struct uart_port *port, int new)
+{
+	int line = port->line;
+
+	if (line >= port->state->port.tty->driver->num)
+		return;
+
+	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		atmel_enable_ms(port);
+	} else {
+		port->flags &= ~UPF_HARDPPS_CD;
+	}
+}
+
 /*
  * Return string describing the specified port
  */
@@ -1380,6 +1395,7 @@ static struct uart_ops atmel_pops = {
 	.shutdown	= atmel_shutdown,
 	.flush_buffer	= atmel_flush_buffer,
 	.set_termios	= atmel_set_termios,
+	.set_ldisc	= atmel_set_ldisc,
 	.type		= atmel_type,
 	.release_port	= atmel_release_port,
 	.request_port	= atmel_request_port,
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index e95c524d9d18..c3ec0a61d859 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -788,7 +788,7 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
 		sport->port.mapbase = res->start;
 
 		sport->port.irq = platform_get_irq(pdev, 0);
-		if (sport->port.irq < 0) {
+		if ((int)sport->port.irq < 0) {
 			dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n");
 			ret = -ENOENT;
 			goto out_error_unmap;
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 8692ff98fc07..a9a6a5fd169e 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1359,8 +1359,7 @@ static struct uart_driver cpm_reg = {
 
 static int probe_index;
 
-static int __devinit cpm_uart_probe(struct platform_device *ofdev,
-                                    const struct of_device_id *match)
+static int __devinit cpm_uart_probe(struct platform_device *ofdev)
 {
 	int index = probe_index++;
 	struct uart_cpm_port *pinfo = &cpm_uart_ports[index];
@@ -1405,7 +1404,7 @@ static struct of_device_id cpm_uart_match[] = {
 	{}
 };
 
-static struct of_platform_driver cpm_uart_driver = {
+static struct platform_driver cpm_uart_driver = {
 	.driver = {
 		.name = "cpm_uart",
 		.owner = THIS_MODULE,
@@ -1421,7 +1420,7 @@ static int __init cpm_uart_init(void)
 	if (ret)
 		return ret;
 
-	ret = of_register_platform_driver(&cpm_uart_driver);
+	ret = platform_driver_register(&cpm_uart_driver);
 	if (ret)
 		uart_unregister_driver(&cpm_reg);
 
@@ -1430,7 +1429,7 @@ static int __init cpm_uart_init(void)
 
 static void __exit cpm_uart_exit(void)
 {
-	of_unregister_platform_driver(&cpm_uart_driver);
+	platform_driver_unregister(&cpm_uart_driver);
 	uart_unregister_driver(&cpm_reg);
 }
 
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index bcc31f2140ac..225123b37f19 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/