Merge tag 'pinctrl-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control patches for the v4.5 series.

  Notably I have a patch to driver core from Stephen Boyd in the pull
  request, this has been ACKed by Greg so it should be OK.  The internal
  API needed some tweaking to allow modular Qualcomm pin controllers.

  There is a bit of development history in here but it should all add up
  nicely and has boiled in linux-next.  For example I merged in v4.4-rc5
  to get rid of some nasty merge conflicts.

  Summary:

   - New drivers:
      - PXA2xx pin controller support
      - Broadcom NSP pin controller support

   - New subdrivers:
      - Samsung EXYNOS5410 support
      - Qualcomm MSM8996 support
      - Qualcomm PM8994 support
      - Qualcomm PM8994 MPP support
      - Allwinner sunxi H3 support
      - Allwinner sunxi A80 support
      - Rockchip RK3228 support

   - Rename the Cygnus pinctrl driver to "iproc" as it is more generic
     than was originally thought.

   - A bunch of Lantiq/Xway updates especially from the OpenWRT people.

   - Several refactorings for the Super-H SH PFC pin controllers.
     Adding SCIF_CLK support.

   - Several fixes to the Atlas 7 driver.

   - Various fixes all over the place"

* tag 'pinctrl-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits)
  pinctrl: mediatek: Modify pinctrl bindings for mt2701
  Revert "pinctrl: qcom: make PMIC drivers bool"
  pinctrl: qcom: Use platform_irq_count() instead of of_irq_count()
  driver-core: platform: Add platform_irq_count()
  pinctrl: lantiq: 2 pins have the wrong mux list
  pinctrl: qcom: make PMIC drivers bool
  pinctrl: nsp-gpio: forever loop in nsp_gpio_get_strength()
  pinctrl: mediatek: convert to arch_initcall
  pinctrl: bcm2835: Fix memory leak in error path
  pinctrl: mediatek: add missing of_node_put
  pinctrl: rockchip: add missing of_node_put
  pinctrl: sh-pfc: add missing of_node_put
  pinctrl: sirf: add missing of_node_put
  pinctrl-tegra: add missing of_node_put
  pinctrl: sunxi: Add A80 special pin controller
  pinctrl: bcm/cygnys/iproc: fixup rebase issue
  pinctrl: fixup problematic flag
  MAINTAINERS: Add co-maintainer for Renesas Pin Controllers
  pinctrl: sh-pfc: r8a7791: add EtherAVB pin groups
  pinctrl: sh-pfc: r8a7795: Add SATA support
  ...

60 files changed, 8627 insertions, 751 deletions

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 312c78b27a32..99a4c10ed43f 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -244,7 +244,7 @@ config PINCTRL_ZYNQ
 	select PINMUX
 	select GENERIC_PINCONF
 	help
-	  This selectes the pinctrl driver for Xilinx Zynq.
+	  This selects the pinctrl driver for Xilinx Zynq.
 
 source "drivers/pinctrl/bcm/Kconfig"
 source "drivers/pinctrl/berlin/Kconfig"
@@ -252,6 +252,7 @@ source "drivers/pinctrl/freescale/Kconfig"
 source "drivers/pinctrl/intel/Kconfig"
 source "drivers/pinctrl/mvebu/Kconfig"
 source "drivers/pinctrl/nomadik/Kconfig"
+source "drivers/pinctrl/pxa/Kconfig"
 source "drivers/pinctrl/qcom/Kconfig"
 source "drivers/pinctrl/samsung/Kconfig"
 source "drivers/pinctrl/sh-pfc/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 738cb4929a49..bf1b5ca5180b 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -41,15 +41,16 @@ obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
 obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o
 
 obj-$(CONFIG_ARCH_BCM)		+= bcm/
-obj-$(CONFIG_ARCH_BERLIN)	+= berlin/
+obj-$(CONFIG_PINCTRL_BERLIN)	+= berlin/
 obj-y				+= freescale/
 obj-$(CONFIG_X86)		+= intel/
-obj-$(CONFIG_PLAT_ORION)        += mvebu/
+obj-$(CONFIG_PINCTRL_MVEBU)	+= mvebu/
 obj-y				+= nomadik/
+obj-$(CONFIG_ARCH_PXA)		+= pxa/
 obj-$(CONFIG_ARCH_QCOM)		+= qcom/
 obj-$(CONFIG_PINCTRL_SAMSUNG)	+= samsung/
 obj-$(CONFIG_PINCTRL_SH_PFC)	+= sh-pfc/
-obj-$(CONFIG_PLAT_SPEAR)	+= spear/
+obj-$(CONFIG_PINCTRL_SPEAR)	+= spear/
 obj-$(CONFIG_ARCH_SUNXI)	+= sunxi/
 obj-$(CONFIG_PINCTRL_UNIPHIER)	+= uniphier/
 obj-$(CONFIG_ARCH_VT8500)	+= vt8500/
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index cd11d4d9ad58..2cc74384cafa 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -9,6 +9,7 @@ config PINCTRL_BCM281XX
 	select PINCONF
 	select GENERIC_PINCONF
 	select REGMAP_MMIO
+	default ARCH_BCM_MOBILE
 	help
 	  Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
 	  for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
@@ -20,27 +21,41 @@ config PINCTRL_BCM2835
 	select PINMUX
 	select PINCONF
 
-config PINCTRL_CYGNUS_GPIO
-	bool "Broadcom Cygnus GPIO (with PINCONF) driver"
-	depends on OF_GPIO && ARCH_BCM_CYGNUS
+config PINCTRL_IPROC_GPIO
+	bool "Broadcom iProc GPIO (with PINCONF) driver"
+	depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
 	select GPIOLIB_IRQCHIP
 	select PINCONF
 	select GENERIC_PINCONF
-	default ARCH_BCM_CYGNUS
+	default ARCH_BCM_IPROC
 	help
-	  Say yes here to enable the Broadcom Cygnus GPIO driver.
+	  Say yes here to enable the Broadcom iProc GPIO driver.
+
+	  The Broadcom iProc based SoCs- Cygnus, NS2, NSP and Stingray, use
+	  same GPIO Controller IP hence this driver could be used for all.
 
 	  The Broadcom Cygnus SoC has 3 GPIO controllers including the ASIU
 	  GPIO controller (ASIU), the chipCommonG GPIO controller (CCM), and
 	  the always-ON GPIO controller (CRMU/AON). All 3 GPIO controllers are
 	  supported by this driver.
 
-	  All 3 Cygnus GPIO controllers support basic PINCONF functions such
+	  The Broadcom NSP has two GPIO controllers including the ChipcommonA
+	  GPIO, the ChipcommonB GPIO. Later controller is supported by this
+	  driver.
+
+	  The Broadcom NS2 has two GPIO controller including the CRMU GPIO,
+	  the ChipcommonG GPIO. Both controllers are supported by this driver.
+
+	  The Broadcom Stingray GPIO controllers are supported by this driver.
+
+	  All above SoCs GPIO controllers support basic PINCONF functions such
 	  as bias pull up, pull down, and drive strength configurations, when
 	  these pins are muxed to GPIO.
 
-	  Pins from the ASIU GPIO can be individually muxed to GPIO function,
-	  through interaction with the Cygnus IOMUX controller.
+	  It provides the framework where pins from the individual GPIO can be
+	  individually muxed to GPIO function, through interaction with the
+	  SoCs IOMUX controller. This features could be used only on SoCs which
+	  support individual pin muxing.
 
 config PINCTRL_CYGNUS_MUX
 	bool "Broadcom Cygnus IOMUX driver"
@@ -54,3 +69,20 @@ config PINCTRL_CYGNUS_MUX
 	  The Broadcom Cygnus IOMUX driver supports group based IOMUX
 	  configuration, with the exception that certain individual pins
 	  can be overrided to GPIO function
+
+config PINCTRL_NSP_GPIO
+	bool "Broadcom NSP GPIO (with PINCONF) driver"
+	depends on OF_GPIO && (ARCH_BCM_NSP || COMPILE_TEST)
+	select GPIOLIB_IRQCHIP
+	select PINCONF
+	select GENERIC_PINCONF
+	default ARCH_BCM_NSP
+	help
+	  Say yes here to enable the Broadcom NSP GPIO driver.
+
+	  The Broadcom Northstar Plus SoC ChipcommonA GPIO controller is
+	  supported by this driver.
+
+	  The ChipcommonA GPIO controller support basic PINCONF functions such
+	  as bias pull up, pull down, and drive strength configurations, when
+	  these pins are muxed to GPIO.
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 2b2f70ee804c..6148367d5e8c 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -2,5 +2,6 @@
 
 obj-$(CONFIG_PINCTRL_BCM281XX)		+= pinctrl-bcm281xx.o
 obj-$(CONFIG_PINCTRL_BCM2835)		+= pinctrl-bcm2835.o
-obj-$(CONFIG_PINCTRL_CYGNUS_GPIO)	+= pinctrl-cygnus-gpio.o
+obj-$(CONFIG_PINCTRL_IPROC_GPIO)	+= pinctrl-iproc-gpio.o
 obj-$(CONFIG_PINCTRL_CYGNUS_MUX)	+= pinctrl-cygnus-mux.o
+obj-$(CONFIG_PINCTRL_NSP_GPIO)		+= pinctrl-nsp-gpio.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 2e6ca69635aa..75b0d8c8f058 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -795,7 +795,7 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
 	return 0;
 
 out:
-	kfree(maps);
+	bcm2835_pctl_dt_free_map(pctldev, maps, num_pins * maps_per_pin);
 	return err;
 }
 
diff --git a/drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
index 12a48f498b75..314591a4609b 100644
--- a/drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c
+++ b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
@@ -10,14 +10,16 @@
  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * This file contains the Broadcom Cygnus GPIO driver that supports 3
- * GPIO controllers on Cygnus including the ASIU GPIO controller, the
+ * This file contains the Broadcom Iproc GPIO driver that supports 3
+ * GPIO controllers on Iproc including the ASIU GPIO controller, the
  * chipCommonG GPIO controller, and the always-on GPIO controller. Basic
  * PINCONF such as bias pull up/down, and drive strength are also supported
  * in this driver.
  *
- * Pins from the ASIU GPIO can be individually muxed to GPIO function,
- * through the interaction with the Cygnus IOMUX controller
+ * It provides the functionality where pins from the GPIO can be
+ * individually muxed to GPIO function, if individual pad
+ * configuration is supported, through the interaction with respective
+ * SoCs IOMUX controller.
  */
 
 #include <linux/kernel.h>
@@ -34,42 +36,42 @@
 
 #include "../pinctrl-utils.h"
 
-#define CYGNUS_GPIO_DATA_IN_OFFSET   0x00
-#define CYGNUS_GPIO_DATA_OUT_OFFSET  0x04
-#define CYGNUS_GPIO_OUT_EN_OFFSET    0x08
-#define CYGNUS_GPIO_INT_TYPE_OFFSET  0x0c
-#define CYGNUS_GPIO_INT_DE_OFFSET    0x10
-#define CYGNUS_GPIO_INT_EDGE_OFFSET  0x14
-#define CYGNUS_GPIO_INT_MSK_OFFSET   0x18
-#define CYGNUS_GPIO_INT_STAT_OFFSET  0x1c
-#define CYGNUS_GPIO_INT_MSTAT_OFFSET 0x20
-#define CYGNUS_GPIO_INT_CLR_OFFSET   0x24
-#define CYGNUS_GPIO_PAD_RES_OFFSET   0x34
-#define CYGNUS_GPIO_RES_EN_OFFSET    0x38
+#define IPROC_GPIO_DATA_IN_OFFSET   0x00
+#define IPROC_GPIO_DATA_OUT_OFFSET  0x04
+#define IPROC_GPIO_OUT_EN_OFFSET    0x08
+#define IPROC_GPIO_INT_TYPE_OFFSET  0x0c
+#define IPROC_GPIO_INT_DE_OFFSET    0x10
+#define IPROC_GPIO_INT_EDGE_OFFSET  0x14
+#define IPROC_GPIO_INT_MSK_OFFSET   0x18
+#define IPROC_GPIO_INT_STAT_OFFSET  0x1c
+#define IPROC_GPIO_INT_MSTAT_OFFSET 0x20
+#define IPROC_GPIO_INT_CLR_OFFSET   0x24
+#define IPROC_GPIO_PAD_RES_OFFSET   0x34
+#define IPROC_GPIO_RES_EN_OFFSET    0x38
 
 /* drive strength control for ASIU GPIO */
-#define CYGNUS_GPIO_ASIU_DRV0_CTRL_OFFSET 0x58
+#define IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET 0x58
 
 /* drive strength control for CCM/CRMU (AON) GPIO */
-#define CYGNUS_GPIO_DRV0_CTRL_OFFSET  0x00
+#define IPROC_GPIO_DRV0_CTRL_OFFSET  0x00
 
 #define GPIO_BANK_SIZE 0x200
 #define NGPIOS_PER_BANK 32
 #define GPIO_BANK(pin) ((pin) / NGPIOS_PER_BANK)
 
-#define CYGNUS_GPIO_REG(pin, reg) (GPIO_BANK(pin) * GPIO_BANK_SIZE + (reg))
-#define CYGNUS_GPIO_SHIFT(pin) ((pin) % NGPIOS_PER_BANK)
+#define IPROC_GPIO_REG(pin, reg) (GPIO_BANK(pin) * GPIO_BANK_SIZE + (reg))
+#define IPROC_GPIO_SHIFT(pin) ((pin) % NGPIOS_PER_BANK)
 
 #define GPIO_DRV_STRENGTH_BIT_SHIFT  20
 #define GPIO_DRV_STRENGTH_BITS       3
 #define GPIO_DRV_STRENGTH_BIT_MASK   ((1 << GPIO_DRV_STRENGTH_BITS) - 1)
 
 /*
- * Cygnus GPIO core
+ * Iproc GPIO core
  *
  * @dev: pointer to device
- * @base: I/O register base for Cygnus GPIO controller
- * @io_ctrl: I/O register base for certain type of Cygnus GPIO controller that
+ * @base: I/O register base for Iproc GPIO controller
+ * @io_ctrl: I/O register base for certain type of Iproc GPIO controller that
  * has the PINCONF support implemented outside of the GPIO block
  * @lock: lock to protect access to I/O registers
  * @gc: GPIO chip
@@ -79,7 +81,7 @@
  * @pctl: pointer to pinctrl_dev
  * @pctldesc: pinctrl descriptor
  */
-struct cygnus_gpio {
+struct iproc_gpio {
 	struct device *dev;
 
 	void __iomem *base;
@@ -96,33 +98,33 @@ struct cygnus_gpio {
 	struct pinctrl_desc pctldesc;
 };
 
-static inline struct cygnus_gpio *to_cygnus_gpio(struct gpio_chip *gc)
+static inline struct iproc_gpio *to_iproc_gpio(struct gpio_chip *gc)
 {
-	return container_of(gc, struct cygnus_gpio, gc);
+	return container_of(gc, struct iproc_gpio, gc);
 }
 
 /*
  * Mapping from PINCONF pins to GPIO pins is 1-to-1
  */
-static inline unsigned cygnus_pin_to_gpio(unsigned pin)
+static inline unsigned iproc_pin_to_gpio(unsigned pin)
 {
 	return pin;
 }
 
 /**
- *  cygnus_set_bit - set or clear one bit (corresponding to the GPIO pin) in a
- *  Cygnus GPIO register
+ *  iproc_set_bit - set or clear one bit (corresponding to the GPIO pin) in a
+ *  Iproc GPIO register
  *
- *  @cygnus_gpio: Cygnus GPIO device
+ *  @iproc_gpio: Iproc GPIO device
  *  @reg: register offset
  *  @gpio: GPIO pin
  *  @set: set or clear
  */
-static inline void cygnus_set_bit(struct cygnus_gpio *chip, unsigned int reg,
+static inline void iproc_set_bit(struct iproc_gpio *chip, unsigned int reg,
 				  unsigned gpio, bool set)
 {
-	unsigned int offset = CYGNUS_GPIO_REG(gpio, reg);
-	unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
+	unsigned int offset = IPROC_GPIO_REG(gpio, reg);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
 	u32 val;
 
 	val = readl(chip->base + offset);
@@ -133,19 +135,19 @@ static inline void cygnus_set_bit(struct cygnus_gpio *chip, unsigned int reg,
 	writel(val, chip->base + offset);
 }
 
-static inline bool cygnus_get_bit(struct cygnus_gpio *chip, unsigned int reg,
+static inline bool iproc_get_bit(struct iproc_gpio *chip, unsigned int reg,
 				  unsigned gpio)
 {
-	unsigned int offset = CYGNUS_GPIO_REG(gpio, reg);
-	unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
+	unsigned int offset = IPROC_GPIO_REG(gpio, reg);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
 
 	return !!(readl(chip->base + offset) & BIT(shift));
 }
 
-static void cygnus_gpio_irq_handler(struct irq_desc *desc)
+static void iproc_gpio_irq_handler(struct irq_desc *desc)
 {
 	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
 	int i, bit;
 
@@ -154,7 +156,7 @@ static void cygnus_gpio_irq_handler(struct irq_desc *desc)
 	/* go through the entire GPIO banks and handle all interrupts */
 	for (i = 0; i < chip->num_banks; i++) {
 		unsigned long val = readl(chip->base + (i * GPIO_BANK_SIZE) +
-					  CYGNUS_GPIO_INT_MSTAT_OFFSET);
+					  IPROC_GPIO_INT_MSTAT_OFFSET);
 
 		for_each_set_bit(bit, &val, NGPIOS_PER_BANK) {
 			unsigned pin = NGPIOS_PER_BANK * i + bit;
@@ -165,7 +167,7 @@ static void cygnus_gpio_irq_handler(struct irq_desc *desc)
 			 * handler, so we do not leave any window
 			 */
 			writel(BIT(bit), chip->base + (i * GPIO_BANK_SIZE) +
-			       CYGNUS_GPIO_INT_CLR_OFFSET);
+			       IPROC_GPIO_INT_CLR_OFFSET);
 
 			generic_handle_irq(child_irq);
 		}
@@ -175,60 +177,60 @@ static void cygnus_gpio_irq_handler(struct irq_desc *desc)
 }
 
 
-static void cygnus_gpio_irq_ack(struct irq_data *d)
+static void iproc_gpio_irq_ack(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned gpio = d->hwirq;
-	unsigned int offset = CYGNUS_GPIO_REG(gpio,
-			CYGNUS_GPIO_INT_CLR_OFFSET);
-	unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
+	unsigned int offset = IPROC_GPIO_REG(gpio,
+			IPROC_GPIO_INT_CLR_OFFSET);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
 	u32 val = BIT(shift);
 
 	writel(val, chip->base + offset);
 }
 
 /**
- *  cygnus_gpio_irq_set_mask - mask/unmask a GPIO interrupt
+ *  iproc_gpio_irq_set_mask - mask/unmask a GPIO interrupt
  *
  *  @d: IRQ chip data
  *  @unmask: mask/unmask GPIO interrupt
  */
-static void cygnus_gpio_irq_set_mask(struct irq_data *d, bool unmask)
+static void iproc_gpio_irq_set_mask(struct irq_data *d, bool unmask)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned gpio = d->hwirq;
 
-	cygnus_set_bit(chip, CYGNUS_GPIO_INT_MSK_OFFSET, gpio, unmask);
+	iproc_set_bit(chip, IPROC_GPIO_INT_MSK_OFFSET, gpio, unmask);
 }
 
-static void cygnus_gpio_irq_mask(struct irq_data *d)
+static void iproc_gpio_irq_mask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->lock, flags);
-	cygnus_gpio_irq_set_mask(d, false);
+	iproc_gpio_irq_set_mask(d, false);
 	spin_unlock_irqrestore(&chip->lock, flags);
 }
 
-static void cygnus_gpio_irq_unmask(struct irq_data *d)
+static void iproc_gpio_irq_unmask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->lock, flags);
-	cygnus_gpio_irq_set_mask(d, true);
+	iproc_gpio_irq_set_mask(d, true);
 	spin_unlock_irqrestore(&chip->lock, flags);
 }
 
-static int cygnus_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+static int iproc_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned gpio = d->hwirq;
 	bool level_triggered = false;
 	bool dual_edge = false;
@@ -263,10 +265,10 @@ static int cygnus_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	}
 
 	spin_lock_irqsave(&chip->lock, flags);
-	cygnus_set_bit(chip, CYGNUS_GPIO_INT_TYPE_OFFSET, gpio,
+	iproc_set_bit(chip, IPROC_GPIO_INT_TYPE_OFFSET, gpio,
 		       level_triggered);
-	cygnus_set_bit(chip, CYGNUS_GPIO_INT_DE_OFFSET, gpio, dual_edge);
-	cygnus_set_bit(chip, CYGNUS_GPIO_INT_EDGE_OFFSET, gpio,
+	iproc_set_bit(chip, IPROC_GPIO_INT_DE_OFFSET, gpio, dual_edge);
+	iproc_set_bit(chip, IPROC_GPIO_INT_EDGE_OFFSET, gpio,
 		       rising_or_high);
 	spin_unlock_irqrestore(&chip->lock, flags);
 
@@ -277,32 +279,32 @@ static int cygnus_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	return 0;
 }
 
-static struct irq_chip cygnus_gpio_irq_chip = {
-	.name = "bcm-cygnus-gpio",
-	.irq_ack = cygnus_gpio_irq_ack,
-	.irq_mask = cygnus_gpio_irq_mask,
-	.irq_unmask = cygnus_gpio_irq_unmask,
-	.irq_set_type = cygnus_gpio_irq_set_type,
+static struct irq_chip iproc_gpio_irq_chip = {
+	.name = "bcm-iproc-gpio",
+	.irq_ack = iproc_gpio_irq_ack,
+	.irq_mask = iproc_gpio_irq_mask,
+	.irq_unmask = iproc_gpio_irq_unmask,
+	.irq_set_type = iproc_gpio_irq_set_type,
 };
 
 /*
- * Request the Cygnus IOMUX pinmux controller to mux individual pins to GPIO
+ * Request the Iproc IOMUX pinmux controller to mux individual pins to GPIO
  */
-static int cygnus_gpio_request(struct gpio_chip *gc, unsigned offset)
+static int iproc_gpio_request(struct gpio_chip *gc, unsigned offset)
 {
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned gpio = gc->base + offset;
 
-	/* not all Cygnus GPIO pins can be muxed individually */
+	/* not all Iproc GPIO pins can be muxed individually */
 	if (!chip->pinmux_is_supported)
 		return 0;
 
 	return pinctrl_request_gpio(gpio);
 }
 
-static void cygnus_gpio_free(struct gpio_chip *gc, unsigned offset)
+static void iproc_gpio_free(struct gpio_chip *gc, unsigned offset)
 {
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned gpio = gc->base + offset;
 
 	if (!chip->pinmux_is_supported)
@@ -311,13 +313,13 @@ static void cygnus_gpio_free(struct gpio_chip *gc, unsigned offset)
 	pinctrl_free_gpio(gpio);
 }
 
-static int cygnus_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
+static int iproc_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
 {
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->lock, flags);
-	cygnus_set_bit(chip, CYGNUS_GPIO_OUT_EN_OFFSET, gpio, false);
+	iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, false);
 	spin_unlock_irqrestore(&chip->lock, flags);
 
 	dev_dbg(chip->dev, "gpio:%u set input\n", gpio);
@@ -325,15 +327,15 @@ static int cygnus_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
 	return 0;
 }
 
-static int cygnus_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
+static int iproc_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
 					int val)
 {
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->lock, flags);
-	cygnus_set_bit(chip, CYGNUS_GPIO_OUT_EN_OFFSET, gpio, true);
-	cygnus_set_bit(chip, CYGNUS_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
+	iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, true);
+	iproc_set_bit(chip, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
 	s