Merge tag 'iio-for-4.19b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support, features and cleanups.

There are also a couple of fixes that can wait for the coming merge
window.

Core new features

* Support for phase channels (used in time of flight sensors amongst
  other things)
* Support for deep UV light channel modifier.

New Device Support

* AD4758 DAC
  - New driver and dt bindings.
* adxl345
  - Support the adxl375 +-200g part which is register compatible.
* isl29501 Time of flight sensor.
  - New driver
* meson-saradc
  - Support the Meson8m2 Socs - right now this is just an ID, but there will
    be additional difference in future.
* mpu6050
  - New ID for 6515 variant.
* si1133 UV sensor.
  - New driver
* Spreadtrum SC27xx PMIC ADC
  - New driver and dt bindings.

Features

* adxl345
  - Add calibration offset readback and writing.
  - Add sampling frequency control.

Fixes and Cleanups

* ad5933
  - Use a macro for the channel definition to reduce duplication.
* ad9523
  - Replace use of core mlock with a local lock. Part of ongoing efforts
    to avoid confusing the purpose of mlock which is only about iio core
    state changes.
  - Fix displayed phase which was out by a factor of 10.
* adxl345
  - Add a link to the datasheet.
  - Rework the use of the address field in the chan_spec structures to
    allow addition of more per channel information.
* adis imu
  - Mark switch fall throughs.
* at91-sama5d2
  - Fix some casting on big endian systems.
* bmp280
  - Drop some DT elements that aren't used and should mostly be done from
    userspace rather than in DT.
* hx711
  - add clock-frequency dt binding and resulting delay to deal with capacitance
    issue on some boards.
  - fix a spurious unit-address in the example.
* ina2xx
  - Avoid a possible kthread_stop with a stale task_struct.
* ltc2632
  - Remove some unused local variables (assigned but value never used).
* max1363
  - Use device_get_match_data to remove some boilerplate.
* mma8452
  - Mark switch fall throughs.
* sca3000
  - Fix a missing return in a switch statement (a bad fallthrough
    previously!)
* sigma-delta-modulator
  - Drop incorrect unit address from the DT example.
* st_accel
  - Use device_get_match_data to drop some boiler plate.
  - Move to probe_new for i2c driver as second parameter not used.
* st_sensors library
  - Use a strlcpy (safe in this case).
* st_lsm6dsx
  - Add some error logging.
* ti-ads7950
  - SPDX
  - Allow simultaneous buffered and polled reads. Needed on a Lego Mindstorms
    EV3 where some channels are used for power supply monitoring at a very low
    rate.
* ti-dac5571
  - Remove an unused variable.
* xadc
  - Drop some dead code.

38 files changed, 3883 insertions, 124 deletions

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 62ae7e5abcfa..829dc96c9dd6 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -40,7 +40,7 @@ config ADXL345_I2C
 	select REGMAP_I2C
 	help
 	  Say Y here if you want to build support for the Analog Devices
-	  ADXL345 3-axis digital accelerometer.
+	  ADXL345 or ADXL375 3-axis digital accelerometer.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called adxl345_i2c and you will also get adxl345_core
@@ -54,7 +54,7 @@ config ADXL345_SPI
 	select REGMAP_SPI
 	help
 	  Say Y here if you want to build support for the Analog Devices
-	  ADXL345 3-axis digital accelerometer.
+	  ADXL345 or ADXL375 3-axis digital accelerometer.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called adxl345_spi and you will also get adxl345_core
diff --git a/drivers/iio/accel/adxl345.h b/drivers/iio/accel/adxl345.h
index c1ddf3927c47..ccd63de7a55a 100644
--- a/drivers/iio/accel/adxl345.h
+++ b/drivers/iio/accel/adxl345.h
@@ -11,8 +11,13 @@
 #ifndef _ADXL345_H_
 #define _ADXL345_H_
 
+enum adxl345_device_type {
+	ADXL345,
+	ADXL375,
+};
+
 int adxl345_core_probe(struct device *dev, struct regmap *regmap,
-		       const char *name);
+		       enum adxl345_device_type type, const char *name);
 int adxl345_core_remove(struct device *dev);
 
 #endif /* _ADXL345_H_ */
diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 7251d0e63d74..780f87f72338 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -6,21 +6,35 @@
  * This file is subject to the terms and conditions of version 2 of
  * the GNU General Public License. See the file COPYING in the main
  * directory of this archive for more details.
+ *
+ * Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf
  */
 
 #include <linux/module.h>
 #include <linux/regmap.h>
 
 #include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #include "adxl345.h"
 
 #define ADXL345_REG_DEVID		0x00
+#define ADXL345_REG_OFSX		0x1e
+#define ADXL345_REG_OFSY		0x1f
+#define ADXL345_REG_OFSZ		0x20
+#define ADXL345_REG_OFS_AXIS(index)	(ADXL345_REG_OFSX + (index))
+#define ADXL345_REG_BW_RATE		0x2C
 #define ADXL345_REG_POWER_CTL		0x2D
 #define ADXL345_REG_DATA_FORMAT		0x31
 #define ADXL345_REG_DATAX0		0x32
 #define ADXL345_REG_DATAY0		0x34
 #define ADXL345_REG_DATAZ0		0x36
+#define ADXL345_REG_DATA_AXIS(index)	\
+	(ADXL345_REG_DATAX0 + (index) * sizeof(__le16))
+
+#define ADXL345_BW_RATE			GENMASK(3, 0)
+#define ADXL345_BASE_RATE_NANO_HZ	97656250LL
+#define NHZ_PER_HZ			1000000000LL
 
 #define ADXL345_POWER_CTL_MEASURE	BIT(3)
 #define ADXL345_POWER_CTL_STANDBY	0x00
@@ -42,24 +56,33 @@
  */
 static const int adxl345_uscale = 38300;
 
+/*
+ * The Datasheet lists a resolution of Resolution is ~49 mg per LSB. That's
+ * ~480mm/s**2 per LSB.
+ */
+static const int adxl375_uscale = 480000;
+
 struct adxl345_data {
 	struct regmap *regmap;
 	u8 data_range;
+	enum adxl345_device_type type;
 };
 
-#define ADXL345_CHANNEL(reg, axis) {					\
+#define ADXL345_CHANNEL(index, axis) {					\
 	.type = IIO_ACCEL,						\
 	.modified = 1,							\
 	.channel2 = IIO_MOD_##axis,					\
-	.address = reg,							\
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
-	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
+	.address = index,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
+		BIT(IIO_CHAN_INFO_CALIBBIAS),				\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |		\
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),				\
 }
 
 static const struct iio_chan_spec adxl345_channels[] = {
-	ADXL345_CHANNEL(ADXL345_REG_DATAX0, X),
-	ADXL345_CHANNEL(ADXL345_REG_DATAY0, Y),
-	ADXL345_CHANNEL(ADXL345_REG_DATAZ0, Z),
+	ADXL345_CHANNEL(0, X),
+	ADXL345_CHANNEL(1, Y),
+	ADXL345_CHANNEL(2, Z),
 };
 
 static int adxl345_read_raw(struct iio_dev *indio_dev,
@@ -67,7 +90,9 @@ static int adxl345_read_raw(struct iio_dev *indio_dev,
 			    int *val, int *val2, long mask)
 {
 	struct adxl345_data *data = iio_priv(indio_dev);
-	__le16 regval;
+	__le16 accel;
+	long long samp_freq_nhz;
+	unsigned int regval;
 	int ret;
 
 	switch (mask) {
@@ -77,29 +102,117 @@ static int adxl345_read_raw(struct iio_dev *indio_dev,
 		 * ADXL345_REG_DATA(X0/Y0/Z0) contain the least significant byte
 		 * and ADXL345_REG_DATA(X0/Y0/Z0) + 1 the most significant byte
 		 */
-		ret = regmap_bulk_read(data->regmap, chan->address, &regval,
-				       sizeof(regval));
+		ret = regmap_bulk_read(data->regmap,
+				       ADXL345_REG_DATA_AXIS(chan->address),
+				       &accel, sizeof(accel));
 		if (ret < 0)
 			return ret;
 
-		*val = sign_extend32(le16_to_cpu(regval), 12);
+		*val = sign_extend32(le16_to_cpu(accel), 12);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		*val = 0;
-		*val2 = adxl345_uscale;
+		switch (data->type) {
+		case ADXL345:
+			*val2 = adxl345_uscale;
+			break;
+		case ADXL375:
+			*val2 = adxl375_uscale;
+			break;
+		}
 
 		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		ret = regmap_read(data->regmap,
+				  ADXL345_REG_OFS_AXIS(chan->address), &regval);
+		if (ret < 0)
+			return ret;
+		/*
+		 * 8-bit resolution at +/- 2g, that is 4x accel data scale
+		 * factor
+		 */
+		*val = sign_extend32(regval, 7) * 4;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = regmap_read(data->regmap, ADXL345_REG_BW_RATE, &regval);
+		if (ret < 0)
+			return ret;
+
+		samp_freq_nhz = ADXL345_BASE_RATE_NANO_HZ <<
+				(regval & ADXL345_BW_RATE);
+		*val = div_s64_rem(samp_freq_nhz, NHZ_PER_HZ, val2);
+
+		return IIO_VAL_INT_PLUS_NANO;
 	}
 
 	return -EINVAL;
 }
 
+static int adxl345_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct adxl345_data *data = iio_priv(indio_dev);
+	s64 n;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		/*
+		 * 8-bit resolution at +/- 2g, that is 4x accel data scale
+		 * factor
+		 */
+		return regmap_write(data->regmap,
+				    ADXL345_REG_OFS_AXIS(chan->address),
+				    val / 4);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		n = div_s64(val * NHZ_PER_HZ + val2, ADXL345_BASE_RATE_NANO_HZ);
+
+		return regmap_update_bits(data->regmap, ADXL345_REG_BW_RATE,
+					  ADXL345_BW_RATE,
+					  clamp_val(ilog2(n), 0,
+						    ADXL345_BW_RATE));
+	}
+
+	return -EINVAL;
+}
+
+static int adxl345_write_raw_get_fmt(struct iio_dev *indio_dev,
+				     struct iio_chan_spec const *chan,
+				     long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return IIO_VAL_INT_PLUS_NANO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
+"0.09765625 0.1953125 0.390625 0.78125 1.5625 3.125 6.25 12.5 25 50 100 200 400 800 1600 3200"
+);
+
+static struct attribute *adxl345_attrs[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group adxl345_attrs_group = {
+	.attrs = adxl345_attrs,
+};
+
 static const struct iio_info adxl345_info = {
+	.attrs		= &adxl345_attrs_group,
 	.read_raw	= adxl345_read_raw,
+	.write_raw	= adxl345_write_raw,
+	.write_raw_get_fmt	= adxl345_write_raw_get_fmt,
 };
 
 int adxl345_core_probe(struct device *dev, struct regmap *regmap,
-		       const char *name)
+		       enum adxl345_device_type type, const char *name)
 {
 	struct adxl345_data *data;
 	struct iio_dev *indio_dev;
@@ -125,6 +238,7 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 	data = iio_priv(indio_dev);
 	dev_set_drvdata(dev, indio_dev);
 	data->regmap = regmap;
+	data->type = type;
 	/* Enable full-resolution mode */
 	data->data_range = ADXL345_DATA_FORMAT_FULL_RES;
 
diff --git a/drivers/iio/accel/adxl345_i2c.c b/drivers/iio/accel/adxl345_i2c.c
index 05e1ec49700c..785c89de91e7 100644
--- a/drivers/iio/accel/adxl345_i2c.c
+++ b/drivers/iio/accel/adxl345_i2c.c
@@ -34,7 +34,8 @@ static int adxl345_i2c_probe(struct i2c_client *client,
 		return PTR_ERR(regmap);
 	}
 
-	return adxl345_core_probe(&client->dev, regmap, id ? id->name : NULL);
+	return adxl345_core_probe(&client->dev, regmap, id->driver_data,
+				  id ? id->name : NULL);
 }
 
 static int adxl345_i2c_remove(struct i2c_client *client)
@@ -43,7 +44,8 @@ static int adxl345_i2c_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id adxl345_i2c_id[] = {
-	{ "adxl345", 0 },
+	{ "adxl345", ADXL345 },
+	{ "adxl375", ADXL375 },
 	{ }
 };
 
@@ -51,6 +53,7 @@ MODULE_DEVICE_TABLE(i2c, adxl345_i2c_id);
 
 static const struct of_device_id adxl345_of_match[] = {
 	{ .compatible = "adi,adxl345" },
+	{ .compatible = "adi,adxl375" },
 	{ },
 };
 
diff --git a/drivers/iio/accel/adxl345_spi.c b/drivers/iio/accel/adxl345_spi.c
index 6d658196f81c..67b7c66a8492 100644
--- a/drivers/iio/accel/adxl345_spi.c
+++ b/drivers/iio/accel/adxl345_spi.c
@@ -42,7 +42,7 @@ static int adxl345_spi_probe(struct spi_device *spi)
 		return PTR_ERR(regmap);
 	}
 
-	return adxl345_core_probe(&spi->dev, regmap, id->name);
+	return adxl345_core_probe(&spi->dev, regmap, id->driver_data, id->name);
 }
 
 static int adxl345_spi_remove(struct spi_device *spi)
@@ -51,7 +51,8 @@ static int adxl345_spi_remove(struct spi_device *spi)
 }
 
 static const struct spi_device_id adxl345_spi_id[] = {
-	{ "adxl345", 0 },
+	{ "adxl345", ADXL345 },
+	{ "adxl375", ADXL375 },
 	{ }
 };
 
@@ -59,6 +60,7 @@ MODULE_DEVICE_TABLE(spi, adxl345_spi_id);
 
 static const struct of_device_id adxl345_of_match[] = {
 	{ .compatible = "adi,adxl345" },
+	{ .compatible = "adi,adxl375" },
 	{ },
 };
 
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index c149c9c360fc..421a0a8a1379 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1547,6 +1547,7 @@ static int mma8452_probe(struct i2c_client *client,
 	case FXLS8471_DEVICE_ID:
 		if (ret == data->chip_info->chip_id)
 			break;
+		/* else: fall through */
 	default:
 		return -ENODEV;
 	}
diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c
index 4dceb75e3586..4964561595f5 100644
--- a/drivers/iio/accel/sca3000.c
+++ b/drivers/iio/accel/sca3000.c
@@ -797,6 +797,7 @@ static int sca3000_write_raw(struct iio_dev *indio_dev,
 		mutex_lock(&st->lock);
 		ret = sca3000_write_3db_freq(st, val);
 		mutex_unlock(&st->lock);
+		return ret;
 	default:
 		return -EINVAL;
 	}
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index 056dddb27236..2ca5d1f6ade0 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -14,8 +14,8 @@
 #include <linux/acpi.h>
 #include <linux/i2c.h>
 #include <linux/iio/iio.h>
+#include <linux/property.h>
 
-#include <linux/iio/common/st_sensors.h>
 #include <linux/iio/common/st_sensors_i2c.h>
 #include "st_accel.h"
 
@@ -107,8 +107,8 @@ MODULE_DEVICE_TABLE(of, st_accel_of_match);
 
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id st_accel_acpi_match[] = {
-	{"SMO8840", LNG2DM},
-	{"SMO8A90", LNG2DM},
+	{"SMO8840", (kernel_ulong_t)LNG2DM_ACCEL_DEV_NAME},
+	{"SMO8A90", (kernel_ulong_t)LNG2DM_ACCEL_DEV_NAME},
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, st_accel_acpi_match);
@@ -117,33 +117,33 @@ MODULE_DEVICE_TABLE(acpi, st_accel_acpi_match);
 #endif
 
 static const struct i2c_device_id st_accel_id_table[] = {
-	{ LSM303DLH_ACCEL_DEV_NAME, LSM303DLH },
-	{ LSM303DLHC_ACCEL_DEV_NAME, LSM303DLHC },
-	{ LIS3DH_ACCEL_DEV_NAME, LIS3DH },
-	{ LSM330D_ACCEL_DEV_NAME, LSM330D },
-	{ LSM330DL_ACCEL_DEV_NAME, LSM330DL },
-	{ LSM330DLC_ACCEL_DEV_NAME, LSM330DLC },
-	{ LIS331DLH_ACCEL_DEV_NAME, LIS331DLH },
-	{ LSM303DL_ACCEL_DEV_NAME, LSM303DL },
-	{ LSM303DLM_ACCEL_DEV_NAME, LSM303DLM },
-	{ LSM330_ACCEL_DEV_NAME, LSM330 },
-	{ LSM303AGR_ACCEL_DEV_NAME, LSM303AGR },
-	{ LIS2DH12_ACCEL_DEV_NAME, LIS2DH12 },
-	{ LIS3L02DQ_ACCEL_DEV_NAME, LIS3L02DQ },
-	{ LNG2DM_ACCEL_DEV_NAME, LNG2DM },
-	{ H3LIS331DL_ACCEL_DEV_NAME, H3LIS331DL },
-	{ LIS331DL_ACCEL_DEV_NAME, LIS331DL },
-	{ LIS3LV02DL_ACCEL_DEV_NAME, LIS3LV02DL },
-	{ LIS2DW12_ACCEL_DEV_NAME, LIS2DW12 },
+	{ LSM303DLH_ACCEL_DEV_NAME },
+	{ LSM303DLHC_ACCEL_DEV_NAME },
+	{ LIS3DH_ACCEL_DEV_NAME },
+	{ LSM330D_ACCEL_DEV_NAME },
+	{ LSM330DL_ACCEL_DEV_NAME },
+	{ LSM330DLC_ACCEL_DEV_NAME },
+	{ LIS331DLH_ACCEL_DEV_NAME },
+	{ LSM303DL_ACCEL_DEV_NAME },
+	{ LSM303DLM_ACCEL_DEV_NAME },
+	{ LSM330_ACCEL_DEV_NAME },
+	{ LSM303AGR_ACCEL_DEV_NAME },
+	{ LIS2DH12_ACCEL_DEV_NAME },
+	{ LIS3L02DQ_ACCEL_DEV_NAME },
+	{ LNG2DM_ACCEL_DEV_NAME },
+	{ H3LIS331DL_ACCEL_DEV_NAME },
+	{ LIS331DL_ACCEL_DEV_NAME },
+	{ LIS3LV02DL_ACCEL_DEV_NAME },
+	{ LIS2DW12_ACCEL_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
 
-static int st_accel_i2c_probe(struct i2c_client *client,
-						const struct i2c_device_id *id)
+static int st_accel_i2c_probe(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev;
 	struct st_sensor_data *adata;
+	const char *match;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adata));
@@ -152,19 +152,9 @@ static int st_accel_i2c_probe(struct i2c_client *client,
 
 	adata = iio_priv(indio_dev);
 
-	if (client->dev.of_node) {
-		st_sensors_of_name_probe(&client->dev, st_accel_of_match,
-					 client->name, sizeof(client->name));
-	} else if (ACPI_HANDLE(&client->dev)) {
-		ret = st_sensors_match_acpi_device(&client->dev);
-		if ((ret < 0) || (ret >= ST_ACCEL_MAX))
-			return -ENODEV;
-
-		strlcpy(client->name, st_accel_id_table[ret].name,
-				sizeof(client->name));
-	} else if (!id)
-		return -ENODEV;
-
+	match = device_get_match_data(&client->dev);
+	if (match)
+		strlcpy(client->name, match, sizeof(client->name));
 
 	st_sensors_i2c_configure(indio_dev, client, adata);
 
@@ -188,7 +178,7 @@ static struct i2c_driver st_accel_driver = {
 		.of_match_table = of_match_ptr(st_accel_of_match),
 		.acpi_match_table = ACPI_PTR(st_accel_acpi_match),
 	},
-	.probe = st_accel_i2c_probe,
+	.probe_new = st_accel_i2c_probe,
 	.remove = st_accel_i2c_remove,
 	.id_table = st_accel_id_table,
 };
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 084638e4ddf2..4a754921fb6f 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -620,6 +620,16 @@ config ROCKCHIP_SARADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called rockchip_saradc.
 
+config SC27XX_ADC
+	tristate "Spreadtrum SC27xx series PMICs ADC"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	help
+	  Say yes here to build support for the integrated ADC inside the
+	  Spreadtrum SC27xx series PMICs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called sc27xx_adc.
+
 config SPEAR_ADC
 	tristate "ST SPEAr ADC"
 	depends on PLAT_SPEAR || COMPILE_TEST
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 28a9423997f3..03db7b578f9c 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
 obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o
 obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
+obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
 obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
 obj-$(CONFIG_STX104) += stx104.o
 obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index e02f7d1c86bc..d5ea84cf6460 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -1296,6 +1296,7 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
 {
 	struct at91_adc_state *st = iio_priv(indio_dev);
 	u32 cor = 0;
+	u16 tmp_val;
 	int ret;
 
 	/*
@@ -1309,7 +1310,8 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
 		mutex_lock(&st->lock);
 
 		ret = at91_adc_read_position(st, chan->channel,
-					     (u16 *)val);
+					     &tmp_val);
+		*val = tmp_val;
 		mutex_unlock(&st->lock);
 		iio_device_release_direct_mode(indio_dev);
 
@@ -1322,7 +1324,8 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
 		mutex_lock(&st->lock);
 
 		ret = at91_adc_read_pressure(st, chan->channel,
-					     (u16 *)val);
+					     &tmp_val);
+		*val = tmp_val;
 		mutex_unlock(&st->lock);
 		iio_device_release_direct_mode(indio_dev);
 
diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
index 9430b54121e0..36b59d8957fb 100644
--- a/drivers/iio/adc/hx711.c
+++ b/drivers/iio/adc/hx711.c
@@ -97,6 +97,14 @@ struct hx711_data {
 	 * 2x32-bit channel + 64-bit timestamp
 	 */
 	u32			buffer[4];
+	/*
+	 * delay after a rising edge on SCK until the data is ready DOUT
+	 * this is dependent on the hx711 where the datasheet tells a
+	 * maximum value of 100 ns
+	 * but also on potential parasitic capacities on the wiring
+	 */
+	u32			data_ready_delay_ns;
+	u32			clock_frequency;
 };
 
 static int hx711_cycle(struct hx711_data *hx711_data)
@@ -110,6 +118,14 @@ static int hx711_cycle(struct hx711_data *hx711_data)
 	 */
 	preempt_disable();
 	gpiod_set_value(hx711_data->gpiod_pd_sck, 1);
+
+	/*
+	 * wait until DOUT is ready
+	 * it turned out that parasitic capacities are extending the time
+	 * until DOUT has reached it's value
+	 */
+	ndelay(hx711_data->data_ready_delay_ns);
+
 	val = gpiod_get_value(hx711_data->gpiod_dout);
 	/*
 	 * here we are not waiting for 0.2 us as suggested by the datasheet,
@@ -120,6 +136,12 @@ static int hx711_cycle(struct hx711_data *hx711_data)
 	gpiod_set_value(hx711_data->gpiod_pd_sck, 0);
 	preempt_enable();
 
+	/*
+	 * make it a square wave for addressing cases with capacitance on
+	 * PC_SCK
+	 */
+	ndelay(hx711_data->data_ready_delay_ns);
+
 	return val;
 }
 
@@ -458,6 +480,7 @@ static const struct iio_chan_spec hx711_chan_spec[] = {
 static int hx711_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
 	struct hx711_data *hx711_data;
 	struct iio_dev *indio_dev;
 	int ret;
@@ -530,6 +553,22 @@ static int hx711_probe(struct platform_device *pdev)
 	hx711_data->gain_set = 128;
 	hx711_data->gain_chan_a = 128;
 
+	hx711_data->clock_frequency = 400000;
+	ret = of_property_read_u32(np, "clock-frequency",
+					&hx711_data->clock_frequency);
+
+	/*
+	 * datasheet says the high level of PD_SCK has a maximum duration
+	 * of 50 microseconds
+	 */
+	if (hx711_data->clock_frequency < 20000) {
+		dev_warn(dev, "clock-frequency too low - assuming 400 kHz\n");
+		hx711_data->clock_frequency = 400000;
+	}
+
+	hx711_data->data_ready_delay_ns =
+				1000000000 / hx711_data->clock_frequency;
+
 	platform_set_drvdata(pdev, indio_dev);
 
 	indio_dev->name = "hx711";
diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index 0635a79864bf..d1239624187d 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/regmap.h>
+#include <linux/sched/task.h>
 #include <linux/util_macros.h>
 
 #include <linux/platform_data/ina2xx.h>
@@ -826,6 +827,7 @@ static int ina2xx_buffer_enable(struct iio_dev *indio_dev)
 {
 	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
 	unsigned int sampling_us = SAMPLING_PERIOD(chip);
+	struct task_struct *task;
 
 	dev_dbg(&indio_dev->dev, "Enabling buffer w/ scan_mask %02x, freq = %d, avg =%u\n",
 		(unsigned int)(*indio_dev->active_scan_mask),
@@ -835,11 +837,17 @@ static int ina2xx_buffer_enable(struct iio_dev *indio_dev)
 	dev_dbg(&indio_dev->dev, "Async readout mode: %d\n",
 		chip->allow_async_readout);
 
-	chip->task = kthread_run(ina2xx_capture_thread, (void *)indio_dev,
-				 "%s:%d-%uus", indio_dev->name, indio_dev->id,
-				 sampling_us);
+	task = kthread_create(ina2xx_capture_thread, (void *)indio_dev,
+			      "%s:%d-%uus", indio_dev->name, indio_dev->id,
+			      sampling_us);
+	if (IS_ERR(task))
+		return PTR_ERR(task);
+
+	get_task_struct(task);
+	wake_up_process(task);
+	chip->task = task;
 
-	return PTR_ERR_OR_ZERO(chip->task);
+	return 0;
 }
 
 static int ina2xx_buffer_disable(struct iio_dev *indio_dev)
@@ -848,6 +856,7 @@ static int ina2xx_buffer_disable(struct iio_dev *indio_dev)
 
 	if (chip->task) {
 		kthread_stop(chip->task);
+		put_task_struct(chip->task);
 		chip->task = NULL;
 	}
 
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index 7fb4f525714a..a8d35aebee80 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -1577,7 +1577,6 @@ static int max1363_probe(struct i2c_client *client,
 	struct max1363_state *st;
 	struct iio_dev *indio_dev;
 	struct regulator *vref;
-	const struct of_device_id *match;
 
 	indio_dev = devm_iio_device_alloc(&client->dev,
 					  sizeof(struct max1363_state));
@@ -1604,11 +1603,8 @@ static int max1363_probe(struct i2c_client *client,
 	/* this is only used for device removal purposes */
 	i2c_set_clientdata(client, indio_dev);
 
-	match = of_match_device(of_match_ptr(max1363_of_match),
-				&client->dev);
-	if (match)
-		st->chip_info = of_device_get_match_data(&client->dev);
-	else
+	st->chip_info = of_device_get_match_data(&client->dev);
+	if (!st->chip_info)
 		st->chip_info = &max1363_chip_info_tbl[id->driver_data];
 	st->client = client;
 
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 2948909f3ee3..da2d16dfa63e 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -922,6 +922,11 @@ static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = {
 	.name = "meson-meson8b-saradc",
 };
 
+static const struct meson_sar_adc_data meson_sar_adc_meson8m2_data = {
+	.param = &meson_sar_adc_meson8_param,
+	.name = "meson-meson8m2-saradc",
+};
+
 static const struct meson_sar_adc_data meson_sar_adc_gxbb_data = {
 	.param = &meson_sar_adc_gxbb_param,
 	.name = "meson-gxbb-saradc",
@@ -952,6 +957,10 @@ static const struct of_device_id meson_sar_adc_of_match[] = {
 		.data = &meson_sar_adc_meson8b_data,
 	},
 	{
+		.compatible = "amlogic,meson8m2-saradc",
+		.data = &meson_sar_adc_meson8m2_data,
+	},
+	{
 		.compatible = "amlogic,meson-gxbb-saradc",
 		.data = &meson_sar_adc_gxbb_data,
 	}, {
diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_a