Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd

Pull MFD changes from Lee Jones:
 "New drivers
   - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and
     Battery Charger
   - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM
     Generator

  Existing driver adaptions
   - Expansion of Wolfson Arizona DSP and High-Pass filter controls
   - TI TWL6040 default Regmap support and Regcache addition/bypass
   - Some nice Smatch catch fixes
   - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
   - ChromeOS EC timing (delay) adaptions and added dependency on OF
   - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}'
   - Watchdog support added for NVIDIA AS3722
   - Convert functions to static in TI AM335x
   - Realigned previously defeated functionality in TI AM335x
   - IIO ADC-TSC concurrency dead-lock/timeout resolution
   - Addition of Power Management and Clock support for Samsung core
   - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
   - Greater use of irqdomain functionality in ST-E AB8500
   - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
   - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
   - Device Tree documentation added for TI/Nat Semi LP3943
   - Version detection and voltage tables for TI TPS6586x PMIC devices
   - Simplification of Freescale MC13XXX (de-)initialisation routines
   - Clean-up and simplification of the Realtek parent driver
   - Added support for RTL8402 Realtek PCI-Express card reader
   - Resource leak fix for Maxim 77686
   - Possible suspend BUG() fix in OMAP USB TLL
   - Support for new Wolfson WM5110 Revision (D)
   - Testing of automatic assignment of of_node in mfd_add_device()
   - Reversion of the above when it started to cause issues
   - Remove legacy Platform Data from;
              TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
   - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL'
              removal, unused uninitialised warning mitigation, error
              message clarity, removal of redundant/duplicate checks,
              licensing (GPL -> GPL2), coding consistency, duplicate
              function declaration, ret checks, commit corrections,
              redundant of_match_ptr() helper removal, spelling,
              #if-deffery removal and header guards name changes"

* tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits)
  mfd: wm5110: Add register patch for rev D chip
  mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()
  gpio: lp3943: Remove redundant of_match_ptr helper
  mfd: sta2x11-mfd: Use named constants for pci_power_t values
  Documentation: mfd: Fix LDO index in s2mps11.txt
  mfd: Cleanup mfd-mcp-sa11x0.h header
  mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.
  mfd: twl6030: Fix endianness problem in IRQ handler
  mfd: sec-core: Add cells for S5M8767-clocks
  mfd: max14577: Remove redundant of_match_ptr helper
  mfd: twl6040: Fix sparse non static symbol warning
  mfd: Revert "mfd: Always assign of_node in mfd_add_device()"
  mfd: rtsx: Fix sparse non static symbol warning
  mfd: max77693: Set proper maximum register for MUIC regmap
  mfd: max77686: Fix regmap resource leak on driver remove
  mfd: Represent correct filenames in file headers
  mfd: rtsx: Add support for card reader rtl8402
  mfd: rtsx: Add set pull control macro and simplify rtl8411
  mfd: max8997: Enforce mfd_add_devices() return value check
  mfd: mc13xxx: Simplify probe() & remove()
  ...

106 files changed, 2343 insertions, 653 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
new file mode 100644
index 000000000000..80fcb7d70e13
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
@@ -0,0 +1,37 @@
+TI/National Semiconductor LP3943 GPIO controller
+
+Required properties:
+  - compatible: "ti,lp3943-gpio"
+  - gpio-controller: Marks the device node as a GPIO controller.
+  - #gpio-cells: Should be 2. See gpio.txt in this directory for a
+                 description of the cells format.
+
+Example:
+Simple LED controls with LP3943 GPIO controller
+
+&i2c4 {
+	lp3943@60 {
+		compatible = "ti,lp3943";
+		reg = <0x60>;
+
+		gpioex: gpio {
+			compatible = "ti,lp3943-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+leds {
+	compatible = "gpio-leds";
+	indicator1 {
+		label = "indi1";
+		gpios = <&gpioex 9 GPIO_ACTIVE_LOW>;
+	};
+
+	indicator2 {
+		label = "indi2";
+		gpios = <&gpioex 10 GPIO_ACTIVE_LOW>;
+		default-state = "off";
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
index 5f229c5f6da9..8009c3d87f33 100644
--- a/Documentation/devicetree/bindings/mfd/cros-ec.txt
+++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt
@@ -17,6 +17,15 @@ Required properties (SPI):
 - compatible: "google,cros-ec-spi"
 - reg: SPI chip select
 
+Optional properties (SPI):
+- google,cros-ec-spi-msg-delay: Some implementations of the EC require some
+  additional processing time in order to accept new transactions. If the delay
+  between transactions is not long enough the EC may not be able to respond
+  properly to subsequent transactions and cause them to hang. This property
+  specifies the delay, in usecs, introduced between transactions to account
+  for the time required by the EC to get back into a state in which new data
+  can be accepted.
+
 Required properties (LPC):
 - compatible: "google,cros-ec-lpc"
 - reg: List of (IO address, size) pairs defining the interface uses
diff --git a/Documentation/devicetree/bindings/mfd/lp3943.txt b/Documentation/devicetree/bindings/mfd/lp3943.txt
new file mode 100644
index 000000000000..e8591d6b11b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lp3943.txt
@@ -0,0 +1,33 @@
+TI/National Semiconductor LP3943 MFD driver
+
+Required properties:
+  - compatible: "ti,lp3943"
+  - reg: I2C slave address. From 0x60 to 0x67.
+
+LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm.
+
+For the LP3943 GPIO properties please refer to:
+Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
+
+For the LP3943 PWM properties please refer to:
+Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
+
+Example:
+
+lp3943@60 {
+	compatible = "ti,lp3943";
+	reg = <0x60>;
+
+	gpioex: gpio {
+		compatible = "ti,lp3943-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pwm3943: pwm {
+		compatible = "ti,lp3943-pwm";
+		#pwm-cells = <2>;
+		ti,pwm0 = <8 9 10>;
+		ti,pwm1 = <15>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index 78a840d7510d..15ee89c3cc7b 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -60,7 +60,7 @@ as per the datasheet of s2mps11.
 
 	- LDOn
 		  - valid values for n are 1 to 38
-		  - Example: LDO0, LD01, LDO28
+		  - Example: LDO1, LD02, LDO28
 	- BUCKn
 		  - valid values for n are 1 to 10.
 		  - Example: BUCK1, BUCK2, BUCK9
diff --git a/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
new file mode 100644
index 000000000000..7bd9d3b12ce1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
@@ -0,0 +1,58 @@
+TI/National Semiconductor LP3943 PWM controller
+
+Required properties:
+  - compatible: "ti,lp3943-pwm"
+  - #pwm-cells: Should be 2. See pwm.txt in this directory for a
+                description of the cells format.
+                Note that this hardware limits the period length to the
+                range 6250~1600000.
+  - ti,pwm0 or ti,pwm1: Output pin number(s) for PWM channel 0 or 1.
+    0 = output 0
+    1 = output 1
+    .
+    .
+    15 = output 15
+
+Example:
+PWM 0 is for RGB LED brightness control
+PWM 1 is for brightness control of LP8557 backlight device
+
+&i2c3 {
+	lp3943@60 {
+		compatible = "ti,lp3943";
+		reg = <0x60>;
+
+		/*
+		 * PWM 0 : output 8, 9 and 10
+		 * PWM 1 : output 15
+		 */
+		pwm3943: pwm {
+			compatible = "ti,lp3943-pwm";
+			#pwm-cells = <2>;
+			ti,pwm0 = <8 9 10>;
+			ti,pwm1 = <15>;
+		};
+	};
+
+};
+
+/* LEDs control with PWM 0 of LP3943 */
+pwmleds {
+	compatible = "pwm-leds";
+	rgb {
+		label = "indi::rgb";
+		pwms = <&pwm3943 0 10000>;
+		max-brightness = <255>;
+	};
+};
+
+&i2c4 {
+	/* Backlight control with PWM 1 of LP3943 */
+	backlight@2c {
+		compatible = "ti,lp8557";
+		reg = <0x2c>;
+
+		pwms = <&pwm3943 1 10000>;
+		pwm-names = "lp8557";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index d5c9bca01232..cbe89ff10686 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -268,8 +268,8 @@
 					reg = <3>;
 					regulator-compatible = "sm2";
 					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 				};
 
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 25ce03eff6ab..50cc557abe41 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -406,6 +406,14 @@ config GPIO_ARIZONA
 	help
 	  Support for GPIOs on Wolfson Arizona class devices.
 
+config GPIO_LP3943
+	tristate "TI/National Semiconductor LP3943 GPIO expander"
+	depends on MFD_LP3943
+	help
+	  GPIO driver for LP3943 MFD.
+	  LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
+	  Open drain outputs are required for this usage.
+
 config GPIO_MAX7300
 	tristate "Maxim MAX7300 GPIO expander"
 	depends on I2C
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index c44fffac9519..0248471402e4 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
 obj-$(CONFIG_GPIO_KEMPLD)	+= gpio-kempld.o
 obj-$(CONFIG_ARCH_KS8695)	+= gpio-ks8695.o
 obj-$(CONFIG_GPIO_INTEL_MID)	+= gpio-intel-mid.o
+obj-$(CONFIG_GPIO_LP3943)	+= gpio-lp3943.o
 obj-$(CONFIG_ARCH_LPC32XX)	+= gpio-lpc32xx.o
 obj-$(CONFIG_GPIO_LYNXPOINT)	+= gpio-lynxpoint.o