| Age | Commit message (Collapse) | Author |
|---|
|
Problem: winfixbuf does not allow to re-edit current buffer
(Tim Pope, after v9.1.0147)
Solution: Explicitly allow :e even when 'winfixbuf' is set,
since it just re-loads the current buffer
(Colin Kennedy)
fixes: #14237
closes: #14286
Signed-off-by: Colin Kennedy <colinvfx@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: No autocommand when writing session file
Solution: Add SessionWritePost autocommand
(Colin Kennedy)
fixes: ##14242
closes: #14288
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Colin Kennedy <colinvfx@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: unused display_text_first boolean var in win_line()
Solution: Remove unused display_text_first boolean variable
(Dylan Thacker-Smith)
The only place it is used, uses its initial constant value, then the
following conditionally values set to the variable are unused.
Specifically, it was commit 234c3fab28c14846b962c90097496b27ee1b4df8
that changed the use of display_text_first such that it doesn't have any
effect.
closes: #14305
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cannot use modifiers before :-Ntabmove.
Solution: Check backwards from the command instead of checking from the
start of the command line. Slightly adjust docs to make them
more consistent (zeertzjq).
closes: #14289
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Backspace inserts spaces with virtual text and 'smarttab'.
Solution: Ignore virtual text and wrapping when backspacing.
(zeertzjq)
related: neovim/neovim#28005
closes: #14296
Co-authored-by: VanaIgr <vanaigranov@gmail.com>
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: build-error on GNU HURD
Solution: Define _XOPEN_SOURCE like for Android and Cygwin
(James McCoy)
strptime() requires _XOPEN_SOURCE to be defined for its declaration to
be visible. This is already done for non-Android Linux and Cygwin, but
also needs to be exposed for GNU/Hurd.
closes: #14285
Signed-off-by: James McCoy <jamessan@jamessan.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: leaking memory in add_user() (LuMingYinDetect)
Solution: free user_copy pointer instead of the user ptr
add_user() is called with a user pointer and the user pointer comes
from these functions:
- return value from the getpwent() function (Unix).
- return value from the getpwnam() function (Unix).
- return value from the NetUserEnum() function (MS Windows).
For the first 2 callers, the man page for those functions directly says,
one should not free the returned pointer (since it comes from static
memory).
For the third caller (on MS Windows), the returned buffer is already
freed directly after calling the add_user() function in
NetApiBufferFree(), so this would lead to a double free().
This all indicates, the user ptr is wrongly freed in the add_user()
function and the intention was to free the user_copy pointer instead in
case of an error.
So let's just use that now.
fixes: #14250
closes: #14260
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: `gM` would include outer virtual text and its padding when
getting the line length used to calculate the middle of the
line, putting the cursor much closer to virtual text lines.
Solution: Exclude outer virtual text in getting the line length for
`gM`, so that virtual text doesn't influence where the cursor
is moved to (Dylan Thacker-Smith).
closes: #14262
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: `gj`/`gk` was updating the desired cursor virtual column to
the outer virtual text, even though the actual cursor position
was moved to not be on the virtual text, leading the need to
do an extra `gj`/`gk` to move past each virtual text line.
(rickhowe)
Solution: Exclude the outer virtual text when getting the line length
for moving the cursor with `gj`/`gk`, so that no extra
movement is needed to skip over virtual text lines.
(Dylan Thacker-Smith)
fixes: #12028
related: #14262
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Not enough tests for the slice() function.
Solution: Test with multibyte chars, and in both Legacy and Vim9 script.
Update docs to be clearer about how it treats composing chars.
(zeertzjq)
closes: #14275
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: compound operators broken for lambdas in an object
(girishji)
Solution: When using an object from the outer scope, use the LOADOUTER
instruction to load the object (Yegappan Lakshmanan).
fixes: #14236
closes: #14266
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: problem evaluating negated boolean logic
(lxhillwind)
Solution: Don't clear the first value on short circuit evaluation
(Yegappan Lakshmanan)
fixes: #14265
closes: #14269
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: filetype: support for gnuplot files is lacking
Solution: Also detect *.gnuplot files
(RobbiZ98)
closes: #14243
Signed-off-by: RobbiZ98 <113035863+RobbiZ98@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: memleak with ex_drop(), NULL dereference
(zeertzjq)
Solution: revert back to ex_rewind(), use curbuf instead of buf
fixes: #14246
closes: #14251
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: gcc complains about uninitialized var
(Tony Mechelynck)
Solution: initialize to NULL
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: May leak memory in completion when ga_grow() fails.
Solution: Free "wca" when ga_grow() fails (zeertzjq).
fixes: #14248
closes: #14249
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: :drop tries to :rewind the argumentlist, which results in E37
(after v9.1.0046)
Solution: instead of calling ex_rewind(), call open_buffer() only when
re-using the initial empty buffer
fixes: #14219
closes: #14220
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Installer does not remove all files
Solution: Update installer and delete all files on uninstall
update Sodium library dependency, update Readme
(RestorerZ)
closes: #14214
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: complete_info() returns wrong order of items
(after v9.0.2018)
Solution: Revert Patch v9.0.2018
(Girish Palya)
bug fix: complete_info() gives wrong results
1) complete_info() reverses list of items during <c-p>
2) 'selected' item index is wrong during <c-p>
3) number of items returnd can be wrong
Solution:
- Decouple 'cp_number' from 'selected' index since they need not be
correlated
- Do not iterate the list backwards
- Add targeted tests
Regression introduced by https://github.com/vim/vim/commit/69fb5afb3bc9da24c2fb0eafb0027ba9c6502fc2
Following are unnecessary commits to patch problems from above:
https://github.com/vim/vim/commit/fef66301665027f1801a18d796f74584666f41ef
https://github.com/vim/vim/commit/daef8c74375141974d61b85199b383017644978c
All the tests from above commits are retained though.
fixes: #14204
closes: #14241
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Memory leak with "above" virtual text and 'relativenumber'.
Solution: Free "text_props" and "text_prop_idxs" before returning.
Also fix off-by-one error causing line number to be drawn
beyond end of window (zeertzjq).
fixes: #14239
closes: #14241
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vento files are not recognized.
Solution: Recognize *.vto files as filetype "vento" (wrapperup)
Vento is a templating engine https://vento.js.org/
closes: #14229
Signed-off-by: wrapperup <wrapperup4@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Dafny files are not recognized.
Solution: Recognize *.dfy files as filetype "dafny" (zeertzjq).
Ref: https://dafny.org/
Ref: https://github.com/mlr-msft/vim-loves-dafny
closes: #14226
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
and conceal
Problem: Wrong cursor position when clicking after end of line with
'rightleft', 'virtualedit' and conceal.
Solution: Set values in ScreenCols[] also with SLF_RIGHTLEFT. Also fix
off-by-one cursor position with 'colorcolumn' (zeertzjq).
closes: #14218
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
'nowrap'
Problem: 'wincolor' highlight missing with 'rightleft', "below" virtual
text and 'nowrap'.
Solution: Handle 'rightleft' in draw_screen_line() (zeertzjq).
closes: #14216
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cursor position wrong when clicking with conceal and wrap.
Solution: Use the virtual column of the last char for ScreenCols[] in
boguscols. Remove use of MAXCOL in ScreenCols[]. Rename
third argument of wlv_screen_line() to "clear_end" as that's
clearer what it does (zeertzjq).
related: 14192
closes: #14200
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Wrong display or screenpos() result when toggling diff mode.
Solution: Reset w_skipcol when disabling 'wrap'. Reset w_leftcol when
enabling 'wrap' (zeertzjq).
fixes: #14210
closes: #14211
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Can define function with invalid name inside 'formatexpr'.
Solution: Use goto instead of checking for did_emsg later.
(zeertzjq)
closes: #14209
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: no overflow check for string formatting
Solution: Check message formatting function for overflow.
(Chris van Willegen)
closes: #13799
Signed-off-by: Christ van Willegen <cvwillegen@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cursor pos wrong when double-width chars are concealed.
Solution: Advance one more virtual column for a double-width char.
Run some tests with both 'wrap' and 'nowrap' (zeertzjq).
closes: #14197
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: 'wincolor' highlight missing with "below" virtual text.
Solution: Subtract n_attr_skip from n_attr. Combine 'wincolor' with
other highlights when 'nowrap' is set. (zeertzjq)
closes: #14196
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: E1513 might be confusing
(Christoph Thoma)
Solution: reword error message, fix test to not
depend on the actual message
fixes: #14189
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Coverity reports dead code.
Solution: Remove the dead code. Also fix a mistake in ml_get_pos_len()
and update some comments (zeertzjq).
closes: #14189
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cursor column wrong with 'virtualedit' and conceal.
Solution: Correct cursor column at end of line if never reached.
(zeertzjq)
closes: #14190
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: winframe functions incorrectly recompute window positions if
the altframe wasn't adjacent to the closed frame, which is
possible if adjacent windows had 'winfix{width,height}' set.
Solution: recompute for windows within the parent of the altframe and
closed frame. Skip this (as before) if the altframe was
top/left, but only if adjacent to the closed frame, as
positions won't change in that case. Also correct the return
value documentation for win_screenpos. (Sean Dewar)
The issue revealed itself after removing the win_comp_pos call below
winframe_restore in win_splitmove. Similarly, wrong positions could result from
windows closed in other tabpages, as win_free_mem uses winframe_remove (at least
until it is entered later, where enter_tabpage calls win_comp_pos).
NOTE: As win_comp_pos handles only curtab, it's possible via other means for
positions in non-current tabpages to be wrong (e.g: after changing 'laststatus',
'showtabline', etc.). Given enter_tabpage recomputes it, maybe it's intentional
as an optimization? Should probably be documented in win_screenpos then, but I
won't address that here.
closes: #14191
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: 'cursorline' and 'wincolor' highlight missing with concealed and
wrapped lines.
Solution: Apply 'cursorline' and 'wincolor' highlight to boguscols.
(zeertzjq)
Since 'cursorline' and 'wincolor' highlight apply after the end of the
line, it is more consistent to have them also apply to boguscols.
Assigning MAXCOL to values in ScreenCols[] make mouse click behave the
same with 'cursorline' and 'nocursorline', but such behavior may be
incorrect, as it puts the cursor on the next screen line. That may be
fixed in a future PR.
closes: #14192
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: msgfmt ver. 0.22 forcibly converts text to UTF-8
Solution: use '--no-convert' if msgfmt supports it. Add a configure
check for the msgfmt version (RestorerZ).
closes: #14163
Co-authored-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: More code can use ml_get_buf_len() instead of STRLEN().
Solution: Change more STRLEN() calls to ml_get_buf_len(). Also do not
set ml_line_textlen in ml_replace_len() if "has_props" is set,
because "len_arg" also includes the size of text properties in
that case. (zeertzjq)
closes: #14183
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: small improvements can be made to split-move related
functions.
Solution: apply them (Sean Dewar):
- Improve some doc comments (frame_flatten should still work for non-current
tabpages, despite the topframe check, which looks benign, though I'm unsure if
it's still needed; see #2467).
- f_win_splitmove should check_split_disallowed on wp, not targetwin, as that's
what win_splitmove checks (though it's probably unnecessary to check
b_locked_split at all; see #14109, which I hope to get around to finishing at
some point).
- Make winframe_restore restore window positions for the altframe, which
winframe_remove changes. This doesn't affect the prior behaviour, as we called
win_comp_pos after, but as win_comp_pos only works for curtab, and
winframe_remove supports non-current tabpages, we should undo it. Regardless,
this should mean we don't need win_comp_pos anymore; adjust tests to check
that window positions remain unchanged.
I'm not sure win_comp_pos is needed after last_status anyway if it doesn't
steal rows from another frame to make room for a new statusline, which
shouldn't be the case after winframe_remove? To be safe, I'll leave it as is.
closes: #14185
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: more places exist where curwin == prevwin, and it may even be
expected in some cases.
Solution: revert v9.1.0001, but document that it's possible instead.
(Sean Dewar)
I've had a change of heart for the following reasons:
- A quick 'n dirty [GitHub code
search](https://github.com/search?q=%2F%28winnr%5C%28%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%7Cwinnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5C%29%29%2F&type=code)
reveals some cases where it's expected in the wild.
Particularly, it made me aware `winnr() == winnr('#')` is possible when curwin
is changed temporarily during the evaluation of a &statusline expression item
(`%{...}`), and is used to show something different on the statusline
belonging to the previous window; that behaviour wasn't changed in v9.1.0001,
but it means curwin == prevwin makes sense in some cases.
- The definition and call sites of back_to_prevwin imply some expectation that
prevwin == wp (== curwin) is possible, as it's used to skip entering the
prevwin in that case.
- Prior to v9.1.0001, `:wincmd p` would not beep in the case that was patched in
v9.1.0001, but now does. That resulted in #14047 being opened, as it affected
the CtrlP plugin.
I find it odd that `:wincmd p` had cases where it wouldn't beep despite doing
nothing, but it may be preferable to keep things that way (or instead also
beep if curwin == prevwin, if that's preferred).
- After more digging, I found cases in win_free_mem, enter_tabpage,
aucmd_restbuf and qf_open_new_cwindow where curwin == prevwin is possible
(many of them from autocommands). Others probably exist too, especially in
places where curwin is changed temporarily.
fixes: #14047
closes: #14186
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: current window number returned by tabpagewinnr may be outdated
when called from win_execute for the original tabpage.
Solution: update the original tabpage's tp_curwin in switch_win; use
{un}use_tabpage instead. Don't do it in restore_win to ensure
tp_curwin of the temporarily visited tabpage is unchanged from
switch_win visiting it, as before. (Sean Dewar)
Maybe restore_win should only restore tp_curwin if
`curtab == switchwin->sw_curtab`, in case the user changed tabpages from within
win_execute, but not doing that is consistent with the old behaviour.
related: #14186
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: too many STRLEN() calls
Solution: Make use of ml_get_len() calls instead
(John Marriott)
closes: #14123
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Changing buffer in another window using win_execute() causes
it to show matchparen (after 9.0.0969).
Solution: Delay highlighting with SafeState in BufWinEnter.
(zeertzjq)
closes: #14177
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Internal error with blockwise getregion() in another buffer
Solution: Also change curwin->w_buffer when changing curbuf (zeertzjq)
closes: #14179
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: Importing an autoload imported script fails
(Song-Tianxiang)
Solution: Return the script ID in this case
(Yegappan Lakshmanan)
fixes: #14171
closes: #14174
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Internal error or crash when passing invalid position to
getregion().
Solution: Give an error for invalid position (zeertzjq).
closes: #14172
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Calling STRLEN() to compute ml_line_textlen when not needed.
Solution: Use 0 when STRLEN() will be required and call STRLEN() later.
(zeertzjq)
closes: #14155
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: problem with writing extended attributes on failure
Solution: Change return type to ssize_t and check listxattr's return
value correctly on failure (Paul Tagliamonte)
The existing logic will return when the listxattr call returns with the
errno set to ENOTSUP (or a size of 0 bytes), without checking to see if
listxattr actually failed. listxattr can fail with at least E2BIG,
ENOTSUP, ERANGE, or anything that `stat(2)` can fail with (in my case;
ENOENT from stat).
The returned size is stored to a size_t, but the return type is a
ssize_t. On failure, listxattr returns -1, which will get translated to
size_t's MAX. If the listxattr call failed with anything other than
ENOTSUP, this triggers a request for size_t MAX bytes.
This means that, if the listxattr call fails with anything other than
ENOTSUP on save, vim will error with
`E342: Out of memory! (allocating 18446744073709551615 bytes)`
(keen observers will note 18446744073709551615 is 0xffffffffffffffff)
In reality, this is likely masking a different (usually filesystem?)
error -- but at least it's an error being pushed to the user now, and we
don't try to allocate size_t MAX bytes.
I've opted to change the type that we store listxattr to from size_t to
ssize_t, to match listxattr(2)'s signature, and to check for the -1
return value. Additionally, I've removed the errno check -- if we get a
listxattr failure for any reason, we may as well bail without trying;
it's not like we can even recover.
closes: #14169
Signed-off-by: Paul Tagliamonte <paultag@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: expand() removes a slash after an environment variable that
ends with a colon on Windows.
Solution: Check the correct char for a colon (zeertzjq)
closes: #14161
Note: Vim still removes the path-separator at the end, if another path separator
follows directly after it, e.g. on:
```
echo $FOO='/usr/'
echo expand('$FOO/bar') == '/usr/bar'
```
see:
,----[ misc1.c:1630 ]
| // if var[] ends in a path separator and tail[] starts
| // with it, skip a character
| if (after_pathsep(dst, dst + c)
| #if defined(BACKSLASH_IN_FILENAME) || defined(AMIGA)
| && (dst == save_dst || dst[-1] != ':')
| #endif
| && vim_ispathsep(*tail))
| ++tail;
`----
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
object method
Problem: Add support for using a class type of itself in an object
method (thinca)
Solution: Vim9: Add support for using a class type of itself in an
object method (Yegappan Lakshmanan)
fixes: #12369
closes: #14165
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Crash in WinClosed after BufUnload closes other windows
Solution: Don't trigger WinClosed if the buffer is NULL (zeertzjq)
Now win_close_othertab() doesn't trigger any autocommands if the buffer
is NULL, so remove the autocmd blocking above (which was added not long
ago in patch v9.0.0550) for consistency.
Also remove an unreachable close_last_window_tabpage() above:
- It is only reached if only_one_window() returns TRUE and last_window()
returns FALSE.
- If only_one_window() returns TRUE, there is only one tabpage.
- If there is only one tabpage and last_window() returns FALSE, the
one_window() in last_window() must return FALSE, and the ONE_WINDOW
in close_last_window_tabpage() must also be FALSE.
- So close_last_window_tabpage() doesn't do anything and returns FALSE.
Then the curtab != prev_curtab check also doesn't make much sense, and
the only_one_window() can be replaced with a check for popup and a call
to last_window() since this is a stricter check than only_one_window().
closes: #14166
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
