Age | Commit message (Collapse) | Author |
|
Problem: Patch 9.1.0296 causes too many issues
(Tony Mechelynck, @chdiza, CI)
Solution: Back out the change for now
Revert "patch 9.1.0296: regexp: engines do not handle case-folding well"
This reverts commit 7a27c108e0509f3255ebdcb6558e896c223e4d23 it causes
issues with syntax highlighting and breaks the FreeBSD and MacOS CI. It
needs more work.
fixes: #14487
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Regex engines do not handle case-folding well
Solution: Correctly calculate byte length of characters to skip
When the regexp engine compares two utf-8 codepoints case insensitively
it may match an adjacent character, because it assumes it can step over
as many bytes as the pattern contains.
This however is not necessarily true because of case-folding, a
multi-byte UTF-8 character can be considered equal to some single-byte
value.
Let's consider the pattern 'ſ' and the string 's'. When comparing and
ignoring case, the single character 's' matches, and since it matches
Vim will try to step over the match (by the amount of bytes of the
pattern), assuming that since it matches, the length of both strings is
the same.
However in that case, it should only step over the single byte
value 's' so by 1 byte and try to start matching after it again. So for the
backtracking engine we need to ensure:
- we try to match the correct length for the pattern and the text
- in case of a match, we step over it correctly
The same thing can happen for the NFA engine, when skipping to the next
character to test for a match. We are skipping over the regstart
pointer, however we do not consider the case that because of
case-folding we may need to adjust the number of bytes to skip over. So
this needs to be adjusted in find_match_text() as well.
A related issue turned out, when prog->match_text is actually empty. In
that case we should try to find the next match and skip this condition.
fixes: #14294
closes: #14433
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Logic to make sure cursor is in visible part of the screen after
scrolling the text with 'smoothscroll' is scattered, asymmetric
and contains bugs.
Solution: Adjust and create helper function for 'smoothscroll' cursor logic.
(Luuk van Baal)
closes: #14410
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Autocommand may change currect directory after :tcd and :lcd.
Solution: Also clear tp_localdir and w_localdir when using aucmd_win.
(zeertzjq)
closes: #14435
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Support for 'smoothscroll' in (half-)page scrolling
broke backward compatibility and can be made to work better.
(after v9.1.215)
Solution: Restore the previous cursor and end-of-buffer behavior for
half-page scrolling and improve 'smoothscroll' support.
(Luuk van Baal)
fixes: #14338
closes: #14377
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Finding autocmd events is inefficient
Solution: Use binary search to find events, cache last found events,
avoid use of strlen(), add SessionWritePost autocmd,
fix test_codestyle and avoid endless loop
(John Marriott)
closes: #14287
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: No enum support
Solution: Implement enums for Vim9 script
(Yegappan Lakshmanan)
closes: #14224
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
closes: #14316
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: `gj`/`gk` was updating the desired cursor virtual column to
the outer virtual text, even though the actual cursor position
was moved to not be on the virtual text, leading the need to
do an extra `gj`/`gk` to move past each virtual text line.
(rickhowe)
Solution: Exclude the outer virtual text when getting the line length
for moving the cursor with `gj`/`gk`, so that no extra
movement is needed to skip over virtual text lines.
(Dylan Thacker-Smith)
fixes: #12028
related: #14262
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cursor position wrong when clicking with conceal and wrap.
Solution: Use the virtual column of the last char for ScreenCols[] in
boguscols. Remove use of MAXCOL in ScreenCols[]. Rename
third argument of wlv_screen_line() to "clear_end" as that's
clearer what it does (zeertzjq).
related: 14192
closes: #14200
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: More code can use ml_get_buf_len() instead of STRLEN().
Solution: Change more STRLEN() calls to ml_get_buf_len(). Also do not
set ml_line_textlen in ml_replace_len() if "has_props" is set,
because "len_arg" also includes the size of text properties in
that case. (zeertzjq)
closes: #14183
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
object method
Problem: Add support for using a class type of itself in an object
method (thinca)
Solution: Vim9: Add support for using a class type of itself in an
object method (Yegappan Lakshmanan)
fixes: #12369
closes: #14165
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: can't call internal methods with objects
Solution: Add support for empty(), len() and string() function
calls for objects (Yegappan Lakshmanan)
closes: #14129
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cannot keep a buffer focused in a window
(Amit Levy)
Solution: Add the 'winfixbuf' window-local option
(Colin Kennedy)
fixes: #6445
closes: #13903
Signed-off-by: Colin Kennedy <colinvfx@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: [security]: autocmd cause use-after-free in set_curbuf()
(kawarimidoll)
Solution: check side-effect of BufLeave autocommand, when the number
of windows changed, close windows containing buffers that will
be wiped, if curbuf changed unexpectedly make sure b_nwindows
is decremented otherwise it cannot be wiped
set_curbuf() already makes some efforts to ensure the BufLeave
autocommands do not cause issues. However there are still 2 issues
that are not taken care of:
1) If a BufLeave autocommand opens a new window containing the same
buffer as that is going got be closed in close_buffer() a bit later,
we suddenly have another window open, containing a free'd buffer. So we
must check if the number of windows changed and if it does (and the
current buffer is going to be wiped (according to the 'bufhidden'
setting), let's immediately close all windows containing the current
buffer using close_windows()
2) If a BufLeave autocommand changes our current buffer (displays it in
the current window), buf->b_nwindow will be incremented. As part of
set_curbuf() we will however enter another buffer soon, which means, the
newly created curbuf will have b_nwindows still have set, even so the
buffer is no longer displayed in a window. This causes later problems,
because it will no longer be possible to wipe such a buffer. So just
before entering the final buffer, check if the curbuf changed when
calling the BufLeave autocommand and if it does (and curbuf is still
valid), decrement curbuf->b_nwindows.
Both issues can be verified using the provided test (however the second
issue only because such an impacted buffer won't be wiped, causing
futher issues in later tests).
fixes: #13839
closes: #14104
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: too many STRLEN calls when getting a memline
Solution: Optimize calls to STRLEN(), add a few functions in memline.c
that return the byte length instead of relying on STRLEN()
(John Marriott)
closes: #14052
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: infinite loop in win_update with 'smoothscroll' set when
window width is equal to textoff, or signed integer overflow
if smaller.
Solution: don't revalidate wp->w_skipcol in that case, as no buffer text
is being shown. (Sean Dewar)
Don't instead reset w_skipcol; that would lose the scroll position
within the line, which may be undesirable if the window is made wider
later.
Also include changes from the splitmove PR #14042 that I (in my infinite
Git wisdom) forgot to commit. This includes a change to
Test_window_split_no_room to ensure it doesn't fail for some screen
sizes.
Move Test_smoothscroll_in_zero_width_window to test_scroll_opt.vim, as
that file feels more appropriate.
closes: #14068
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: hard to get visual region using Vim script
Solution: Add getregion() Vim script function
(Shougo Matsushita, Jakub Łuczyński)
closes: #13998
closes: #11579
Co-authored-by: =?UTF-8?q?Jakub=20=C5=81uczy=C5=84ski?= <doubleloop@o2.pl>
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: saving and restoring all frames to split-move is overkill now
that WinNewPre is not fired when split-moving.
Solution: defer the flattening of frames until win_split_ins begins
reorganising them, and attempt to restore the layout by
undoing our changes. (Sean Dewar)
This also means we no longer must allocate.
related: #14042
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: win_split_ins has no check for E36 when moving an existing
window
Solution: check for room and fix the issues in f_win_splitmove()
(Sean Dewar)
win_split_ins has no check for E36 when moving an existing window,
allowing for layouts with many overlapping zero-sized windows to be
created (which may also cause drawing issues with tablines and such).
f_win_splitmove also has some bugs.
So check for room and fix the issues in f_win_splitmove. Handle failure
in the two relevant win_split_ins callers by restoring the original
layout, and factor the common logic into win_splitmove.
Don't check for room when opening an autocommand window, as it's a
temporary window that's rarely interacted with or drawn anyhow, and is
rather important for some autocommands.
Issues fixed in f_win_splitmove:
- Error if splitting is disallowed.
- Fix heap-use-after-frees if autocommands fired from switching to "targetwin"
close "wp" or "oldwin".
- Fix splitting the wrong window if autocommands fired from switching to
"targetwin" switch to a different window.
- Ensure -1 is returned for all errors.
Also handle allocation failure a bit earlier in make_snapshot (callers,
except win_splitmove, don't really care if a snapshot can't be made, so
just ignore the return value).
Note: Test_smoothscroll_in_zero_width_window failed after these changes with
E36, as it was using the previous behaviour to create a zero-width window.
I've fixed the test such that it fails with UBSAN as expected when v9.0.1367 is
reverted (and simplified it too).
related: #14042
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: duplicate code when cleaning undo stack
Solution: refactor undo cleanup into a single public function
related: #13928
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: 'breakindent' behaves inconsistently with 'list' and splits.
Solution: Use 'listchars' from the correct window and handle caching
properly. Move cheaper comparisons to the top.
(zeertzjq)
closes: #14008
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: The call to redraw_for_cursorline() in nv_mousescroll() is
unnecessary because redraw_for_cursorline() only sets redraw
type to UPD_VALID, and all code paths in do_mousescroll()
already set redraw type to at least UPD_VALID.
Solution: Remove call to redraw_for_cursorline() in nv_mousescroll().
(zeertzjq)
closes: #13979
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: did_set_breakat() should be in optionstr.c as 'breakat' is a
string option.
Solution: Move did_set_breakat() to optionstr.c.
(zeertzjq)
closes: #13958
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Need a diff() Vim script function
Solution: Add the diff() Vim script function using the
xdiff internal diff library, add support for
"unified" and "indices" mode.
(Yegappan Lakshmanan)
fixes: #4241
closes: #12321
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: GTK code can be improved
Solution: Improve GTK code for initial Wayland support
(lilydjwg)
related: #9639
Signed-off-by: lilydjwg <lilydjwg@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Recorded register cannot be translated using keytrans() when
it involves character search (iddqd505)
Solution: Record a K_IGNORE instead of a K_NOP (zeertzjq)
related: #13916
closes: #13925
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Autocmds triggered from opening the cmdwin (in win_split and
do_ecmd) can cause issues such as E199, as the current checks
are insufficient.
Solution: Commands executed from the cmdwin apply to the old curwin/buf,
so they should be kept in a "suspended" state; abort if
they've changed. Also abort if cmdwin/buf was tampered with,
and check that curwin is correct. Try to clean up the cmdwin
buffer (only if hidden and non-current to simplify things; the
same approach is used when closing cmdwin normally), and add a
beep. (Sean Dewar)
It'd be nice to also check that curwin was *really* created by win_split, as
autocommands can change curwin before it returns (so it can't be assumed to be
that of the split); for now, this means that the cmdwin may not be the botwin in
that case, which is probably OK.
closes: #12819
Signed-off-by: Sean Dewar <seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: too vague errors for 'listchars'/'fillchars'
Solution: Include the field name in error message.
(zeertzjq)
related: neovim/neovim#27050
closes: #13877
Co-authored-by: Cole Frankenhoff <cole.nhf@gmail.com>
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cannot use terminal alternate fonts (PMunch)
Solution: Support terminal alternate fonts using
CSI SGR 10-20 and t_CF code (PMunch)
Add support for alternate font highlighting
This adds support for alternate font highlighting using CSI SGR 10-20.
Few terminals currently support this, but with added tool support this
should improve over time. The change here is more or less taken from how
colors are configured and applied, but there might be some parts I
missed while implementing it. Changing fonts is done through the new
`:hi ctermfont` attribute which takes a number, 0 is the normal font, and
the numbers 1-9 select an "alternative" font. Which fonts are in use is
up to the terminal.
fixes: #13513
closes: #13537
Signed-off-by: PMunch <peterme@peterme.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim is missing a foreach() func
Solution: Implement foreach({expr1}, {expr2}) function,
which applies {expr2} for each item in {expr1}
without changing it (Ernie Rael)
closes: #12166
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: win32: Windows default font lacking (@clach04)
Solution: Improve default font (Ken Takata)
win32: Improve default font
Currently, Fixedsys is the default font on Windows.
It is not suitable for recent High DPI environments.
* Change the default font to Consolas.
* Allow to change the default font by the translation message. E.g.:
```
msgid "DefaultFontNameForWindows"
msgstr "Courier New"
```
fixes: #12919
closes: #13266
Signed-off-by: Ken Takata <kentkt@csc.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: cannot compile all methods in a class
Solution: Support compiling all the methods in a class using :defcompile
(Yegappan Lakshmanan)
closes: #13844
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: proto files need update
Solution: re-generate them
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: no support for const/final class/objects vars
Solution: Support final and const object and class variables
closes: #13655
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: builtin funcs may accept a non-value
Solution: Restrict builtin functions that accept `type`
This PR finishes off detection and prevention of using a type as a
value. It takes care of builtin functions. However there are some
builtin functions, that need to be able to handle types as well as
non-args: instanceof(), type(), typename(), string().
A "bit", FE_X, is added to funcentry_T; when set, the builtin function
can handle a type (class or type-alias) in addition to a value.
Noteworthy change: Discovered that in compile_call() the builtin add()
is compiled inline instead of calling the builtin. Had to add a check
there.
closes: #13688
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: can use type a func arg/return value
Solution: Check if using type as function argument or return value
closes: #13675
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: instanceof() should use varargs as second arg
Solution: Modify `instanceof()` to use varargs instead of list
Modify `instanceof()` to use varargs instead of list
Valid `instanceof()` arguments are `type`s. A `type` is not a value;
it cannot be added to a list.
This change is non-compatible with the current usage of instanceof;
but instanceof is relatively new and it's a trivial change.
fixes: #13421
closes: #13644
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: [security]: use-after-free in check_argument_type
Solution: Reset function type pointer when freeing the function type
list
function pointer fp->uf_func_type may point to the same memory, that was
allocated for fp->uf_type_list. However, when cleaning up a function
definition (e.g. because it was invalid), fp->uf_type_list will be
freed, but fp->uf_func_type may still point to the same (now) invalid
memory address.
So when freeing the fp->uf_type_list, check if fp->func_type points to
any of those types and if it does, reset the fp->uf_func_type pointer to
the t_func_any (default) type pointer
closes: #13652
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: can use typealias in an assignment
Solution: Generate errors when class/typealias involved in the rhs of an
assignment
closes: #13637
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Generate errors when class/typealias involved in assignment.
|
|
Problem: no support to build on OpenVMS
Solution: Add OpenVMS X86_64 platform port
closes: #13623
Co-authored-by: errael <errael@raelity.com>
Co-authored-by: K.Takata <kentkt@csc.jp>
Signed-off-by: Zoltan Arpadffy <zoltan.arpadffy@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Using int for errbuflen in option funcs
Solution: Use size_t for errbuflen in string option functions
Use size_t for errbuflen in string option functions
This started as size_t to int warning on Windows in
do_set_option_string(). Other option setting functions are using size_t
for errbuflen so I changed the type in the argument list and then chased
further compiler warnings into the string option functions in
optionstr.c changing ints to size_t as I went.
I also changed the type of os_errbuflen in optset_T to size_t and
updated related argument lists in optionstr.c, as well as updating
set_string_option() to also use size_t for errbuflen for consistency
with other string option setting functions.
closes: #13628
Signed-off-by: Mike Williams <mikew@globalgraphics.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: [security]: stack-buffer-overflow in option callback functions
Solution: pass size of errbuf down the call stack, use snprintf()
instead of sprintf()
We pass the error buffer down to the option callback functions, but in
some parts of the code, we simply use sprintf(buf) to write into the error
buffer, which can overflow.
So let's pass down the length of the error buffer and use sprintf(buf, size)
instead.
Reported by @henices, thanks!
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Overflow logic requires long long
Solution: Define vimlong_T data type to make life easier
for porters
closes: #13598
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: INT overflow logic can be simplified
Solution: introduce trim_to_int() function
closes: #13556
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: overflow detection not accurate when adding digits
Solution: Use a helper function
Use a helper function to better detect overflows before adding integer
digits to a long or an integer variable respectively. Signal the
overflow to the caller function.
closes: #13539
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Michael Henry <vim@drmikehenry.com>
Signed-off-by: Ernie Rael <errael@raelity.com>
|
|
Problem: several problems with type aliases
Solution: Check for more error conditions, add tests,
fix issues
Check for more error conditions and add additional tests
fixes #13434
fixes #13437
fixes #13438
closes #13441
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: No support for type aliases
Solution: Implement :type command
A type definition is giving a name to a type specification. This also known
type alias.
:type ListOfStrings = list<string>
The type alias can be used wherever a built-in type can be used. The type
alias name must start with an upper case character.
closes: #13407
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
|
|
Problem: possible to escape bracketed paste mode with Ctrl-C
Solution: Do not handle Ctrl-C specially when key_protocol
is in use, makes bracketed paste mode more robust
When a key protocol is in use Ctrl-C will be sent as an escape sequence,
but a raw Ctrl-C can be sent when pasting data. Pass this through, so
that a Ctrl-C can be pasted and won't result in exiting insert mode
(where the rest of the pasted keys can cause all kind of nasty
side-effects).
Many terminals will strip control characters in paste data (and xterm
will strip ^C since version 388), but this provides some defense in
depth if users change settings like xterm's allowPasteControls.
closes: #13398
Signed-off-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: crash with deferred function call and exception
Solution: Save and restore exception state
Crash when a deferred function is called after an exception and another
exception is thrown
closes: #13376
closes: #13377
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
|