Age | Commit message (Collapse) | Author |
|
Problem: There are two dense conditions with duplication that needs to
be kept in sync between the while loop break condition and the
condition to skip certain text properties.
Solution: Refactor the loop by moving while loop conditions into the
body of the while loop so they can be shared with skip
conditions. `break` and an `active` variable are used to
handle the outcome of these merged conditions.
(Dylan Thacker-Smith)
closes: #14307
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
text
Problem: When a line is truncated just before 'after'/'right' virtual
text and the line also has 'below' virtual text, then the
'below' virtual text would not be displayed, depending on the
order these text properties were added.
Solution: In the loop to make text properties active, skip instead of
break for 'after'/'right' virtual text properties that are
ignored due to truncation, so following 'below' text
properties can still be made active.
Similarly, a loop is needed to determine if a text property
follows at the end of the screen. (Dylan Thacker-Smith)
related: #14307
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
truncated
Problem: The if branch to set `text_prop_follows` was both checking if
it was at the end of the buffer text line or if it was at the
end of the screen line, but the former being true skipped
a guard condition in the latter to only consider 'below'
virtual text to follow. `text_prop_follows` being improperly
set caused it to skip a conditional block to break at the end
as well as one to move `ptr` to the end of the text line,
while repeated for each following line of the window.
Solution: Move the check for whether 'below' virtual text should follow
so it is also used when at the end of the buffer text line.
(Dylan Thacker-Smith)
fixes: #12213
related: #14307
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: unused display_text_first boolean var in win_line()
Solution: Remove unused display_text_first boolean variable
(Dylan Thacker-Smith)
The only place it is used, uses its initial constant value, then the
following conditionally values set to the variable are unused.
Specifically, it was commit 234c3fab28c14846b962c90097496b27ee1b4df8
that changed the use of display_text_first such that it doesn't have any
effect.
closes: #14305
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Memory leak with "above" virtual text and 'relativenumber'.
Solution: Free "text_props" and "text_prop_idxs" before returning.
Also fix off-by-one error causing line number to be drawn
beyond end of window (zeertzjq).
fixes: #14239
closes: #14241
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
and conceal
Problem: Wrong cursor position when clicking after end of line with
'rightleft', 'virtualedit' and conceal.
Solution: Set values in ScreenCols[] also with SLF_RIGHTLEFT. Also fix
off-by-one cursor position with 'colorcolumn' (zeertzjq).
closes: #14218
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
'nowrap'
Problem: 'wincolor' highlight missing with 'rightleft', "below" virtual
text and 'nowrap'.
Solution: Handle 'rightleft' in draw_screen_line() (zeertzjq).
closes: #14216
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cursor position wrong when clicking with conceal and wrap.
Solution: Use the virtual column of the last char for ScreenCols[] in
boguscols. Remove use of MAXCOL in ScreenCols[]. Rename
third argument of wlv_screen_line() to "clear_end" as that's
clearer what it does (zeertzjq).
related: 14192
closes: #14200
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cursor pos wrong when double-width chars are concealed.
Solution: Advance one more virtual column for a double-width char.
Run some tests with both 'wrap' and 'nowrap' (zeertzjq).
closes: #14197
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: 'wincolor' highlight missing with "below" virtual text.
Solution: Subtract n_attr_skip from n_attr. Combine 'wincolor' with
other highlights when 'nowrap' is set. (zeertzjq)
closes: #14196
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cursor column wrong with 'virtualedit' and conceal.
Solution: Correct cursor column at end of line if never reached.
(zeertzjq)
closes: #14190
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: 'cursorline' and 'wincolor' highlight missing with concealed and
wrapped lines.
Solution: Apply 'cursorline' and 'wincolor' highlight to boguscols.
(zeertzjq)
Since 'cursorline' and 'wincolor' highlight apply after the end of the
line, it is more consistent to have them also apply to boguscols.
Assigning MAXCOL to values in ScreenCols[] make mouse click behave the
same with 'cursorline' and 'nocursorline', but such behavior may be
incorrect, as it puts the cursor on the next screen line. That may be
fixed in a future PR.
closes: #14192
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: More code can use ml_get_buf_len() instead of STRLEN().
Solution: Change more STRLEN() calls to ml_get_buf_len(). Also do not
set ml_line_textlen in ml_replace_len() if "has_props" is set,
because "len_arg" also includes the size of text properties in
that case. (zeertzjq)
closes: #14183
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Virtual text with text_wrap 'wrap' was effectively being
truncated by a break conditional on the EOL list character
being added to the screen line. (BigPeet)
Solution: Remove the condition that was leading to the early break and
instead fix a similar but incorrectly written outer condition
that checks if there is more to add at the end of the screen
line. (Dylan Thacker-Smith)
Also, related:
- update comment in win_line()
- remove no longer necessary at_end_str variable in win_line()
fixes: #12725
closes: #14079
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: unused init of text_prop_idxs in win_line
Solution: Remove it, fix typo
(Dylan Thacker-Smith)
Later use of text_prop_idxs treats it as empty, incrementing
text_props_active as new elements are added to this array, so remove
this unused conditional initialization when text_props_active is 0.
closes: #14063
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Visual hl wrong when it ends before multibyte 'showbreak'.
(lacygoil)
Solution: Use vcol_sbr instead of adding n_extra.
(zeertzjq)
fixes: #11272
closes: #13996
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: LineNrAbove and LineNrBelow background wrong on wrapped lines.
Solution: Update number column also for wrapped part of a line.
(zeertzjq)
closes: #13974
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Things that temporarily change/restore curwin/buf (e.g:
win_execute, some autocmds) may break assumptions that
curwin/buf is the cmdwin when "cmdwin_type != 0", causing
issues.
Solution: Expose the cmdwin's real win/buf and check that instead. Also
try to ensure these variables are NULL if "cmdwin_type == 0",
allowing them to be used directly in most cases without
checking cmdwin_type. (Sean Dewar)
Alternatively, we could ban win_execute in the cmdwin and audit all places that
temporarily change/restore curwin/buf, but I didn't notice any problems arising
from allowing this (standard cmdwin restrictions still apply, so things that may
actually break the cmdwin are still forbidden).
closes: #12819
Signed-off-by: Sean Dewar <seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Wrong display when 'breakindentopt' contains "sbr" and
'showbreak' and 'nobreakindent' are set.
Solution: Always reset wlv->need_showbreak regardless of the values of
'breakindent' and 'showbreak', as they aren't checked when
setting wlv->need_showbreak (zeertzjq)
closes: #13785
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Visual selection isn't drawn with 'breakindent' when the line
doesn't fit in the window (Jaehwang Jung)
Solution: Adjust wlv->fromcol also for 'breakindent' (zeertzjq)
closes: #13767
closes: #13768
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: 'breakindent' is not drawn after diff filler lines.
Solution: Correct check for whether 'breakindent' should be drawn.
closes: #13624
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Text properties causes wrong line wrapping to be drawn.
Solution: Find the index of the last text property that inserts text.
closes: #13611
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: linebreak applies for leading whitespace
Solution: only apply linebreak, once we have found non-breakat chars in
the line
closes: #13228
closes: #13243
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: multispace wrong when scrolling horizontally
Solution: Update position in "multispace" or "leadmultispace" also in
skipped chars. Reorder conditions to be more consistent.
closes: #13145
closes: #13147
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
|
|
Problem: curswant wrong on click with 've' and 'wrap' set
Solution: Add w_leftcol to mouse click column.
closes: #13142
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
|
|
Problem: "below" virtual text doesn't work with 'rightleft'.
Solution: Use column from right border with 'rightleft'.
closes: #13071
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
|
|
Problem: Virtual text at a column causes 'breakindent' and 'showbreak'
to be missing (after patch 9.0.1124).
Solution: Add check for "tp_col" in another place where TP_FLAG_WRAP is
checked.
closes: #12769
closes: #13008
closes: #13010
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
|
|
Problem: Wrong display with "above" virtual text and 'linebreak' or
'breakindent' and 'showbreak'.
Solution: Exclude size of "above" virtual text when calculating them.
closes: #13000
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
|
|
Problem: 'linebreak' is incorrectly drawn after 'breakindent'.
Solution: Don't include 'breakindent' size when already after it.
closes: #12937
closes: #12940
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
|
|
Problem: Cursor position still wrong with 'showbreak' and virtual text
after last character or 'listchars' "eol".
Solution: Remove unnecessary w_wcol adjustment in curs_columns(). Also
fix first char of virtual text not shown at the start of a screen
line.
closes: #12478
closes: #12532
closes: #12904
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
|
|
Problem: Wrong display with wrapping virtual text or unprintable chars,
'showbreak' and 'smoothscroll'.
Solution: Don't skip cells taken by 'showbreak' in screen lines before
"w_skipcol". Combined "n_skip" and "skip_cells".
closes: #12597
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
|
|
Problem: Visual highlight not working with cursor at end of screen line
and 'showbreak'.
Solution: Only update "vcol_prev" when drawing buffer text.
closes: #12865
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
|
|
Problem: failing cursorline sign test
Solution: only reset char attr, if cursorline
option is not set
Unfortunately, commit dbeadf05b6a152e7d9c5cc23d9202057f8e99884 causes a
failure with the sign test Test_sign_cursor_position()
The root cause is, that resetting the character attribute will also
reset the existing cursor line highlighting and this breaks the test,
that expects the cursor line highlighting to overrule the sign line
highlighting.
So change the condition to reset the character attribute by making sure
that this only happens, if the 'cursorline' option is not active and the
cursor is not at the same line as the line to be drawn
closes: #12854
closes: #12859
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Text property highlight doesn't override a sign highlight over
a tab character
Solution: Let text_property override tab highlighting
This fixes a few problems of text properties:
- text property highlighting when override=true does not overwrite TAB
highlighting
- text property highlighting when override=true does not overwrite TAB
highlighting with :set list
- text property highlighting is used instead of sign highlight after
the actual text ends when signs are present with linehl is set
closes: #21584
closes: #21592
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: blockwise Visual highlight not working with virtual text
Solution: Reset the correct variable at the end of virtual selection and
Check for double-width char inside virtual text.
closes: #12606
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
|
|
Problem: Wrong cursor position when clicking after concealed text
with 'virtualedit'.
Solution: Store virtual columns in ScreenCols[] instead of text
columns, and always use coladvance() when clicking.
This also fixes incorrect curswant when clicking on a TAB, so now
Test_normal_click_on_ctrl_char() asserts the same results as the ones
before patch 9.0.0048.
closes: #12808
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
|
|
Problem: cursor position wrong when clicking on an unprintable char
Solution: Don't update prev_ptr when wlv.n_extra is not zero.
closes: #12664
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
|
|
Problem: Crash with overlong textprop above
Solution: Consider only positive padding
closes: #12665
closes: #12661
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Visual area not shown when using 'showbreak' and start of line is
not visible. (Jaehwang Jung)
Solution: Adjust "fromcol" for the space taken by 'showbreak'.
(closes #12514)
|
|
Problem: Using freed memory when 'foldcolumn' is set.
Solution: Save extra pointer to free it later. (closes #12492)
|
|
Problem: Stray character is visible if 'smoothscroll' marker is displayed
on top of a double-wide character.
Solution: When overwriting a double-width character with the 'smoothscroll'
marker clear the second half. (closes #12469)
|
|
Problem: Line pointer becomes invalid when using spell checking.
Solution: Call ml_get() at the right places. (Luuk van Baal, closes #12456)
|
|
Problem: Weird use of static variables for spell checking.
Solution: Move the variables to a structure and pass them from win_update()
to win_line(). (Luuk van Baal, closes #12448)
|
|
Problem: SpellCap highlight not always updated when needed.
Solution: Handle updating line below closed fold and other situations where
only part of the window is redrawn. (Luuk van Baal, closes #12428,
closes #12420)
|
|
Problem: Line number not displayed when using 'smoothscroll'.
Solution: Adjust condition for showing the line number. (closes #12333)
|
|
Problem: Crash when textprop has a very large "padding" value. (Yegappan
Lakshmanan)
Solution: Avoid the "after" count to go negative.
|
|
Problem: Virtual text truncation only works with Unicode 'encoding'.
Solution: Convert the ellipsis character to 'encoding' if needed. (Hirohito
Higashi, closes #12233)
|
|
Problem: Wrong text displayed when using both 'linebreak' and 'list'.
Solution: Only set "c_extra" to NUL when "p_extra" is not empty. (Hirohito
Higashi, closes #12065)
|
|
Problem: Relative line number not updated with virtual text above.
Solution: Adjust the row for the line number for virtual text above.
(closes #12004)
|
|
Problem: 'colorcolumn' highlight wrong with virtual text above.
Solution: Adjust column of 'colorcolumn' for text propertly. (closes #12004)
|