Age | Commit message (Collapse) | Author |
|
Problem: winframe functions incorrectly recompute window positions if
the altframe wasn't adjacent to the closed frame, which is
possible if adjacent windows had 'winfix{width,height}' set.
Solution: recompute for windows within the parent of the altframe and
closed frame. Skip this (as before) if the altframe was
top/left, but only if adjacent to the closed frame, as
positions won't change in that case. Also correct the return
value documentation for win_screenpos. (Sean Dewar)
The issue revealed itself after removing the win_comp_pos call below
winframe_restore in win_splitmove. Similarly, wrong positions could result from
windows closed in other tabpages, as win_free_mem uses winframe_remove (at least
until it is entered later, where enter_tabpage calls win_comp_pos).
NOTE: As win_comp_pos handles only curtab, it's possible via other means for
positions in non-current tabpages to be wrong (e.g: after changing 'laststatus',
'showtabline', etc.). Given enter_tabpage recomputes it, maybe it's intentional
as an optimization? Should probably be documented in win_screenpos then, but I
won't address that here.
closes: #14191
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Commit d9ebd46bd090c598adc82e6 changed the condition to
check if the clipboard is available from:
```
has('clipboard')
```
to
```
has('clipboard_working')
```
Assuming that is the more accurate test because even when clipboard
support is enabled at compile time it may not be actually working (e.g.
if no X11 environment is available, or when working on a remote server).
However it seems that condition does not evaluate to true, when the GUI
has not been started up yet (and there was no X11 Connection yet possible).
So let's just revert back the check to `has('clipboard')`, since that
has been proven to be working well enough.
related: #13809
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
related: #14173
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: more places exist where curwin == prevwin, and it may even be
expected in some cases.
Solution: revert v9.1.0001, but document that it's possible instead.
(Sean Dewar)
I've had a change of heart for the following reasons:
- A quick 'n dirty [GitHub code
search](https://github.com/search?q=%2F%28winnr%5C%28%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%7Cwinnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5C%29%29%2F&type=code)
reveals some cases where it's expected in the wild.
Particularly, it made me aware `winnr() == winnr('#')` is possible when curwin
is changed temporarily during the evaluation of a &statusline expression item
(`%{...}`), and is used to show something different on the statusline
belonging to the previous window; that behaviour wasn't changed in v9.1.0001,
but it means curwin == prevwin makes sense in some cases.
- The definition and call sites of back_to_prevwin imply some expectation that
prevwin == wp (== curwin) is possible, as it's used to skip entering the
prevwin in that case.
- Prior to v9.1.0001, `:wincmd p` would not beep in the case that was patched in
v9.1.0001, but now does. That resulted in #14047 being opened, as it affected
the CtrlP plugin.
I find it odd that `:wincmd p` had cases where it wouldn't beep despite doing
nothing, but it may be preferable to keep things that way (or instead also
beep if curwin == prevwin, if that's preferred).
- After more digging, I found cases in win_free_mem, enter_tabpage,
aucmd_restbuf and qf_open_new_cwindow where curwin == prevwin is possible
(many of them from autocommands). Others probably exist too, especially in
places where curwin is changed temporarily.
fixes: #14047
closes: #14186
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
- Limit blob literals to an even number of hexadecimal digits and
correctly located dots.
- Match octal numbers.
The current version unsuccessfully attempts to match a leading '-' as
part of the float literal. It's actually parsed as part of the literal
for all numbers but the syntax file hasn't matched it like that for a
long time and highlights negative numbers as UNARY-MINUS NUMBER. This
will be fixed when better expression matching is implemented.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Changing buffer in another window using win_execute() causes
it to show matchparen (after 9.0.0969).
Solution: Delay highlighting with SafeState in BufWinEnter.
(zeertzjq)
closes: #14177
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Rimas Kudelis <rimas@kudelis.lt>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
- Make it not sound like a buffer option.
- "!" is called a modifier, not an option.
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
fixes: #14168
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Stančikas (#14118)
This translation has been available for free download from lietuvybe.org,
then lietuvybe.akl.lt, then lietuvybė.lt since at least 2006[1], but noone
ever bothered to contribute it upstream.
[1] https://web.archive.org/web/20060222162117/http://lietuvybe.org/files/vim-tutor-lt.txt
Co-authored-by: Laurynas Stančikas <lasas@gim.ktu.lt>
Signed-off-by: Rimas Kudelis <rimas@kudelis.lt>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
As this is encouraged in the referenced JEPs, "to visually
distinguish a string template from a string literal, and
a text block template from a text block", the default
colours for java\%[Debug]StrTempl are made distinct from
java\%[Debug]String.
According to §3.2 Lexical Translations (JLS, c. 1996 or any
more recent version), line terminators, white space, and
comments are discarded before tokens are accepted. Since
a template expression comprises a template processor, a dot,
and a template, it may be visually appealing to break up
its head across a few lines whenever its tail already spans
multiple lines. Curiously, no allowance for it is made in
the distributed tests for OpenJDK 21; the proposed regexp
patterns take in consideration a line terminator and white
space after a dot.
References:
https://openjdk.org/jeps/430 (Preview)
https://openjdk.org/jeps/459 (Second Preview)
https://openjdk.org/jeps/465
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Improve :map command highlighting.
- Fix multiline RHS matching, allow continued lines and comments.
- Allow ^V-escaped whitespace in LHS.
- Handle map-bar properly and allow trailing commands.
Fixes issue #12672.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
(#14162)
Improve :menu and :menutranslate highlighting.
- Match args to :menutranslation and :popup.
- Only highlight special notation in {rhs} of :menu, like :map.
- Allow line continuations in {rhs} of :menu and between {english} and
{mylang} of :menutranslation, matching common usage.
- Bug fixes.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Duplicate assignment in f_getregion().
Solution: Remove the duplicate assignment. Also improve getregion()
docs wording and fix an unrelated typo (zeertzjq)
closes: #14154
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
related: #14138
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: can only call getregion() for current buffer
Solution: Allow to retrieve selections from different buffers
(Shougo Matsushita)
closes: #14131
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: shm=F not respected when reloading buffer with 'autoread'
Solution: Check SHM_FILEINFO in buf_check_timestamp()
(Shougo Matsushita)
closes: #14144
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: several minor 'winfixbuf' issues exist, mostly relating to the
quickfix list
Solution: address them and adjust tests. Retab and reflow a few things too.
(Sean Dewar)
Things touched include:
- Replace the semsgs with gettext'd emsgs.
- Handle window switching in ex_listdo properly, so curbuf and curwin
are kept in-sync and trigger autocommands; handle those properly.
- Don't change the list entry index in qf_jump_edit_buffer if we fail
due to 'wfb' (achieved by returning FAIL; QF_ABORT should only be used
if the list was changed).
- Make qf_jump_edit_buffer actually switch to prevwin when using `:cXX`
commands **outside** of the list window if 'wfb' is set in curwin.
Handle autocommands properly in case they mess with the list.
NOTE: previously, it seemed to split if 'wfb' was set, but do nothing
and fail if prevwin is *valid*. This behaviour seemed strange, and maybe
unintentional? Now it aligns more with what's described for the `:cXX`
commands in the original PR description when used outside a list window,
I think.
- In both functions, only consider prevwin if 'wfb' isn't set for it;
fallback to splitting otherwise.
- Use win_split to split. Not sure if there was a specific reason for
using ex_splitview. win_split is simpler and respects modifiers like
:vertical that may have been used. Plus, its return value can be checked
for setting opened_window in qf code (technically win_split_ins autocmds
could immediately close it or change windows, in which the qf code might
close some other window on failure; it's already the case elsewhere,
though).
closes: #14142
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
`__inline` is recognized by GCC, and may even be preferred, as MSVC does
not recognize `__inline__`.
Signed-off-by: Wu Yongwei <wuyongwei@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
* runtime(vim): Update base-syntax, fix escaping :syn and :hi sub-groups
- Remove contained :syntax and :highlight sub-groups from the function
body cluster. These should only match in the respective commands.
- Remove vimSynLine syntax group from several clusters. The definition
of vimSynLine was removed in Vim 5.3.
* runtime(vim): Update syntax generator, use standard Last Change date format
The de facto standard date format is YYYY MMM DD.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Allow the opening parenthesis of a multiline array assignment, within an
if statement, to appear at EOL.
Fixes issue #962.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Jay Sitter <jay@jaysitter.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Fix incorrect error highlighting for function calls in :command
definitions. vimFunctionError should be restricted to :function header
lines.
fixes: #14135
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
- Explicitly match the bang and group name in :aug! {name}.
- Allow any characters in a group name.
- Match default group switch marker, END.
- Match :aug without arguments (list command).
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
* Use unnamed register while clipboard not exist
* Do not need to specify the unnamed register explicitly
fixes: #13809
Signed-off-by: Shixian Li <lsx7@sina.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: can't call internal methods with objects
Solution: Add support for empty(), len() and string() function
calls for objects (Yegappan Lakshmanan)
closes: #14129
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cannot keep a buffer focused in a window
(Amit Levy)
Solution: Add the 'winfixbuf' window-local option
(Colin Kennedy)
fixes: #6445
closes: #13903
Signed-off-by: Colin Kennedy <colinvfx@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Also, accept as valid the space escape sequence `\s`.
Also, consistently use the claimed `javaDebug` prefix for
syntax group definitions kept under `g:java_highlight_debug`.
Since `javaStringError` is commented out for its generality,
let's comment out `javaDebugStringError`, its copy, as well.
References:
https://openjdk.org/jeps/378
https://docs.oracle.com/javase/specs/jls/se17/html/jls-3.html#jls-3.10.7
Closes #10910.
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Use the standard format for browsefilter labels:
"File Description (*.ext1, *.ext2, *.ext3)"
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
* Emend the Unicode and octal escape sequence patterns;
* Accept the (repeated) underscore separators in all
numerical literals;
* Recognise hexadecimal floating-point literals.
(The space escape sequence '\s' will be introduced along
with text blocks in another PR.)
References:
https://docs.oracle.com/javase/specs/jls/se17/html/jls-3.html#jls-3.3
https://docs.oracle.com/javase/specs/jls/se17/html/jls-3.html#jls-3.10.1
https://docs.oracle.com/javase/specs/jls/se17/html/jls-3.html#jls-3.10.2
https://docs.oracle.com/javase/specs/jls/se17/html/jls-3.html#jls-3.10.7
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
- Mention the default selection behavior
- Remove useless sentence
- Correct description about space padding
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Update Last-Change Header for netrw and doc/indent.txt, fix a trailing
whitespace in indent.txt and make CI happy.
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
fixes: #2386
related: #3609
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
There have been many complaints about Yaml indenting too much, because
it considers values to be multi-line by default, which leads to
unintended indenting for (apparently most) users.
So let's hide this feature behind the new feature flag, keep it
simple and prefer single line value key pairs by default.
If you want the old behaviour, set the following value: >
:let g:yaml_indent_multiline_scalar = 1
If not set, it will indent the same as the previous line.
closes #13845
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: getregion() can be improved (after v9.1.120)
Solution: change getregion() implementation to use pos as lists and
one optional {opt} dictionary (Shougo Matsushita)
Note: The following is a breaking change!
Currently, the getregion() function (included as of patch v9.1.120) takes
3 arguments: the first 2 arguments are strings, describing a position,
arg3 is the type string.
However, that is slightly inflexible, there is no way to specify
additional arguments. So let's instead change the function signature to:
getregion(pos1, pos2 [, {Dict}]) where both pos1 and pos2 are lists.
This is slightly cleaner, and gives us the flexibility to specify
additional arguments as key/value pairs to the optional Dict arg.
Now it supports the "type" key to specify the selection type
(characterwise, blockwise or linewise) and now in addition one can also
define the selection type, independently of what the 'selection' option
actually is.
Technically, this is a breaking change, but since the getregion()
Vimscript function is still quite new, this should be fine.
closes: #14090
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14106
Signed-off-by: elig0n <31196036+elig0n@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Also:
- distinguish _yield_ when used as a contextual keyword from
when used qualified as a method or a method reference (as
can be seen in testdir/input/java_switch.java, variables
and method declarations named _yield_ will be recognised
as the namesake keyword--consider picking other names for
variables, and defining g:java_highlight_functions to have
method names painted; since _yield_ statements can have
trailing parens, they must be recognised as statements,
for only qualified _yield_ method calls are supported);
- recognise grouped _default_ _case_ labels;
- describe primitive types for _case_ labels (JLS, §14.11,
§3.10.1);
- recognise some non-ASCII identifiers (see javaLambdaDef,
javaUserLabel) (further improvement for better recognition
of identifiers will be arranged in a separate PR).
Because the arrow '->' is used in two kinds of expressions,
lambda (abstractions) and _switch_, necessary changes were
made for the recognition of either (and further improvement
touching lambda expressions will be separately arranged).
Because 'default' is used for instance method declarations
in interfaces and in _switch_ labels, necessary changes were
made for the recognition of either (and further improvement
touching method declarations will be separately arranged).
Finally, it deemed appropriate to put 'yield' in the syntax
group of javaOperator rather than javaStatement, for its
member 'var' is also another contextual keyword (e.g., this
is valid syntax: "var var = var(test.var);").
References:
https://openjdk.org/jeps/361 (Switch Expressions)
https://openjdk.org/jeps/440 (Record Patterns)
https://openjdk.org/jeps/441 (Pattern Matching for switch)
Also, add a Java specific filetype plugin for the syntax
test, so that no soft-wrapping of long indented lines occur.
Otherwise the syntax scripts would miss a few lines during
scrolling and verification of the screen dumps.
closes: #14105
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
The whole testdir/runtest.vim is a bit of a mess. So this is an attempt
to improving the current state. First of all, let's move most of the
code into a single RunTest() function so that it's easier to run this
manually.
Then, let's add the possibility to customize filetype specific tests by
applying filetype specific options. We will make use of it in the next
commit, where the provided java file uses tabs, which cause line
wrapping which will then cause the scrolling to miss some lines when
redrawing (see #14105)
related: #14105
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Add the 'b' flag to 'comments', so that the shebang line is not detected as comment.
Fixes #14101.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
- Normalise behaviour of :echo commands and improve expression matching.
- Allow continued argument lines.
- Refine string interpolation groups.
- Remove duplicated :menu and :map generated commands that are handled
specially later in the file.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
* debversions.vim: Move lunar to unsupported release
* debsources: Add word boundaries around keyword match patterns
Co-authored-by: James Addison <jay@jp-hosting.net>
Signed-off-by: James Addison <jay@jp-hosting.net>
Signed-off-by: James McCoy <jamessan@jamessan.com>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
- Differentiate between :substitute and substitute(), fixes #13883.
- Match all allowed :substitute delimiters.
- Remove leading context from :substitute matches.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14092
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
methods
Problem: Vim9: need more test for exists()
Solution: Add test for exists() with class/objct variables and methods
(Yegappan Lakshmanan)
closes: #14088
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14062
Signed-off-by: Matt Ellis <m.t.ellis@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: font ligatures don't render correctly in the Win32 GUI-version
of gvim even when set rop=type:directx is used. Setting
guiligatures also doesn't make any difference. This leads to
broken font ligatures when the cursor passes through them. It
does not recover from this, and they remain broken until you
re-render the whole buffer (e.g. by using Ctrl+L).
Solution: the problem is that we only re-draw the current and previous
character in gui_undraw_cursor() and only have the special case
for GTK when it comes to rendering ligatures. So let's enable
gui_adjust_undraw_cursor_for_ligatures() to also happen for
Win32 GUI if guiligatures is setup correctly (all this does is
expand the range of gui_undraw_cursor() with ligature characters).
related: #9181
related: #12901
closes: #14084
Signed-off-by: Erik S. V. Jansson <caffeineviking@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14080
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
dragonish <no.web.developer@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|