Age | Commit message (Collapse) | Author |
|
Problem: filetype: support for gnuplot files is lacking
Solution: Also detect *.gnuplot files
(RobbiZ98)
closes: #14243
Signed-off-by: RobbiZ98 <113035863+RobbiZ98@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vento files are not recognized.
Solution: Recognize *.vto files as filetype "vento" (wrapperup)
Vento is a templating engine https://vento.js.org/
closes: #14229
Signed-off-by: wrapperup <wrapperup4@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Dafny files are not recognized.
Solution: Recognize *.dfy files as filetype "dafny" (zeertzjq).
Ref: https://dafny.org/
Ref: https://github.com/mlr-msft/vim-loves-dafny
closes: #14226
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
The '*.bats' file type is for Bash Automated Testing System (BATS)
scripts. BATS scripts are Bash with a special '@test' extension but they
otherwise work with Vim's bash filetype.
See https://github.com/bats-core/bats-core
closes: #14039
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
The 'Config.in' file type is for Buildroot configuration files.
Buildroot Config.in files use the same Kconfig backend as the Linux
kernel's Kconfig files.
Buildroot also has other filename variants that follow "Config.in.*",
they are used to distinguish multiple Config.in files in the same
directory.
See https://buildroot.org/downloads/manual/manual.html#_literal_config_in_literal_file
closes: #14038
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: filetype: no support for its files
Solution: Add detection for *.its files as dts file type
(Brandon Maier)
The '*.its' file type is for U-Boot Flattened Image Trees (FIT) which
use the flattened devicetree format.
See https://github.com/u-boot/u-boot/blob/master/doc/usage/fit/source_file_format.rst#terminology
closes: #14037
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: filetype: no support for dtso files
Solution: Add detection for *.dtso files as dts file type
(Markus Schneider-Pargmann)
*.dtso files are devicetree overlay files which have the same syntax as dts or dtsi files.
closes: #14026
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: luau config file not detected
(lopy)
Solution: Detect it as jsonc
(lopy)
fixes: #13960
closes: #13970
Signed-off-by: lopy <70210066+lopi-py@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes #13886
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Modula2 filetype support lacking
Solution: Improve the Modula-2 runtime support, add additional modula2
dialects, add compiler plugin, update syntax highlighting,
include syntax tests, update Makefiles (Doug Kearns)
closes: #6796
closes: #8115
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Benjamin Kowarsch <trijezdci@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: no filetype detection for execline scripts
Solution: Add filetype detection for execline
as a prior to adding syntax support for execline (see
https://github.com/djpohly/vim-execline/issues/2), i went ahead and made
the filetype detection for execline scripts.
closes: #13689
Signed-Off-By: Mazunki Hoksaas <rolferen@gmail.com>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
So only set the filetype to cpp for *.C and *.H files, if
'fileignorecase' option is not set.
Signed-off-by: shane.xb.qian <shane.qian@foxmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim does not detect pacman.log file
Solution: Detect pacmanlogs and add syntax highlighting
pacman.log is a filetype common to Arch Liux and related distributions.
Add some simple syntax highlighting for the pacmanlog filetype.
closes: #13618
Signed-off-by: Ronan Pigott <ronan@rjp.ie>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: html.angular ft is problematic
Solution: partly revert v9.0.2137
The html.angular filetype causes issues and does not trigger FileType
autocommands for the html or angular filetypes.
So let's roll back that particular change and detect this only as html
file
related: https://github.com/vim/vim/pull/13594#issuecomment-1834465890
closes: #13604
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Can't detect angular & mustache filetypes
Solution: Detect *.mustache as Mustache filetype;
detect *.component.html as html.angular filetype
closes: #13594
Signed-off-by: ObserverOfTime <chronobserver@disroot.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: not all nushell files detected
Solution: use *.nu to detect nushell files
closes: #13586
Signed-off-by: Daniel Buch Hansen <boogiewasthere@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Add syntax and filetype plugins for SWIG (Simplified Wrapper Interface
Generator) description files.
The default syntax for .i files highlights comments in a reverse
color scheme which doesn't look well. This syntax builds
on vim's c++ syntax by adding highlighting for common swig
directives and user defined directives. For an alternative
syntax, see vimscript #1247 (which I found after writing this).
closes: #13562
Co-authored-by: Matěj Cepl <mcepl@cepl.eu>
Co-authored-by: Julien Marrec <julien.marrec@gmail.com>
Signed-off-by: Julien Marrec <julien.marrec@gmail.com>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: wast filetype should be replaced by wat filetype
Solution: start using the official wat filetype name
runtime: rename `wast` filetype to `wat` (Wasm text format)
The problem is the name of the current filetype wast. When the plugin
was initially created, the file extension for Wasm text format was not
fixed and .wast was more popular.
However, recently .wat became the official file extension for
WebAssembly text (WAT) format and .wast is now a file extension for the
unofficial WAST format, which is a superset of .wat for the convenience
to describe the Wasm specification conformance tests.
https://webassembly.js.org/docs/contrib-wat-vs-wast.html
However for now, let's keep using the `wat` filetype even for the .wast
extension, so that we at least do not lose the filetype settings and
syntax highlighting. This can be adjusted later, if it turns out to have
a separate need for.
closes: #13533
Signed-off-by: rhysd <lin90162@yahoo.co.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: No filetype support for xcompose files
Solution: Add filetype detection
closes: #13508
Signed-off-by: ObserverOfTime <chronobserver@disroot.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: No support for cypher files
Solution: Add cypher filetype detection
Cypher query language support to work with (mostly) graph databases.
Already existing lsp support in Neovim's nvim-lspconfig:
https://github.com/neovim/nvim-lspconfig/blob/master/doc/server_configurations.md#cypher_ls
closes: #13516
Signed-off-by: Gerrit Meier <meistermeier@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: objdump files not recognized
Solution: detect *.objdump files, add a filetype plugin
Added the objdump file/text format
closes: #13425
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
|
|
Problem: pacman hooks are detected as conf filetype
Solution: make it consistent to pacman.conf and detect those
hooks as confini
Because confini has much better syntax highlighting than conf.
For reference, I identified pacman.conf and pacman hooks as dosini in
https://github.com/vim/vim/pull/6335, then
https://github.com/vim/vim/pull/10213 changed them to conf, then
https://github.com/vim/vim/pull/10518 changed pacman.conf to confini but
forgot to change hooks.
closes: #13399
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Guido Cella <guido@guidocella.xyz>
|
|
Problem: Janet files are not recognised
Solution: Add filename and shebang detection (without
adding an extra filetype plugin)
Those are used by the Janet language:
http://www.janet-lang.org
closes: #13400
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
|
|
Problem: not able to detect xkb filetypes
Solution: Detect files below /u/s/X11/xkb as xkb files (without adding
an extra filetype)
Those files are used from the X11 xkb extension
closes: #13401
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Guido Cella <guido@guidocella.xyz>
|
|
Problem: *.{gn,gni} files are not recognized
Solution: Detect some as gn filetype (without adding an extra filetype)
Those come from: https://gn.googlesource.com/gn/
closes: #13405
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Amaan Qureshi <amaanq12@gmail.com>
|
|
Update runtime files from upstream (https://github.com/zig/zig.vim) at
commit 54c216e5306a5c3878a60596aacb94dca8652ab9.
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: no filetype detection for Debian sources
Solution: Add new deb822sources filetype
closes: #13320
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: James McCoy <jamessan@jamessan.com>
|
|
Problem: INI files not detected
Solution: detect uppercase .INI as dosini files
It previo~1 only worked for lower-case .ini files, but upperc~1 .INI is
also somewhat common on account of DOS' old 8.3 upperc~2 only filena~1.
closes: #13316
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Martin Tournoij <martin@arp242.net>
|
|
See https://github.com/vim/vim/pull/13271#discussion_r1347279686 and
https://github.com/NoahTheDuke/vim-just/blob/main/ftdetect/just.vim.
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: No filetype detection for just files
Solution: Detect just files (*.just, justfile, etc)
closes: #13271
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: dundargoc <gocdundar@gmail.com>
|
|
Problem: No filetype detection for Authzed filetypes
Solution: Detect the *.zed file extension as authzed filetype
closes: #13129
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Matt Polzin <mpolzin@workwithopal.com>
|
|
Problem: No support for liquidsoap filetypes
Solution: Add liquidsoap filetype detection code
closes: #13111
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Romain Beauxis <toots@rastageeks.org>
|
|
Problem: No runtime support for Mojo
Solution: Add basic filetype and syntax plugins
closes: #13062
closes: #13063
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Co-authored-by: Mahmoud Abduljawad <mahmoud@masaar.com>
|
|
runtime(filetype): Add norg markup language detection
closes: #12913
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: NTBBloodbath <bloodbathalchemist@protonmail.com>
|
|
Problem: Vimball/Visual Basic filetype detection conflict
Solution: runtime(vb): Improve Vimball and Visual Basic detection logic
Only run Vimball Archiver's BufEnter autocommand on Vimball archives.
Fixes #2694.
closes: #12899
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
|
|
Problem: cannot distinguish Forth and Fortran *.f files
Solution: Add Filetype detection Code
Also add *.4th as a Forth filetype
closes: #12251
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
|
|
Problem: Runtime: no support for bicep files
Solution: Add filetype support for bicepparam
closes: #12784
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Scott McKendry <scott.c.mckendry@gmail.com>
|
|
Problem: Runtime: Missing QML support
Solution: Add QML support to Vim
closes: #12810
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: ChaseKnowlden <haroldknowlden@gmail.com>
|
|
* Dedicate upcoming Vim 9.1 to Bram
Also replace in a few more places Brams email address and mention new
maintainers.
* Remove Bram from any Maintainer role
* runtime: Align Header
* it's mailing list not mailinglist
|
|
This is a collection of various PRs from github that all require a minor
patch number:
1) https://github.com/vim/vim/pull/12612
Do not conflate dictionary key with end of block
2) https://github.com/vim/vim/pull/12729:
When saving and restoring 'undolevels', the constructs `&undolevels` and
`:set undolevels` are problematic.
The construct `&undolevels` reads an unpredictable value; it will be the
local option value (if one has been set), or the global option value
(otherwise), making it unsuitable for saving a value for later
restoration.
Similarly, if a local option value has been set for 'undolevels',
temporarily modifying the option via `:set undolevels` changes the local
value as well as the global value, requiring extra work to restore both
values.
Saving and restoring the option value in one step via the construct
`:let &undolevels = &undolevels` appears to make no changes to the
'undolevels' option, but if a local option has been set to a different
value than the global option, it has the unintended effect of changing
the global 'undolevels' value to the local value.
Update the documentation to explain these issues and recommend explicit
use of global and local option values when saving and restoring. Update
some unit tests to use `g:undolevels`.
3) https://github.com/vim/vim/pull/12702:
Problem: Pip requirements files are not recognized.
Solution: Add a pattern to match pip requirements files.
4) https://github.com/vim/vim/pull/12688:
Add indent file and tests for ABB Rapid
5) https://github.com/vim/vim/pull/12668:
Use Lua 5.1 numeric escapes in tests and add to CI
Only Lua 5.2+ and LuaJIT understand hexadecimal escapes in strings. Lua
5.1 only supports decimal escapes:
> A character in a string can also be specified by its numerical value
> using the escape sequence \ddd, where ddd is a sequence of up to three
> decimal digits. (Note that if a numerical escape is to be followed by a
> digit, it must be expressed using exactly three digits.) Strings in Lua
> can contain any 8-bit value, including embedded zeros, which can be
> specified as '\0'.
To make sure this works with Lua 5.4 and Lua 5.1 change the Vim CI to
run with Lua 5.1 as well as Lua 5.4
6) https://github.com/vim/vim/pull/12631:
Add hurl filetype detection
7) https://github.com/vim/vim/pull/12573:
Problem: Files for haskell persistent library are not recognized
Solution: Add pattern persistentmodels for haskell persistent library
closes: #12612
closes: #12729
closes: #12702
closes: #12688
closes: #12668
closes: #12631
closes: #12573
Co-authored-by: lacygoill <lacygoill@lacygoill.me>
Co-authored-by: Michael Henry <drmikehenry@drmikehenry.com>
Co-authored-by: ObserverOfTime <chronobserver@disroot.org>
Co-authored-by: KnoP-01 <knosowski@graeffrobotics.de>
Co-authored-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: Jacob Pfeifer <jacob@pfeifer.dev>
Co-authored-by: Borys Lykah <lykahb@fastmail.com>
|
|
|
|
https://github.com/voxpupuli/hiera-eyaml/ uses and produces the eyaml
format, which is simply yaml with some encrypted values.
It's convenient to edit the file without decrypting when not touching
encrypted values (or when you don't have access to the decryption key),
which is why vim should treat those files as yaml files.
|
|
Co-authored-by: Turiiya <34311583+tobealive@users.noreply.github.com>
|
|
Problem: PyPA manifest files are not recognized.
Solution: Add a pattern to match PyPA manifest files.
|
|
|
|
The current W3C Working Draft for the WebGPU Shading Language (WGSL) specifies
'text/wgsl' media type for WGSL modules with the '.wgsl' file extension:
https://www.w3.org/TR/WGSL/#text-wgsl-media-type
It has also been registered at the Internet Assigned Numbers Authority (IANA):
https://www.iana.org/assignments/media-types/text/wgsl
Neovim's nvim-lspconfig already associates wgsl language servers
with 'filetype wgsl':
https://github.com/neovim/nvim-lspconfig/blob/master/doc/server_configurations.md#wgsl_analyzer
However currenly setting 'filetype wgsl' for *.wgsl files by defalut in Neovim
is blocked by adding this filetype to the vim project first:
https://github.com/neovim/neovim/pull/23331
This commit adds this missing wgsl filetype.
|
|
Problem: Blade files are not recognized.
Solution: Add a pattern for Blade files. (closes #12650)
Co-authored-by: Bram Moolenaar <Bram@vim.org>
|
|
Problem: PEM files are not recognized.
Solution: Add patterns to match PEM files. (closes #12582)
|
|
Problem: BUCK files are not recognized.
Solution: Recognize BUCK files as "bzl". (Son Luong Ngoc, closes #12564)
|
|
Problem: zserio files are not recognized.
Solution: Add a pattern for zserio files. (Dominique Pellé,
closes #12544)
|