| Age | Commit message (Collapse) | Author |
|---|
|
Problem: cannot use fuzzy keyword completion
(Maxim Kim)
Solution: add the "fuzzycollect" value for the 'completeopt'
setting, to gather matches using fuzzy logic (glepnir)
fixes: #14912
closes: #14976
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #15034
Signed-off-by: h-east <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cannot see matched text in popup menu
Solution: Introduce 2 new highlighting groups: PmenuMatch and
PmenuMatchSel (glepnir)
ping @habamax, @neutaaaaan @romainl because vim/colorschemes may need
some updates, @lifepillar for updating vim-colortemplate
closes: #14694
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cannot have buffer-local value for 'completeopt'
(Nick Jensen).
Solution: Make 'completeopt' global-local (zeertzjq).
Also for some reason test Test_ColonEight_MultiByte seems to be failing
sporadically now. Let's mark it as flaky.
fixes: #5487
closes: #14922
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
related: #14912
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: no whitespace padding in commentstring option in ftplugins
Solution: Change default to include whitespace padding, update
existing filetype plugins with the new default value
(Riley Bruins)
closes: #14843
Signed-off-by: Riley Bruins <ribru17@hotmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: no fuzzy-matching support for insert-completion
Solution: enable insert-mode completion with fuzzy-matching
using :set completopt+=fuzzy (glepnir).
closes: #14878
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
fixes: #14893
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: 'viewdir' not respecting $XDG_CONFIG_HOME
(Danilo Rezende, after v9.1.327)
Solution: adjust 'viewdir' option when enabling XDG config mode
fixes: #14680
closes: #14708
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Two unrelated things are tested by a single test.
Solution: Split it into two, restoring the old Test_brace_single_line().
Add missing cleanup to some tests.
(zeertzjq)
closes: #14323
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
closes: #14316
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Page-wise scrolling with Ctrl-F/Ctrl-B implements
it's own logic to change the topline and cursor.
In doing so, skipcol is not handled properly for
'smoothscroll', and virtual lines.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y while staying
backward compatible as much as possible.
closes: #14268
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14295
Signed-off-by: Song-Tianxiang <149415622+Song-Tianxiang@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
- Make it not sound like a buffer option.
- "!" is called a modifier, not an option.
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: shm=F not respected when reloading buffer with 'autoread'
Solution: Check SHM_FILEINFO in buf_check_timestamp()
(Shougo Matsushita)
closes: #14144
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cannot keep a buffer focused in a window
(Amit Levy)
Solution: Add the 'winfixbuf' window-local option
(Colin Kennedy)
fixes: #6445
closes: #13903
Signed-off-by: Colin Kennedy <colinvfx@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14062
Signed-off-by: Matt Ellis <m.t.ellis@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: font ligatures don't render correctly in the Win32 GUI-version
of gvim even when set rop=type:directx is used. Setting
guiligatures also doesn't make any difference. This leads to
broken font ligatures when the cursor passes through them. It
does not recover from this, and they remain broken until you
re-render the whole buffer (e.g. by using Ctrl+L).
Solution: the problem is that we only re-draw the current and previous
character in gui_undraw_cursor() and only have the special case
for GTK when it comes to rendering ligatures. So let's enable
gui_adjust_undraw_cursor_for_ligatures() to also happen for
Win32 GUI if guiligatures is setup correctly (all this does is
expand the range of gui_undraw_cursor() with ligature characters).
related: #9181
related: #12901
closes: #14084
Signed-off-by: Erik S. V. Jansson <caffeineviking@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: too vague errors for 'listchars'/'fillchars'
Solution: Include the field name in error message.
(zeertzjq)
related: neovim/neovim#27050
closes: #13877
Co-authored-by: Cole Frankenhoff <cole.nhf@gmail.com>
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: reloading colorscheme when not changing 'background'
Solution: Check, if the background option value actually changed,
if not, return early.
Only reload colorscheme when bg is changed
Currently the highlight groups are re-initialized and the colorscheme
(if any) is reloaded anytime 'background' is set, even if it is not
changed. This is unnecessary, because if the value was not changed then
there is no need to change highlight groups or do anything with the
colorscheme. Instead, only reload the colorscheme if the value of
'background' was actually changed.
closes: #13700
Signed-off-by: Gregory Anders <greg@gpanders.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Need a new release
Solution: Release Vim 9.1
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Maximum callback depth is not configurable.
Solution: Revert patch 9.0.2103. Set 'maxfuncdepth' in test.
(zeertzjq)
fixes: #13732
closes: #13736
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Deprecated can be misunderstood as being slated for removal; slightly
change wording to be clearer.
Signed-off-by: dundargoc <gocdundar@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Related to: vim/vim#13630
1. Sort section 3 (option-summary) of runtime/doc/options.txt in
alphabetical order.
2. Remove double newlines in section 3 (option-summary).
I did not alphabetically sort ttimeout and ttimeoutlen because they seem
to belong with timeout and timeoutlen respectively, but I would like
some input on that decision.
Signed-off-by: laburnumT <laburnumtec@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: recursive callback may cause issues on some archs
Solution: Decrease the limit drastically to 20
Recursive callback limit causes problems on some architectures
Since commit 47510f3d6598a1218958c03ed11337a43b73f48d we have a test
that causes a recursive popup callback function to be executed. However
it seems the current limit of 'maxfuncdepth' option value is still too
recursive for some 32bit architectures (e.g. 32bit ARM).
So instead of allowing a default limit of 100 (default value for
'maxfuncdepth'), let's reduce this limit to 20. I don't think there is a
use case where one would need such a high recursive callback limit and a
limit of 20 seems reasonable (although it is currently hard-coded).
closes: #13495
closes: #13502
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #13503
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: statusline may look different than expected
Solution: do not check for highlighting of stl and stlnc characters
statusline fillchar may be different than expected
If the highlighting group for the statusline for the current window
|hl-StatusLine| or the non-current window |hl-StatusLineNC| are cleared
(or do not differ from each other), than Vim will use the hard-coded
fallback values '^' (for the non-current windows) or '=' (for the
current window). I believe this was done, to make sure the statusline
will always be visible and be distinguishable from the rest of the
window.
However, this may be unexpected, if a user explicitly defined those
fillchar characters just to notice that those values are then not used
by Vim.
So, let's assume users know what they are doing and just always return
the configured stl and stlnc values. And if they want the statusline to
be non-distinguishable from the rest of the window space, so be it. It
is their responsibility and Vim shall not know better what to use.
fixes: #13366
closes: #13488
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
documentation (#13448)
Problem: Not all secure options document their status
Solution: Describe secure context :set restrictions in each help entry
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
related: #13398
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
* Fix typos in several documents
* Update runtime/doc/terminal.txt
Co-authored-by: K.Takata <kentkt@csc.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: A few remaining cmdline completion issues with C-E/Y
Solution: Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not
used at the end
Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not used at the end
A few places in the cmdline completion code only works properly when the
user hits Tab (or 'wildchar') at the end of the cmdline, even though
it's supposed to work even in the middle of the line.
For fuzzy search, `:e ++ff`, and `:set hl=`, fix completion code to make
sure to use `xp_pattern_len` instead of assuming the entire `xp_pattern`
is the search pattern (since it contains texts after the cursor).
Fix Ctrl-E / Ctrl-Y to not jump to the end when canceling/accepting a
wildmenu completion. Also, make them work even when not using
`set wildoptions+=pum` as there is no drawback to doing so.
(Related issue where this was brought up: #13331)
closes: #13362
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
|
|
Problem: [security] use-after-free with wildmenu
Solution: properly clean up the wildmenu when exiting
Fix wildchar/wildmenu/pum memory corruption with special wildchar's
Currently, using `wildchar=<Esc>` or `wildchar=<C-\>` can lead to a
memory corruption if using wildmenu+pum, or wrong states if only using
wildmenu. This is due to the code only using one single place inside the
cmdline process loop to perform wild menu clean up (by checking
`end_wildmenu`) but there are other odd situations where the loop could
have exited and we need a post-loop clean up just to be sure. If the
clean up was not done you would have a stale popup menu referring to
invalid memory, or if not using popup menu, incorrect status line (if
`laststatus=0`).
For example, if you hit `<Esc>` two times when it's wildchar, there's a
hard-coded behavior to exit command-line as a failsafe for user, and if
you hit `<C-\><C-\><C-N>` it will also exit command-line, but the clean
up code would not have hit because of specialized `<C-\>` handling.
Fix Ctrl-E / Ctrl-Y to not cancel/accept wildmenu if they are also
used for 'wildchar'/'wildcharm'. Currently they don't behave properly,
and also have potentially memory unsafe behavior as the logic is
currently not accounting for this situation and try to do both.
(Previous patch that addressed this: #11677)
Also, correctly document Escape key behavior (double-hit it to escape)
in wildchar docs as it's previously undocumented.
In addition, block known invalid chars to be set in `wildchar` option,
such as Ctrl-C and `<CR>`. This is just to make it clear to the user
they shouldn't be set, and is not required for this bug fix.
closes: #13361
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
|
|
"but don't insert it" is wrong.
Also move them just below <Up> <Down> as they are more similar.
|
|
Problem: no max callback recursion limit
Solution: bail out, if max call recursion for callback functions
has been reached.
This checks the 'maxfuncdepth' setting and throws E169 when a callback
function recursively calls itself.
closes: #13337
closes: #13339
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
* Improve command-line completion docs
Add more details about 'ignorecase' and its effect on cmdline
completion.
Make sure keys used in wildmenu are properly documented and linked in the
keys' documentation entries, and in `:h index` for proper
cross-referencing, as wildmenu popup is slightly different from
insert-mode popup menu.
* Fix docs typos
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: cmdline-completion for comma-separated options wrong
Solution: Fix command-line expansions for options with filenames with
commas
Fix command-line expansions for options with filenames with commas
Cmdline expansion for option values that take a comma-separated list
of file names is currently not handling file names with commas as the
commas are not escaped. For such options, the commas in file names need
to be escaped (to differentiate from a comma that delimit the list
items). The escaped comma is unescaped in `copy_option_part()` during
option parsing.
Fix as follows:
- Cmdline completion for option values with comma-separated file/folder
names will not start a new match when seeing `\\,` and will instead
consider it as one value.
- File/folder regex matching will strip the `\\` when seeing `\\,` to
make sure it can match the correct files/folders.
- The expanded value will escape `,` with `\\,`, similar to how spaces
are escaped to make sure the option value is correct on the cmdline.
This fix also takes into account the fact that Win32 Vim handles file
name escaping differently. Typing '\,' for a file name results in it
being handled literally but in other platforms '\,' is interpreted as a
simple ',' and commas need to be escaped using '\\,' instead.
Also, make sure this new logic only applies to comma-separated options
like 'path'. Non-list options like 'set makeprg=<Tab>' and regular ex
commands like `:edit <Tab>` do not require escaping and will continue to
work.
Also fix up documentation to be clearer. The original docs are slightly
misleading in how it discusses triple slashes for 'tags'.
closes: #13303
related: #13301
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
|
|
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: cmdline completion should consider key option
Solution: Disable cmdline completion for key option, slightly
refactor how P_NO_CMD_EXPAND is handled
Harden crypto 'key' option: turn off cmdline completion, disable set-=
"set-=" can be used maliciously with a crypto key, as it allows an
attacker (who either has access to the computer or a plugin author) to
guess a substring by observing the modified state. Simply turn off
set+=/-=/^= for this option as there is no good reason for them to be
used.
Update docs to make that clear as well.
Also, don't allow cmdline completion for 'key' as it just shows *****
which is not useful and confusing to the user what it means (if the user
accidentally hits enter they will have replaced their key with "*****"
instead).
Move logic to better location, don't use above 32-bit for flags
Move P_NO_CMD_EXPAND to use the unused 0x20 instead of going above
32-bits, as currently the flags parameter is only 32-bits on some
systems. Left a comment to warn that future additions will need to
change how the flags work either by making it 64-bit or split into two
member vars.
Also, move the logic for detecting P_NO_CMD_EXPAND earlier so it's not
up to each handler to decide, and you won't see the temporary "..." that
Vim shows while waiting for completion handler to complete.
closes: #13224
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
|
|
Problem: cannot complete option values
Solution: Add completion functions for several options
Add cmdline tab-completion for setting string options
Add tab-completion for setting string options on the cmdline using
`:set=` (along with `:set+=` and `:set-=`).
The existing tab completion for setting options currently only works
when nothing is typed yet, and it only fills in with the existing value,
e.g. when the user does `:set diffopt=<Tab>` it will be completed to
`set diffopt=internal,filler,closeoff` and nothing else. This isn't too
useful as a user usually wants auto-complete to suggest all the possible
values, such as 'iblank', or 'algorithm:patience'.
For set= and set+=, this adds a new optional callback function for each
option that can be invoked when doing completion. This allows for each
option to have control over how completion works. For example, in
'diffopt', it will suggest the default enumeration, but if `algorithm:`
is selected, it will further suggest different algorithm types like
'meyers' and 'patience'. When using set=, the existing option value will
be filled in as the first choice to preserve the existing behavior. When
using set+= this won't happen as it doesn't make sense.
For flag list options (e.g. 'mouse' and 'guioptions'), completion will
take into account existing typed values (and in the case of set+=, the
existing option value) to make sure it doesn't suggest duplicates.
For set-=, there is a new `ExpandSettingSubtract` function which will
handle flag list and comma-separated options smartly, by only suggesting
values that currently exist in the option.
Note that Vim has some existing code that adds special handling for
'filetype', 'syntax', and misc dir options like 'backupdir'. This change
preserves them as they already work, instead of converting to the new
callback API for each option.
closes: #13182
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
|
|
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: not possible to use the jumplist like a stack
Solution: Add the 'jumpoptions' setting to make the jumplist
a stack.
Add an option for using jumplist like tag stack
related: #7738
closes: #13134
ported from NeoVim:
- https://neovim.io/doc/user/motion.html#jumplist-stack
- neovim/neovim@39094b3
- neovim/neovim#11530
- https://vi.stackexchange.com/questions/18344/how-to-change-jumplist-behavior
Based on the feedback in the previous PR, it looks like many people like
this option.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Co-authored-by: butwerenotthereyet <58348703+butwerenotthereyet@users.noreply.github.com>
|
|
This is a collection of various improvements to the help pages
closes #12790
Co-authored-by: Houl <anwoku@yahoo.de>
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Co-authored-by: Adri Verhoef <a3@a3.xs4all.nl>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: sidescrolloff and scrolloff options work slightly
different than other global-local options
Solution: Make it behave consistent for all global-local options
It was noticed, that sidescrolloff and scrolloff options behave
differently in comparison to other global-local window options like
'listchars'
So make those two behave like other global-local options. Also add some
extra documentation for a few special local-window options.
Add a few tests to make sure all global-local window options behave
similar
closes: #12956
closes: #12643
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
