Age | Commit message (Collapse) | Author |
|
closes: #14770
Signed-off-by: Enno <Konfekt@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cannot get a list of positions describing a region
(Justin M. Keyes, after v9.1.0120)
Solution: Add the getregionpos() function
(Shougo Matsushita)
fixes: #14609
closes: #14617
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14720
Co-authored-by: Christian Clason <c.clason@uni-graz.at>
Signed-off-by: h-east <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
When "sid" is specified, it returns a List with a single item.
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
fixes: #14643
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
These should generally be formatted as func([{arg}]) and referenced as
{arg} in the description.
closes: #14438
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: console dialog cannot save unnamed buffers
Solution: set bufname before save (glepnir). Define dialog_con_gui
to test for GUI+Console dialog support, use it to skip
the test when the GUI feature has been defined.
Note: The dialog_changed() function will also try to call the
browse_save_fname() function, when FEAT_BROWSE is defined (which is only
defined in a GUI build of Vim). This will eventually lead to a call of
do_browse(), which causes an error message if a GUI is not currently
running (see the TODO: in do_browse()) and will then lead to a failure
in Test_goto_buf_with_onfirm().
Therefore, we must disable the Test_goto_buf_with_onfirm(), when the
dialog_con_gui feature is enabled (which basically means dialog feature
for GUI and Console builds, in contrast to the dialog_con and dialog_gui
feature).
(Previously this wasn't a problem, because the test aborted in the YES
case for the :confirm :b XgotoConf case and did therefore not run into
the browse function call)
closes: #14398
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
- Mention the support of eval() for enumeration values.
- Clarify the extent of immutability for enumeration values.
- Specify the requirements for class methods to meet for
class variable initialisation and their use in nested
functions and lambda expressions.
- Remove a duplicate sentence that describes how to access
parent class methods in derivative classes (see another
"copy" two paragraphs below).
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: string() output of enum is problematic
Solution: Make string() output for an enum consistent with that of a
regular object (Yegappan Lakshmanan).
closes: #14343
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14324
Signed-off-by: mityu <mityu.mail@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: No enum support
Solution: Implement enums for Vim9 script
(Yegappan Lakshmanan)
closes: #14224
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Not enough tests for the slice() function.
Solution: Test with multibyte chars, and in both Legacy and Vim9 script.
Update docs to be clearer about how it treats composing chars.
(zeertzjq)
closes: #14275
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: no overflow check for string formatting
Solution: Check message formatting function for overflow.
(Chris van Willegen)
closes: #13799
Signed-off-by: Christ van Willegen <cvwillegen@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: winframe functions incorrectly recompute window positions if
the altframe wasn't adjacent to the closed frame, which is
possible if adjacent windows had 'winfix{width,height}' set.
Solution: recompute for windows within the parent of the altframe and
closed frame. Skip this (as before) if the altframe was
top/left, but only if adjacent to the closed frame, as
positions won't change in that case. Also correct the return
value documentation for win_screenpos. (Sean Dewar)
The issue revealed itself after removing the win_comp_pos call below
winframe_restore in win_splitmove. Similarly, wrong positions could result from
windows closed in other tabpages, as win_free_mem uses winframe_remove (at least
until it is entered later, where enter_tabpage calls win_comp_pos).
NOTE: As win_comp_pos handles only curtab, it's possible via other means for
positions in non-current tabpages to be wrong (e.g: after changing 'laststatus',
'showtabline', etc.). Given enter_tabpage recomputes it, maybe it's intentional
as an optimization? Should probably be documented in win_screenpos then, but I
won't address that here.
closes: #14191
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
related: #14173
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: more places exist where curwin == prevwin, and it may even be
expected in some cases.
Solution: revert v9.1.0001, but document that it's possible instead.
(Sean Dewar)
I've had a change of heart for the following reasons:
- A quick 'n dirty [GitHub code
search](https://github.com/search?q=%2F%28winnr%5C%28%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%7Cwinnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5C%29%29%2F&type=code)
reveals some cases where it's expected in the wild.
Particularly, it made me aware `winnr() == winnr('#')` is possible when curwin
is changed temporarily during the evaluation of a &statusline expression item
(`%{...}`), and is used to show something different on the statusline
belonging to the previous window; that behaviour wasn't changed in v9.1.0001,
but it means curwin == prevwin makes sense in some cases.
- The definition and call sites of back_to_prevwin imply some expectation that
prevwin == wp (== curwin) is possible, as it's used to skip entering the
prevwin in that case.
- Prior to v9.1.0001, `:wincmd p` would not beep in the case that was patched in
v9.1.0001, but now does. That resulted in #14047 being opened, as it affected
the CtrlP plugin.
I find it odd that `:wincmd p` had cases where it wouldn't beep despite doing
nothing, but it may be preferable to keep things that way (or instead also
beep if curwin == prevwin, if that's preferred).
- After more digging, I found cases in win_free_mem, enter_tabpage,
aucmd_restbuf and qf_open_new_cwindow where curwin == prevwin is possible
(many of them from autocommands). Others probably exist too, especially in
places where curwin is changed temporarily.
fixes: #14047
closes: #14186
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Duplicate assignment in f_getregion().
Solution: Remove the duplicate assignment. Also improve getregion()
docs wording and fix an unrelated typo (zeertzjq)
closes: #14154
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: can only call getregion() for current buffer
Solution: Allow to retrieve selections from different buffers
(Shougo Matsushita)
closes: #14131
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: can't call internal methods with objects
Solution: Add support for empty(), len() and string() function
calls for objects (Yegappan Lakshmanan)
closes: #14129
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
- Mention the default selection behavior
- Remove useless sentence
- Correct description about space padding
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: getregion() can be improved (after v9.1.120)
Solution: change getregion() implementation to use pos as lists and
one optional {opt} dictionary (Shougo Matsushita)
Note: The following is a breaking change!
Currently, the getregion() function (included as of patch v9.1.120) takes
3 arguments: the first 2 arguments are strings, describing a position,
arg3 is the type string.
However, that is slightly inflexible, there is no way to specify
additional arguments. So let's instead change the function signature to:
getregion(pos1, pos2 [, {Dict}]) where both pos1 and pos2 are lists.
This is slightly cleaner, and gives us the flexibility to specify
additional arguments as key/value pairs to the optional Dict arg.
Now it supports the "type" key to specify the selection type
(characterwise, blockwise or linewise) and now in addition one can also
define the selection type, independently of what the 'selection' option
actually is.
Technically, this is a breaking change, but since the getregion()
Vimscript function is still quite new, this should be fine.
closes: #14090
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
methods
Problem: Vim9: need more test for exists()
Solution: Add test for exists() with class/objct variables and methods
(Yegappan Lakshmanan)
closes: #14088
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14080
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Internal error when passing mark in another buffer to
getregion().
Solution: Don't allow marks in another buffer (zeertzjq)
closes: #14076
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Internal error when passing mark in another buffer to getregion()
|
|
While adding to the documentation, also mention the rolled-back key-translation
strategy in version9.txt
closes: #14069
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Some minor issues with the getregion() function
Solution: Fix examples in the help, use OP_NOP op_type and MBLOCK
as motion_type in f_getreg(), update vim syntax to
for getregion() (Maxim Kim)
```
:xnoremap <CR>
\ <Cmd>echow getregion('v', '.', mode())<CR>
```
`echo` while in visual mode has no visible effect, thus people trying
example might be frustrated as it looks like nothing happens.
So the option is to change it to `echow` or `echom`.
With `echom` it is again has no visible effect but one can at least inspect `:messages`.
On the other hand `echow` showes selected text in a popup window.
```
Can also be used as a |method|: >
'.'->getregion("'a', 'v')
```
Here is the typo, which makes example invalid, should be `("'a", ...`
closes: #14064
Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: hard to get visual region using Vim script
Solution: Add getregion() Vim script function
(Shougo Matsushita, Jakub Łuczyński)
closes: #13998
closes: #11579
Co-authored-by: =?UTF-8?q?Jakub=20=C5=81uczy=C5=84ski?= <doubleloop@o2.pl>
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: win_splitmove fires WinNewPre and possibly WinNew when moving
windows, even though no new windows are created.
Solution: don't fire WinNew and WinNewPre when inserting an existing
window, even if it isn't the current window. Improve the
accuracy of related documentation. (Sean Dewar)
Likewise, before this patch, WinClosed was not fired anyway (even for :wincmd
H/J/K/L, which also didn't fire WinNew, but did still fire WinNewPre), despite
documentation saying windows are "closed". Note that :wincmd T actually indeed
works by creating a new window (and closing the old one), unlike the others.
This also fixes issues where WinNewPre is fired when split-moving while curwin
doesn't yet have a frame or entry in the window list, causing many things to not
work (it's not considered valid at that point). This was guaranteed when using
:wincmd H/J/K/L.
Because WinNewPre is no longer fired when split-moving, this makes restoring the
previous window layout on failure easier, as we can be sure that frames are not
resized from WinNewPre autocommands if win_split_ins fails. This allows us to
use a different strategy in the following commit.
--
In my opinion, this leaves questions about the current usefulness of WinNewPre.
A motivation described in #10635 states how creating a new window can steal room
from other windows, and how WinNewPre will be useful for detecting that, but
this is also true when inserting an existing window, which now doesn't fire it.
Maybe the autocommand should be changed to have a better name?
There are also other issues I found with the current implementation of WinNewPre
that need addressing:
- it allows switching windows and tabpages, which can cause incorrect windows to
be split/moved, and big problems when switching tabpages.
- it fires before win_split_ins checks for room, before it makes any changes to
window sizes or before it considers allocating a new window. This should be
changed or documented.
I hope to address some of this stuff in a different PR, if possible.
related: #14038
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Not able to use diff() with 'diffexpr'
(rickhowe, after v9.1.0096)
Solution: Use a default context length of 0, update diff() help text,
add a test for using diff() with 'diffexpr'
(Yegappan Lakshmanan)
closes: #14013
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: diff() function uses 'diffexpr'
(rickhowe)
Solution: Make diff() always use internal diff(), add support for
unified diff context length, sort diff() options in help
(Yegappan Lakshmanan)
fixes: #13989
closes: #14010
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: unexpected error for modifying final list using += operator
(Ernie Rael)
Solution: Allow List value modification of a final variable using +=
operator
(Yegappan Lakshmanan)
fixes: #13745
fixes: #13959
closes: #13962
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Need a diff() Vim script function
Solution: Add the diff() Vim script function using the
xdiff internal diff library, add support for
"unified" and "indices" mode.
(Yegappan Lakshmanan)
fixes: #4241
closes: #12321
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: No Wayland support
Solution: Add Wayland UI support
(lilydjwg)
closes: #9639
Signed-off-by: lilydjwg <lilydjwg@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cannot map Super Keys in GTK UI
(Casey Tucker)
Solution: Enable Super Key mappings in GTK using <D-Key>
(Casey Tucker)
As a developer who works in both Mac and Linux using the same keyboard,
it can be frustrating having to remember different key combinations or
having to rely on system utilities to remap keys.
This change allows `<D-z>` `<D-x>` `<D-c>` `<D-v>` etc. to be recognized
by the `map` commands, along with the `<D-S-...>` shifted variants.
```vimrc
if has('gui_gtk')
nnoremap <D-z> u
nnoremap <D-S-Z> <C-r>
vnoremap <D-x> "+d
vnoremap <D-c> "+y
cnoremap <D-v> <C-R>+
inoremap <D-v> <C-o>"+gP
nnoremap <D-v> "+P
vnoremap <D-v> "-d"+P
nnoremap <D-s> :w<CR>
inoremap <D-s> <C-o>:w<CR>
nnoremap <D-w> :q<CR>
nnoremap <D-q> :qa<CR>
nnoremap <D-t> :tabe<CR>
nnoremap <D-S-T> :vs#<CR><C-w>T
nnoremap <D-a> ggVG
vnoremap <D-a> <ESC>ggVG
inoremap <D-a> <ESC>ggVG
nnoremap <D-f> /
nnoremap <D-g> n
nnoremap <D-S-G> N
vnoremap <D-x> "+x
endif
```
closes: #12698
Signed-off-by: Casey Tucker <dctucker@hotmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: E95 is possible if a buffer called "[Command Line]" already
exists when opening the cmdwin. This can also happen if the
cmdwin's buffer could not be deleted when closing.
Solution: Un-name the cmdwin buffer, and give it a special name instead,
similar to what's done for quickfix buffers and for unnamed
prompt and scratch buffers. As a result, BufFilePre/Post are
no longer fired when opening the cmdwin. Add a "command" key
to the dictionary returned by getbufinfo() to differentiate
the cmdwin buffer instead. (Sean Dewar)
NOTE: This is technically a breaking change... maybe this needs a different
solution? (Or maybe this issue can be ignored...)
A GitHub search reveals some plugins expect the old behaviour. However, many of
those plugins also do not seem to account for the string being translated, so
they are subtly broken anyway (not withstanding the fact that you can call any
old buffer "[Command Line]" too...)
closes: #12819
Signed-off-by: Sean Dewar <seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim is missing a foreach() func
Solution: Implement foreach({expr1}, {expr2}) function,
which applies {expr2} for each item in {expr1}
without changing it (Ernie Rael)
closes: #12166
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Lifepillar <lifepillar@lifepillar.me>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Keymap completion is not available
Solution: Add keymap completion (Doug Kearns)
Add keymap completion to the 'keymap' option, user commands and builtin
completion functions.
closes: #13692
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cannot easily get the list of matches
Solution: Add the matchstrlist() and matchbufline() Vim script
functions (Yegappan Lakshmanan)
closes: #13766
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Need a new release
Solution: Release Vim 9.1
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #13753
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #13654
|
|
Problem: Vim9: type documentation out-dated
Solution: Update documentation, fix typo in type alias
definition
closes: #13684
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: instanceof() should use varargs as second arg
Solution: Modify `instanceof()` to use varargs instead of list
Modify `instanceof()` to use varargs instead of list
Valid `instanceof()` arguments are `type`s. A `type` is not a value;
it cannot be added to a list.
This change is non-compatible with the current usage of instanceof;
but instanceof is relatively new and it's a trivial change.
fixes: #13421
closes: #13644
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: No test for mode() when executing Ex commands
Solution: Add some test cases and simplify several other test cases.
Also add a few more test cases for ModeChanged.
closes: #13588
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cannot detect overstrike mode in Cmdline mode
Solution: Make mode() return "cr" for overstrike
closes: #13569
Signed-off-by: Sam-programs <None>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
* Fix typos in several documents
* Update runtime/doc/terminal.txt
Co-authored-by: K.Takata <kentkt@csc.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|