Age | Commit message (Collapse) | Author |
|
- Differentiate between :substitute and substitute(), fixes #13883.
- Match all allowed :substitute delimiters.
- Remove leading context from :substitute matches.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: <Del> in cmdline mode doesn't delete composing chars
Solution: Use mb_head_off() and mb_ptr2len() (zeertzjq)
closes: #14095
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14092
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
methods
Problem: Vim9: need more test for exists()
Solution: Add test for exists() with class/objct variables and methods
(Yegappan Lakshmanan)
closes: #14088
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14062
Signed-off-by: Matt Ellis <m.t.ellis@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Insufficient testing for 'delcombine'.
Solution: Add test for both Normal and Insert modes without Arabic.
(zeertzjq)
closes: #14086
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Test_term_gettitle() is flaky on MacOS 14 and Github runners
Solution: Skip the test on Github CI
closes: #14085
It fails with this: '^\\[No Name\\] - VIM\\d*$' does not match 'e] - VIM'
It is not clear why term_gettitle() only get's the last part of the
expected title (perhaps there is a Carriage return in there or the
terminal window is too small?)
So let's just skip this test for now.
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: font ligatures don't render correctly in the Win32 GUI-version
of gvim even when set rop=type:directx is used. Setting
guiligatures also doesn't make any difference. This leads to
broken font ligatures when the cursor passes through them. It
does not recover from this, and they remain broken until you
re-render the whole buffer (e.g. by using Ctrl+L).
Solution: the problem is that we only re-draw the current and previous
character in gui_undraw_cursor() and only have the special case
for GTK when it comes to rendering ligatures. So let's enable
gui_adjust_undraw_cursor_for_ligatures() to also happen for
Win32 GUI if guiligatures is setup correctly (all this does is
expand the range of gui_undraw_cursor() with ligature characters).
related: #9181
related: #12901
closes: #14084
Signed-off-by: Erik S. V. Jansson <caffeineviking@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: using "C" and 've=all' set, doesn't include composing chars
when changing a line, keeps the composing chars for whatever
is typed afterwards.
Solution: Use mb_head_off() and mb_ptr2len() instead of mb_tail_off().
(zeertzjq)
closes: #14083
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: buffer-completion code too complicated and does not always
find all matches (irisjae)
Solution: do not try to anchor pattern to beginning of line or
directory-separator, always return all matches
Note: we are considering the non-fuzzy buffer-matching here.
Currently, the buffer-completion code makes 2 attempts to match a
pattern against the list of available patterns. First try is to match
the pattern and anchor it to either the beginning of the file name or
at a directory-separator (// or \\).
When a match is found, Vim returns the matching buffers and does not try
to find a match anywhere within a buffer name. So if you have opened two
buffers like /tmp/Foobar.c and /tmp/MyFoobar.c using `:b Foo` will only
complete to the first filename, but not the second (the same happens
with `getcompletion('Foo', 'buffer')`).
It may make sense, that completion priorities buffer names at directory
boundaries, but it inconsistent, may cause confusion why a certain
buffer name is not completed when typing `:b Foo<C-D>` which returns
only a single file name and then pressing Enter (to switch to that
buffer), Vim will error with 'E93: More than one match for Foo').
Similar things may happen when wiping the /tmp/Foobar.c pattern and
afterwards the completion starts completing other buffers.
So let's simplify the code and always match the pattern anywhere in the
buffer name, do not try to favor matches at directory boundaries. This
is also simplifies the code a bit, we do not need to run over the list
of buffers several times, but only twice.
fixes #13894
closes: #14082
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: heap-use-after-free in win_splitmove if Enter/Leave
autocommands from win_split_ins immediately closes "wp".
Solution: check that "wp" is valid after win_split_ins.
(Sean Dewar)
closes: #14078
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Virtual text with text_wrap 'wrap' was effectively being
truncated by a break conditional on the EOL list character
being added to the screen line. (BigPeet)
Solution: Remove the condition that was leading to the early break and
instead fix a similar but incorrectly written outer condition
that checks if there is more to add at the end of the screen
line. (Dylan Thacker-Smith)
Also, related:
- update comment in win_line()
- remove no longer necessary at_end_str variable in win_line()
fixes: #12725
closes: #14079
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14080
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
dragonish <no.web.developer@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
rpm-4.19.0 added a new SourceLicense tag. It is used at the same place
as License tag.
This patch adds the new tag name into a Vim syntax file to be
highligted the same way as the License tag. Note that it has to be
defined in the syntax file before Source\d* regexp. Otherwise it's not
recognized by Vim.
Signed-off-by: Petr Písař <ppisar@redhat.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: win_gotoid() checks for textlock and other things when switching
to a window that is already current (after v9.1.0119)
Solution: return early with success when attempting to switch to curwin
(Sean Dewar)
Other potential causes of E565 from win_gotoid after v9.1.0119 should be
correct. Plugins can consider using win_execute() instead if they wish to
temporarily switch windows during textlock.
fixes: #14073
closes: #14074
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Naming a non-pointer variable "oap" is strange.
Solution: Rename it to "oa". Also prevent using freed memory in case of
memory allocation failure. (zeertzjq)
closes: #14075
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Internal error when passing mark in another buffer to
getregion().
Solution: Don't allow marks in another buffer (zeertzjq)
closes: #14076
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Internal error when passing mark in another buffer to getregion()
|
|
Fixes issue #7876
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Nick Hanley <nicholasjhanley@gmail.com>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: unused init of text_prop_idxs in win_line
Solution: Remove it, fix typo
(Dylan Thacker-Smith)
Later use of text_prop_idxs treats it as empty, incrementing
text_props_active as new elements are added to this array, so remove
this unused conditional initialization when text_props_active is 0.
closes: #14063
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
overlap
Problem: Virtual text with text_align 'right'/'below' wasn't being
used when a non-virtual text property overlaps with the end of
the line. This was because the non-virtual text property had a
higher priority, preventing the virtual text from being used.
Solution: Fix the sorting of text properties so virtual text properties
have a higher priority than non-virtual text properties.
(Dylan Thacker-Smith)
related: #14063
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
While adding to the documentation, also mention the rolled-back key-translation
strategy in version9.txt
closes: #14069
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: MS-Windows: system() may deadlock when calling binaries that
expect stdin
Solution: Ignore the SHELL_EXPAND flag
(GuyBrush)
This happens on binaries that expect stdin. For example:
:echo system("xxd")
will cause a deadlock.
SHELL_EXPAND is a flag devoted to support the linux implementation of
the backtick-expansion mechanism.
On linux backtic-expansion relies in the function mch_expand_wildchars()
(os_unix.c) that delegates on each specific shell (bash, sh, csh, zsh)
the expansion. Basically it composes a shell command that does the
expansion and redirects the output to a file and call_shell() it. On
windows backtick-expansion is performed by Vim itself.
On linux SHELL_EXPAND modifies how mch_call_shell_fork() (os_unix.c)
works. This function:
- relies on posix fork() to spawn a child process to execute a
external command.
- Child and parent process communicate using pipes (or pseudoterminal
if available).
User input (type ahead content) is processed in a loop only if
!(SHELL_EXPAND || SHELL_COOKED).
Though signals are used to detect Ctrl-C in all cases (the input
loop is not necessary to interrupt the function).
In the backtick-expansion the external command is the shell command
that provides the expansion. For the child redirection:
- SHELL_EXPAND replaces stdin, stdout & stderr to /dev/null. This is
why the shell command composed includes redirection (otherwise
output would be lost).
- !SHELL_EXPAND replaces stdin, stdout & stderr with the parent
created pipes (or pseudoterminal).
Note that the use of SIGINT signal prevents mch_call_shell_fork()
from hanging vim.
On Windows mch_system_piped() (os_win32.c) (which is only used when the
GUI is running) mimics mch_call_shell_fork() (os_unix.c).
Win32 lacks fork() and relies on CreateProcessW() and only has pipe
support (not pseudoterminal) which makes the implementation much
different.
But, the key idea is that windows lacks signals, the OS provides support
for console apps but gvim is not one. The only way of detecting a Ctrl-C
is actually processing user input (type ahead content). By ignoring the
user input under SHELL_EXPAND the function can hang gvim.
Ignoring SHELL_EXPAND flag has no consequence in Windows because as
mentioned above it is only meaningful in linux.
closes: #13988
Signed-off-by: GuyBrush <miguel.barro@live.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Some minor issues with the getregion() function
Solution: Fix examples in the help, use OP_NOP op_type and MBLOCK
as motion_type in f_getreg(), update vim syntax to
for getregion() (Maxim Kim)
```
:xnoremap <CR>
\ <Cmd>echow getregion('v', '.', mode())<CR>
```
`echo` while in visual mode has no visible effect, thus people trying
example might be frustrated as it looks like nothing happens.
So the option is to change it to `echow` or `echom`.
With `echom` it is again has no visible effect but one can at least inspect `:messages`.
On the other hand `echow` showes selected text in a popup window.
```
Can also be used as a |method|: >
'.'->getregion("'a', 'v')
```
Here is the typo, which makes example invalid, should be `("'a", ...`
closes: #14064
Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Eric Pruitt <eric.pruitt@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: infinite loop in win_update with 'smoothscroll' set when
window width is equal to textoff, or signed integer overflow
if smaller.
Solution: don't revalidate wp->w_skipcol in that case, as no buffer text
is being shown. (Sean Dewar)
Don't instead reset w_skipcol; that would lose the scroll position
within the line, which may be undesirable if the window is made wider
later.
Also include changes from the splitmove PR #14042 that I (in my infinite
Git wisdom) forgot to commit. This includes a change to
Test_window_split_no_room to ensure it doesn't fail for some screen
sizes.
Move Test_smoothscroll_in_zero_width_window to test_scroll_opt.vim, as
that file feels more appropriate.
closes: #14068
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: hard to get visual region using Vim script
Solution: Add getregion() Vim script function
(Shougo Matsushita, Jakub Łuczyński)
closes: #13998
closes: #11579
Co-authored-by: =?UTF-8?q?Jakub=20=C5=81uczy=C5=84ski?= <doubleloop@o2.pl>
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: can switch windows while textlocked via f_win_gotoid and
f_win_splitmove (which also allows switching in the cmdwin).
Solution: Check text_or_buf_locked in f_win_splitmove()
(Sean Dewar)
While at it, call text_or_buf_locked() in f_win_gotoid() instead of
testing for cmdwin_type() (which text_buf_locked() does and
in addition will also verify that the buffer is not locked).
closes: #14042
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: saving and restoring all frames to split-move is overkill now
that WinNewPre is not fired when split-moving.
Solution: defer the flattening of frames until win_split_ins begins
reorganising them, and attempt to restore the layout by
undoing our changes. (Sean Dewar)
This also means we no longer must allocate.
related: #14042
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: win_splitmove fires WinNewPre and possibly WinNew when moving
windows, even though no new windows are created.
Solution: don't fire WinNew and WinNewPre when inserting an existing
window, even if it isn't the current window. Improve the
accuracy of related documentation. (Sean Dewar)
Likewise, before this patch, WinClosed was not fired anyway (even for :wincmd
H/J/K/L, which also didn't fire WinNew, but did still fire WinNewPre), despite
documentation saying windows are "closed". Note that :wincmd T actually indeed
works by creating a new window (and closing the old one), unlike the others.
This also fixes issues where WinNewPre is fired when split-moving while curwin
doesn't yet have a frame or entry in the window list, causing many things to not
work (it's not considered valid at that point). This was guaranteed when using
:wincmd H/J/K/L.
Because WinNewPre is no longer fired when split-moving, this makes restoring the
previous window layout on failure easier, as we can be sure that frames are not
resized from WinNewPre autocommands if win_split_ins fails. This allows us to
use a different strategy in the following commit.
--
In my opinion, this leaves questions about the current usefulness of WinNewPre.
A motivation described in #10635 states how creating a new window can steal room
from other windows, and how WinNewPre will be useful for detecting that, but
this is also true when inserting an existing window, which now doesn't fire it.
Maybe the autocommand should be changed to have a better name?
There are also other issues I found with the current implementation of WinNewPre
that need addressing:
- it allows switching windows and tabpages, which can cause incorrect windows to
be split/moved, and big problems when switching tabpages.
- it fires before win_split_ins checks for room, before it makes any changes to
window sizes or before it considers allocating a new window. This should be
changed or documented.
I hope to address some of this stuff in a different PR, if possible.
related: #14038
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: win_split_ins has no check for E36 when moving an existing
window
Solution: check for room and fix the issues in f_win_splitmove()
(Sean Dewar)
win_split_ins has no check for E36 when moving an existing window,
allowing for layouts with many overlapping zero-sized windows to be
created (which may also cause drawing issues with tablines and such).
f_win_splitmove also has some bugs.
So check for room and fix the issues in f_win_splitmove. Handle failure
in the two relevant win_split_ins callers by restoring the original
layout, and factor the common logic into win_splitmove.
Don't check for room when opening an autocommand window, as it's a
temporary window that's rarely interacted with or drawn anyhow, and is
rather important for some autocommands.
Issues fixed in f_win_splitmove:
- Error if splitting is disallowed.
- Fix heap-use-after-frees if autocommands fired from switching to "targetwin"
close "wp" or "oldwin".
- Fix splitting the wrong window if autocommands fired from switching to
"targetwin" switch to a different window.
- Ensure -1 is returned for all errors.
Also handle allocation failure a bit earlier in make_snapshot (callers,
except win_splitmove, don't really care if a snapshot can't be made, so
just ignore the return value).
Note: Test_smoothscroll_in_zero_width_window failed after these changes with
E36, as it was using the previous behaviour to create a zero-width window.
I've fixed the test such that it fails with UBSAN as expected when v9.0.1367 is
reverted (and simplified it too).
related: #14042
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Modula-2 files with a specified priority are not detected.
Solution: Match the priority syntax in module header lines when
performing heuristic content detection.
Disable the :defcompile debug line. This was accidentally left enabled
in commit 68a8947.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: rhysd <lin90162@yahoo.co.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
command (#14050)
With the arrival of Vim9 classes, the syntax must allow for
_new_ constructors; multiple constructor definitions are
supported for a class, provided distinct suffix-names are
used. Currently, the defined constructors match either
vimCommand or vimFunctionError (for any newBar).
For example:
------------------------------------------------------------
vim9script
class Foo
def new()
enddef
def newBar()
enddef
endclass
------------------------------------------------------------
Since every constructor is required to bear a lower-cased
_new_ prefix name, it should suffice to distinguish them
from functions, and so there are no new highlight or syntax
groups introduced.
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: h-east <h.east.727@gmail.com>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Using freed memory with full tag stack and user data
(Konstantin Khlebnikov)
Solution: Clear the user data pointer of the newest entry.
(zeertzjq, Konstantin Khlebnikov)
fixes: neovim/neovim#27498
closes: #14053
Co-authored-by: Konstantin Khlebnikov koct9i@gmail.com
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Konstantin Khlebnikov koct9i@gmail.com
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: h-east <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Setting some options changes curswant unnecessarily.
Solution: Add a P_HLONLY flag that prevents changing curswant.
(zeertzjq)
closes: #14044
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Commit 103f1dfb7df350650a5d7caadb0364bd79e9d25b forgot to update the
"Last Change:" header. So update it now.
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
While at it, also do the unmap only if a specific key has been mapped.
There are some keys that are only selectively mapped and it would cause
an error if we are trying to unmap such a key (e.g. z when your
foldmethod is not manual).
fixes: #14040
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: duplicate code when cleaning undo stack
Solution: refactor undo cleanup into a single public function
related: #13928
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: When the quickfix buffer has been modified an autocommand
may invalidate the undo stack (kawarimidoll)
Solution: When clearing the quickfix buffer, also wipe the undo stack
fixes: #13905
closes: #13928
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
The '*.bats' file type is for Bash Automated Testing System (BATS)
scripts. BATS scripts are Bash with a special '@test' extension but they
otherwise work with Vim's bash filetype.
See https://github.com/bats-core/bats-core
closes: #14039
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
The 'Config.in' file type is for Buildroot configuration files.
Buildroot Config.in files use the same Kconfig backend as the Linux
kernel's Kconfig files.
Buildroot also has other filename variants that follow "Config.in.*",
they are used to distinguish multiple Config.in files in the same
directory.
See https://buildroot.org/downloads/manual/manual.html#_literal_config_in_literal_file
closes: #14038
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #13873
Signed-off-by: Luca Saccarola <github.e41mv@aleeas.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: filetype: no support for its files
Solution: Add detection for *.its files as dts file type
(Brandon Maier)
The '*.its' file type is for U-Boot Flattened Image Trees (FIT) which
use the flattened devicetree format.
See https://github.com/u-boot/u-boot/blob/master/doc/usage/fit/source_file_format.rst#terminology
closes: #14037
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
These were included with the initial release of the syntax file for Vim
5 and were probably intended to allow for syn-region start/skip/end
patterns with a '!' or '+' delimiter. However, these cases are
currently handled by the vimSynRegPat group.
The removed patterns never match anywhere in the distributed runtime
files and it is believed that this is generally true.
closes: #14035
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|