Age | Commit message (Collapse) | Author |
|
Problem: X11 does not ignore smooth scroll event
(laniakea64)
Solution: Correctly ignore unwanted smooth scroll events on X11
(lilydjwg)
fixes #14578
closes: #14583
Signed-off-by: lilydjwg <lilydjwg@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: A few typos in test_xdg when testing gvimrc
Solution: Fix them (Diego Viola)
closes: #14584
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Patch v9.1.0338 fixed sourcing a script with import
Solution: Add test `import './file.vim' and verify it works with `:source`
so it does not regress (Ernie Rael)
closes: #14577
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: gvimrc not sourced from XDG_CONFIG_HOME (after v9.1.0327)
Solution: Also try to source from ~/.config/vim/gvimrc and
$XDG_CONFIG_HOME/vim/gvimrc (Maxim Kim)
fixes: #14567
closes: #14568
Signed-off-by: Maxim Kim <habamax@haba-debian.habamax>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Cursor wrong after using setcellwidth() in terminal
(mikoto2000)
Solution: output additional spaces, so the behaviour matches the GUI
(mikoto2000)
fixes: #14539
closes: #14540
Signed-off-by: mikoto2000 <mikoto2000@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Fix CUI `setcellwidths` characters draw behavior to same GUI behavior.
|
|
Problem: 'showcmd' is wrong for partial mapping with multibyte char,
and isn't very readable with modifyOtherKeys.
Solution: Decode multibyte char and merge modifiers into the char.
(zeertzjq)
This improves the following situations:
- Multibyte chars whose individual bytes are considered unprintable are
now shown properly in 'showcmd' area.
- Ctrl-W with modifyOtherKeys now shows ^W in 'showcmd' area.
The following situation may still need improvement:
- If the char is a special key or has modifiers that cannot be merged
into it, internal keycodes are shown in 'showcmd' area like before.
This applies to keys typed in Normal mode commands as well, and it's
hard to decide how to make it more readable due to the limited space
taken by 'showcmd', so I'll leave it for later.
closes: #14572
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: tests: test_taglist fails when 'helplang' contains non-english
Solution: Allow 1 or 2 tagfiles for now (Julio B)
related: #14312
closes: #14566
Signed-off-by: Julio B <julio.bacel@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: a few memory leaks are found
(LuMingYinDetect )
Solution: properly free the memory
Fixes the following problems:
- Memory leak in f_maplist()
fixes: #14486
- Memory leak in option.c
fixes: #14485
- Memory leak in f_resolve()
fixes: #14484
- Memory leak in f_autocmd_get()
related: #14474
- Memory leak in dict_extend_func()
fixes: #14477
fixes: #14238
closes: #14517
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Error with matchaddpos() and empty list
(@rickhow)
Solution: Return early for an empty list
fixes: #14525
closes: #14563
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: tests: xdg test uses screen dumps
Solution: Convert screen dump to normal test
(Yegappan Lakshmanan)
closes: #14564
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: import through symlinks not correctly handled
Solution: Check for script being a symlink but only once
(Ernie Rael)
closes: #14565
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Missing entry for XDG vimrc file in :version
Solution: Add 4th user vimrc entry to :version output
(Diego Viola)
related: #14182
closes: #14569
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: tests: typo in test_xdg
Solution: fix typo (Diego Viola)
closes: #14562
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
modifications with the goals of:
- simplifying structure by using group `cluster`s
- improving visual highlighting responsiveness by using `nextgroup`
- improving recursive wm-msg command highlighting
- separating command variants meant for runtime and for config only
closes: #14544
Signed-off-by: Josef Litoš <54900518+JosefLitos@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14550
Signed-off-by: Konfekt <Konfekt@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: String interpolation fails for List type
Solution: use implicit string(list) for string interpolation and :put =
(Yegappan Lakshmanan)
related: #14529
closes: #14556
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: No test for highlight behavior with 'ambiwidth'.
Solution: Add a screendump test for 'ambiwidth' with 'cursorline'.
(zeertzjq)
closes: #14554
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: tests: test_xdg fails on the appimage repo
Solution: compare only the last 30 right characters of $MYVIMRC
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: tests: some assert_equal() calls have wrong order of args
Solution: Correct the order (zeertzjq).
closes: #14555
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: make install does not install all files (Nick Jensen)
Solution: Adjust the Makefile rule to install and uninstall cargo and
rust directories (Matt Hammerly)
fixes: #14551
closes: #14552
closes: #14557
Signed-off-by: Matt Hammerly <hammerly.matt@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
closes: #14559
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: v9.1.0327 contains an unrelated change
Solution: Revert back $USR_VIMRC_FILE to $HOME instead of ~
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: String interpolation fails for Dict type
Solution: Support Dict data type properly, also support :put =Dict
(without having to convert it to string() first)
(Yegappan Lakshmanan)
fixes: #14529
closes: #14541
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: CI fails with t_?? test
Solution: use assert_match instead of assert_equal
and test only until t_xo, depending on system
there may be several more termcap codes coming
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: No support for using $XDG_CONFIG_HOME
Solution: optionally source $XDG_CONFIG_HOME/vim/vimrc
(Luca Saccarola)
fixes: #2034
closes: #14182
Signed-off-by: Luca Saccarola <github.e41mv@aleeas.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: filetype: some requirements files are not recognized
Solution: Detect '*-requirements.txt', 'constraints.txt',
'requirements.in', 'requirements/*.txt' and 'requires/*.txt'
as requirements filetype, include pip compiler, include
requirements filetype and syntax plugin
(Wu, Zhenyu, @raimon49)
closes: #14379
Co-authored-by: raimon <raimon49@hotmail.com>
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: filetype: CMakeCache.txt files not recognized
Solution: Detect 'CMakeCache.txt' files as cmakecache filetype,
include basic syntax script for cmakecache
(Wu, Zhenyu, @bfrg)
closes: #14384
Co-authored-by: bfrg <bfrg@users.noreply.github.com>
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Only match function folding start and end patterns at the start of a
line, excluding heredocs and :append/:change/:insert commands.
Fixes #14393
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
|
|
Problem: filetype: some json files are not recognized
Solution: Detect '.jscsrc' and '.vsconfig' as jsonc filetype
(Wu, Zhenyu)
See:
- https://github.com/microsoft/PowerToys/blob/main/.vsconfig
- https://jscs-dev.github.io/
closes: #14452
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
files (#14460)
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: filetype: cabal config files may not be recognized
Solution: Change filetype pattern to '*/{,.}cabal/config'
(Wu Zhenyu)
closes: #14498
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: shane.xb.qian <shane.qian@foxmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: filetype: some mail tools not recognized
Solution: Detect '.mbsncrc' as conf, '.msmtprc' as msmtp
and '.notmuch-config' as ini filetype
(Shane-XB-Qian)
closes: #14533
Signed-off-by: shane.xb.qian <shane.qian@foxmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: When used terminal with XON/XOFF flow control, vim tries to
still make CTRL-S mapping available, which results in severe
screen corruption, especially on large redraws, and even
spurious inputs (John Tsiombikas)
Solution: Disallow CTRL-S mapping if such terminal is recognized.
Don't remove IXON from the bitmask inversion.
(Anton Sharonov)
*** When started like this:
TERM=vt420 vim
:set termcap
shows "t_xon=y"
map <C-S> :echo "abc"<CR>
does nothing (after <C-S> output freezes and subsequent <C-Q>
unfreezes it)
*** When started like this:
TERM=xterm vim
:set termcap
shows "t_xon="
map <C-S> :echo "abc"<CR>
works (after <C-S> one see "abc" string echo-ed)
fixes: #12674
closes: #14542
Signed-off-by: Anton Sharonov <anton.sharonov@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
* runtime(java): Recognise non-ASCII identifiers
Also:
- Remove the already commented out and less general in its
definition javaFuncDef alternative.
- Stop recognising some bespoke {p,trace} debugging API.
Non-ASCII identifiers have been supported from the outset
of the Java language.
> An _identifier_ is an unlimited-length sequence of _Java
> letters_ and _Java digits_, the first of which must be a
> Java letter. An identifier cannot have the same spelling
> (Unicode character sequence) as a keyword . . . Boolean
> literal . . . or the null literal . . .
> . . . . . . . .
> Letters and digits may be drawn from the entire Unicode
> character set . . .
> . . . . . . . .
> A Java letter is a character for which the method
> Character.isJavaLetter . . . returns true. A Java
> letter-or-digit is a character for which the method
> Character.isJavaLetterOrDigit . . . returns true.
> . . . . . . . .
> The Java letters include . . . for historical reasons, the
> ASCII underscore (_) . . . and dollar sign ($) . . .
(Separate syntax tests will be written when particular parts
now touched will have been further improved.)
Reference:
https://javaalmanac.io/jdk/1.0/langspec.pdf [§3.8]
* Take on the maintenance of Java filetype and syntax files
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Wrong cursor position after using setcellwidths().
Solution: Invalidate cursor position in addition to redrawing.
(zeertzjq)
closes: #14545
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Using heredoc in string not tested with :execute.
Solution: Test with both :execute and execute() (zeertzjq).
closes: #14546
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
as we do on others like ubuntu
Signed-off-by: Philip H <47042125+pheiduck@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: filetype: translate shell config files are not recognized
Solution: Detect 'init.trans', 'translate-shell' and '.trans' files as
clojure (Wu, Zhenyu)
See: https://github.com/soimort/translate-shell/wiki/Configuration
closes: #14499
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: filetype: matplotlibrc files are not recognized
Solution: Detect 'matplotlibrc' file as yaml filetype
(Wu, Zhenyu)
See: https://matplotlib.org/stable/users/explain/customizing.html#the-matplotlibrc-file
closes: #14501
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Allow for syntax-based folding of Vim9 script legacy header regions.
This is enabled with the "H" flag of the g:vimsyn_folding config variable.
closes: #14530
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
|
|
Problem: filetype: some sh and confini files not recognized
Solution: Detect neofetch, '.xprofile', XDG-User-Dirs files,
paru and makepkg config files
(Wu, Zhenyu)
See:
- https://github.com/dylanaraps/neofetch/wiki/Customizing-Info#config-file-location
- https://www.freedesktop.org/wiki/Software/xdg-user-dirs/
closes: #14505
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: filetype: a few more dosini files are not recognized
Solution: Detect wakatime, reply config files, flatpak, nfs config files
and a few more python tools as dosini (or toml)
(Wu, Zhenyu)
Refer:
- https://packaging.python.org/en/latest/specifications/pypirc/
- https://jorisroovers.com/gitlint/latest/configuration/
- https://pylint.pycqa.org/en/latest/user_guide/usage/run.html#command-line-options
- https://docs.bpython-interpreter.org/en/latest/configuration.html
- https://mypy.readthedocs.io/en/stable/config_file.html#the-mypy-configuration-file
- https://black.readthedocs.io/en/stable/usage_and_configuration/the_basics.html#configuration-via-a-file
- https://github.com/wakatime/wakatime-cli?tab=readme-ov-file#usage
- https://metacpan.org/dist/Reply/view/bin/reply#-cfg-~/.replyrc
close: #14512
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Valid i3config syntax is highlighted as error.
Solution: Skip over line-breaks correctly.
Signed-off-by: Julio B <julio.bacel@gmail.com>
Signed-off-by: Josef Litoš <54900518+JosefLitos@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Vim9: Can define a class in a function
(Doug Kearns)
Solution: Give an error for a class defined in a function,
slightly reword some public error messages
(Yegappan Lakshmanan)
fixes: #13184
fixes: #13326
closes: #14537
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Signed-off-by: rhysd <lin90162@yahoo.co.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Crash when using heredoc with comment in command block.
Solution: Handle a newline more like the end of the line, fix coverity
warning (zeertzjq).
closes: #14535
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: heredocs are not supported for :commands
(@balki)
Solution: Add heredoc support
(Yegappan Lakshmanan)
fixes: #14491
closes: #14528
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Some config files are not recognized
Solution: Add some patterns for chktex, ripgreprc and ctags config
files.
See: https://www.nongnu.org/chktex/
See: https://github.com/BurntSushi/ripgrep/blob/master/GUIDE.md#configuration-file
See: https://docs.ctags.io/en/latest/option-file.html#order-of-loading-option-files
closes: #14506
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|
|
Problem: Filler lines not checked properly in get_scroll_overlap().
Solution: Add missing parentheses (zeertzjq).
The missing parentheses causes the second argument to diff_check_fill()
to always be 0 as it is the result of a comparison between a positive
integer and -1 (the value of BACKWARD), in which case diff_check_fill()
always returns 0 instead of the number of filler lines above a line.
It's very hard to add a test for this, because this mistake at most
leads to 2 screen lines of difference in scrolling behavior, and in
cases where it may indeed lead to a difference in behavior, neither
behavior achieves complete symmetry between CTRL-F and CTRL-B.
closes: #14527
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
|