diff options
35 files changed, 902 insertions, 296 deletions
diff --git a/runtime/doc/autocmd.txt b/runtime/doc/autocmd.txt index 40949bb1ec..c148455841 100644 --- a/runtime/doc/autocmd.txt +++ b/runtime/doc/autocmd.txt @@ -1,4 +1,4 @@ -*autocmd.txt* For Vim version 7.3. Last change: 2011 May 19 +*autocmd.txt* For Vim version 7.3. Last change: 2011 Aug 29 VIM REFERENCE MANUAL by Bram Moolenaar @@ -448,6 +448,9 @@ BufWriteCmd Before writing the whole buffer to a file. 'modified' if successful, unless '+' is in 'cpo' and writing to another file |cpo-+|. The buffer contents should not be changed. + When the command resets 'modified' the undo + information is adjusted to mark older undo + states as 'modified', like |:write| does. |Cmd-event| *BufWritePost* BufWritePost After writing the whole buffer to a file @@ -508,6 +511,7 @@ CursorMoved After the cursor was moved in Normal mode. not expect or that is slow. *CursorMovedI* CursorMovedI After the cursor was moved in Insert mode. + Not triggered when the popup menu is visible. Otherwise the same as CursorMoved. *EncodingChanged* EncodingChanged Fires off after the 'encoding' option has been diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt index 12d9504f3f..624b47da92 100644 --- a/runtime/doc/eval.txt +++ b/runtime/doc/eval.txt @@ -1,4 +1,4 @@ -*eval.txt* For Vim version 7.3. Last change: 2011 Jul 13 +*eval.txt* For Vim version 7.3. Last change: 2011 Aug 29 VIM REFERENCE MANUAL by Bram Moolenaar @@ -39,7 +39,7 @@ done, the features in this document are not available. See |+eval| and *E712* There are six types of variables: -Number A 32 bit signed number. |expr-number| *Number* +Number A 32 or 64 bit signed number. |expr-number| *Number* Examples: -123 0x10 0177 Float A floating point number. |floating-point-format| *Float* diff --git a/runtime/doc/gui.txt b/runtime/doc/gui.txt index 213f455cc6..b2e6a0c4cb 100644 --- a/runtime/doc/gui.txt +++ b/runtime/doc/gui.txt @@ -1,4 +1,4 @@ -*gui.txt* For Vim version 7.3. Last change: 2010 Nov 03 +*gui.txt* For Vim version 7.3. Last change: 2011 Jul 22 VIM REFERENCE MANUAL by Bram Moolenaar @@ -147,6 +147,15 @@ task bar with the 'guiheadroom' option. If you are running the X Window System, you can get information about the window Vim is running in with this command: > :!xwininfo -id $WINDOWID +< + *gui-IME* *iBus* +Input methods for international characters in X that rely on the XIM +framework, most notably iBus, have been known to produce undesirable results +in gVim. These may include an inability to enter spaces, or long delays +between typing a character and it being recognized by the application. + +One workaround that has been successful, for unknown reasons, is to prevent +gvim from forking into the background by starting it with the |-f| argument. ============================================================================== 2. Scrollbars *gui-scrollbars* diff --git a/runtime/doc/gui_w32.txt b/runtime/doc/gui_w32.txt index 7b60c3b4ac..16758b000d 100644 --- a/runtime/doc/gui_w32.txt +++ b/runtime/doc/gui_w32.txt @@ -1,4 +1,4 @@ -*gui_w32.txt* For Vim version 7.3. Last change: 2010 Dec 19 +*gui_w32.txt* For Vim version 7.3. Last change: 2011 Jul 23 VIM REFERENCE MANUAL by Bram Moolenaar @@ -137,6 +137,9 @@ options: And if there already is a gvim running: "Edit with existing gvim" -- edit the file with the running gvim +The "edit with existing Vim" entries can be disabled by adding an entry in the +registry under HKLM\Software\Vim\Gvim, named DisableEditWithExisting, and with +any value. *install-registry* You can add the "Edit with Vim" menu entry in an easy way by using the "install.exe" program. It will add several registry entries for you. diff --git a/runtime/doc/gui_x11.txt b/runtime/doc/gui_x11.txt index 6d16500c5f..1ae656e040 100644 --- a/runtime/doc/gui_x11.txt +++ b/runtime/doc/gui_x11.txt @@ -1,4 +1,4 @@ -*gui_x11.txt* For Vim version 7.3. Last change: 2010 Jul 20 +*gui_x11.txt* For Vim version 7.3. Last change: 2011 Sep 14 VIM REFERENCE MANUAL by Bram Moolenaar @@ -53,6 +53,8 @@ When using "gvim -f" and then ":gui", Vim will run in the foreground. The ":gui -b". "gvim --nofork" does the same as "gvim -f". + *E851* *E852* +When starting the GUI fails Vim will try to continue running in the terminal. If you want the GUI to run in the foreground always, include the 'f' flag in 'guioptions'. |-f|. diff --git a/runtime/doc/if_pyth.txt b/runtime/doc/if_pyth.txt index 43c435655e..03d24a5b86 100644 --- a/runtime/doc/if_pyth.txt +++ b/runtime/doc/if_pyth.txt @@ -1,4 +1,4 @@ -*if_pyth.txt* For Vim version 7.3. Last change: 2011 May 07 +*if_pyth.txt* For Vim version 7.3. Last change: 2011 Aug 19 VIM REFERENCE MANUAL by Paul Moore @@ -380,7 +380,7 @@ To work around such problems there are these options: *has-python* You can test what Python version is available with: > if has('python') - echo 'there is Pyton 2.x' + echo 'there is Python 2.x' elseif has('python3') echo 'there is Python 3.x' endif diff --git a/runtime/doc/indent.txt b/runtime/doc/indent.txt index 7767ce8911..9a4aaa79af 100644 --- a/runtime/doc/indent.txt +++ b/runtime/doc/indent.txt @@ -1,4 +1,4 @@ -*indent.txt* For Vim version 7.3. Last change: 2011 Jul 15 +*indent.txt* For Vim version 7.3. Last change: 2011 Sep 02 VIM REFERENCE MANUAL by Bram Moolenaar @@ -132,8 +132,8 @@ The 'cinoptions' option sets how Vim performs indentation. The value after the option character can be one of these (N is any number): N indent N spaces -N indent N spaces to the left - Ns N times 'shiftwidth spaces - -Ns N times 'shiftwidth spaces to the left + Ns N times 'shiftwidth' spaces + -Ns N times 'shiftwidth' spaces to the left In the list below, "N" represents a number of your choice (the number can be negative). When @@ -432,7 +432,7 @@ The examples below assume a 'shiftwidth' of 4. c3 c3 ) && c4; ) && c4; < - *cino-2* + *cino-w* wN When in unclosed parentheses and N is non-zero and either using "(0" or "u0", respectively, or using "U0" and the unclosed parentheses is the first non-white character in its line, line @@ -706,6 +706,43 @@ Indent for a continuation line: > let g:pyindent_continue = '&sw * 2' +R *ft-r-indent* + +Function arguments are aligned if they span for multiple lines. If you prefer +do not have the arguments of functions aligned, put in your |vimrc|: +> + let r_indent_align_args = 0 +< +All lines beginning with a comment character, #, get the same indentation +level of the normal R code. Users of Emacs/ESS may be used to have lines +beginning with a single # indented in the 40th column, ## indented as R code, +and ### not indented. If you prefer that lines beginning with comment +characters are aligned as they are by Emacs/ESS, put in your |vimrc|: +> + let r_indent_ess_comments = 1 +< +If you prefer that lines beginning with a single # are aligned at a column +different from the 40th one, you should set a new value to the variable +r_indent_comment_column, as in the example below: +> + let r_indent_comment_column = 30 +< +Any code after a line that ends with "<-" is indented. Emacs/ESS does not +indent the code if it is a top level function. If you prefer that the +Vim-R-plugin behaves like Emacs/ESS in this regard, put in your |vimrc|: +> + let r_indent_ess_compatible = 1 +< +Below is an example of indentation with and without this option enabled: +> + ### r_indent_ess_compatible = 1 ### r_indent_ess_compatible = 0 + foo <- foo <- + function(x) function(x) + { { + paste(x) paste(x) + } } +< + SHELL *ft-sh-indent* The amount of indent applied under various circumstances in a shell file can diff --git a/runtime/doc/index.txt b/runtime/doc/index.txt index bd9f3823e6..c01f1d0314 100644 --- a/runtime/doc/index.txt +++ b/runtime/doc/index.txt @@ -1,4 +1,4 @@ -*index.txt* For Vim version 7.3. Last change: 2011 Jan 04 +*index.txt* For Vim version 7.3. Last change: 2011 Aug 06 VIM REFERENCE MANUAL by Bram Moolenaar @@ -1261,7 +1261,7 @@ tag command action ~ |:k| :k set a mark |:keepalt| :keepa[lt] following command keeps the alternate file |:keepmarks| :kee[pmarks] following command keeps marks where they are -|:keepjumps| :keepj[jumps] following command keeps jumplist and marks +|:keepjumps| :keepj[umps] following command keeps jumplist and marks |:lNext| :lN[ext] go to previous entry in location list |:lNfile| :lNf[ile] go to last entry in previous file |:list| :l[ist] print lines diff --git a/runtime/doc/insert.txt b/runtime/doc/insert.txt index 4ee1c79b86..24a17d5240 100644 --- a/runtime/doc/insert.txt +++ b/runtime/doc/insert.txt @@ -1,4 +1,4 @@ -*insert.txt* For Vim version 7.3. Last change: 2010 Nov 10 +*insert.txt* For Vim version 7.3. Last change: 2011 Sep 14 VIM REFERENCE MANUAL by Bram Moolenaar @@ -1020,6 +1020,21 @@ On the second invocation the arguments are: The function must return a List with the matching words. These matches usually include the "a:base" text. When there are no matches return an empty List. + +In order to return more information than the matching words, return a Dict +that contains the List. The Dict can have these items: + words The List of matching words (mandatory). + refresh A string to control re-invocation of the function + (optional). + The only value currently recognized is "always", the + effect is that the function is called whenever the + leading text is changed. +Other items are ignored. + +For example, the function can contain this: > + let matches = ... list of words ... + return {'words': matches, 'refresh': 'always'} +< *complete-items* Each list item can either be a string or a Dictionary. When it is a string it is used as the completion. When it is a Dictionary it can contain these @@ -1040,9 +1055,10 @@ items: empty when non-zero this match will be added even when it is an empty string -All of these except 'icase' must be a string. If an item does not meet these -requirements then an error message is given and further items in the list are -not used. You can mix string and Dictionary items in the returned list. +All of these except 'icase', 'dup' and 'empty' must be a string. If an item +does not meet these requirements then an error message is given and further +items in the list are not used. You can mix string and Dictionary items in +the returned list. The "menu" item is used in the popup menu and may be truncated, thus it should be relatively short. The "info" item can be longer, it will be displayed in diff --git a/runtime/doc/map.txt b/runtime/doc/map.txt index 2ebf2ebc47..92e21668f0 100644 --- a/runtime/doc/map.txt +++ b/runtime/doc/map.txt @@ -1,4 +1,4 @@ -*map.txt* For Vim version 7.3. Last change: 2011 Jun 13 +*map.txt* For Vim version 7.3. Last change: 2011 Aug 19 VIM REFERENCE MANUAL by Bram Moolenaar @@ -228,7 +228,7 @@ text before the cursor and start omni completion when some condition is met. For abbreviations |v:char| is set to the character that was typed to trigger the abbreviation. You can use this to decide how to expand the {lhs}. You -you should not either insert or change the v:char. +should not either insert or change the v:char. Be very careful about side effects! The expression is evaluated while obtaining characters, you may very well make the command dysfunctional. @@ -544,6 +544,7 @@ construct can be used: <Char-123> character 123 <Char-033> character 27 <Char-0x7f> character 127 + <S-Char-114> character 114 ('r') shifted ('R') This is useful to specify a (multi-byte) character in a 'keymap' file. Upper and lowercase differences are ignored. diff --git a/runtime/doc/motion.txt b/runtime/doc/motion.txt index 2f635bc48b..ccf6898891 100644 --- a/runtime/doc/motion.txt +++ b/runtime/doc/motion.txt @@ -1,4 +1,4 @@ -*motion.txt* For Vim version 7.3. Last change: 2011 Jun 02 +*motion.txt* For Vim version 7.3. Last change: 2011 Jul 19 VIM REFERENCE MANUAL by Bram Moolenaar @@ -1017,8 +1017,6 @@ CTRL-O Go to [count] Older cursor position in jump list <Tab> or *CTRL-I* *<Tab>* CTRL-I Go to [count] newer cursor position in jump list (not a motion command). - In a |quickfix-window| it takes you to the position of - the error under the cursor. {not in Vi} {not available without the |+jumplist| feature} diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt index 3bfc05a24f..b256cb6fb9 100644 --- a/runtime/doc/options.txt +++ b/runtime/doc/options.txt @@ -1,4 +1,4 @@ -*options.txt* For Vim version 7.3. Last change: 2011 Jul 07 +*options.txt* For Vim version 7.3. Last change: 2011 Sep 09 VIM REFERENCE MANUAL by Bram Moolenaar @@ -4861,6 +4861,10 @@ A jump table for the options with a short description can be found at |Q_op|. written. A ":set nomodified" command also resets the original values to the current values and the 'modified' option will be reset. + This option is not set when a change is made to the buffer as the + result of a BufNewFile, BufRead/BufReadPost, BufWritePost, + FileAppendPost or VimLeave autocommand event. See |gzip-example| for + an explanation. When 'buftype' is "nowrite" or "nofile" this option may be set, but will be ignored. @@ -5898,8 +5902,11 @@ A jump table for the options with a short description can be found at |Q_op|. "bash.exe -c ls" or "command.com /c dir". For the MS-DOS-like systems, the default is set according to the value of 'shell', to reduce the need to set this option by the user. It's not used for - OS/2 (EMX figures this out itself). See |option-backslash| about - including spaces and backslashes. See |dos-shell|. + OS/2 (EMX figures this out itself). + On Unix it can have more than one flag. Each white space separated + part is passed as an argument to the shell command. + See |option-backslash| about including spaces and backslashes. + Also see |dos-shell| for MS-DOS and MS-Windows. This option cannot be set from a |modeline| or in the |sandbox|, for security reasons. diff --git a/runtime/doc/os_vms.txt b/runtime/doc/os_vms.txt index 81d184189f..6fc07694e5 100644 --- a/runtime/doc/os_vms.txt +++ b/runtime/doc/os_vms.txt @@ -1,4 +1,4 @@ -*os_vms.txt* For Vim version 7.3. Last change: 2010 Aug 16 +*os_vms.txt* For Vim version 7.3. Last change: 2011 Aug 14 VIM REFERENCE MANUAL @@ -38,9 +38,6 @@ You can download the Vim source code by ftp from the official Vim site: Or use one of the mirrors: ftp://ftp.vim.org/pub/vim/MIRRORS -You will need both the Unix and Extra archives to build vim.exe for VMS. -For using Vim's full power you will need the runtime files as well. - You can download precompiled executables from: http://www.polarhome.com/vim/ ftp://ftp.polarhome.com/pub/vim/ @@ -75,7 +72,7 @@ See the file [.SRC]INSTALLVMS.TXT. 4. Problems *vms-problems* The code has been tested under Open VMS 6.2 - 8.2 on Alpha, VAX and IA64 -platforms with the DEC C compiler. It should work without bigger problems. +platforms with the DEC C compiler. It should work without big problems. If your system does not have some include libraries you can tune up in OS_VMS_CONF.H file. @@ -88,11 +85,11 @@ Also GTK, XPM library paths should be configured in MAKE_VMS.MMS Note: Under VAX it should work with the DEC C compiler without problems. The VAX C compiler is not fully ANSI C compatible in pre-processor directives -semantics, therefore you have to use a converter program what will do the lion +semantics, therefore you have to use a converter program that will do the lion part of the job. For detailed instructions read file INSTALLvms.txt -MMS_VIM.EXE is build together with VIM.EXE, but for XD.EXE you should -change to subdirectory and build it separately. +MMS_VIM.EXE is build together with VIM.EXE, but for XXD.EXE you should +change to a subdirectory and build it separately. CTAGS is not part of the Vim source distribution anymore, however the OpenVMS specific source might contain CTAGS source files as described above. @@ -184,9 +181,9 @@ You may want to create .vimrc and .gvimrc files in your home directory The easiest way is just rename example files. You may leave the menu file (MENU.VIM) and files vimrc and gvimrc in the original $VIM directory. It will -be default setup for all users, and for users it is enough just to have their -own additions or resetting in their home directory in files .vimrc and .gvimrc. -It should work without problems. +be the default setup for all users, and for users it is enough to just have +their own additions or resetting in their home directory in files .vimrc and +.gvimrc. It should work without problems. Note: Remember, system rc files (default for all users) don't have a leading ".". So, system rc files are: > @@ -200,7 +197,7 @@ and user customized rc files are: > sys$login:.vimrc sys$login:.gvimrc -You can check that everything is on the right place with the :version command. +You can check that everything is at the right place with the :version command. Example LOGIN.COM: > @@ -209,15 +206,15 @@ Example LOGIN.COM: > $ gv*im:== spawn/nowait/input=NLA0 mcr VIM:VIM.EXE -g -GEOMETRY 80x40 $ set disp/create/node=192.168.5.223/trans=tcpip -Note: This set-up should be enough, if you are working on standalone server or -clustered environment, but if you want to use Vim as internode editor in +Note: This set-up should be enough, if you are working on a standalone server or +clustered environment, but if you want to use Vim as an internode editor in DECNET environment, it will satisfy as well. You just have to define the "whole" path: > $ define VIM "<server_name>[""user password""]::device:<path>" $ vi*m :== "mcr VIM:VIM.EXE" -As for example: > +For example: > $ define VIM "PLUTO::RF10:[UTIL.VIM]" $ define VIM "PLUTO""ZAY mypass""::RF10:[UTIL.VIM]" ! if passwd required @@ -300,12 +297,12 @@ For more information type $help set disp in VMS prompt. 4) If you are working on MS-Windows or some other non X/Window environment you need to set up one X server and run Vim as in point 2. - For MS-Windows there are available free X servers as MIX , Omni X etc., + For MS-Windows there are available free X servers as MIX, Omni X etc., as well as excellent commercial products as eXcursion or ReflectionX with built-in DEC support. Please note, that executables without GUI are slightly faster during startup -then with enabled GUI in character mode. Therefore, if you do not use GUI +than with enabled GUI in character mode. Therefore, if you do not use GUI features, it is worth to choose non GUI executables. ============================================================================== @@ -326,8 +323,8 @@ features, it is worth to choose non GUI executables. 8.12 diff-mode 8.13 Allow '$' in C keywords 8.14 VIMTUTOR for beginners -8.15 Slow start in console mode issue -8.16 Common VIM directory - different architectures +8.15 Slow start in console mode issue +8.16 Common VIM directory - different architectures 8.1 Backspace/delete @@ -360,7 +357,7 @@ number, try these settings. > :set nowritebackup " does not have any purpose on VMS. It's the " default. -Recovery is working perfect as well from the default swap file. +Recovery is working perfectly as well from the default swap file. Read more with :help swapfile (Claude Marinier <ClaudeMarinier@xwavesolutions.com> Vim 5.5, Zoltan Arpadffy @@ -386,7 +383,7 @@ Note: You may use <,> brackets as well (device:<path>file.ext;version) as rf10:<user.zay.work>test.c;1 (David Elins <delins@foliage.com>, Jerome Lauret -<JLAURET@mail.chem.sunysb.edu> Vim 5.6 ) +<JLAURET@mail.chem.sunysb.edu> Vim 5.6) 8.5 Remote host invocation @@ -445,14 +442,14 @@ Terminal entry not found in termcap builtin_dumb defaulting to 'vt320' --- -The solution is to define default terminal name: > +The solution is to define the default terminal name: > $ ! unknown terminal name. Let us use vt320 or ansi instead. $ ! Note: it's case sensitive $ define term "vt320" -Terminals from VT100 to VT320 (as V300, VT220, VT200 ) do not need any extra -keyboard mappings. They should work perfect as they are, including arrows, +Terminals from VT100 to VT320 (as V300, VT220, VT200) do not need any extra +keyboard mappings. They should work perfectly as they are, including arrows, Ins, Del buttons etc., except Backspace in GUI mode. To solve it, add to .gvimrc: > @@ -465,8 +462,8 @@ your .vimrc file: > set ttyfast " set fast terminal -Note: if you're using Vim on remote host or through very slow connection, it's -recommended to avoid fast terminal option with: > +Note: if you're using Vim on remote host or through a very slow connection, it's +recommended to avoid the fast terminal option with: > set nottyfast " set terminal to slow mode @@ -483,8 +480,8 @@ special commands to execute executables: > OpenVMS users always have to be aware that the Vim command :! "just" drop them to DCL prompt. This feature is possible to use without any problem with all -DCL commands, but if we want to execute some program as XXD, CTAGS, JTAGS etc. -we're running into trouble if we follow the Vim documentation (see: help +DCL commands, but if we want to execute some programs such as XXD, CTAGS, JTAGS, +etc. we're running into trouble if we follow the Vim documentation (see: help xxd). Solution: Execute with the MC command and add the full path to the executable. @@ -534,7 +531,7 @@ Example: > $define SYS$PRINT HP5ANSI -You can print out whole buffer or just the marked area. +You can print out the whole buffer or just the marked area. More info under :help hardcopy (Zoltan Arpadffy, Vim 6.0c) @@ -561,16 +558,16 @@ will be confused after a window-resize. From 6.0 diff functionality has been implemented, but OpenVMS does not use GNU/Unix like diff therefore built in diff does not work. There is a simple solution to solve this anomaly. Install a Unix like diff -and Vim will work perfect in diff mode too. You just have to redefine your +and Vim will work perfectly in diff mode too. You just have to redefine your diff program as: > define /nolog diff <GNU_PATH>diff.exe Another, more sophisticated solution is described below (8.12 diff-mode) -There are some other programs as patch, make etc that may cause same problems. -At www.polarhome.com is possible to download an GNU package for Alpha and VAX -boxes that is meant to solve GNU problems on OpenVMS. -( Zoltan Arpadffy, Vim 6.1) +There are other programs such as patch, make etc that may cause the same +problems. At www.polarhome.com is possible to download an GNU package for +Alpha and VAX boxes that is meant to solve GNU problems on OpenVMS. +(Zoltan Arpadffy, Vim 6.1) 8.12 diff-mode @@ -632,7 +629,7 @@ You can now compare files in 4 ways: > 3. VIM diff: $ VIMDIFF <FILE1> <FILE2> 4. GVIM diff: $ GVIMDIFF <FILE1> <FILE2> -( Coen Engelbarts, Vim 6.1) +(Coen Engelbarts, Vim 6.1) 8.13 Allow '$' in C keywords @@ -653,35 +650,36 @@ Now word-based commands, e.g. the '*'-search-command and the CTRL-] tag-lookup, work on the whole identifier. (Ctags on VMS also supports '$' in C keywords since ctags version 5.1.) -( Coen Engelbarts, Vim 6.1) +(Coen Engelbarts, Vim 6.1) 8.14 VIMTUTOR for beginners -It exits VIMTUTOR.COM DCL script that can help Vim beginners to learn/make -first steps with Vim on OpenVMS. Depending of binary distribution you may -start it with: > +The VIMTUTOR.COM DCL script can help Vim beginners to learn/make their first +steps with Vim on OpenVMS. Depending of binary distribution you may start it +with: > @vim:vimtutor (Thomas.R.Wyant III, Vim 6.1) -8.14 Slow start in console mode issue +8.16 Slow start in console mode issue As GUI/GTK Vim works equally well in console mode, many administrators deploy those executables system wide. Unfortunately, on a remote slow connections GUI/GTK executables behave rather -slow when user wants to run Vim just in the console mode - because of X environment detection timeout. +slow when user wants to run Vim just in the console mode - because of X +environment detection timeout. Luckily, there is a simple solution for that. Administrators need to deploy both GUI/GTK build and just console build executables, like below: > |- vim73 |----- doc - |----- syntax + |----- syntax vimrc (system rc files) gvimrc - gvim.exe (the renamed GUI or GTK built vim.exe) - vim.exe (the console only executable) + gvim.exe (the renamed GUI or GTK built vim.exe) + vim.exe (the console only executable) Define system symbols like below in for ex in LOGIN.COM or SYLOGIN.COM: > @@ -692,7 +690,7 @@ Define system symbols like below in for ex in LOGIN.COM or SYLOGIN.COM: > $ gv*im :== spawn/nowait/input=NLA0 mcr VIM:GVIM.EXE -g -GEOMETRY 80x40 -Like this, users that do not have X environment and want to use Vim just in +Like this, users that do not have X environment and want to use Vim just in console mode can avoid performance problems. (Zoltan Arpadffy, Vim 7.2) @@ -714,8 +712,8 @@ View of Cluster from system ID 11655 node: TOR +---------------------------------+ It is convenient to have a common VIM directory but execute different -executables. -There are more solutions for this problem: +executables. +There are several solutions for this problem: Solution 1. All executables in the same directory with different names This is easily done with the following script that can be added @@ -769,7 +767,7 @@ GNU_TOOLS.ZIP package downloadable from http://www.polarhome.com/vim/ Version 7.3 - CTAGS 5.8 included - VMS compile warnings fixed - floating-point overflow warning corrected on VAX -- filepath completition corrected - too many chars were escaped in filename +- filepath completion corrected - too many chars were escaped in filename and shell commands - the following plugins are included into VMS runtime: genutils 2.4, multiselect 2.2, multvals 3.1, selectbuf 4.3, @@ -784,10 +782,10 @@ Version 7.3 Version 7.2 (2008 Aug 9) - VCF files write corrected - CTAGS 5.7 included -- corrected make_vms.mms (on VAX gave syntax error) +- corrected make_vms.mms (on VAX gave syntax error) Version 7.1 (2007 Jun 15) -- create TAGS file from menu +- create TAGS file from menu Version 7 (2006 May 8) - Improved low level char input (affects just console mode) diff --git a/runtime/doc/os_win32.txt b/runtime/doc/os_win32.txt index 92e85c77bc..0452bfae0a 100644 --- a/runtime/doc/os_win32.txt +++ b/runtime/doc/os_win32.txt @@ -1,4 +1,4 @@ -*os_win32.txt* For Vim version 7.3. Last change: 2011 May 28 +*os_win32.txt* For Vim version 7.3. Last change: 2011 Aug 14 VIM REFERENCE MANUAL by George Reilly @@ -316,11 +316,11 @@ A. When using :! to run an external command, you can run it with "start": > There are two optional arguments (see the next Q): /min the window will be minimized. /b" no console window will be opened - You can only one of these flags at a time. A second second one will be + You can use only one of these flags at a time. A second one will be treated as the start of the command. Q. How do I avoid getting a window for programs that I run asynchronously? -A. You have two possible solutions depending on what exactly do you want: +A. You have two possible solutions depending on what you want: 1) You may use the /min flag in order to run program in a minimized state with no other changes. It will work equally for console and GUI applications. @@ -328,7 +328,7 @@ A. You have two possible solutions depending on what exactly do you want: console window for them (GUI applications are not affected). But you should use this flag only if the application you run doesn't require any input. Otherwise it will get an EOF error because its input stream - (stdin) would be redirected to \\.\NUL (stdoud and stderr too). + (stdin) would be redirected to \\.\NUL (stdout and stderr too). Example for a console application, run Exuberant ctags: > :!start /min ctags -R . diff --git a/runtime/doc/pattern.txt b/runtime/doc/pattern.txt index 1c7 |