diff options
-rw-r--r-- | nsis/icons/enabled.bmp | bin | 0 -> 358 bytes | |||
-rw-r--r-- | runtime/doc/vim.man | 119 | ||||
-rw-r--r-- | runtime/synmenu.vim | 2 | ||||
-rw-r--r-- | src/Make_bc3.mak | 2 | ||||
-rw-r--r-- | src/Makefile | 2 |
5 files changed, 64 insertions, 61 deletions
diff --git a/nsis/icons/enabled.bmp b/nsis/icons/enabled.bmp Binary files differnew file mode 100644 index 0000000000..766e11a932 --- /dev/null +++ b/nsis/icons/enabled.bmp diff --git a/runtime/doc/vim.man b/runtime/doc/vim.man index f26c130009..9b70e7f96f 100644 --- a/runtime/doc/vim.man +++ b/runtime/doc/vim.man @@ -217,62 +217,65 @@ OPTIONS -O[N] Open N windows side by side. When N is omitted, open one window for each file. - -R Read-only mode. The 'readonly' option will be set. You + -p[N] Open N tab pages. When N is omitted, open one tab page for + each file. + + -R Read-only mode. The 'readonly' option will be set. You can still edit the buffer, but will be prevented from acci- - dently overwriting a file. If you do want to overwrite a - file, add an exclamation mark to the Ex command, as in - ":w!". The -R option also implies the -n option (see - below). The 'readonly' option can be reset with ":set + dently overwriting a file. If you do want to overwrite a + file, add an exclamation mark to the Ex command, as in + ":w!". The -R option also implies the -n option (see + below). The 'readonly' option can be reset with ":set noro". See ":help 'readonly'". - -r List swap files, with information about using them for + -r List swap files, with information about using them for recovery. - -r {file} Recovery mode. The swap file is used to recover a crashed - editing session. The swap file is a file with the same + -r {file} Recovery mode. The swap file is used to recover a crashed + editing session. The swap file is a file with the same filename as the text file with ".swp" appended. See ":help recovery". - -s Silent mode. Only when started as "Ex" or when the "-e" + -s Silent mode. Only when started as "Ex" or when the "-e" option was given before the "-s" option. -s {scriptin} - The script file {scriptin} is read. The characters in the - file are interpreted as if you had typed them. The same + The script file {scriptin} is read. The characters in the + file are interpreted as if you had typed them. The same can be done with the command ":source! {scriptin}". If the end of the file is reached before the editor exits, further characters are read from the keyboard. -T {terminal} - Tells Vim the name of the terminal you are using. Only - required when the automatic way doesn't work. Should be a - terminal known to Vim (builtin) or defined in the termcap + Tells Vim the name of the terminal you are using. Only + required when the automatic way doesn't work. Should be a + terminal known to Vim (builtin) or defined in the termcap or terminfo file. - -u {vimrc} Use the commands in the file {vimrc} for initializations. - All the other initializations are skipped. Use this to - edit a special kind of files. It can also be used to skip - all initializations by giving the name "NONE". See ":help + -u {vimrc} Use the commands in the file {vimrc} for initializations. + All the other initializations are skipped. Use this to + edit a special kind of files. It can also be used to skip + all initializations by giving the name "NONE". See ":help initialization" within vim for more details. - -U {gvimrc} Use the commands in the file {gvimrc} for GUI initializa- - tions. All the other GUI initializations are skipped. It - can also be used to skip all GUI initializations by giving - the name "NONE". See ":help gui-init" within vim for more + -U {gvimrc} Use the commands in the file {gvimrc} for GUI initializa- + tions. All the other GUI initializations are skipped. It + can also be used to skip all GUI initializations by giving + the name "NONE". See ":help gui-init" within vim for more details. - -V[N] Verbose. Give messages about which files are sourced and - for reading and writing a viminfo file. The optional num- + -V[N] Verbose. Give messages about which files are sourced and + for reading and writing a viminfo file. The optional num- ber N is the value for 'verbose'. Default is 10. - -v Start Vim in Vi mode, just like the executable was called - "vi". This only has effect when the executable is called + -v Start Vim in Vi mode, just like the executable was called + "vi". This only has effect when the executable is called "ex". -w {scriptout} - All the characters that you type are recorded in the file - {scriptout}, until you exit Vim. This is useful if you - want to create a script file to be used with "vim -s" or + All the characters that you type are recorded in the file + {scriptout}, until you exit Vim. This is useful if you + want to create a script file to be used with "vim -s" or ":source!". If the {scriptout} file exists, characters are appended. @@ -282,27 +285,27 @@ OPTIONS -x Use encryption when writing files. Will prompt for a crypt key. - -X Don't connect to the X server. Shortens startup time in a - terminal, but the window title and clipboard will not be + -X Don't connect to the X server. Shortens startup time in a + terminal, but the window title and clipboard will not be used. -y Start Vim in easy mode, just like the executable was called - "evim" or "eview". Makes Vim behave like a click-and-type + "evim" or "eview". Makes Vim behave like a click-and-type editor. - -Z Restricted mode. Works like the executable starts with + -Z Restricted mode. Works like the executable starts with "r". - -- Denotes the end of the options. Arguments after this will - be handled as a file name. This can be used to edit a + -- Denotes the end of the options. Arguments after this will + be handled as a file name. This can be used to edit a filename that starts with a '-'. --echo-wid GTK GUI only: Echo the Window ID on stdout. --help Give a help message and exit, just like "-h". - --literal Take file name arguments literally, do not expand wild- - cards. This has no effect on Unix where the shell expands + --literal Take file name arguments literally, do not expand wild- + cards. This has no effect on Unix where the shell expands wildcards. --noplugin Skip loading plugins. Implied by -u NONE. @@ -312,18 +315,18 @@ OPTIONS is given and the files are edited in the current Vim. --remote-expr {expr} - Connect to a Vim server, evaluate {expr} in it and print + Connect to a Vim server, evaluate {expr} in it and print the result on stdout. --remote-send {keys} Connect to a Vim server and send {keys} to it. --remote-silent - As --remote, but without the warning when no server is + As --remote, but without the warning when no server is found. --remote-wait - As --remote, but Vim does not exit until the files have + As --remote, but Vim does not exit until the files have been edited. --remote-wait-silent @@ -334,31 +337,31 @@ OPTIONS List the names of all Vim servers that can be found. --servername {name} - Use {name} as the server name. Used for the current Vim, + Use {name} as the server name. Used for the current Vim, unless used with a --remote argument, then it's the name of the server to connect to. --socketid {id} - GTK GUI only: Use the GtkPlug mechanism to run gvim in + GTK GUI only: Use the GtkPlug mechanism to run gvim in another window. --version Print version information and exit. ON-LINE HELP - Type ":help" in Vim to get started. Type ":help subject" to get help - on a specific subject. For example: ":help ZZ" to get help for the - "ZZ" command. Use <Tab> and CTRL-D to complete subjects (":help cmd- - line-completion"). Tags are present to jump from one place to another + Type ":help" in Vim to get started. Type ":help subject" to get help + on a specific subject. For example: ":help ZZ" to get help for the + "ZZ" command. Use <Tab> and CTRL-D to complete subjects (":help cmd- + line-completion"). Tags are present to jump from one place to another (sort of hypertext links, see ":help"). All documentation files can be viewed in this way, for example ":help syntax.txt". FILES /usr/local/lib/vim/doc/*.txt - The Vim documentation files. Use ":help doc-file-list" + The Vim documentation files. Use ":help doc-file-list" to get the complete list. /usr/local/lib/vim/doc/tags - The tags file used for finding information in the docu- + The tags file used for finding information in the docu- mentation files. /usr/local/lib/vim/syntax/syntax.vim @@ -378,7 +381,7 @@ FILES ~/.gvimrc Your personal gvim initializations. /usr/local/lib/vim/optwin.vim - Script used for the ":options" command, a nice way to + Script used for the ":options" command, a nice way to view and set options. /usr/local/lib/vim/menu.vim @@ -388,11 +391,11 @@ FILES Script to generate a bug report. See ":help bugs". /usr/local/lib/vim/filetype.vim - Script to detect the type of a file by its name. See + Script to detect the type of a file by its name. See ":help 'filetype'". /usr/local/lib/vim/scripts.vim - Script to detect the type of a file by its contents. + Script to detect the type of a file by its contents. See ":help 'filetype'". /usr/local/lib/vim/*.ps @@ -407,17 +410,17 @@ SEE ALSO AUTHOR Most of Vim was made by Bram Moolenaar, with a lot of help from others. See ":help credits" in Vim. - Vim is based on Stevie, worked on by: Tim Thompson, Tony Andrews and - G.R. (Fred) Walter. Although hardly any of the original code remains. + Vim is based on Stevie, worked on by: Tim Thompson, Tony Andrews and + G.R. (Fred) Walter. Although hardly any of the original code remains. BUGS Probably. See ":help todo" for a list of known problems. - Note that a number of things that may be regarded as bugs by some, are - in fact caused by a too-faithful reproduction of Vi's behaviour. And - if you think other things are bugs "because Vi does it differently", - you should take a closer look at the vi_diff.txt file (or type :help - vi_diff.txt when in Vim). Also have a look at the 'compatible' and + Note that a number of things that may be regarded as bugs by some, are + in fact caused by a too-faithful reproduction of Vi's behaviour. And + if you think other things are bugs "because Vi does it differently", + you should take a closer look at the vi_diff.txt file (or type :help + vi_diff.txt when in Vim). Also have a look at the 'compatible' and 'cpoptions' options. diff --git a/runtime/synmenu.vim b/runtime/synmenu.vim index 35f0f71eab..05ff118e19 100644 --- a/runtime/synmenu.vim +++ b/runtime/synmenu.vim @@ -123,7 +123,7 @@ an 50.30.160 &Syntax.DE.Diff :cal SetSyn("diff")<CR> an 50.30.170 &Syntax.DE.Digital\ Command\ Lang :cal SetSyn("dcl")<CR> an 50.30.180 &Syntax.DE.Dircolors :cal SetSyn("dircolors")<CR> an 50.30.190 &Syntax.DE.Django\ template :cal SetSyn("django")<CR> -an 50.30.200 &Syntax.DE.DNS/BIND\ zone :cal SetSyn("dns")<CR> +an 50.30.200 &Syntax.DE.DNS/BIND\ zone :cal SetSyn("bindzone")<CR> an 50.30.210 &Syntax.DE.DocBook.auto-detect :cal SetSyn("docbk")<CR> an 50.30.220 &Syntax.DE.DocBook.SGML :cal SetSyn("docbksgml")<CR> an 50.30.230 &Syntax.DE.DocBook.XML :cal SetSyn("docbkxml")<CR> diff --git a/src/Make_bc3.mak b/src/Make_bc3.mak index 461763088c..1aa82a351d 100644 --- a/src/Make_bc3.mak +++ b/src/Make_bc3.mak @@ -168,7 +168,7 @@ vim.cfg: Make_bc3.mak -Iproto -I$(INCLUDEPATH) -L$(LIBPATH) --DMSDOS$(SPAWND) +-DMSDOS;FEAT_TINY$(SPAWND) | vim.cfg test: diff --git a/src/Makefile b/src/Makefile index 86291b647e..027421431b 100644 --- a/src/Makefile +++ b/src/Makefile @@ -1708,7 +1708,7 @@ types.vim: $(TAGS_SRC) $(TAGS_INCL) # test check: $(MAKE) -f Makefile $(VIMTARGET) - -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ + -if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ fi cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) |