updated for version 7.0066v7.0066

36 files changed, 1720 insertions, 500 deletions

diff --git a/runtime/doc/arabic.txt b/runtime/doc/arabic.txt
index 2d961485ae..27990e023a 100644
--- a/runtime/doc/arabic.txt
+++ b/runtime/doc/arabic.txt
@@ -1,4 +1,4 @@
-*arabic.txt*	For Vim version 7.0aa.  Last change: 2004 Jun 09
+*arabic.txt*	For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL	  by Nadim Shaikli
@@ -24,7 +24,7 @@ Introduction
 ------------
 Arabic is a rather demanding language in which a number of special
 features are required.	Characters are right-to-left oriented and
-ought to appear as such on the screen (ie. from right to left).
+ought to appear as such on the screen (i.e. from right to left).
 Arabic also requires shaping of its characters, meaning the same
 character has a different visual form based on its relative location
 within a word (initial, medial, final or stand-alone).	Arabic also
@@ -60,7 +60,7 @@ o  Changing keyboard mapping and reverse insert modes using a single
 
 o  Toggling complete Arabic support via a single command.
 
-o  While in Arabic mode, numbers are entered from left to right. Upon
+o  While in Arabic mode, numbers are entered from left to right.  Upon
    entering a none number character, that character will be inserted
    just into the left of the last number.
 
@@ -101,14 +101,14 @@ need to be accounted for and invoked.
 
 o  Setting the Arabic fonts
 
-   +  For VIM GUI set the 'guifont' to your_ARABIC_FONT. This is done
+   +  For VIM GUI set the 'guifont' to your_ARABIC_FONT.  This is done
       by entering the following command in the VIM window.
 >
 		:set guifont=your_ARABIC_FONT
 <
       NOTE: the string 'your_ARABIC_FONT' is used to denote a complete
-	    font name akin to that used in linux/unix system.
-	    (eg. -misc-fixed-medium-r-normal--20-200-75-75-c-100-iso10646-1)
+	    font name akin to that used in Linux/Unix systems.
+	    (e.g. -misc-fixed-medium-r-normal--20-200-75-75-c-100-iso10646-1)
 
       You can append the 'guifont' set command to your .vimrc file
       in order to get the same above noted results.  In other words,
@@ -179,11 +179,11 @@ o  Enable Arabic settings [short-cut]
 
    If, on the other hand, you'd like to be verbose and explicit and
    are opting not to use the 'arabic' short-cut command, here's what
-   is needed (ie. if you use ':set arabic' you can skip this section) -
+   is needed (i.e. if you use ':set arabic' you can skip this section) -
 
    +  Arabic Keymapping Activation
 
-      To activate the Arabic keymap (ie. to remap your English/Latin
+      To activate the Arabic keymap (i.e. to remap your English/Latin
       keyboard to look-n-feel like a standard Arabic one), set the
       'keymap' command to "arabic".  This is done by entering
 >
@@ -197,14 +197,14 @@ o  Enable Arabic settings [short-cut]
       default mapping (English), it is advised that users use the 'CTRL-^'
       key press while in insert (or add/replace) mode.	The command-line
       will display your current mapping by displaying an "Arabic" string
-      next to your insertion mode (eg. -- INSERT Arabic --) indicating
+      next to your insertion mode (e.g. -- INSERT Arabic --) indicating
       your current keymap.
 
    +  Arabic deletion of a combined pair character
 
       By default VIM has the 'delcombine' option disabled.  This option
       allows the deletion of ALEF in a LAM_ALEF (LAA) combined character
-      and still retain the LAM (ie. it reverts to treating the combined
+      and still retain the LAM (i.e. it reverts to treating the combined
       character as its natural two characters form -- this also pertains
       to harakat and their combined forms).  You can enable this option
       by entering
@@ -227,7 +227,7 @@ o  Enable Arabic settings [short-cut]
       - While in Left-to-right mode, enter ':set rl' in the command line
 	('rl' is the abbreviation for rightleft).
 
-      - Put the ':set rl' line in your '.vimrc' file to start the VIM in
+      - Put the ':set rl' line in your '.vimrc' file to start Vim in
 	right-to-left mode permanently.
 
    +  Arabic right-to-left command-line Mode
@@ -295,7 +295,7 @@ Restrictions
 ------------
 
 o  VIM in its GUI form does not currently support Bi-directionality
-   (ie. the ability to see both Arabic and Latin intermixed within
+   (i.e. the ability to see both Arabic and Latin intermixed within
    the same line).
 
 
@@ -304,7 +304,7 @@ Known Bugs
 
 There is one known minor bug,
 
- 1. If you insert a haraka (eg. Fatha (U+064E)) after a LAM (U+0644)
+ 1. If you insert a haraka (e.g. Fatha (U+064E)) after a LAM (U+0644)
     and then insert an ALEF (U+0627), the appropriate combining will
     not happen due to the sandwiched haraka resulting in something
     that will NOT be displayed correctly.
@@ -320,4 +320,3 @@ There is one known minor bug,
 No other bugs are known to exist.
 
  vim:tw=78:ts=8:ft=help:norl:
-
diff --git a/runtime/doc/evim-fr.1 b/runtime/doc/evim-fr.1
new file mode 100644
index 0000000000..792c1bc30a
--- /dev/null
+++ b/runtime/doc/evim-fr.1
@@ -0,0 +1,56 @@
+.TH EVIM 1 "16 février 2002 February 16"
+.SH NAME
+evim \- « Easy Vim », édite un fichier avec Vim sans utiliser les modes
+.SH SYNOPSIS
+.br
+.B evim
+[options] [fichier ...]
+.br
+.B eview
+.SH DESCRIPTION
+.B eVim
+lance
+.B Vim
+et configure ses options afin qu'il se comporte comme un éditeur sans mode.
+Cela reste Vim, mais vous pouvez l'utiliser comme un éditeur « cliquer-taper ».
+Cela ressemble beaucoup à l'édition avec Notepad sur MS-Windows.
+.B eVim
+ne fonctionne qu'avec l'interface graphique, qui est nécessaire pour permettre
+l'utilisation des menus et de la barre d'outils.
+.PP
+Il n'est utile qu'aux personnes qui ne parviennent vraiment pas à utiliser Vim
+de façon traditionnelle. L'édition est alors bien moins efficace.
+.PP
+.B eview
+fait la même chose, mais démarre Vim en mode Lecture-seule.
+Cela revient à lancer evim \-R.
+.PP
+Voir vim(1) pour davantage d'informations sur Vim, les options, etc.
+.PP
+L'option 'insertmode' est activée pour permettre de taper directement du texte.
+.br
+Les mappages sont configurés pour que Copier et Coller fonctionnent avec les
+raccourcis habituels de MS-Windows. CTRL-X coupe le texte, CTRL-C copie le
+texte et CTRL-V colle le texte.
+Vous pouvez utiliser CTRL-Q pour obtenir la fonction originale de CTRL-V.
+.SH OPTIONS
+Voir vim(1).
+.SH FICHIERS
+.TP 15
+/usr/local/lib/vim/evim.vim
+Le script chargé pour initialiser eVim.
+.SH AUSSI CONNU SOUS
+Également connu sous le nom « Vim pour gumbies » [N.D.T. : Flying Circus...].
+Quand vous utilisez eVim, vous êtes censé prendre un mouchoir de poche,
+faire un noeud à chaque coin et le porter sur votre tête.
+.SH VOIR AUSSI
+vim(1)
+.SH AUTEUR
+La majeure partie de
+.B Vim
+a été écrite par Bram Moolenaar, avec l'aide de nombreux autres contributeurs.
+Voir le menu Aide/Remerciements ou ":help credits" dans
+.B Vim.
+.SH TRADUCTION
+Cette page de manuel a été traduite David Blanchet.
+<david.blanchet@free.fr> 2005-03-26.
diff --git a/runtime/doc/farsi.txt b/runtime/doc/farsi.txt
index 6f32f6e83f..0e7d9bbf76 100644
--- a/runtime/doc/farsi.txt
+++ b/runtime/doc/farsi.txt
@@ -1,4 +1,4 @@
-*farsi.txt*     For Vim version 7.0aa.  Last change: 2004 Jun 16
+*farsi.txt*     For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Mortaza Ghassab Shiran
@@ -42,7 +42,7 @@ o  Changing keyboard mapping and reverse insert modes using a single
 o  Backing from reverse insert mode to the correct place in the file
    (if possible).
 
-o  While in Farsi mode, numbers are entered from left to right. Upon entering
+o  While in Farsi mode, numbers are entered from left to right.  Upon entering
    a none number character, that character will be inserted just into the
    left of the last number.
 
@@ -54,8 +54,8 @@ o  Farsi keymapping on the command line in reverse insert mode.
 
 o  Toggling between left-to-right and right-to-left via F8 function key.
 
-o  Toggling between Farsi ISIR-3342 standard encoding and VIM Farsi via F9
-   function key. Since this makes sense only for the text written in
+o  Toggling between Farsi ISIR-3342 standard encoding and Vim Farsi via F9
+   function key.  Since this makes sense only for the text written in
    right-to-left mode, this function is also supported only in right-to-left
    mode.
 
@@ -77,8 +77,8 @@ Font Installation
 
 o  Installation of fonts for MS Window systems (NT/95/98)
 
-   From 'Control Panel' folder, start the 'Fonts' program. Then from 'file'
-   menu item select 'Install New Fonts ...'. Browse and select the
+   From 'Control Panel' folder, start the 'Fonts' program.  Then from 'file'
+   menu item select 'Install New Fonts ...'.  Browse and select the
    'far-a01.fon', then follow the installation guide.
    NOTE: several people have reported that this does not work.  The solution
    is unknown.
@@ -104,19 +104,19 @@ o  Installation of fonts for X Window systems (SunOS)
 o  Installation of ASCII screen fonts (Unix/Linux)
 
    For Linux system, copy the far-a01.f16 fonts into /usr/lib/kbd/consolefonts
-   directory and execute the setfont program as "setfont far-a01.f16". For
+   directory and execute the setfont program as "setfont far-a01.f16".  For
    other systems (e.g. SCO Unix), please refer to the fonts installation
    section of your system administration manuals.
 
 o  Installation of ASCII screen fonts (DOS)
 
-   After system power on, prior to the first use of VIM, upload the Farsi
+   After system power on, prior to the first use of Vim, upload the Farsi
    fonts by executing the far-a01.com font uploading program.
 
 
 Usage
 -----
-Prior to starting VIM, the environment in which VIM can run in Farsi mode,
+Prior to starting Vim, the environment in which Vim can run in Farsi mode,
 must be set.  In addition to installation of Farsi fonts, following points
 refer to some of the system environments, which you may need to set:
 Key code mapping, loading graphic card in ASCII screen mode, setting the IO
@@ -124,26 +124,26 @@ driver in 8 bit clean mode ... .
 
 o  Setting the Farsi fonts
 
-   +  For VIM GUI set the 'guifont' to far-a01. This is done by entering
-      ':set guifont=far-a01' in the VIM window.
+   +  For Vim GUI set the 'guifont' to far-a01.  This is done by entering
+      ':set guifont=far-a01' in the Vim window.
 
-      You can have 'guifont' set to far-a01 by VIM during the VIM startup
+      You can have 'guifont' set to far-a01 by Vim during the Vim startup
       by appending the ':set guifont=far-a01' into your .vimrc file
       (in case of NT/95/98 platforms _vimrc).
 
-      Under the X Window environment, you can also start the VIM with
+      Under the X Window environment, you can also start Vim with the
       '-fn far-a01' option.
 
-   +  For the VIM within a xterm, start a xterm with the Farsi fonts (e.g.
-      kterm -fn far-a01). Then start the VIM inside the kterm.
+   +  For Vim within a xterm, start a xterm with the Farsi fonts (e.g.
+      kterm -fn far-a01).  Then start Vim inside the kterm.
 
-   +  For VIM under DOS, prior to the first usage of VIM, upload the Farsi
+   +  For Vim under DOS, prior to the first usage of Vim, upload the Farsi
       fonts by executing the far-a01.com fonts uploading program.
 
 o  Farsi Keymapping Activation
 
    To activate the Farsi keymapping, set either 'altkeymap' or 'fkmap'.
-   This is done by entering ':set akm' or ':set fk' in the VIM window.
+   This is done by entering ':set akm' or ':set fk' in the Vim window.
    You can have 'altkeymap' or 'fkmap' set as default by appending ':set akm'
    or ':set fk' in your .vimrc file or _vimrc in case of NT/95/98 platforms.
 
@@ -152,24 +152,24 @@ o  Farsi Keymapping Activation
 
 o  right-to-left Farsi Mode
 
-   By default VIM starts in Left-to-right mode. Following are ways to change
+   By default Vim starts in Left-to-right mode.  Following are ways to change
    the window orientation:
 
-   + Start the VIM with -F option (e.g. vim -F ... ).
+   + Start Vim with the -F option (e.g. vim -F ...).
 
-   + Use F8 function key to toggle between left-to-right and right-to-left.
+   + Use the F8 function key to toggle between left-to-right and right-to-left.
 
    + While in Left-to-right mode, enter 'set rl' in the command line ('rl' is
      the abbreviation for rightleft).
 
-   + Put the 'set rl' line in your '.vimrc' file to start the  VIM in
+   + Put the 'set rl' line in your '.vimrc' file to start Vim in
      right-to-left mode permanently.
 
 Encoding
 --------
 
-The letter encoding used is the VIM extended ISIR-3342 standard with a built
-in function to convert between VIM extended ISIR-3342 and ISIR-3342 standard.
+The letter encoding used is the Vim extended ISIR-3342 standard with a built
+in function to convert between Vim extended ISIR-3342 and ISIR-3342 standard.
 
 For document portability reasons, the letter encoding is kept the same across
 different platforms (i.e. UNIX's, NT/95/98, MS DOS, ...).
@@ -183,11 +183,11 @@ o  Keyboard
    +  CTRL-_ moves the cursor to the end of the typed text in edit mode.
 
    +  CTRL-_ in command mode only toggles keyboard mapping between Farsi(akm)/
-      Latin. The Farsi text is then entered in reverse insert mode.
+      Latin.  The Farsi text is then entered in reverse insert mode.
 
    +  F8 - Toggles between left-to-right and right-to-left.
 
-   +  F9 - Toggles the encoding between ISIR-3342 standard and VIM extended
+   +  F9 - Toggles the encoding between ISIR-3342 standard and Vim extended
       ISIR-3342 (supported only in right-to-left mode).
 
    +  Keyboard mapping is based on the Iranian ISIRI-2901 standard.
@@ -231,28 +231,28 @@ o  In insert/replace mode and fkmap (Farsi mode) set, CTRL-B is not
    supported.
 
 o  If you change the character mapping between Latin/Farsi, the redo buffer
-   will be reset (emptied). That is, redo is valid and will function (using
+   will be reset (emptied).  That is, redo is valid and will function (using
    '.') only within the mode you are in.
 
 o  While numbers are entered in Farsi mode, the redo buffer will be reset
-   (emptied). That is, you can not redo the last changes (using '.') after
+   (emptied).  That is, you cannot redo the last changes (using '.') after
    entering numbers.
 
-o  While in left-to-right and Farsi mode set, CTRL-R is not supported.
+o  While in left-to-right mode and Farsi mode set, CTRL-R is not supported.
 
 o  While in right-to-left mode, the search on 'Latin' pattern does not work,
    except if you enter the Latin search pattern in reverse.
 
-o  In the command mode, there is no support for entering the numbers from left
-   to right and also for the sake of the flexibility the keymapping logic is
+o  In command mode there is no support for entering numbers from left
+   to right and also for the sake of flexibility the keymapping logic is
    restricted.
 
-o  Under X Window environment, if you want to run the VIM within a xterm
+o  Under the X Window environment, if you want to run Vim within a xterm
    terminal emulator and Farsi mode set, you need to have an ANSI compatible
-   xterm terminal emulator. This is because the letter codes above 128 decimal
+   xterm terminal emulator.  This is because the letter codes above 128 decimal
    have certain meanings in the standard xterm terminal emulator.
 
-   Note: Under X Window environment, VIM GUI works fine in Farsi mode.
+   Note: Under X Window environment, Vim GUI works fine in Farsi mode.
 	 This eliminates the need of any xterm terminal emulator.
 
 
@@ -261,7 +261,7 @@ Bugs
 While in insert/replace and Farsi mode set, if you repeatedly change the
 cursor position (via cursor movement) and enter new text and then try to undo
 the last change, the undo will lag one change behind.  But as you continue to
-undo, you will reach the original line of text. You can also use U to undo all
+undo, you will reach the original line of text.  You can also use U to undo all
 changes made in the current line.
 
 For more information about the bugs refer to rileft.txt.
diff --git a/runtime/doc/filetype.txt b/runtime/doc/filetype.txt
index a4cc593a2a..8b7d6ac4a1 100644
--- a/runtime/doc/filetype.txt
+++ b/runtime/doc/filetype.txt
@@ -1,4 +1,4 @@
-*filetype.txt*  For Vim version 7.0aa.  Last change: 2004 Aug 31
+*filetype.txt*  For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -382,7 +382,7 @@ ways to change this:
 
 CHANGELOG						*changelog-plugin*
 
-Allows for easy entrance of Changelog entries in Changelog files. There are
+Allows for easy entrance of Changelog entries in Changelog files.  There are
 some commands, mappings, and variables worth exploring:
 
 Options:
@@ -462,7 +462,7 @@ g:changelog_date_entry_search
 The Changelog entries are inserted where they add the least amount of text.
 After figuring out the current date and user, the file is searched for an
 entry beginning with the current date and user and if found adds another item
-under it. If not found, a new entry and item is prepended to the beginning of
+under it.  If not found, a new entry and item is prepended to the beginning of
 the Changelog.
 
 
@@ -474,7 +474,7 @@ Options:
 'textwidth'	is set to 72 for fixed source format as required by the
 		Fortran standards and to 80 for free source format.
 'formatoptions' is set to break code and comment lines and to preserve long
-		lines. You can format comments with |gq|.
+		lines.  You can format comments with |gq|.
 For further discussion of fortran_have_tabs and the method used for the
 detection of source format see |fortran-syntax|.
 
diff --git a/runtime/doc/intro.txt b/runtime/doc/intro.txt
index 935577724c..ee187c974c 100644
--- a/runtime/doc/intro.txt
+++ b/runtime/doc/intro.txt
@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 7.0aa.  Last change: 2005 Feb 07
+*intro.txt*     For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -330,11 +330,11 @@ and <> are part of what you type, the context should make this clear.
 ["x]		An optional register designation where text can be stored.
 		See |registers|.  The x is a single character between 'a' and
 		'z' or 'A' and 'Z' or '"', and in some cases (with the put
-		command) between '0' and '9', '%', '#', or others. The
+		command) between '0' and '9', '%', '#', or others.  The
 		uppercase and lowercase letter designate the same register,
 		but the lowercase letter is used to overwrite the previous
 		register contents, while the uppercase letter is used to
-		append to the previous register contents. Without the ""x" or
+		append to the previous register contents.  Without the ""x" or
 		with """" the stored text is put into the unnamed register.
 
 							*{}*
diff --git a/runtime/doc/os_amiga.txt b/runtime/doc/os_amiga.txt
index 069e76964e..0e42c5d82d 100644
--- a/runtime/doc/os_amiga.txt
+++ b/runtime/doc/os_amiga.txt
@@ -1,4 +1,4 @@
-*os_amiga.txt*  For Vim version 7.0aa.  Last change: 2004 Jun 28
+*os_amiga.txt*  For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -13,7 +13,7 @@ Installation on the Amiga:
   look for the file "VIM:doc/help.txt" (for the help command).
   Setting the environment variable $VIM also works.  And the other way around:
   when $VIM used and it is not defined, "VIM:" is used.
-- With DOS 1.3 or earlier: Put "arp.library" in "libs:". Vim must have been
+- With DOS 1.3 or earlier: Put "arp.library" in "libs:".  Vim must have been
   compiled with the |+ARP| feature enabled.  Make sure that newcli and run are
   in "C:" (for executing external commands).
 - Put a shell that accepts a command with "-c" (e.g. "Csh" from Fish disk
@@ -21,13 +21,13 @@ Installation on the Amiga:
   executing external commands).
 
 If you have sufficient memory you can avoid startup delays by making Vim and
-csh resident with the command "rez csh vim". You will have to put
-"rezlib.library" in your "libs:" directory. Under 2.0 you will need rez
+csh resident with the command "rez csh vim".  You will have to put
+"rezlib.library" in your "libs:" directory.  Under 2.0 you will need rez
 version 0.5.
 
 If you do not use digraphs, you can save some memory by recompiling without
-the |+digraphs| feature. If you want to use Vim with other terminals you can
-recompile with the TERMCAP option. Vim compiles with Manx 5.x and SAS 6.x.
+the |+digraphs| feature.  If you want to use Vim with other terminals you can
+recompile with the TERMCAP option.  Vim compiles with Manx 5.x and SAS 6.x.
 See the makefiles and feature.h.
 
 If you notice Vim crashes on some files when syntax highlighting is on, or
@@ -47,7 +47,7 @@ If you want to use different colors set the termcap codes:
 	t_ZH (for italic text)
 	t_ZR (for normal text after t_ZH)
 
-Standard ANSI escape sequences are used. The codes are:
+Standard ANSI escape sequences are used.  The codes are:
 30 grey char   40 grey cell   >0 grey background    0 all attributes off
 31 black char  41 black cell  >1 black background   1 boldface
 32 white char  42 white cell  >2 white background   2 faint
@@ -57,8 +57,8 @@ Standard ANSI escape sequences are used. The codes are:
 36 white char  46 white cell  >6 white background   8 invisible
 37 blue char   47 blue cell   >7 blue background
 
-The codes with '>' must be the last. The cell and background color should be
-the same. The codes can be combined by separating them with a semicolon. For
+The codes with '>' must be the last.  The cell and background color should be
+the same.  The codes can be combined by separating them with a semicolon.  For
 example to get white text on a blue background: >
   :set t_me=^V<Esc>[0;32;43;>3m
   :set t_se=^V<Esc>[0;32;43;>3m
@@ -72,14 +72,14 @@ example to get white text on a blue background: >
 
 When using multiple commands with a filter command, e.g. >
   :r! echo this; echo that
-Only the output of the last command is used. To fix this you have to group the
-commands. This depends on the shell you use (that is why it is not done
-automatically in Vim). Examples: >
+Only the output of the last command is used.  To fix this you have to group the
+commands.  This depends on the shell you use (that is why it is not done
+automatically in Vim).  Examples: >
   :r! (echo this; echo that)
   :r! {echo this; echo that}
 
 Commands that accept a single file name allow for embedded spaces in the file
-name. However, when using commands that accept several file names, embedded
+name.  However, when using commands that accept several file names, embedded
 spaces need to be escaped with a backslash.
 
 ------------------------------------------------------------------------------
@@ -94,8 +94,8 @@ For the latest info about the MorphOS version:
 Problems ~
 
 There are a couple of problems which are not MorphOS related but more Vim and
-UN*X related. When starting up Vim in ram: it complains with a nag requester
-from MorphOS please simply ignore it. Another problem is when running Vim as
+UN*X related.  When starting up Vim in ram: it complains with a nag requester
+from MorphOS please simply ignore it.  Another problem is when running Vim as
 is some plugins will cause a few problems which you can ignore as well.
 Hopefully someone will be fixing it over the time.
 
@@ -116,7 +116,7 @@ Installation ~
 
 	ftp://ftp.vim.org/pub/vim/amiga/vim62rt.tgz
 
-   and unpack it in your 'Apps' directory of the MorphOS installation. For me
+   and unpack it in your 'Apps' directory of the MorphOS installation.  For me
    this would create following directory hierarchy:
 
 	MorphOS:Apps/Vim/Vim62/...
@@ -130,8 +130,8 @@ Installation ~
 
 4) Copy the '.vimrc' file to s:
 
-5) There is also a file named 'color-sequence' included in this archive. This
-   will set the MorphOS Shell to show ANSI colors. Please copy the file to s:
+5) There is also a file named 'color-sequence' included in this archive.  This
+   will set the MorphOS Shell to show ANSI colors.  Please copy the file to s:
    and change the s:shell-startup to:
 
 	;Begin VIM
diff --git a/runtime/doc/os_unix.txt b/runtime/doc/os_unix.txt
index 965b18d996..0a69e70c63 100644
--- a/runtime/doc/os_unix.txt
+++ b/runtime/doc/os_unix.txt
@@ -1,4 +1,4 @@
-*os_unix.txt*   For Vim version 7.0aa.  Last change: 2005 Mar 25
+*os_unix.txt*   For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -11,7 +11,7 @@ For compiling Vim on Unix see "INSTALL" and "Makefile" in the src directory.
 
 The default help file name is "/usr/local/lib/vim/help.txt"
 The files "$HOME/.vimrc" and "$HOME/.exrc" are used instead of "s:.vimrc" and
-"s:.exrc". Additionally "/usr/local/etc/vimrc" is used first.
+"s:.exrc".  Additionally "/usr/local/etc/vimrc" is used first.
 If "/usr/local/share" exists it is used instead of "/usr/local/lib".
 
 Temporary files (for filtering) are put in "/tmp".  If you want to place them
@@ -26,15 +26,15 @@ For executing external commands fork()/exec() is used when possible, otherwise
 system() is used, which is a bit slower.  The output of ":version" includes
 |+fork| when fork()/exec() is used, |+system()| when system() is used.  This
 can be changed at compile time.
-(For forking of the GUI version see |gui-fork|).
+(For forking of the GUI version see |gui-fork|.)
 
 Because terminal updating under Unix is often slow (e.g. serial line
 terminal, shell window in suntools), the 'showcmd' and 'ruler' options
-are default off. If you have a fast terminal, try setting them on.  You might
+are default off.  If you have a fast terminal, try setting them on.  You might
 also want to set 'ttyfast'.
 
 When using Vim in an xterm the mouse clicks can be used by Vim by setting
-'mouse' to "a". If there is access to an X-server gui style copy/paste will
+'mouse' to "a".  If there is access to an X-server gui style copy/paste will
 be used and visual feedback will be provided while dragging with the mouse.
 If you then still want the xterm copy/paste with the mouse, press the shift
 key when using the mouse.  See |mouse-using|.  Visual feedback while dragging
diff --git a/runtime/doc/os_win32.txt b/runtime/doc/os_win32.txt
index 6f9a541c2e..880981d74e 100644
--- a/runtime/doc/os_win32.txt
+++ b/runtime/doc/os_win32.txt
@@ -1,4 +1,4 @@
-*os_win32.txt*  For Vim version 7.0aa.  Last change: 2004 Aug 31
+*os_win32.txt*  For Vim version 7.0aa.  Last change: 2005 Mar 29
 
 
 		  VIM REFERENCE MANUAL    by George Reilly
@@ -192,7 +192,7 @@ A. In the GUI version, you can use the 'guifont' option.  Example: >
 Q. When I change the size of the console window with ':set lines=xx' or
    similar, the font changes! (Win95)
 A. You have the console font set to 'Auto' in Vim's (or your MS-DOS prompt's)
-   properties. This makes W95 guess (badly!) what font is best. Set an explicit
+   properties.  This makes W95 guess (badly!) what font is best.  Set an explicit
    font instead.
 
 Q. Why can't I paste into Vim when running Windows 95?
@@ -282,7 +282,7 @@ A. VisionFS can't handle certain dot (.) three letter extension file names.
 	dir > file.bat
 <
    The result is that the "dir" command updates the "file.bat~" file, instead
-   of creating a new "file.bat" file. This same behavior is exhibited in Vim
+   of creating a new "file.bat" file.  This same behavior is exhibited in Vim
    when editing an existing file named "foo.bat" because the default behavior
    of Vim is to create a temporary file with a '~' character appended to the
    name.  When the file is written, it winds up being deleted.
@@ -306,13 +306,13 @@ A. When using :! to run an external command, you can run it with "start": >
    To avoid this special treatment, use ":! start".
 
 Q. I'm using Win32s, and when I try to run an external command like "make",
-   Vim doesn't wait for it to finish! Help!
+   Vim doesn't wait for it to finish!  Help!
 A. The problem is that a 32-bit application (Vim) can't get notification from
-   Windows that a 16-bit application (your DOS session) has finished. Vim
+   Windows that a 16-bit application (your DOS session) has finished.  Vim
    includes a work-around for this, but you must set up your DOS commands to
-   run in a window, not full-screen. Unfortunately the default when you
-   install Windows is full-screen. To change this:
-   1) Start PIF editor (in the Main program group)
+   run in a window, not full-screen.  Unfortunately the default when you
+   install Windows is full-screen.  To change this:
+   1) Start PIF editor (in the Main program group).
    2) Open the file "_DEFAULT.PIF" in your Windows directory.
    3) Changes the display option from "Full Screen" to "Windowed".
    4) Save and exit.
@@ -321,10 +321,10 @@ A. The problem is that a 32-bit application (Vim) can't get notification from
 	:!dir C:\<CR>".
 <  You should see a DOS box window appear briefly with the directory listing.
 
-Q. I use Vim under Win32s and NT. In NT, I can define the console to default to
-   50 lines, so that I get a 80x50 shell when I ':sh'. Can I do the same in
+Q. I use Vim under Win32s and NT.  In NT, I can define the console to default to
+   50 lines, so that I get a