Update runtime files

16 files changed, 129 insertions, 93 deletions

diff --git a/runtime/doc/cmdline.txt b/runtime/doc/cmdline.txt
index e29369cb66..a9d3b36422 100644
--- a/runtime/doc/cmdline.txt
+++ b/runtime/doc/cmdline.txt
@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 9.0.  Last change: 2022 Jun 16
+*cmdline.txt*   For Vim version 9.0.  Last change: 2022 Sep 26
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -806,7 +806,7 @@ Count and Range						*N:*
 
 When giving a count before entering ":", this is translated into:
 		:.,.+(count - 1)
-In words: The 'count' lines at and after the cursor.  Example: To delete
+In words: The "count" lines at and after the cursor.  Example: To delete
 three lines: >
 		3:d<CR>		is translated into: .,.+2d<CR>
 <
diff --git a/runtime/doc/develop.txt b/runtime/doc/develop.txt
index f76a9456e2..9325694755 100644
--- a/runtime/doc/develop.txt
+++ b/runtime/doc/develop.txt
@@ -1,4 +1,4 @@
-*develop.txt*   For Vim version 9.0.  Last change: 2020 Aug 15
+*develop.txt*   For Vim version 9.0.  Last change: 2022 Sep 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
diff --git a/runtime/doc/ft_context.txt b/runtime/doc/ft_context.txt
index ba6bd0d819..e608c5b849 100644
--- a/runtime/doc/ft_context.txt
+++ b/runtime/doc/ft_context.txt
@@ -1,4 +1,4 @@
-*ft_context.txt*	For Vim version 9.0.  Last change: 2022 Aug 12
+*ft_context.txt*	For Vim version 9.0.  Last change: 2022 Sep 27
 
 This is the documentation for the ConTeXt filetype plugin.
 
@@ -23,13 +23,12 @@ ConTeXt, similarly to LaTeX, is a macro-based typesetting system built on TeX:
 <
 The ConTeXt plugin provides syntax highlighting, completion and support for
 typesetting ConTeXt documents. The recommended way to typeset a document is to
-use |:ConTeXt|. This will invoke the `mtxrun` script that is found in $PATH.
+use |:ConTeXt|. This will invoke the `mtxrun` script that is found in `$PATH`.
 
-For more fine grained control over the command and its environment, you may
-invoke `context.Typeset()` directly (or `context#Typeset()` from legacy Vim
-script). For instance, if you have installed a version of ConTeXt in
-`~/context`, you may define a function to use it (you may put the following
-code in `~/.vim/after/ftplugin/context.vim`) similar to the following:
+For more fine grained control over the command and its environment,
+`context.Typeset()` can be used directly (or `context#Typeset()` from legacy
+Vim script). For instance, if a version of ConTeXt is installed in
+`~/context`, you may define a function to use it similar to the following:
 >
 	import autoload 'context.vim'
 
@@ -38,14 +37,15 @@ code in `~/.vim/after/ftplugin/context.vim`) similar to the following:
 	      printf("%s/context/tex/texmf-<os>-<arch>/bin:%s", $HOME, $PATH)}
 	    context.Typeset("%", env)
 	enddef
-<
-and perhaps use it with a mapping:
+
+This code may go in `~/.vim/after/ftplugin/context.vim`. A mapping can then be
+defined to invoke the custom command:
 >
 	nnoremap <silent><buffer><leader>t <scriptcmd>MyConTeXt()<cr>
 <
 `context.Typeset()` accepts a third optional argument to specify a custom
-typesetting command. Such argument must be a function that takes a path and
-returns the command as a List. For example:
+typesetting command. That must be a function that takes a path and returns the
+command as a List. For example:
 >
 	def ConTeXtCustomCommand(path: string): list<string>
 	  return ['mtxrun', '--script', 'context', '--nonstopmode, path]
@@ -103,14 +103,20 @@ Stop all the ConTeXt jobs currently running in the background.
 Settings ~
 					*'b:context_ignore_makefile'*
 					*'g:context_ignore_makefile'*
-`make` can be used to (synchronously) typeset a document. If a Makefile exists
+`:make` can be used to (synchronously) typeset a document. If a Makefile exists
 and this option is not set, standard `make` is used. If this option is set,
 `mtxrun` is invoked instead, even if a Makefile exists.
 >
 	g:context_ignore_makefile = 0
 <
-NOTE: before using `make`, set the working directory of the buffer to the
+NOTE: before using `:make`, set the working directory of the buffer to the
 directory of the file to be typeset.
+
+					*'g:context_extra_options'*
+A list of additional options to pass to `mtxrun`.
+>
+	g:context_extra_options = []
+<
 					*'b:context_include'*
 					*'g:context_include'*
 Dictionary of filetype/GROUP pairs for which syntax highlighting should be
diff --git a/runtime/doc/indent.txt b/runtime/doc/indent.txt
index 2ebbadbf8a..38c173bce2 100644
--- a/runtime/doc/indent.txt
+++ b/runtime/doc/indent.txt
@@ -1227,13 +1227,31 @@ comments will be indented according to the correctly indented code.
 
 
 VIM							*ft-vim-indent*
-							*g:vim_indent_cont*
-For indenting Vim scripts there is one variable that specifies the amount of
-indent for a continuation line, a line that starts with a backslash: >
-
-	:let g:vim_indent_cont = shiftwidth() * 3
+							*g:vim_indent*
+Vim scripts indentation can be configured with the `g:vim_indent` dictionary
+variable.  It supports 3 keys, `line_continuation`, `more_in_bracket_block`,
+and `searchpair_timeout`.
+`line_continuation` expects a number which will be added to the indent level of
+a continuation line starting with a backslash, and defaults to
+`shiftwidth() * 3`.  It also accepts a string, which is evaluated at runtime.
+`more_in_bracket_block` expects a boolean value; when on, an extra
+`shiftwidth()` is added inside blocks surrounded with brackets.  It defaults to
+`v:false`.
+`searchpair_timeout` expects a number which will be passed to `searchpair()` as
+a timeout.  Increasing the value might give more accurate results, but also
+causes the indentation to take more time.  It defaults to 100 (milliseconds).
+
+Example of configuration:
+
+	let g:vim_indent = #{
+	    \ line_continuation: shiftwidth() * 3,
+	    \ more_in_bracket_block: v:false,
+	    \ searchpair_timeout: 100,
+	    \ }
 
-Three times shiftwidth is the default value.
+							*g:vim_indent_cont*
+This variable is equivalent to `g:vim_indent.line_continuation`.
+It's supported for backward compatibility.
 
 
  vim:tw=78:ts=8:noet:ft=help:norl:
diff --git a/runtime/doc/map.txt b/runtime/doc/map.txt
index f1bfd75de6..bd1381a37d 100644
--- a/runtime/doc/map.txt
+++ b/runtime/doc/map.txt
@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 9.0.  Last change: 2022 Sep 12
+*map.txt*       For Vim version 9.0.  Last change: 2022 Sep 26
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1761,7 +1761,8 @@ The valid escape sequences are
 If the first two characters of an escape sequence are "q-" (for example,
 <q-args>) then the value is quoted in such a way as to make it a valid value
 for use in an expression.  This uses the argument as one single value.
-When there is no argument <q-args> is an empty string.
+When there is no argument <q-args> is an empty string.  See the
+|q-args-example| below.
 							*<f-args>*
 To allow commands to pass their arguments on to a user-defined function, there
 is a special form <f-args> ("function args").  This splits the command
@@ -1771,7 +1772,7 @@ See the Mycmd example below.  If no arguments are given <f-args> is removed.
    To embed whitespace into an argument of <f-args>, prepend a backslash.
 <f-args> replaces every pair of backslashes (\\) with one backslash.  A
 backslash followed by a character other than white space or a backslash
-remains unmodified.  Overview:
+remains unmodified.  Also see |f-args-example| below.  Overview:
 
 	command		   <f-args> ~
 	XX ab		   'ab'
@@ -1785,7 +1786,8 @@ remains unmodified.  Overview:
 	XX a\\\\b	   'a\\b'
 	XX a\\\\ b	   'a\\', 'b'
 
-Examples >
+
+Examples for user commands: >
 
    " Delete everything after here to the end
    :com Ddel +,$d
@@ -1801,7 +1803,8 @@ Examples >
    " Count the number of lines in the range
    :com! -range -nargs=0 Lines  echo <line2> - <line1> + 1 "lines"
 
-   " Call a user function (example of <f-args>)
+<						*f-args-example*
+Call a user function (example of <f-args>) >
    :com -nargs=* Mycmd call Myfunc(<f-args>)
 
 When executed as: >
@@ -1809,7 +1812,8 @@ When executed as: >
 This will invoke: >
 	:call Myfunc("arg1","arg2")
 
-   :" A more substantial example
+<						*q-args-example* 
+A more substantial example: >
    :function Allargs(command)
    :   let i = 0
    :   while i < argc()
diff --git a/runtime/doc/motion.txt b/runtime/doc/motion.txt
index 4253684d1a..263c4f3ac3 100644
--- a/runtime/doc/motion.txt
+++ b/runtime/doc/motion.txt
@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 9.0.  Last change: 2022 Apr 18
+*motion.txt*    For Vim version 9.0.  Last change: 2022 Sep 26
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1145,7 +1145,7 @@ g;			Go to [count] older position in change list.
 			(not a motion command)
 
 							*g,* *E663*
-g,			Go to [count] newer cursor position in change list.
+g,			Go to [count] newer position in change list.
 			Just like |g;| but in the opposite direction.
 			(not a motion command)
 
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index 336d4497d5..4ea75ba2db 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 9.0.  Last change: 2022 Sep 09
+*options.txt*	For Vim version 9.0.  Last change: 2022 Sep 27
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1702,7 +1702,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	after that.  Therefore do not append an item with += but use ^= to
 	prepend, e.g.: >
 		set clipboard^=unnamed
-<	These names are recognized:
+<	When using the GUI see |'go-A'|.
+	These names are recognized:
 
 						*clipboard-unnamed*
 	unnamed		When included, Vim will use the clipboard register '*'
@@ -3978,6 +3979,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 			 "A"		 -			yes
 			 "aA"		yes			yes
 
+		When using a terminal see the 'clipboard' option.
+
 								*'go-c'*
 	  'c'	Use console dialogs instead of popup dialogs for simple
 		choices.
diff --git a/runtime/doc/pattern.txt b/runtime/doc/pattern.txt
index 7700d26e10..a9452c5c3f 100644
--- a/runtime/doc/pattern.txt
+++ b/runtime/doc/pattern.txt
@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 9.0.  Last change: 2022 Mar 04
+*pattern.txt*   For Vim version 9.0.  Last change: 2022 Sep 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -134,6 +134,11 @@ gD			Goto global Declaration.  When the cursor is on a
 CTRL-C			Interrupt current (search) command.  Use CTRL-Break on
 			MS-Windows |dos-CTRL-Break|.
 			In Normal mode, any pending command is aborted.
+			When Vim was started with output redirected and there
+			are no changed buffers CTRL-C exits Vim.  That is to
+			help users who use "vim file | grep word" and don't
+			know how to get out (blindly typing :qa<CR> would
+			work).
 
 							*:noh* *:nohlsearch*
 :noh[lsearch]		Stop the highlighting for the 'hlsearch' option.  It
diff --git a/runtime/doc/quickfix.txt b/runtime/doc/quickfix.txt
index 67947854df..032e9a7960 100644
--- a/runtime/doc/quickfix.txt
+++ b/runtime/doc/quickfix.txt
@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 9.0.  Last change: 2022 Feb 22
+*quickfix.txt*  For Vim version 9.0.  Last change: 2022 Sep 26
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -478,7 +478,7 @@ You can parse a list of lines using 'errorformat' without creating or
 modifying a quickfix list using the |getqflist()| function. Examples: >
 	echo getqflist({'lines' : ["F1:10:Line10", "F2:20:Line20"]})
 	echo getqflist({'lines' : systemlist('grep -Hn quickfix *')})
-This returns a dictionary where the 'items' key contains the list of quickfix
+This returns a dictionary where the "items" key contains the list of quickfix
 entries parsed from lines. The following shows how to use a custom
 'errorformat' to parse the lines without modifying the 'errorformat' option: >
 	echo getqflist({'efm' : '%f#%l#%m', 'lines' : ['F1#10#Line']})
@@ -597,7 +597,7 @@ can go back to the unfiltered list using the |:colder|/|:lolder| command.
 			quickfix command or function, the |b:changedtick|
 			variable is incremented.  You can get the number of
 			this buffer using the getqflist() and getloclist()
-			functions by passing the 'qfbufnr' item. For a
+			functions by passing the "qfbufnr" item. For a
 			location list, this buffer is wiped out when the
 			location list is removed.
 
@@ -2011,7 +2011,7 @@ The function should return a single line of text to display in the quickfix
 window for each entry from start_idx to end_idx. The function can obtain
 information about the entries using the |getqflist()| function and specifying
 the quickfix list identifier "id". For a location list, getloclist() function
-can be used with the 'winid' argument. If an empty list is returned, then the
+can be used with the "winid" argument. If an empty list is returned, then the
 default format is used to display all the entries. If an item in the returned
 list is an empty string, then the default format is used to display the
 corresponding entry.
diff --git a/runtime/doc/repeat.txt b/runtime/doc/repeat.txt
index f8602ba8c9..059c6393d2 100644
--- a/runtime/doc/repeat.txt
+++ b/runtime/doc/repeat.txt
@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 9.0.  Last change: 2022 Jun 18
+*repeat.txt*    For Vim version 9.0.  Last change: 2022 Sep 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -92,7 +92,8 @@ pattern and do not match another pattern: >
 This first finds all lines containing "found", but only executes {cmd} when
 there is no match for "notfound".
 
-To execute a non-Ex command, you can use the `:normal` command: >
+Any Ex command can be used, see |ex-cmd-index|.  To execute a Normal mode
+command, you can use the `:normal` command: >
 	:g/pat/normal {commands}
 Make sure that {commands} ends with a whole command, otherwise Vim will wait
 for you to type the rest of the command for each match.  The screen will not
@@ -200,7 +201,8 @@ For writing a Vim script, see chapter 41 of the user manual |usr_41.txt|.
 							*:source-range*
 :[range]so[urce] [++clear]
 			Read Ex commands from the [range] of lines in the
-			current buffer.
+			current buffer.  When [range] is omitted read all
+			lines.
 
 			When sourcing commands from the current buffer, the
 			same script-ID |<SID>| is used even if the buffer is
@@ -904,6 +906,11 @@ executed like a normal Ex command, "step" will stop once in the compiled
 context, where local variables can be inspected, and once just before
 executing the command.
 
+In a :def function variables that haven't been declared yet cannot be
+inspected.  Variables that have been declared can be inspected, also when the
+block they were declared in has finished.  In commands this would not be
+possible, thus is slightly misleading (but can be useful).
+
 The backtrace shows the hierarchy of function calls, e.g.:
 	>bt ~
 	  3 function One[3] ~
diff --git a/runtime/doc/syntax.txt b/runtime/doc/syntax.txt
index adc1d56955..1587df5e7c 100644
--- a/runtime/doc/syntax.txt
+++ b/runtime/doc/syntax.txt
@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 9.0.  Last change: 2022 Jun 10
+*syntax.txt*	For Vim version 9.0.  Last change: 2022 Sep 26
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -3153,7 +3153,7 @@ The default is to use the twice sh_minlines.  Set it to a smaller number to
 speed up displaying.  The disadvantage is that highlight errors may appear.
 
 syntax/sh.vim tries to flag certain problems as errors; usually things like
-extra ']'s, 'done's, 'fi's, etc.  If you find the error handling problematic
+unmatched "]", "done", "fi", etc.  If you find the error handling problematic
 for your purposes, you may suppress such error highlighting by putting
 the following line in your .vimrc: >
 
diff --git a/runtime/doc/tags b/runtime/doc/tags
index 1fdc74fc9b..2c4a550dee 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -302,6 +302,7 @@ $quote	eval.txt	/*$quote*
 'fs'	options.txt	/*'fs'*
 'fsync'	options.txt	/*'fsync'*
 'ft'	options.txt	/*'ft'*
+'g:context_extra_options'	ft_context.txt	/*'g:context_extra_options'*
 'g:context_ignore_makefile'	ft_context.txt	/*'g:context_ignore_makefile'*
 'g:context_include'	ft_context.txt	/*'g:context_include'*
 'g:mf_other_macros'	ft_mp.txt	/*'g:mf_other_macros'*
@@ -4343,6 +4344,7 @@ E1302	eval.txt	/*E1302*
 E1303	map.txt	/*E1303*
 E1304	vim9.txt	/*E1304*
 E1305	textprop.txt	/*E1305*
+E1306	vim9.txt	/*E1306*
 E131	userfunc.txt	/*E131*
 E132	userfunc.txt	/*E132*
 E133	userfunc.txt	/*E133*
@@ -6802,6 +6804,7 @@ extendnew()	builtin.txt	/*extendnew()*
 extension-removal	cmdline.txt	/*extension-removal*
 extensions-improvements	todo.txt	/*extensions-improvements*
 f	motion.txt	/*f*
+f-args-example	map.txt	/*f-args-example*
 false	vim9.txt	/*false*
 false-variable	eval.txt	/*false-variable*
 falsy	eval.txt	/*falsy*
@@ -7399,6 +7402,7 @@ g:tex_subscripts	syntax.txt	/*g:tex_subscripts*
 g:tex_superscripts	syntax.txt	/*g:tex_superscripts*
 g:tex_verbspell	syntax.txt	/*g:tex_verbspell*
 g:var	eval.txt	/*g:var*
+g:vim_indent	indent.txt	/*g:vim_indent*
 g:vim_indent_cont	indent.txt	/*g:vim_indent_cont*
 g:vimball_home	pi_vimball.txt	/*g:vimball_home*
 g:vimball_mkdir	pi_vimball.txt	/*g:vimball_mkdir*
@@ -9173,6 +9177,7 @@ pythonx	if_pyth.txt	/*pythonx*
 pythonx-directory	if_pyth.txt	/*pythonx-directory*
 pyxeval()	builtin.txt	/*pyxeval()*
 q	repeat.txt	/*q*
+q-args-example	map.txt	/*q-args-example*
 q/	cmdline.txt	/*q\/*
 q:	cmdline.txt	/*q:*
 q?	cmdline.txt	/*q?*
diff --git a/runtime/doc/textprop.txt b/runtime/doc/textprop.txt
index 5fb53aff12..5a849fed69 100644
--- a/runtime/doc/textprop.txt
+++ b/runtime/doc/textprop.txt
@@ -1,4 +1,4 @@
-*textprop.txt*  For Vim version 9.0.  Last change: 2022 Sep 17
+*textprop.txt*  For Vim version 9.0.  Last change: 2022 Sep 21
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -143,10 +143,11 @@ prop_add({lnum}, {col}, {props})
 				automatically to a negative number; otherwise
 				zero is used
 							*E1305*
-		   text		text to be displayed before {col}, or after the
-				line if {col} is zero; prepend and/or append
-				spaces for padding with highlighting; cannot
-				be used with "length", "end_lnum" and "end_col"
+		   text		text to be displayed before {col}, or
+				above/below the line if {col} is zero; prepend
+				and/or append spaces for padding with
+				highlighting; cannot be used with "length",
+				"end_lnum" and "end_col" |virtual-text|
 		   					*E1294*
 		   text_align	when "text" is present and {col} is zero;
 				specifies where to display the text:
@@ -191,12 +192,23 @@ prop_add({lnum}, {col}, {props})
 		If not found an error is given.
 							*virtual-text*
 		When "text" is used and the column is non-zero then this text
-		will be displayed at the start location of the text property
-		after the text.  The text of the buffer line will be shifted
-		to make room.  This is called "virtual text".
-		When the column is zero the virtual text will appear after the
-		buffer text.  The "text_align" and "text_wrap" arguments
-		determine how it is displayed.
+		will be displayed at the specified start location of the text
+		property.  The text of the buffer line will be shifted to make
+		room.  This is called "virtual text".
+		When the column is zero the virtual text will appear above,
+		after or below the buffer text.  The "text_align" and
+		"text_wrap" arguments determine how it is displayed.
+		To separate the virtual text from the buffer text prepend
+		and/or append spaces to the "text" field or use the
+		"text_padding_left" value.
+
+		Make sure to use a highlight that makes clear to the user that
+		this is virtual text, otherwise it will be very confusing that
+		the text cannot be edited.  When using "above" you need to
+		make clear this text belongs to the text line below it, when
+		using "below" you need to make sure it belongs to the text
+		line above it.
+
 		The text will be displayed but it is not part of the actual
 		buffer line, the cursor cannot be placed on it.  A mouse click
 		in the text will move the cursor to the first character after
@@ -208,11 +220,6 @@ prop_add({lnum}, {col}, {props})
 		property with "text" has been added for a buffer then using a
 		negative "id" for any other property will give an error:
 		*E1293*
-		Make sure to use a highlight that makes clear to the user that
-		this is virtual text, otherwise it will be very confusing that
-		the text cannot be edited.
-		To separate the virtual text from the buffer text prepend
-		and/or append spaces to the "text" field.
 
 		Can also be used as a |method|: >
 			GetLnum()->prop_add(col, props)
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index 864f0b2cf0..75aef3101b 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 9.0.  Last change: 2022 Sep 18
+*todo.txt*      For Vim version 9.0.  Last change: 2022 Sep 27
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -38,49 +38,21 @@ browser use: https://github.com/vim/vim/issues/1234
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-Closure created in for loop can use loop variable?  #11094
-    Nested loops do not work correctly yet.
-    Would need to save vars for each block separately.
-
-Virtual text:
-- Virtual text below: padding is highlighted when 'number' is set  #11138
-- Virtual text above: do not highlight until end of line?  #11138
-- 'number' should be below "above" virtual text?  Might be difficult to
-  implement.
-- Add highlight for the gap before/after virtual text above/below?
-- option to hide virtual text?
-
-Fail with valgrind: test_edit
-Found errors in Test_edit_insertmode_ex_edit():
-        Run 1, 01:19:51 - 01:20:01:
-        command line..script /home/mool/vim/vim90/src/testdir/runtest.vim[469]..function RunTheTest[44]..Test_edit_insertmode_ex_edit[13]..WaitForAssert[2]..<SNR>6_WaitForCommon[11]..<lambda>4 line 1: Pattern '^-- INSERT --\\s*$' does not match ''
-
 From test_global
         Found errors in Test_interrupt_global():
         Run 1, 02:16:22 - 02:16:27:
         command line..script /home/mool/vim/vim90/src/testdir/runtest.vim[469]..function RunTheTest[44]..Test_interrupt_global[13]..WaitForAssert[2]..<SNR>7_WaitForCommon[11]..<lambda>20 line 1: Pattern 'Interrupted' does not match 'Type  :qa!  and press...l changes and exit Vim           1,1           All'
         command line..script /home/mool/vim/vim90/src/testdir/runtest.vim[469]..function RunTheTest[44]..Test_interrupt_global[20]..WaitForAssert[2]..<SNR>7_WaitForCommon[11]..<lambda>21 line 1: Pattern 'Interrupted' does not match 'Entering Ex mode.  Type "visual" to go to Normal mode.'
 
-test_terminal3:
-Conditional jump or move depends on uninitialised value(s)
-==2819005==    at 0x2E9134: jump_to_mouse (mouse.c:2015)
-==2819005==    by 0x2E69E6: do_mouse (mouse.c:702)
-==2819005==    by 0x2E95C2: nv_mouse (mouse.c:2166)
-
-option_set():  "get a bit too much"
-    - refactor to separate function
-    - check for empty result
-
 Use :defer command:
     - Use "D" flag of writefile() and mkdir() in tests.
-	(testdir/test_c*.vim done)
-
-When using :echomessage do use msg_row and msg_col, but save and restore.
-How to test any failure?  If nothing fails perhaps it's OK alrady.
+	(testdir/test_e*.vim done)
 
-New Vim indent script: #11079  Not done yet.
+New Vim indent script: #11079  OK? 
 
 Further Vim9 improvements, possibly after launch:
+- For map(), reduce() and filter() use a specific implementation if the second
+  argument is a compiled function.  #11163
 - Use Vim9 for more runtime files.
 - Check performance with callgrind and kcachegrind.
     getline()/substitute()/setline() in #5632
@@ -228,6 +200,9 @@ reduced?
 
 Add BufDeletePost.  #11041
 
+Test property disappears when using CR twice in a row.  OK when some text was
+entered. (#11151)
+
 Add a string to the 'display' option ("smoothscroll" ?) to make CTRL-E and
 CTRL-Y scroll one screen line, also if this means the first line doesn't start
 with the first character (like what happens with a last line that doesn't
@@ -312,7 +287,9 @@ Adding "10" to 'spellsuggest' causes spell suggestions to become very slow.
 Also, z= in German on a long word can take a very long time, but CTRL-C to
 interrupt does not work. Where to add ui_breakcheck()?
 New English spell files also have very slow suggestions.
+
 French spell files don't work correctly.  #4916
+    Make Vim understand the format somehow?
 
 Make "g>" and "g<" in Visual mode move the text right or left.
 Also for a block selection.  #8558
diff --git a/runtime/doc/various.txt b/runtime/doc/various.txt
index fa4ad07d09..448091ec43 100644
--- a/runtime/doc/various.txt
+++ b/runtime/doc/various.txt
@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 9.0.  Last change: 2022 Sep 17
+*various.txt*   For Vim version 9.0.  Last change: 2022 Sep 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -29,6 +29,8 @@ CTRL-L			Clear and redraw the screen.  The redraw may happen
 			Useful to update the status line(s) when 'statusline'
 			includes an item that doesn't cause automatic
 			updating.
+			If the command line is being edited the redraw is
+			postponed until later.
 
 						*:redrawt* *:redrawtabline*
 :redrawt[abline]	Redraw the tabline.  Useful to update the tabline when
diff --git a/runtime/doc/vim9.txt b/runtime/doc/vim9.txt
index 2a953eedf8..b73011a092 100644
--- a/runtime/doc/vim9.txt
+++ b/runtime/doc/vim9.txt
@@ -1,4 +1,4 @@
-*vim9.txt*	For Vim version 9.0.  Last change: 2022 Sep 15
+*vim9.txt*	For Vim version 9.0.  Last change: 2022 Sep 19
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -962,6 +962,8 @@ In compiled Vim9 script you get:
 	3
 Generally, you should not change the list that is iterated over.  Make a copy
 first if needed.
+							*E1306*
+The depth of loops, :for and :while loops added together, cannot exceed 10.
 
 
 Conditions and expressions ~