updated for version 7.0021v7.0021

23 files changed, 1641 insertions, 437 deletions

diff --git a/runtime/doc/Makefile b/runtime/doc/Makefile
index 8da592c797..94bf805fe1 100644
--- a/runtime/doc/Makefile
+++ b/runtime/doc/Makefile
@@ -36,6 +36,7 @@ DOCS = \
 	help.txt \
 	howto.txt \
 	if_cscop.txt \
+	if_mzsch.txt \
 	if_ole.txt \
 	if_perl.txt \
 	if_pyth.txt \
@@ -156,6 +157,7 @@ HTMLS = \
 	help.html \
 	howto.html \
 	if_cscop.html \
+	if_mzsch.html \
 	if_ole.html \
 	if_perl.html \
 	if_pyth.html \
diff --git a/runtime/doc/change.txt b/runtime/doc/change.txt
index 4f371f9ded..5e45ec7ac9 100644
--- a/runtime/doc/change.txt
+++ b/runtime/doc/change.txt
@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 7.0aa.  Last change: 2004 Oct 11
+*change.txt*    For Vim version 7.0aa.  Last change: 2004 Nov 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -350,23 +350,24 @@ CTRL-X			Subtract [count] from the number or alphabetic
 The CTRL-A and CTRL-X commands work for (signed) decimal numbers, unsigned
 octal and hexadecimal numbers and alphabetic characters.  This depends on the
 'nrformats' option.
-- When 'nrformats' includes "alpha", Vim will change the alphabetic character
-  under or after the cursor.  This is useful to make lists with an alphabetic
-  index.
-- When 'nrformats' includes "hex", Vim assumes numbers starting with '0x' or
-  '0X' are hexadecimal.  The case of the rightmost letter in the number
-  determines the case of the resulting hexadecimal number.  If there is no
-  letter in the current number, Vim uses the previously detected case.
 - When 'nrformats' includes "octal", Vim considers numbers starting with a '0'
   to be octal.  Other numbers are decimal and may have a preceding minus sign.
   If the cursor is on a number, the commands apply to that number; otherwise
   Vim uses the number to the right of the cursor.
+- When 'nrformats' includes "hex", Vim assumes numbers starting with '0x' or
+  '0X' are hexadecimal.  The case of the rightmost letter in the number
+  determines the case of the resulting hexadecimal number.  If there is no
+  letter in the current number, Vim uses the previously detected case.
+- When 'nrformats' includes "alpha", Vim will change the alphabetic character
+  under or after the cursor.  This is useful to make lists with an alphabetic
+  index.
 
 For numbers with leading zeros (including all octal and hexadecimal numbers),
 Vim preserves the number of characters in the number when possible.  CTRL-A on
-"0077" results in "0100", CTRL-X on "0x100" results in "0x0ff".  Note that
-when 'nrformats' includes "octal", decimal numbers with leading zeros are
-impossible because they are indistinguishable from octal numbers.
+"0077" results in "0100", CTRL-X on "0x100" results in "0x0ff".
+
+Note that when 'nrformats' includes "octal", decimal numbers with leading
+zeros are impossible because they are indistinguishable from octal numbers.
 
 The CTRL-A command is very useful in a macro.  Example: Use the following
 steps to make a numbered list.
@@ -863,8 +864,10 @@ inside of strings can change!  Also see 'softtabstop' option. >
 							*<MiddleMouse>*
 ["x]<MiddleMouse>	Put the text from a register before the cursor [count]
 			times.  Uses the "* register, unless another is
-			specified.  Using the mouse only works when 'mouse'
-			contains 'n' or 'a'.
+			specified.  
+			Leaves the cursor at the end of the new text.
+			Using the mouse only works when 'mouse' contains 'n'
+			or 'a'.
 			{not in Vi}
 			If you have a scrollwheel and often accidentally paste
 			text, you can use these mappings to disable the
diff --git a/runtime/doc/evim-it.1 b/runtime/doc/evim-it.1
new file mode 100755
index 0000000000..644f793bb8
--- /dev/null
+++ b/runtime/doc/evim-it.1
@@ -0,0 +1,54 @@
+.TH EVIM 1 "16 febbraio 2002 "
+.SH NOME
+evim \- Vim "facile", Vim impostato in modo da poter essere usato
+facilmente per modificare file, anche da chi non abbia familiarità
+con i comandi.
+.SH SINTASSI
+.br
+.B evim
+[opzioni] [file ..]
+.br
+.B eview
+.SH DESCRIZIONE
+.B evim
+Inizia
+.B Vim
+e imposta le opzioni per farlo comportare come un editore "modeless".
+State sempre usando Vim, ma come un editore "posizionati-e-clicca".
+Simile all'uso di Notepad in MS-Windows.
+.B evim
+richiede la presenza della GUI, per avere a disposizione menu e barra
+strumenti.
+.PP
+Da usarsi solo da parte di chi non è in grado di lavorare con Vim nella
+maniera usuale.
+La modifica file sarà molto meno efficiente.
+.PP
+.B eview
+come sopra, ma parte in modalità "Sola Lettura".  Funziona come evim -R.
+.PP
+Vedere vim(1) per dettagli riguardo a Vim, opzioni, etc.
+.PP
+L'opzione 'insertmode' è impostata per poter immettere del testo direttamente.
+.br
+Sono definite delle mappature che consentono di usare COPIA e INCOLLA con i
+familiari tasti usati sotto MS-Windows.
+CTRL-X taglia testo, CTRL-C copia testo e CTRL-V incolla testo.
+Usate CTRL-Q per ottenere quello chs si ottierrebbe con CTRL-V in Vim nativo.
+.SH OPZIONI
+Vedere vim(1).
+.SH FILE
+.TP 15
+/usr/local/lib/vim/evim.vim
+Lo script caricato per inizializzare eVim.
+.SH NAC [NOTO ANCHE COME]
+Noto Anche Come "Vim per semplici".
+Quando usate evim si suppone che prendiate un fazzoletto,
+facciate un nodo ad ogni angolo e ve lo mettiate in testa.
+.SH VEDERE ANCHE
+vim(1)
+.SH AUTORE
+Buona parte di
+.B Vim
+è stato scritto da Bram Moolenaar, con molto aiuto da altri.
+Vedere il Menu "Aiuto/Crediti".
diff --git a/runtime/doc/if_ole.txt b/runtime/doc/if_ole.txt
index 9ced34ecab..06e5b42cd3 100644
--- a/runtime/doc/if_ole.txt
+++ b/runtime/doc/if_ole.txt
@@ -1,4 +1,4 @@
-*if_ole.txt*    For Vim version 7.0aa.  Last change: 2003 Jun 19
+*if_ole.txt*    For Vim version 7.0aa.  Last change: 2004 Dec 09
 
 
 		  VIM REFERENCE MANUAL    by Paul Moore
@@ -158,5 +158,41 @@ Studio.  This is called "VisVim".  It is included in the archive that contains
 the OLE version.  The documentation can be found in the runtime directory, the
 README_VisVim.txt file.
 
+
+Using Vim with Visual Studio .Net~
+
+With .Net you no longer really need VisVim, since .Net studio has support for
+external editors.  Follow these directions:
+
+In .Net Studio choose from the menu Tools->External Tools...
+Add
+     Title     - Vim
+     Command   - c:\vim\vim63\gvim.exe
+     Arguments - --servername VS_NET --remote-silent "+call cursor($(CurLine), $(CurCol))" $(ItemPath)  
+     Init Dir  - Empty
+
+Now, when you open a file in .Net, you can choose from the .Net menu:
+Tools->Vim
+
+That will open the file in Vim.
+You can then add this external command as an icon and place it anywhere you
+like.  You might also be able to set this as your default editor.
+
+If you refine this further, please post back to the Vim maillist so we have a
+record of it.
+
+--servername VS_NET 
+This will create a new instance of vim called VS_NET.  So if you open multiple
+files from VS, they will use the same instance of Vim.  This allows you to
+have multiple copies of Vim running, but you can control which one has VS
+files in it.
+
+--remote-silent "+call cursor(10, 27)" 
+              - Places the cursor on line 10 column 27
+In Vim >
+   :h --remote-silent for mor details
+
+[.Net remarks provided by Dave Fishburn and Brian Sturk]
+
 ==============================================================================
  vim:tw=78:ts=8:ft=help:norl:
diff --git a/runtime/doc/index.txt b/runtime/doc/index.txt
index 62574d4c8e..86721d535a 100644
--- a/runtime/doc/index.txt
+++ b/runtime/doc/index.txt
@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 7.0aa.  Last change: 2004 Sep 07
+*index.txt*     For Vim version 7.0aa.  Last change: 2004 Nov 30
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -328,8 +328,7 @@ tag		char	      note action in Normal mode	~
 				   characters, repeat the entered text N-1
 				   times
 |S|		["x]S		2  delete N lines [into buffer x] and start
-				   insert; synonym for "^cc" or "0cc",
-				   depending on autoindent
+				   insert; synonym for "cc".
 |T|		T{char}		1  cursor till after Nth occurrence of {char}
 				   to the left
 |U|		U		2  undo all latest changes on one line
@@ -425,7 +424,7 @@ tag		char	      note action in Normal mode	~
 |<Insert>|	<Insert>	2  same as "i"
 |<Left>|	<Left>		1  same as "h"
 |<LeftMouse>|	<LeftMouse>	1  move cursor to the mouse click position
-|<MiddleMouse>| <MiddleMouse>	2  same as "P" at the mouse click position
+|<MiddleMouse>| <MiddleMouse>	2  same as "gP" at the mouse click position
 |<PageDown>|	<PageDown>	   same as CTRL-F
 |<PageUp>|	<PageUp>	   same as CTRL-B
 |<Right>|	<Right>		1  same as "l"
diff --git a/runtime/doc/insert.txt b/runtime/doc/insert.txt
index 1b70448019..0bbf868048 100644
--- a/runtime/doc/insert.txt
+++ b/runtime/doc/insert.txt
@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 7.0aa.  Last change: 2004 Jul 04
+*insert.txt*    For Vim version 7.0aa.  Last change: 2004 Nov 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -124,6 +124,9 @@ CTRL-R {0-9a-z"%#*+:.-=}					*i_CTRL-R*
 			'-'	the last small (less than a line) delete
 			'='	the expression register: you are prompted to
 				enter an expression (see |expression|)
+				Note that 0x80 (128 decimal) is used for
+				special keys, use CTRL-R CTRL-R to insert it
+				literally.
 		See |registers| about registers.  {not in Vi}
 
 CTRL-R CTRL-R {0-9a-z"%#*+/:.-=}			*i_CTRL-R_CTRL-R*
diff --git a/runtime/doc/intro.txt b/runtime/doc/intro.txt
index 03f7315baa..0d3627c2f7 100644
--- a/runtime/doc/intro.txt
+++ b/runtime/doc/intro.txt
@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 7.0aa.  Last change: 2004 Oct 08
+*intro.txt*     For Vim version 7.0aa.  Last change: 2004 Nov 18
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -350,7 +350,7 @@ and <> are part of what you type, the context should make this clear.
 		concatenated.  For example, {a-zA-Z0-9} is any alphanumeric
 		character.
 
-							*{motion}*
+						*{motion}* *movement*
 {motion}	A command that moves the cursor.  These are explained in
 		|motion.txt|.  Examples:
 			w		to start of next word
diff --git a/runtime/doc/map.txt b/runtime/doc/map.txt
index 8c05ddc766..8cd88549c7 100644
--- a/runtime/doc/map.txt
+++ b/runtime/doc/map.txt
@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 7.0aa.  Last change: 2004 May 21
+*map.txt*       For Vim version 7.0aa.  Last change: 2004 Dec 09
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -232,8 +232,6 @@ command line (not a search pattern) the mappings are disabled until a CTRL-^
 is typed.  The state last used is remembered for Insert mode and Search
 patterns separately.  The state for Insert mode is also used when typing a
 character as an argument to command like "f" or "t".
-   When adding a ":lmap" mapping the use of these mappings in Insert mode and
-for Search patterns will be switched on.
    Language mappings will never be applied to already mapped characters.  They
 are only used for typed characters.  This assumes that the language mapping
 was already done when typing the mapping.
diff --git a/runtime/doc/motion.txt b/runtime/doc/motion.txt
index 9d149e07f3..4f9405fef4 100644
--- a/runtime/doc/motion.txt
+++ b/runtime/doc/motion.txt
@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 7.0aa.  Last change: 2004 Sep 07
+*motion.txt*    For Vim version 7.0aa.  Last change: 2004 Nov 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -814,8 +814,8 @@ was made yet in the current file.
 			area in the current buffer.  {not in Vi}.
 
 							*''* *``*
-''  ``			To the position before latest jump, or where the last
-			"m'" or "m`" command was given.  Not set when the
+''  ``			To the position before the latest jump, or where the
+			last "m'" or "m`" command was given.  Not set when the
 			|:keepjumps| command modifier was used.
 			Also see |restore-position|.
 
@@ -1240,7 +1240,7 @@ L			To line [count] from bottom of window (default: Last
 			Cursor is adjusted for 'scrolloff' option.
 
 <LeftMouse>		Moves to the position on the screen where the mouse
-			click is |inclusive|.  See also |<LeftMouse>|.  If the
+			click is |exclusive|.  See also |<LeftMouse>|.  If the
 			position is in a status line, that window is made the
 			active window and the cursor is not moved.  {not in Vi}
 
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index 769a45c707..a888d92ae0 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 7.0aa.  Last change: 2004 Oct 21
+*options.txt*	For Vim version 7.0aa.  Last change: 2004 Dec 09
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -139,6 +139,9 @@ example, if Alt-b produces <Esc>b, use this: >
 (the ^[ is a real <Esc> here, use CTRL-V <Esc> to enter it)
 The advantage over a mapping is that it works in all situations.
 
+The t_xx options cannot be set from a |modeline| or in the |sandbox|, for
+security reasons.
+
 The listing from ":set" looks different from Vi.  Long string options are put
 at the end of the list.  The number of options is quite large.  The output of
 "set all" probably does not fit on the screen, causing Vim to give the
@@ -953,6 +956,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	accidentally overwriting existing files with a backup file.  You might
 	prefer using ".bak", but make sure that you don't have files with
 	".bak" that you want to keep.
+	Only normal file name characters can be used, "/\*?[|<>" are illegal.
 
 	If you like to keep a lot of backups, you could use a BufWritePre
 	autocommand to change 'backupext' just before writing the file to
@@ -1835,7 +1839,9 @@ A jump table for the options with a short description can be found at |Q_op|.
 			everything inside quotes is ignored.  When matching a
 			paren inside quotes, it will find the matching one (if
 			there is one).  This works very well for C programs.
-								*cpo-star*
+			This flag is also used for other features, such as
+			C-indenting.
+			 					cpo-star*
 		*	Use ":*" in the same way as ":@".  When not included,
 			":*" is an alias for ":'<,'>", select the Visual area.
 								*cpo-<*
@@ -2479,6 +2485,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	type that is actually stored with the file.
 	This option is not copied to another buffer, independent of the 's' or
 	'S' flag in 'cpoptions'.
+	Only normal file name characters can be used, "/\*?[|<>" are illegal.
 
 						*'fillchars'* *'fcs'*
 'fillchars' 'fcs'	string	(default "vert:|,fold:-")
@@ -2725,6 +2732,20 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option cannot be set from a |modeline| or in the |sandbox|, for
 	security reasons.
 
+							*'fsync'* *'fs'*
+'fsync' 'fs'		boolean	(default on)
+			global
+			{not in Vi}
+	When on, the library function fsync() will be called after writing a
+	file.  This will flush a file to disk, ensuring that it is safely
+	written even on filesystems which do metadata-only journaling.  This
+	will force the harddrive to spin up on Linux systems running in laptop
+	mode, so it may be undesirable in some situations.  Be warned that
+	turning this off increases the chances of data loss after a crash.  On
+	systems without an fsync() implementation, this variable is always
+	off.
+	Also see 'swapsync' for controlling fsync() on swap files.
+
 				   *'gdefault'* *'gd'* *'nogdefault'* *'nogd'*
 'gdefault' 'gd'		boolean	(default off)
 			global
@@ -2791,6 +2812,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	the height of the cursor can be changed.  This can be done by
 	specifying a block cursor, or a percentage for a vertical or
 	horizontal cursor.
+	For a console the 't_SI' and 't_EI' escape sequences are used.
 
 	The option is a comma separated list of parts.  Each part consist of a
 	mode-list and an argument-list:
@@ -3686,6 +3708,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Setting this option to a valid keymap name has the side effect of
 	setting 'iminsert' to one, so that the keymap becomes effective.
 	'imsearch' is also set to one, unless it was -1
+	Only normal file name characters can be used, "/\*?[|<>" are illegal.
 
 					*'keymodel'* *'km'*
 'keymodel' 'km'		string	(default "")
@@ -3777,6 +3800,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	matter what $LANG is set to: >
 		:set langmenu=nl_NL.ISO_8859-1
 <	When 'langmenu' is empty, |v:lang| is used.
+	Only normal file name characters can be used, "/\*?[|<>" are illegal.
 	If your $LANG is set to a non-English language but you do want to use
 	the English menus: >
 		:set langmenu=none
@@ -4427,6 +4451,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Using 'patchmode' for compressed files appends the extension at the
 	end (e.g., "file.gz.orig"), thus the resulting name isn't always
 	recognized as a compressed file.
+	Only normal file name characters can be used, "/\*?[|<>" are illegal.
 
 					*'path'* *'pa'* *E343* *E345* *E347*
 'path' 'pa'		string	(default on Unix: ".,/usr/include,,"
@@ -4537,6 +4562,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 			feature}
 	The name of the printer to be used for |:hardcopy|.
 	See |pdev-option|.
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
 
 						*'printencoding'* *'penc'*
 'printencoding' 'penc'	String	(default empty, except for some systems)
@@ -5647,6 +5674,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	systems the swap file will not be written at all.  For a unix system
 	setting it to "sync" will use the sync() call instead of the default
 	fsync(), which may work better on some systems.
+	The 'fsync' option is used for the actual file.
 
 						*'switchbuf'* *'swb'*
 'switchbuf' 'swb'	string	(default "")
@@ -5687,6 +5715,7 @@ A jump table for the options with a short description can be found at |Q_op|.
 	Syntax autocommand event is triggered with the value as argument.
 	This option is not copied to another buffer, independent of the 's' or
 	'S' flag in 'cpoptions'.
+	Only normal file name characters can be used, "/\*?[|<>" are illegal.
 
 					*'tabstop'* *'ts'*
 'tabstop' 'ts'		number	(default 8)
@@ -6065,6 +6094,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	This option will be used for the window title when exiting Vim if the
 	original title cannot be restored.  Only happens if 'title' is on or
 	'titlestring' is not empty.
+	This option cannot be set from a |modeline| or in the |sandbox|, for
+	security reasons.
 						*'titlestring'*
 'titlestring'		string	(default "")
 			global
@@ -6649,8 +6680,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 		keys can be mapped.
 	If the menu is disabled by excluding 'm' from 'guioptions', the ALT
 	key is never used for the menu.
-	In the Win32 version, the <F10> key is handled like this too, since
-	Windows uses it to select a menu.
+	This option is not used for <F10>; on Win32 and with GTK <F10> will
+	select the menu, unless it has been mapped.
 
 						*'winheight'* *'wh'* *E591*
 'winheight' 'wh'	number	(default 1)
diff --git a/runtime/doc/pi_netrw.txt b/runtime/doc/pi_netrw.txt
index 47d0d7e7eb..4e8243dcdf 100644
--- a/runtime/doc/pi_netrw.txt
+++ b/runtime/doc/pi_netrw.txt
@@ -1,4 +1,4 @@
-*pi_netrw.txt  For Vim version 6.2.  Last change: Sep 13, 2004
+*pi_netrw.txt*  For Vim version 6.3.  Last change: Oct 08, 2004
 
 
 		VIM REFERENCE MANUAL    by Charles E. Campbell, Jr.
@@ -536,11 +536,13 @@ from <netrw.vim> itself:
      <c-l>......Refreshing the Listing..................|netrw-ctrl-l|
      o..........Browsing with a Horizontal Split........|netrw-o|
      p..........Preview Window..........................|netrw-p|
-     q..........Listing Bookmarks.......................|netrw-q|
+     q..........Listing Bookmarks and History...........|netrw-q|
      r..........Reversing Sorting Order.................|netrw-r|
      R..........Renaming Files or Directories...........|netrw-R|
      s..........Selecting Sorting Style.................|netrw-s|
      S..........Editing the Sorting Sequence............|netrw-S|
+     u..........Changing to a Predecessor Directory.....|netrw-u|
+     U..........Changing to a Successor Directory.......|netrw-U|
      v..........Browsing with a Vertical Split..........|netrw-v|
      x..........Customizing Browsing....................|netrw-x|
 
@@ -751,7 +753,7 @@ EDIT FILE OR DIRECTORY HIDING LIST				*netrw-h*
 The "<ctrl-h>" map brings up a requestor allowing the user to change the
 file/directory hiding list.  The hiding list consists of one or more patterns
 delimited by commas.  Files and/or directories satisfying these patterns will
-be hidden (ie. not shown).
+either be hidden (ie. not shown) or be the only ones displayed (see |netrw-a|).
 
 
 BROWSING WITH A HORIZONTALLY SPLIT WINDOW			*netrw-o*
@@ -802,6 +804,22 @@ One may toggle between normal and reverse sorting order by pressing the
 "r" key.
 
 
+CHANGING TO A PREDECESSOR DIRECTORY				*netrw-u*
+
+Every time you change to a new directory (new for the current session),
+netrw will save the directory in a recently-visited directory history
+list (unless g:netrw_dirhistmax is zero; by default, its ten).  With the
+"u" map, one can change to an earlier directory (predecessor).  To do
+the opposite, see |netrw-U|.
+
+
+CHANGING TO A SUCCESSOR DIRECTORY				*netrw-U*
+
+With the "U" map, one can change to a later directory (successor).
+This map is the opposite of the "u" map. (see |netrw-u|)  Use the
+q map to list both the bookmarks and history. (see |netrw-q|)
+
+
 BROWSING WITH A VERTICALLY SPLIT WINDOW				*netrw-v*
 
 Normally one enters a file or directory using the <cr>.  However, the "v"
@@ -854,7 +872,8 @@ One may easily "bookmark" a directory by using
 	{cnt}b
 
 Any count may be used.  One may use viminfo's "!" option to retain bookmarks
-between vim sessions.
+between vim sessions.  See |netrw-B| for how to return to a bookmark and
+|netrw-q| for how to list them.
 
 
 CHANGING TO A BOOKMARKED DIRECTORY				*netrw-B*
@@ -863,12 +882,14 @@ To change directory back to a bookmarked directory, use
 
 	{cnt}B
 
-Any count may be used.
+Any count may be used to reference any of the bookmarks.  See |netrw-b|
+for how to bookmark a directory and |netrw-q| for how to list them.
 
 
-LISTING BOOKMARKS						*netrw-q*
+LISTING BOOKMARKS AND HISTORY					*netrw-q*
 
-Pressing "q" will list the bookmarked directories. (query)
+Pressing "q" will list the bookmarked directories and directory traversal
+history (query). (see |netrw-b|, |netrw-B|, |netrw-u|, and |netrw-U|)
 
 
 IMPROVING DIRECTORY BROWSING				*netrw-list-hack*
@@ -991,11 +1012,26 @@ which is loaded automatically at startup (assuming :set nocp).
 	   attempting to read/write your file over the network.  Please
 	   send that information to <netrw.vim>'s maintainer,
 
-		drchipNOSPAM at campbellfamily.biz - NOSPAM
+		NdrOchip at ScampbellPfamily.AbizM - NOSPAM
 
 ==============================================================================
 10. History						*netrw-history*
 
+	v52: * nonumber'ing now set for browsing buffers
+	     * when the hiding list hid all files, error messages ensued. Fixed
+	     * when browsing, swf is set, but directory is not set, when netrw
+	       was attempting to restore options, vim wanted to save a swapfile
+	       to a local directory using an url-style path.  Fixed
+	v51: * cygwin detection now automated (using windows and &shell is bash)
+	     * customizable browser "file" rejection patterns
+	     * directory history
+	     * :[range]w url  now supported (ie. netrw has a FileWriteCmd event)
+	     * error messages have a "Press <cr> to continue" to allow them
+	       to be seen
+	     * directory browser displays no longer bother the swapfile
+	     * u/U commands to go up and down the history stack
+	     * history stack may be saved with viminfo with its "!" option
+	     * bugfixes associated with unwanted [No Files] entries
 	v50: * directories now displayed using buftype=nofile; should keep the
 	       directory names as-is
 	     * attempts to remove empty "[No File]" buffers leftover
@@ -1003,8 +1039,8 @@ which is loaded automatically at startup (assuming :set nocp).
 	     * bugfix: a "caps-lock" editing difficulty left in v49 was fixed
 	     * syntax highlighting for "Showing:" the hiding list included
 	     * bookmarks can now be retained if "!" is in the viminfo option
-	v49: * will use ftp for http://.../ browsing v48: * One may use ftp to
-	       do remote host file browsing
+	v49: * will use ftp for http://.../ browsing v48:
+	     * One may use ftp to do remote host file browsing
 	     * (windows and !cygwin) remote browsing with ftp can now use
 	       the "dir" command internally to provide listings
 	     * g:netrw_keepdir now allows one to keep the initial current
@@ -1032,9 +1068,9 @@ which is loaded automatically at startup (assuming :set nocp).
 	       listings
 	     * improved unusual file and directory name handling preview
 	     * window support
-	v47: * now handles local directory browsing.  v46: * now handles
-	remote directory browsing
-	     * g:netrw_silent (if 1) will cause all transfers to be silent'd
+	v47: * now handles local directory browsing.
+	v46: * now handles remote directory browsing
+	     * g:netrw_silent (if 1) will cause all transfers to be silent
 	v45: * made the [user@]hostname:path form a bit more restrictive to
 	       better handle errors in using protocols (e.g. scp:usr@host:file
 	       was being recognized as an rcp request) v44: * changed from
diff --git a/runtime/doc/syntax.txt b/runtime/doc/syntax.txt
index 0e147b57ab..583a784e4a 100644
--- a/runtime/doc/syntax.txt
+++ b/runtime/doc/syntax.txt
@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 7.0aa.  Last change: 2004 Oct 12
+*syntax.txt*	For Vim version 7.0aa.  Last change: 2004 Dec 09
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -640,6 +640,10 @@ c_no_if0		don't highlight "#if 0" blocks as comments
 c_no_cformat		don't highlight %-formats in strings
 c_no_c99		don't highlight C99 standard items
 
+When 'foldmethod' is set to "syntax" then /* */ comments and { } blocks will
+become a fold.  If you don't want comments to become a fold use: >
+	:let c_no_comment_fold = 1
+
 If you notice highlighting errors while scrolling backwards, which are fixed
 when redrawing with CTRL-L, try setting the "c_minlines" internal variable
 to a larger number: >
@@ -2128,6 +2132,9 @@ By default only R5RS keywords are highlighted and properly indented.
 
 MzScheme-specific stuff will be used if b:is_mzscheme or g:is_mzscheme
 variables are defined.
+ 
+Also scheme.vim supports keywords of the Chicken Scheme->C compiler.  Define
+b:is_chicken or g:is_chicken, if you need them.
 
 
 SDL						*sdl.vim* *sdl-syntax*
diff --git a/runtime/doc/tags b/runtime/doc/tags
index b3ea0e839e..4c020a1eb1 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -229,6 +229,8 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 'formatoptions'	options.txt	/*'formatoptions'*
 'formatprg'	options.txt	/*'formatprg'*
 'fp'	options.txt	/*'fp'*
+'fs'	options.txt	/*'fs'*
+'fsync'	options.txt	/*'fsync'*
 'ft'	options.txt	/*'ft'*
 'gcr'	options.txt	/*'gcr'*
 'gd'	options.txt	/*'gd'*
@@ -756,6 +758,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 't_CV'	term.txt	/*'t_CV'*
 't_Co'	term.txt	/*'t_Co'*
 't_DL'	term.txt	/*'t_DL'*
+'t_EI'	term.txt	/*'t_EI'*
 't_F1'	term.txt	/*'t_F1'*
 't_F2'	term.txt	/*'t_F2'*
 't_F3'	term.txt	/*'t_F3'*
@@ -789,6 +792,7 @@ $VIMRUNTIME	starting.txt	/*$VIMRUNTIME*
 't_KL'	term.txt	/*'t_KL'*
 't_RI'	term.txt	/*'t_RI'*
 't_RV'	term.txt	/*'t_RV'*
+'t_SI'	term.txt	/*'t_SI'*
 't_Sb'	term.txt	/*'t_Sb'*
 't_Sf'	term.txt	/*'t_Sf'*
 't_WP'	term.txt	/*'t_WP'*
@@ -4298,7 +4302,6 @@ cpo-o	options.txt	/*cpo-o*
 cpo-p	options.txt	/*cpo-p*
 cpo-r	options.txt	/*cpo-r*
 cpo-s	options.txt	/*cpo-s*
-cpo-star	options.txt	/*cpo-star*
 cpo-t	options.txt	/*cpo-t*
 cpo-u	options.txt	/*cpo-u*
 cpo-v	options.txt	/*cpo-v*
@@ -4929,7 +4932,6 @@ hebrew	hebrew.txt	/*hebrew*
 hebrew.txt	hebrew.txt	/*hebrew.txt*
 help	various.txt	/*help*
 help-context	help.txt	/*help-context*
-help-tags	tags	1
 help-translated	various.txt	/*help-translated*
 help-xterm-window	various.txt	/*help-xterm-window*
 help.txt	help.txt	/*help.txt*
@@ -5391,6 +5393,7 @@ mouse-mode-table	term.txt	/*mouse-mode-table*
 mouse-overview	term.txt	/*mouse-overview*
 mouse-swap-buttons	term.txt	/*mouse-swap-buttons*
 mouse-using	term.txt	/*mouse-using*
+movement	intro.txt	/*movement*
 ms-dos	os_msdos.txt	/*ms-dos*
 msdos	os_msdos.txt	/*msdos*
 msdos-arrows	os_msdos.txt	/*msdos-arrows*
@@ -5462,6 +5465,7 @@ netrw-B	pi_netrw.txt	/*netrw-B*
 netrw-D	pi_netrw.txt	/*netrw-D*
 netrw-R	pi_netrw.txt	/*netrw-R*
 netrw-S	pi_netrw.txt	/*netrw-S*
+netrw-U	pi_netrw.txt	/*netrw-U*
 netrw-activate	pi_netrw.txt	/*netrw-activate*
 netrw-b	pi_netrw.txt	/*netrw-b*
 netrw-bookmark	pi_netrw.txt	/*netrw-bookmark*
@@ -5507,6 +5511,7 @@ netrw-ref	pi_netrw.txt	/*netrw-ref*
 netrw-rename	pi_netrw.txt	/*netrw-rename*
 netrw-s	pi_netrw.txt	/*netrw-s*
 netrw-transparent	pi_netrw.txt	/*netrw-transparent*
+netrw-u	pi_netrw.txt	/*netrw-u*
 netrw-uidpass	pi_netrw.txt	/*netrw-uidpass*
 netrw-urls	pi_netrw.txt	/*netrw-urls*
 netrw-v	pi_netrw.txt	/*netrw-v*
@@ -5553,6 +5558,7 @@ new-indent-flex	version6.txt	/*new-indent-flex*
 new-items-6	version6.txt	/*new-items-6*
 new-items-7	version7.txt	/*new-items-7*
 new-line-continuation	version5.txt	/*new-line-continuation*
+new-manpage-trans	version7.txt	/*new-manpage-trans*
 new-multi-byte	version5.txt	/*new-multi-byte*
 new-multi-lang	version6.txt	/*new-multi-lang*
 new-network-files	version6.txt	/*new-network-files*
@@ -5690,6 +5696,7 @@ phtml-syntax	syntax.txt	/*phtml-syntax*
 phtml.vim	syntax.txt	/*phtml.vim*
 pi_expl.txt	pi_expl.txt	/*pi_expl.txt*
 pi_gzip.txt	pi_gzip.txt	/*pi_gzip.txt*
+pi_netrw.txt	pi_netrw.txt	/*pi_netrw.txt*
 pi_spec.txt	pi_spec.txt	/*pi_spec.txt*
 plugin	usr_05.txt	/*plugin*
 plugin-details	filetype.txt	/*plugin-details*
@@ -6084,6 +6091,7 @@ t_CS	term.txt	/*t_CS*
 t_CV	term.txt	/*t_CV*
 t_Co	term.txt	/*t_Co*
 t_DL	term.txt	/*t_DL*
+t_EI	term.txt	/*t_EI*
 t_F1	term.txt	/*t_F1*
 t_F2	term.txt	/*t_F2*
 t_F3	term.txt	/*t_F3*
@@ -6117,6 +6125,7 @@ t_KK	term.txt	/*t_KK*
 t_KL	term.txt	/*t_KL*
 t_RI	term.txt	/*t_RI*
 t_RV	term.txt	/*t_RV*
+t_SI	term.txt	/*t_SI*
 t_Sb	term.txt	/*t_Sb*
 t_Sf	term.txt	/*t_Sf*
 t_WP	term.txt	/*t_WP*
@@ -6299,6 +6308,8 @@ term.txt	term.txt	/*term.txt*
 termcap	term.txt	/*termcap*
 termcap-changed	version4.txt	/*termcap-changed*
 termcap-colors	term.txt	/*termcap-colors*
+termcap-cursor-color	term.txt	/*termcap-cursor-color*
+termcap-cursor-shape	term.txt	/*termcap-cursor-shape*
 termcap-syntax	syntax.txt	/*termcap-syntax*
 termcap-title	term.txt	/*termcap-title*
 terminal-colors	os_unix.txt	/*terminal-colors*
diff --git a/runtime/doc/term.txt b/runtime/doc/term.txt
index b418e4c538..b9252a93d6 100644
--- a/runtime/doc/term.txt
+++ b/runtime