patch 8.0.0029v8.0.0029

Problem:    Code for MS-Windows is complicated because of the exceptions for
            old systems.
Solution:   Drop support for MS-Windows older than Windows XP. (Ken Takata)

3 files changed, 24 insertions, 173 deletions

diff --git a/runtime/doc/gui_w32.txt b/runtime/doc/gui_w32.txt
index e4f790e721..ec69442053 100644
--- a/runtime/doc/gui_w32.txt
+++ b/runtime/doc/gui_w32.txt
@@ -49,10 +49,6 @@ If you want Vim to start with a maximized window, add this command to your
 vimrc or gvimrc file: >
 	au GUIEnter * simalt ~x
 <
-								*gui-w32s*
-There is a specific version of gvim.exe that runs under the Win32s subsystem
-of Windows 3.1 or 3.11.  See |win32s|.
-
 
 Using Vim as a plugin					*gui-w32-windowid*
 
@@ -100,9 +96,10 @@ when you have got a new version):
 You can also install Vim in the "Send To" menu:
 1. Start a Windows Explorer
 2. Navigate to your sendto directory:
-   Windows 95: %windir%\sendto (e.g. "c:\windows\sendto")
    Windows NT: %windir%\profiles\%user%\sendto (e.g.
-	       "c:\winnt\profiles\mattha\sendto").
+	       "c:\winnt\profiles\mattha\sendto")
+   Windows XP: C:\Documents and Settings\%user%\SendTo
+   Windows Vista: C:\Users\%user%\AppData\Roaming\Microsoft\Windows\SendTo .
 3. Right-click in the file pane and select New->Shortcut
 4. Follow the shortcut wizard, using the full path to VIM/GVIM.
 
@@ -274,35 +271,17 @@ WARNING: If you close this window with the "X" button, and confirm the
 question if you really want to kill the application, Vim may be killed too!
 (This does not apply to commands run asynchronously with ":!start".)
 
-In Windows 95, the window in which the commands are executed is always 25x80
-characters, to be as DOS compatible as possible (this matters!).  The default
-system font is used.  On NT, the window will be the default you have set up for
-"Console" in Control Panel.  On Win32s, the properties of the DOS box are
-determined by _default.pif in the windows directory.
-
-							*msdos-mode*
-If you get a dialog that says "This program is set to run in MS-DOS mode..."
-when you run an external program, you can solve this by changing the
-properties of the associated shortcut:
-- Use a Windows Explorer to find the command.com that is used.  It can be
-  c:\command.com, c:\dos\command.com, c:\windows\command.com, etc.
-- With the right mouse button, select properties of this command.com.
-- In the Program tab select "Advanced".
-- Unselect "MS-DOS mode".
-- Click "OK" twice.
+The window in which the commands are executed will be the default you have set
+up for "Console" in Control Panel.
 
 							*win32-!start*
 Normally, Vim waits for a command to complete before continuing (this makes
 sense for most shell commands which produce output for Vim to use).  If you
 want Vim to start a program and return immediately, you can use the following
-syntax on W95 & NT: >
+syntax: >
 	:!start [/min] {command}
 The optional "/min" causes the window to be minimized.
 
-On Win32s, you will have to go to another window instead.  Don't forget that
-you must tell Windows 3.1x to keep executing a DOS command in the background
-while you switch back to Vim.
-
 ==============================================================================
 5. Special colors					*win32-colors*
 
@@ -311,7 +290,7 @@ On Win32, the normal DOS colors can be used.  See |dos-colors|.
 Additionally the system configured colors can also be used.  These are known
 by the names Sys_XXX, where XXX is the appropriate system color name, from the
 following list (see the Win32 documentation for full descriptions).  Case is
-ignored.  Note: On Win32s not all of these colors are supported.
+ignored.
 
 Sys_3DDKShadow		Sys_3DFace			Sys_BTNFace
 Sys_3DHilight		Sys_3DHighlight			Sys_BTNHilight
diff --git a/runtime/doc/os_win32.txt b/runtime/doc/os_win32.txt
index 8bbee89501..7357542828 100644
--- a/runtime/doc/os_win32.txt
+++ b/runtime/doc/os_win32.txt
@@ -1,4 +1,4 @@
-*os_win32.txt*  For Vim version 8.0.  Last change: 2016 Aug 28
+*os_win32.txt*  For Vim version 8.0.  Last change: 2016 Oct 12
 
 
 		  VIM REFERENCE MANUAL    by George Reilly
@@ -7,20 +7,18 @@
 						*win32* *Win32* *MS-Windows*
 This file documents the idiosyncrasies of the Win32 version of Vim.
 
-The Win32 version of Vim works on Windows NT, 95, 98, ME, XP, Vista and
-Windows 7.  There are both console and GUI versions.
+The Win32 version of Vim works on Windows XP, Vista, 7, 8 and 10.  There are
+both console and GUI versions.
 
 The 32 bit version also runs on 64 bit MS-Windows systems.
 
-There is GUI version for use in the Win32s subsystem in Windows 3.1[1].  You
-can also use the 32-bit DOS version of Vim instead.  See |os_msdos.txt|.
-
 1. Known problems		|win32-problems|
 2. Startup			|win32-startup|
 3. Restore screen contents	|win32-restore|
 4. Using the mouse		|win32-mouse|
-5. Running under Windows 3.1	|win32-win3.1|
-6. Win32 mini FAQ		|win32-faq|
+5. Running under Windows 95	|win32-win95|
+6. Running under Windows 3.1	|win32-win3.1|
+7. Win32 mini FAQ		|win32-faq|
 
 Additionally, there are a number of common Win32 and DOS items:
 File locations			|dos-locations|
@@ -43,20 +41,7 @@ The GUI version was made by George V. Reilly and Robert Webb.
 For compiling see "src/INSTALLpc.txt".			*win32-compiling*
 
 ==============================================================================
-1. Known problems				*windows95* *win32-problems*
-
-There are a few known problems with running in a console on Windows 95.  As
-far as we know, this is the same in Windows 98 and Windows ME.
-
-Comments from somebody working at Microsoft: "Win95 console support has always
-been and will always be flaky".
-1.  Dead key support doesn't work.
-2.  Resizing the window with ":set columns=nn lines=nn" works, but executing
-    external commands MAY CAUSE THE SYSTEM TO HANG OR CRASH.
-3.  Screen updating is slow, unless you change 'columns' or 'lines' to a
-    non-DOS value.  But then the second problem applies!
-
-If this bothers you, use the 32 bit MS-DOS version or the Win32 GUI version.
+1. Known problems					*win32-problems*
 
 When doing file name completion, Vim also finds matches for the short file
 name.  But Vim will still find and use the corresponding long file name.  For
@@ -141,60 +126,20 @@ When the mouse doesn't work, try disabling the "Quick Edit Mode" feature of
 the console.
 
 ==============================================================================
-5. Running under Windows 3.1				*win32-win3.1*
+5. Running under Windows 95				*win32-win95*
+					*windows95* *windows98* *windowsme*
+Windows 95/98/ME support was removed in patch 8.0.0029  If you want to use it
+you will need to get a version older than that.
 
-						*win32s* *windows-3.1*
+==============================================================================
+6. Running under Windows 3.1				*win32-win3.1*
+
+					*win32s* *windows-3.1* *gui-w32s*
 There was a special version of Gvim that runs under Windows 3.1 and 3.11.
 Support was removed in patch 7.4.1363.
 
 ==============================================================================
-6. Win32 mini FAQ					*win32-faq*
-
-Q. Why does the Win32 version of Vim update the screen so slowly on Windows 95?
-A. The support for Win32 console mode applications is very buggy in Win95.
-   For some unknown reason, the screen updates very slowly when Vim is run at
-   one of the standard resolutions (80x25, 80x43, or 80x50) and the 16-bit DOS
-   version updates the screen much more quickly than the Win32 version.
-   However, if the screen is set to some other resolution, such as by ":set
-   columns=100" or ":set lines=40", screen updating becomes about as fast as
-   it is with the 16-bit version.
-
-   WARNING: Changing 'columns' may make Windows 95 crash while updating the
-   window (complaints --> Microsoft).  Since this mostly works, this has not
-   been disabled, but be careful with changing 'columns'.
-
-   Changing the screen resolution makes updates faster, but it brings
-   additional problems.  External commands (e.g., ":!dir") can cause Vim to
-   freeze when the screen is set to a non-standard resolution, particularly
-   when 'columns' is not equal to 80.  It is not possible for Vim to reliably
-   set the screen resolution back to the value it had upon startup before
-   running external commands, so if you change the number of 'lines' or
-   'columns', be very, very careful.  In fact, Vim will not allow you to
-   execute external commands when 'columns' is not equal to 80, because it is
-   so likely to freeze up afterwards.
-
-   None of the above applies on Windows NT.  Screen updates are fast, no
-   matter how many 'lines' or 'columns' the window has, and external commands
-   do not cause Vim to freeze.
-
-Q. So if the Win32 version updates the screen so slowly on Windows 95 and the
-   16-bit DOS version updates the screen quickly, why would I want to run the
-   Win32 version?
-A. Firstly, the Win32 version isn't that slow, especially when the screen is
-   set to some non-standard number of 'lines' or 'columns'.  Secondly, the
-   16-bit DOS version has some severe limitations: It can't do big changes and
-   it doesn't know about long file names.  The Win32 version doesn't have these
-   limitations and it's faster overall (the same is true for the 32-bit DJGPP
-   DOS version of Vim).  The Win32 version is smarter about handling the
-   screen, the mouse, and the keyboard than the DJGPP version is.
-
-Q. And what about the 16-bit DOS version versus the Win32 version on NT?
-A. There are no good reasons to run the 16-bit DOS version on NT.  The Win32
-   version updates the screen just as fast as the 16-bit version does when
-   running on NT.  All of the above disadvantages apply.  Finally, DOS
-   applications can take a long time to start up and will run more slowly.  On
-   non-Intel NT platforms, the DOS version is almost unusably slow, because it
-   runs on top of an 80x86 emulator.
+7. Win32 mini FAQ					*win32-faq*
 
 Q. How do I change the font?
 A. In the GUI version, you can use the 'guifont' option.  Example: >
@@ -202,47 +147,6 @@ A. In the GUI version, you can use the 'guifont' option.  Example: >
 <  In the console version, you need to set the font of the console itself.
    You cannot do this from within Vim.
 
-Q. When I change the size of the console window with ':set lines=xx' or
-   similar, the font changes! (Win95)
-A. You have the console font set to 'Auto' in Vim's (or your MS-DOS prompt's)
-   properties.  This makes W95 guess (badly!) what font is best.  Set an explicit
-   font instead.
-
-Q. Why can't I paste into Vim when running Windows 95?
-A. In the properties dialog box for the MS-DOS window, go to "MS-DOS
-   Prompt/Misc/Fast pasting" and make sure that it is NOT checked.  You should
-   also do ":set paste" in Vim to avoid unexpected effects.	|'paste'|
-
-Q. How do I type dead keys on Windows 95, in the console version?
-   (A dead key is an accent key, such as acute, grave, or umlaut, that doesn't
-   produce a character by itself, but when followed by another key, produces
-   an accented character, such as a-acute, e-grave, u-umlaut, n-tilde, and so
-   on.  Very useful for most European languages.  English-language keyboard
-   layouts don't use dead keys, as far as we know.)
-A. You don't.  The console mode input routines simply do not work correctly in
-   Windows 95, and I have not been able to work around them.  In the words
-   of a senior developer at Microsoft:
-	Win95 console support has always been and will always be flaky.
-
-	The flakiness is unavoidable because we are stuck between the world of
-	MS-DOS keyboard TSRs like KEYB (which wants to cook the data;
-	important for international) and the world of Win32.
-
-	So keys that don't "exist" in MS-DOS land (like dead keys) have a
-	very tenuous existence in Win32 console land.  Keys that act
-	differently between MS-DOS land and Win32 console land (like
-	capslock) will act flaky.
-
-	Don't even _mention_ the problems with multiple language keyboard
-	layouts...
-
-   You may be able to fashion some sort of workaround with the digraphs
-   mechanism.							|digraphs|
-
-   The best solution is to use the Win32 GUI version gvim.exe.  Alternatively,
-   you can try one of the DOS versions of Vim where dead keys reportedly do
-   work.
-
 Q. How do I type dead keys on Windows NT?
 A. Dead keys work on NT 3.51.  Just type them as you would in any other
    application.
@@ -349,28 +253,6 @@ A. You have two possible solutions depending on what you want:
 <  The first command runs notepad minimized and the second one runs it
    normally.
 
-Q. I'm using Win32s, and when I try to run an external command like "make",
-   Vim doesn't wait for it to finish!  Help!
-A. The problem is that a 32-bit application (Vim) can't get notification from
-   Windows that a 16-bit application (your DOS session) has finished.  Vim
-   includes a work-around for this, but you must set up your DOS commands to
-   run in a window, not full-screen.  Unfortunately the default when you
-   install Windows is full-screen.  To change this:
-   1) Start PIF editor (in the Main program group).
-   2) Open the file "_DEFAULT.PIF" in your Windows directory.
-   3) Changes the display option from "Full Screen" to "Windowed".
-   4) Save and exit.
-
-   To test, start Vim and type >
-	:!dir C:\<CR>".
-<  You should see a DOS box window appear briefly with the directory listing.
-
-Q. I use Vim under Win32s and NT.  In NT, I can define the console to default to
-   50 lines, so that I get a 80x50 shell when I ':sh'.  Can I do the same in
-   W3.1x, or am I stuck with 80x25?
-A. Edit SYSTEM.INI and add 'ScreenLines=50' to the [NonWindowsApp] section.  DOS
-   prompts and external DOS commands will now run in a 50-line window.
-
 						*windows-icon*
 Q. I don't like the Vim icon, can I change it?
 A. Yes, place your favorite icon in bitmaps/vim.ico in a directory of
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index 694545cf4b..e966361e77 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.0.  Last change: 2016 Oct 09
+*todo.txt*      For Vim version 8.0.  Last change: 2016 Oct 12
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -34,10 +34,6 @@ not be repeated below, unless there is extra information.
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-After 8.0 is released:
-- Drop support for older MS-Windows systems, before XP.
-  Patch from Ken Takata, updated 2016 Sep 12.
-
 +channel:
 - Problem with stderr on Windows? (Vincent Rischmann, 2016 Aug 31, #1026)
 - Add 'cwd' argument to start_job(): directory to change to in the child.
@@ -1809,10 +1805,6 @@ popup menu over it, first draw the new popup menu, remember its position and
 size and then redraw the text, skipping the characters under the popup menu.
 This should avoid flicker.  Other solution by A.Politz, 2007 Aug 22.
 
-Windows 98: pasting from the clipboard with text from another application has
-a trailing NUL.  (Joachim Hofmann)  Perhaps the length specified for CF_TEXT
-isn't right?
-
 When a register contains illegal bytes, writing viminfo in utf-8 and reading
 it back doesn't result in utf-8. (Devin Bayer)
 
@@ -2418,8 +2410,6 @@ GTK+ GUI known bugs:
 Win32 GUI known bugs:
 -   Win32: tearoff menu window should have a scrollbar when it's taller than
     the screen.
-8   On Windows 98 the unicows library is needed to support functions with UCS2
-    file names.  Can we load unicows.dll dynamically?
 8   The -P argument doesn't work very well with many MDI applications.
     The last argument of CreateWindowEx() should be used, see MSDN docs.
     Tutorial: http://win32assembly.online.fr/tut32.html