Update documentation files.

1 files changed, 20 insertions, 20 deletions

diff --git a/runtime/doc/os_vms.txt b/runtime/doc/os_vms.txt
index 0d75906289..39efcf6460 100644
--- a/runtime/doc/os_vms.txt
+++ b/runtime/doc/os_vms.txt
@@ -1,4 +1,4 @@
-*os_vms.txt*    For Vim version 7.2.  Last change: 2008 Aug 19
+*os_vms.txt*    For Vim version 7.2.  Last change: 2009 Oct 28
 
 
 		  VIM REFERENCE MANUAL
@@ -139,9 +139,9 @@ Use: >
 	define/nolog VIMRUNTIME device:[path.vim.vim60]
 	define/nolog TMP	device:[path.tmp]
 
-to get vim.exe to find its document, filetype, and syntax files, and to
+To get vim.exe to find its document, filetype, and syntax files, and to
 specify a directory where temporary files will be located.  Copy the "runtime"
-subdirectory of the vim distribution to vimruntime.
+subdirectory of the Vim distribution to vimruntime.
 
 Logicals $VIMRUNTIME and $TMP are optional.
 
@@ -217,7 +217,7 @@ You just have to define the "whole" path: >
 	$ define VIM "<server_name>[""user password""]::device:<path>"
 	$ vi*m :== "mcr VIM:VIM.EXE"
 
-as for example: >
+As for example: >
 
 	$ define VIM "PLUTO::RF10:[UTIL.VIM]"
 	$ define VIM "PLUTO""ZAY mypass""::RF10:[UTIL.VIM]" ! if passwd required
@@ -234,7 +234,7 @@ then add to the SYS$STARTUP:SYLOGICALS.COM >
 	$ define/nolog/sys VIM device:<path>
 	$ define/nolog/sys TMP SYS$SCRATCH
 
-and to the SYS$STARTUP:SYLOGIN.COM >
+And to the SYS$STARTUP:SYLOGIN.COM >
 
 	$ vi*m :== mcr VIM:VIM.EXE
 	$ gv*im:== spawn/nowait/input=NLA0 mcr VIM:VIM.EXE -g -GEOMETRY 80x40
@@ -396,7 +396,7 @@ It is possible to use Vim as an internode editor.
 
 	vi "<server>""username passwd""::<device>:<path><filename>;<version>"
 
-example: >
+Example: >
 	vi "pluto""zay passwd""::RF10:<USER.ZAY.WORK>TEST.C;1"
 
 Note: syntax is very important, otherwise VMS will recognize more parameters
@@ -418,7 +418,7 @@ and run the command procedure below: >
 	$ end:
 
 Note: Never use it in a clustered environment (you do not need it), loading
-could be very-very slow, but even faster then a local Emacs. :-)
+could be very-very slow, but even faster than a local Emacs. :-)
 
 (Zoltan Arpadffy, Vim 5.6)
 
@@ -575,12 +575,12 @@ boxes that is meant to solve GNU problems on OpenVMS.
 
 8.12 diff-mode
 
-Vim 6.0 and higher supports vim diff-mode (See |new-diff-mode|, |diff-mode|
+Vim 6.0 and higher supports Vim diff-mode (See |new-diff-mode|, |diff-mode|
 and |08.7|).  This uses the external program 'diff' and expects a Unix-like
 output format from diff.  The standard VMS diff has a different output
-format.  To use vim on VMS in diff-mode, you need to:
+format.  To use Vim on VMS in diff-mode, you need to:
     1 Install a Unix-like diff program, e.g. GNU diff
-    2 Tell vim to use the Unix-like diff for diff-mode.
+    2 Tell Vim to use the Unix-like diff for diff-mode.
 
 You can download GNU diff from the VIM-VMS website, it is one of the GNU
 tools in http://www.polarhome.com/vim/files/gnu_tools.zip.  I suggest to
@@ -594,7 +594,7 @@ prompt: >
 
    GDIFF :==     $GNU:DIFF.EXE
 
-Now you need to tell vim to use the new diff program.  Take the example
+Now you need to tell Vim to use the new diff program.  Take the example
 settings from |diff-diffexpr| and change the call to the external diff
 program to the new diff on VMS.  Add this to your .vimrc file: >
 
@@ -615,7 +615,7 @@ program to the new diff on VMS.  Add this to your .vimrc file: >
 	endfunction
       endif
 
-You can now use vim in diff-mode, e.g. to compare two files in read-only
+You can now use Vim in diff-mode, e.g. to compare two files in read-only
 mode: >
 
     $ VIM -D/R <FILE1> <FILE2>
@@ -638,7 +638,7 @@ You can now compare files in 4 ways: >
 8.13 Allow '$' in C keywords
 
 DEC C uses many identifiers with '$' in them.  This is not allowed in ANSI C,
-and vim recognises the '$' as the end of the identifier.  You can change this
+and Vim recognises the '$' as the end of the identifier.  You can change this
 with the |iskeyword|command.
 Add this command to your .vimrc file: >
 
@@ -667,7 +667,7 @@ start it with: >
 
 8.14 Slow start in console mode issue
 
-As GUI/GTK Vim works equally well in console mode, many administartors
+As GUI/GTK Vim works equally well in console mode, many administrators
 deploy those executables system wide.
 Unfortunately, on a remote slow connections GUI/GTK executables behave rather
 slow when user wants to run Vim just in the console mode - because of X environment detection timeout.
@@ -680,7 +680,7 @@ both GUI/GTK build and just console build executables, like below: >
     |----- syntax        
        vimrc    (system rc files)
        gvimrc
-       gvim.exe (the remaned GUI or GTK built vim.exe)      
+       gvim.exe (the renamed GUI or GTK built vim.exe)      
        vim.exe  (the console only executable) 
 
 Define system symbols like below in for ex in LOGIN.COM or SYLOGIN.COM: >
@@ -713,11 +713,11 @@ View of Cluster from system ID 11655  node: TOR
 ¦ ODIN   ¦ VMS V7.3-2   ¦ MEMBER  ¦
 +---------------------------------+
 
-It is convinient to have a common VIM directory but execute different
+It is convenient to have a common VIM directory but execute different
 executables. 
 There are more solutions for this problem:
 
-solution 1. all executables in the same directory with different names
+Solution 1.  All executables in the same directory with different names
 This is easily done with the following script that can be added
 to the login.com or sylogin.com: >
 
@@ -737,7 +737,7 @@ to the login.com or sylogin.com: >
 	$      vi*m :== mcr vim:VIM.EXE_IA64
 	$ endif
 
-solution 2. different directories: >
+Solution 2.  Different directories: >
 
 	$ if f$getsyi("NODE_HWTYPE") .eqs. "VAX"
 	$ then
@@ -757,8 +757,8 @@ solution 2. different directories: >
         $! VIMRUNTIME must be defined in order to find runtime files
 	$ define/nolog VIMRUNTIME RF10:[UTIL.VIM72]
 
-A good examle for this approach is the [GNU]gnu_tools.com script from GNU_TOOLS.ZIP
-package downloadable from http://www.polarhome.com/vim/
+A good example for this approach is the [GNU]gnu_tools.com script from
+GNU_TOOLS.ZIP package downloadable from http://www.polarhome.com/vim/
 
 (Zoltan Arpadffy, Vim 7.2)