| Age | Commit message (Collapse) | Author |
|---|
|
ssltest_old.c is deprecated. New tests should use ssl_test.c, and the
recipes in 80-test_ssl_new.t
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #2452
|
|
Misc fixes for no-sock
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reduces #ifdef complexity.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1824
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1824
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1824
|
|
All OpenSSL code has now been transferred to use the new threading API,
so the old one is no longer used and can be removed. We provide some compat
macros for removed functions which are all no-ops.
There is now no longer a need to set locking callbacks!!
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The new Rand usage of Thread API exposed a bug in ssltest. ssltest "cheats"
and uses internal headers to directly call functions that normally you
wouldn't be able to do. This means that auto-init doesn't happen, and
therefore auto-deinit doesn't happen either, meaning that the new rand locks
don't get cleaned up properly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Compiling ssltest with some compilers using --strict-warnings results in
complaints about an unused result.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
* Perform ALPN after the SNI callback; the SSL_CTX may change due to
that processing
* Add flags to indicate that we actually sent ALPN, to properly error
out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Disabled by default, but can be enabled by setting the
ct_validation_callback on a SSL or SSL_CTX.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Remove the need to explicitly initialise/deinitialise for the tests
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Some platforms do not have the latter.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
This adds a couple of simple tests to see that SSL traffic using the
reimplemented BIO_s_accept() and BIO_s_connect() works as expected,
both on IPv4 and on IPv6.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Some users want to disable SSL 3.0/TLS 1.0/TLS 1.1, and enable just
TLS 1.2. In the future they might want to disable TLS 1.2 and
enable just TLS 1.3, ...
This commit makes it possible to disable any or all of the TLS or
DTLS protocols. It also considerably simplifies the SSL/TLS tests,
by auto-generating the min/max version tests based on the set of
supported protocols (425 explicitly written out tests got replaced
by two loops that generate all 425 tests if all protocols are
enabled, fewer otherwise).
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Also always abort() on leak failure.
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
(Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
MR: #364
|
|
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
|
|
SSL_{CTX}_set_tmp_ecdh() allows to set 1 EC curve and then tries to use it. On
the other hand SSL_{CTX_}set1_curves() allows you to set a list of curves, but
only when SSL_{CTX_}set_ecdh_auto() was called to turn it on.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
|
|
The feature_test_macros(7) manual tells us that _BSD_SOURCE is
deprecated since glibc 2.20 and that the compiler will warn about it
being used, unless _DEFAULT_SOURCE is defined as well.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
-Wincompatible-pointer-types-discards-qualifiers (the latter did not require
any code changes).
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
The test executables use standard output and standard error for text output,
so let's open the corresponding BIOs in text mode.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Use SSL_CONF for certificate handling is ssltest.c, this changes the
behaviour slightly: the -cert and -key options are no longer recognised
and a default certificate file is not used.
This change means that -s_cert and -c_cert can be used mode than once
to support use of multiple certificates.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
In master, the 'dh' command is gone, so use 'dhparam' instead to
determine if we're compiled with DH.
Also, set "@SECLEVEL=1" for the weak DH test, so that it actually
passes.
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
|
|
Also add more ciphersuite test coverage, and a negative test for
512-bit DHE.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 1ee85aab75d7c9f20058f781bfe9222323df08eb)
|
|
default (client).
Also reorder preferences to prefer prime curves to binary curves, and P-256 to everything else.
The result:
$ openssl s_server -named_curves "auto"
This command will negotiate an ECDHE ciphersuite with P-256:
$ openssl s_client
This command will negotiate P-384:
$ openssl s_client -curves "P-384"
This command will not negotiate ECDHE because P-224 is disabled with "auto":
$ openssl s_client -curves "P-224"
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
This commit changes the way that we do server side protocol version
negotiation. Previously we had a whole set of code that had an "up front"
state machine dedicated to the negotiating the protocol version. This adds
significant complexity to the state machine. Historically the justification
for doing this was the support of SSLv2 which works quite differently to
SSLv3+. However, we have now removed support for SSLv2 so there is little
reason to maintain this complexity.
The one slight difficulty is that, although we no longer support SSLv2, we
do still support an SSLv3+ ClientHello in an SSLv2 backward compatible
ClientHello format. This is generally only used by legacy clients. This
commit adds support within the SSLv3 code for these legacy format
ClientHellos.
Server side version negotiation now works in much the same was as DTLS,
i.e. we introduce the concept of TLS_ANY_VERSION. If s->version is set to
that then when a ClientHello is received it will work out the most
appropriate version to respond with. Also, SSLv23_method and
SSLv23_server_method have been replaced with TLS_method and
TLS_server_method respectively. The old SSLv23* names still exist as
macros pointing at the new name, although they are deprecated.
Subsequent commits will look at client side version negotiation, as well of
removal of the old s23* code.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
Remove RFC2712 Kerberos support from libssl. This code and the associated
standard is no longer considered fit-for-purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Since COMP_METHOD is now defined in comp_lcl.h, it is no
longer possible to create new TLS compression methods without
using the OpenSSL source. Only ZLIB is supported by default.
Also, since the types are opaque, #ifdef guards to use "char *"
instead of the real type aren't necessary.
The changes are actually minor. Adding missing copyright to some
files makes the diff misleadingly big.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
For the various string-compare routines (strcmp, strcasecmp, str.*cmp)
use "strcmp()==0" instead of "!strcmp()"
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
RLE is a no-op only for testing. Remove it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Don't check for NULL before calling OPENSSL_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
This gets BN_.*free:
BN_BLINDING_free BN_CTX_free BN_FLG_FREE BN_GENCB_free
BN_MONT_CTX_free BN_RECP_CTX_free BN_clear_free BN_free BUF_MEM_free
Also fix a call to DSA_SIG_free to ccgost engine and remove some #ifdef'd
dead code in engines/e_ubsec.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Make only errors go to stderr.
Print count and size before the loop, so you can see it's an 838K
message that will take a few moments.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
