openssl - Mirror of https://github.com/openssl/openssl

Age	Commit message (Expand)	Author
2016-08-30	Add some CertStatus tests	Matt Caswell
2016-08-18	Port multi-buffer tests	Emilia Kasper
2016-08-16	SSL tests: send some application data	Emilia Kasper
2016-08-10	Add TEST_check	Emilia Kasper
2016-08-10	SSL tests: port CT tests, add a few more	Emilia Kasper
2016-08-10	SSL test ctx: fix tests	Emilia Kasper
2016-08-08	Reorganize SSL test structures	Emilia Kasper
2016-08-01	Fix various no-*s.	Ben Laurie
2016-07-20	SSL test framework: port resumption tests	Emilia Kasper
2016-07-19	SSL test framework: port NPN and ALPN tests	Emilia Kasper
2016-06-28	SSL test framework: port SNI tests	Emilia Kasper
2016-06-13	Port DTLS version negotiation tests	Emilia Kasper
2016-06-13	Clean up following new SNI tests	Emilia Kasper
2016-06-09	Fix session ticket and SNI	Todd Short
2016-05-17	Copyright consolidation 02/10	Rich Salz
2016-05-12	Remove proxy tests. Add verify callback tests.	Emilia Kasper
2016-04-05	testutil: return 1 on success	Emilia Kasper
2016-04-05	New SSL test framework	Emilia Kasper

/* * linux/arch/arm/mach-omap2/board-omap3beagle.c * * Copyright (C) 2008 Texas Instruments * * Modified from mach-omap2/board-3430sdp.c * * Initial code: Syed Mohammed Khasim * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> #include <linux/leds.h> #include <linux/gpio.h> #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/opp.h> #include <linux/cpu.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/mmc/host.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> #include <linux/platform_data/mtd-nand-omap2.h> #include "common.h" #include "omap_device.h" #include "gpmc.h" #include "soc.h" #include "mux.h" #include "hsmmc.h" #include "pm.h" #include "board-flash.h" #include "common-board-devices.h" #define NAND_CS 0 /* * OMAP3 Beagle revision * Run time detection of Beagle revision is done by reading GPIO. * GPIO ID - * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1 * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0 * C4 = GPIO173, GPIO172, GPIO171: 1 0 1 * XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0 * XMC = GPIO173, GPIO172, GPIO171: 0 1 0 */ enum { OMAP3BEAGLE_BOARD_UNKN = 0, OMAP3BEAGLE_BOARD_AXBX, OMAP3BEAGLE_BOARD_C1_3, OMAP3BEAGLE_BOARD_C4, OMAP3BEAGLE_BOARD_XM, OMAP3BEAGLE_BOARD_XMC, }; static u8 omap3_beagle_version; /* * Board-specific configuration * Defaults to BeagleBoard-xMC */ static struct { int mmc1_gpio_wp; int usb_pwr_level; int dvi_pd_gpio; int usr_button_gpio; int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, .usb_pwr_level = GPIOF_OUT_INIT_LOW, .dvi_pd_gpio = -EINVAL, .usr_button_gpio = 4, .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, }; static struct gpio omap3_beagle_rev_gpios[] __initdata = { { 171, GPIOF_IN, "rev_id_0" }, { 172, GPIOF_IN, "rev_id_1" }, { 173, GPIOF_IN, "rev_id_2" }, }; static void __init omap3_beagle_init_rev(void) { int ret; u16 beagle_rev = 0; omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP); omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP); omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP); ret = gpio_request_array(omap3_beagle_rev_gpios, ARRAY_SIZE(omap3_beagle_rev_gpios)); if (ret < 0) { printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; return; } beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) | (gpio_get_value(173) << 2); gpio_free_array(omap3_beagle_rev_gpios, ARRAY_SIZE(omap3_beagle_rev_gpios)); switch (beagle_rev) { case 7: printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; beagle_config.mmc1_gpio_wp = 29; beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 6: printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; beagle_config.mmc1_gpio_wp = 23; beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 5: printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; beagle_config.mmc1_gpio_wp = 23; beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 0: printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH; beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; break; case 2: printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC; beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; break; default: printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; } } static struct mtd_partition omap3beagle_nand_partitions[] = { /* All the partition sizes are listed in terms of NAND block size */ { .name = "X-Loader", .offset = 0, .size = 4 * NAND_BLOCK_SIZE, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "U-Boot", .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ .size = 15 * NAND_BLOCK_SIZE, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "U-Boot Env", .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ .size = 1 * NAND_BLOCK_SIZE, }, { .name = "Kernel", .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ .size = 32 * NAND_BLOCK_SIZE, }, { .name = "File System", .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ .size = MTDPART_SIZ_FULL, }, }; /* DSS */ static struct tfp410_platform_data dvi_panel = { .i2c_bus_num = 3, .power_down_gpio = -1, }; static struct omap_dss_device beagle_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; static struct omap_dss_device beagle_tv_device = { .name = "tv", .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, }; static struct omap_dss_device *beagle_dss_devices[] = { &beagle_dvi_device, &beagle_tv_device, }; static struct omap_dss_board_info beagle_dss_data = { .num_devices = ARRAY_SIZE(beagle_dss_devices), .devices = beagle_dss_devices, .default_device = &beagle_dvi_device, }; #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA, .gpio_wp = -EINVAL, .deferred = true, }, {} /* Terminator */ }; static struct regulator_consumer_supply beagle_vmmc1_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; static struct regulator_consumer_supply beagle_vsim_supply[] = { REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { int r; mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap_hsmmc_late_init(mmc); /* * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active * high / others active low) * DVI reset GPIO is different between beagle revisions */ /* Valid for all -xM revisions */ if (cpu_is_omap3630()) { /* * gpio + 1 on Xm controls the TFP410's enable line (active low) * gpio + 2 control varies depending on the board rev as below: * P7/P8 revisions(prototype): Camera EN * A2+ revisions (production): LDO (DVI, serial, led blocks) */ r = gpio_request_one(gpio + 1, GPIOF_OUT_INIT_LOW, "nDVI_PWR_EN"); if (r)