Age | Commit message (Collapse) | Author |
|
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24332)
|
|
It will work only if OSSL_DIGEST_PARAM_XOFLEN is set.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/24105)
|
|
- add test vectors for tls1_3 integrity-only ciphers
- recmethod_local.h: add new member for MAC
- tls13_meth.c: add MAC only to tls 1.3
- tls13_enc.c: extend function to add MAC only
- ssl_local.h: add ssl_cipher_get_evp_md_mac()
- s3_lib.c: add the new ciphers and add #ifndef OPENSSL_NO_INTEGRITY_ONLY_CIPHERS
- ssl_ciph.c : add ssl_cipher_get_evp_md_mac() and use it
- tls13secretstest.c: add dummy test function
- Configure: add integrity-only-ciphers option
- document the new ciphers
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22903)
|
|
Fixes #24300. The current values of SSL_R_NO_APPLICATION_PROTOCOL and
SSL_R_PSK_IDENTITY_NOT_FOUND don't allow for a correct lookup of the
corresponding reason strings.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24351)
|
|
and an addition of an empty line to follow the code style
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23721)
|
|
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24172)
|
|
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24275)
|
|
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24275)
|
|
It is not used anywhere else than in tests.
Fixes #22965
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23269)
|
|
And create a new BN_generate_dsa_nonce() that corrects the BIGNUM top.
We do this to avoid leaking fixed top numbers via the public API.
Also add a slight optimization in ossl_bn_gen_dsa_nonce_fixed_top()
and make it LE/BE agnostic.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24265)
|
|
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24265)
|
|
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24265)
|
|
Co-authored-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24265)
|
|
Introduce the capability to retrieve and update Certificate Revocation Lists
(CRLs) in the CMP client, as specified in section 4.3.4 of RFC 9483.
To request a CRL update, the CMP client can send a genm message with the
option -infotype crlStatusList. The server will respond with a genp message
containing the updated CRL, using the -infoType id-it-crls. The client can
then save the CRL in a specified file using the -crlout parameter.
Co-authored-by: Rajeev Ranjan <ranjan.rajeev@siemens.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23768)
|
|
Several of the attribute values defined for use by attribute certificates
use multi-valued data in an ASN.1 SEQUENCE. Allow reading of these values
from a configuration file, similar to how generic X.509 extensions are
handled.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
|
|
The IETFAtrrSyntax type is used for the values of several attributes
defined in RFC 5755 for use with attribute certificates.
Specifically this type is used with the "Charging Identity" and
"Group" attributes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
|
|
Add API to manage attribute certificate extensions
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
|
|
Add functions to print an attribute certificate. Several
attribute value types defined by the RFC 5755 specification
are multi-field values (i.e ASN1_SEQUENCE rather than an ASN1_STRING
or similar format). Currently those values are printed using
`ASN1_item_print`. A more user-friendly output mechanism (maybe
similar to the i2r_ functions used for X509 extensions) could be
added in future.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
|
|
Only fields that are allowed by RFC 5755 are
accessible through this API. Fields that are only supported
in version 1 attribute certificates (e.g. the AttCertIssuer
v1Form fields) are not implemented.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
|
|
Add support for attribute certificates (v2) as described
in RFC 5755 profile.
Attribute certificates provide a mechanism to manage authorization
information separately from the identity information provided by
public key certificates.
This initial patch adds the ASN.1 definitions
and I/O API. Accessor functions for the certificate fields
will be added in subsequent patches.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
|
|
FLOSS is no longer a dependency for NonStop as of the deprecation of the SPT
thread model builds.
Fixes: #24214
Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24217)
|
|
Create a new hashtable that is more efficient than the existing LHASH_OF
implementation. the new ossl_ht api offers several new features that
improve performance opportunistically
* A more generalized hash function. Currently using fnv1a, provides a
more general hash function, but can still be overridden where needed
* Improved locking and reference counting. This hash table is
internally locked with an RCU lock, and optionally reference counts
elements, allowing for users to not have to create and manage their
own read/write locks
* Lockless operation. The hash table can be configured to operate
locklessly on the read side, improving performance, at the sacrifice
of the ability to grow the hash table or delete elements from it
* A filter function allowing for the retrieval of several elements at a
time matching a given criteria without having to hold a lock
permanently
* a doall_until iterator variant, that allows callers which need to
iterate over the entire hash table until a given condition is met (as
defined by the return value of the iterator callback). This allows
for callers attempting to do expensive cache searches for a small
number of elements to terminate the iteration early, saving cpu cycles
* Dynamic type safety. The hash table provides operations to set and
get data of a specific type without having to define a type at the
instatiation point
* Multiple data type storage. The hash table can store multiple data
types allowing for more flexible usage
* Ubsan safety. Because the API deals with concrete single types
(HT_KEY and HT_VALUE), leaving specific type casting to the call
recipient with dynamic type validation, this implementation is safe
from the ubsan undefined behavior warnings that require additional
thunking on callbacks.
Testing of this new hashtable with an equivalent hash function, I can
observe approximately a 6% performance improvement in the lhash_test
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23671)
|
|
Generally we can get away with just using CRYPTO_atomic_load to do
stores by reversing the source and target variables, but doing so
creates a problem for the thread sanitizer as CRYPTO_atomic_load hard
codes an __ATOMIC_ACQUIRE constraint, which confuses tsan into thinking
that loads and stores aren't properly ordered, leading to RAW/WAR
hazzards getting reported. Instead create a CRYPTO_atomic_store api
that is identical to the load variant, save for the fact that the value
is a unit64_t rather than a pointer that gets stored using an
__ATOMIC_RELEASE constraint, satisfying tsan.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23671)
|
|
Currently, rcu has a global bit of data, the CRYPTO_THREAD_LOCAL object
to store per thread data. This works in some cases, but fails in FIPS,
becuase it contains its own copy of the global key.
So
1) Make the rcu_thr_key a per-context variable, and force
ossl_rcu_lock_new to be context aware
2) Store a pointer to the context in the lock object
3) Use the context to get the global thread key on read/write lock
4) Use ossl_thread_start_init to properly register a cleanup on thread
exit
5) Fix up missed calls to OSSL_thread_stop() in our tests
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24162)
|
|
Also wrap X509v3_KU_UNDEF in `#ifndef OPENSSL_NO_DEPRECATED_3_4`.
Fixes #22955
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24138)
|
|
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24040)
(cherry picked from commit 5a13d35f243be66f6ad914aefe99fb708812dff1)
|
|
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24040)
(cherry picked from commit 3c2bc702eb9287b84e8584ad427e72da0ab21ec1)
|
|
Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 0ce7d1f355c1240653e320a3f6f8109c1f05f8c0)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24034)
|
|
References: draft-ietf-sidrops-rpki-prefixlist
Title: "A profile for Signed Prefix Lists for Use in the Resource Public Key Infrastructure (RPKI)"
OID assigned under 'SMI Security for S/MIME CMS Content Type (1.2.840.113549.1.9.16.1)'
https://www.iana.org/assignments/smi-numbers/smi-numbers.xhtml#security-smime-1
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23426)
|
|
Fixes #22893
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23526)
|
|
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23745)
|
|
Change introduces a default limit on HTTP headers we expect to receive
from server to 256. If limit is exceeded http client library indicates
HTTP_R_RESPONSE_TOO_MANY_HDRLINES error. Application can use
OSSL_HTTP_REQ_CTX_set_max_response_hdr_lines() to change default.
Setting limit to 0 implies no limit (current behavior).
Fixes #22264
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23781)
|
|
Fixes #23655
BIO_get_new_index() returns a range of 129..255.
It is set to BIO_TYPE_START (128) initially and is incremented on each
call.
>= 256 is reserved for the class type flags (BIO_TYPE_DESCRIPTOR) so it
should error if it reaches the upper bound.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23732)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23584)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23598)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23598)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21660)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/21660)
|
|
According to FIPS 140-3 IG 10.3.A Additonal Comment 1, a PCT shall be
performed consistent with the intended use of the keys.
This commit implements PCT for EDDSA via performing sign and verify
operations after key generated.
Also use the same pairwise test logic in EVP_PKEY_keygen and
EVP_PKEY_pairwise_check for EDDSA in FIPS_MODULE.
Add OSSL_SELF_TEST_DESC_PCT_EDDSA to OSSL_PROVIDER-FIPS page.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23408)
|
|
ITU-T X.690 / ISO/IEC 8825-1 section 11.7 and section 11.8
impose specific constraints on how GeneralizedTime and UTCTime
can be encoded in BER/CER/DER. Following from these constraints
a minimum length can be derived.
Checking the length in this context can potentially help prevent
applications from interpreting an invalid GeneralizedTime as a
valid UTCTime.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23483)
|
|
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21206)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23535)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23535)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23535)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23535)
|
|
The following files
include/openssl/hpke.h
crypto/hpke/hpke.c
crypto/ec/asm/ecp_sm2p256-armv8.pl
crypto/chacha/asm/chacha-loongarch64.pl
still seem to be released under the OpenSSL License instead of the Apache 2 license.
Fixes #23570
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23576)
|
|
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23545)
|
|
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23495)
|