| Age | Commit message (Collapse) | Author |
|---|
|
After December 31, 2023, SP 800-131Ar2 [0] no longer allows PKCS#1 v1.5
padding for RSA "key-transport" (aka encryption and decryption).
There's a few good options to replace this usage in the RSA PCT, but
the simplest is verifying m = (m^e)^d mod n, (where 1 < m < (n − 1)).
This is specified in SP 800-56Br2 (Section 6.4.1.1) [1] and allowed by
FIPS 140-3 IG 10.3.A. In OpenSSL, this corresponds to RSA_NO_PADDING.
[0]: https://doi.org/10.6028/NIST.SP.800-131Ar2
[1]: https://doi.org/10.6028/NIST.SP.800-56Br2
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23832)
|
|
After December 31, 2023, SP 800-131Ar2 [0] no longer allows PKCS#1 v1.5
padding for RSA "key-transport" (aka encryption and decryption).
There's a few good options to replace this usage in the RSA PCT, but
signature generation and verification using PKCS#1 v1.5 padding (which
remains approved) is the simplest.
[0]: https://doi.org/10.6028/NIST.SP.800-131Ar2
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23832)
|
|
It turns out that we didn't allow the combination RSA + SM3 anywhere.
This is perfectly reasonable in the FIPS module, but less so in the default
provider. This change enables it in the default provider, and adds a simple
evp_test stanza for the RSA-SM3 signature scheme.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23416)
|
|
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25115)
|
|
In FIPS 140-3, RSA Signing with X9.31 padding is not approved,
but verification is allowed for legacy purposes. An indicator has been added
for RSA signing with X9.31 padding.
A strict restriction on the size of the RSA modulus has been added
i.e. It must be 1024 + 256 * s (which is part of the ANSI X9.31 spec).
Added implementation comments to the X9.31 padding code
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24021)
|
|
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22097)
|
|
Coverity recently flaged an error in which the return value for
EVP_MD_get_size wasn't checked for negative values prior to use, which
can cause underflow later in the function.
Just add the check and error out if get_size returns an error.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24896)
|
|
As suggested at https://github.com/openssl/openssl/pull/23280#discussion_r1452113014, removing hard coded value for cap.
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/23311)
|
|
NIST SP 800-56 rev2 only allows using approved hash algorithms in
OAEP. Unlike FIPS 186-5 it doesn't have text allowing to use XOF SHAKE
functions. Maybe future revisions of SP 800-56 will adopt similar text
to FIPS 186-5 and allow XOF as MD and MGF (not MGF1).
RFC documents do not specify if SHAKE is allowed or blocked for usage
(i.e. there is no equivalent of RFC 8692 or RFC 8702 for OAEP). Status
quo allows their usage.
Add test cases for SHAKE in RSA-OAEP as allowed in default provider,
and blocked in fips.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24387)
|
|
this is rquired by fipd-186-5 section A.1.6, step 7:
Zeroize the internally generated values that are not returned
In OpenSSL code we need to zero p, q members of rsa structure. The rsa
structure is provided by ossl_rsa_fips186_4_gen_prob_primes() caller.
The remaining values (variables) mentioned by standard are zeroed
already in functions we call from ossl_rsa_fips186_4_gen_prob_primes().
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24358)
|
|
ISO 19790:2012/Cor.1:2015 7.9 requires cryptographic module to provide
methods to zeroise all unproctected security sensitive parameters
(which inclues both Critical/Private **and** Public security
parameters). And those that are temprorarly stored are required to be
zeroised after they are no longer needed at security levels 2 and
higher.
Comply with the above requirements by always zeroising public security
parameters whenever they are freed.
This is currently done under the FIPS feature, however the requirement
comes from the ISO 19790:2012 which may also be needed in other
jurisdictions. If not always. Note FIPS 140-3 includes ISO 19790:2012
by reference.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24355)
|
|
Fixes #24051
RSA with 'no padding' corresponds to RSAEP/RSADP.
The code was not checking the lower bounds.
The bounds are specified in SP800-56Br2, section 7.1.1.1 and 7.1.2.1
Note that RFC8017 expresses the range in a sentence using the word
between, and there is some ambiguity in this.
The upper bounds have change to match the definition in SP800.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24061)
|
|
Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 0ce7d1f355c1240653e320a3f6f8109c1f05f8c0)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24034)
|
|
Add the checks for the return value of EVP_MD_CTX_get_size() before explicitly
cast them to size_t to avoid the integer overflow.
Fixes: 75d44c0452 ("Store digests as EVP_MD instead of a NID.")
Signed-off-by: Jiasheng Jiang <jiasheng@purdue.edu>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23953)
|
|
Add the check for the EVP_MD_get_size() to avoid invalid negative numbers.
Fixes: 17c63d1cca ("RSA PSS ASN1 signing method")
Signed-off-by: Jiasheng Jiang <jiasheng@purdue.edu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23973)
|
|
Fixes CVE-2023-6237
If a large and incorrect RSA public key is checked with
EVP_PKEY_public_check() the computation could take very long time
due to no limit being applied to the RSA public key size and
unnecessarily high number of Miller-Rabin algorithm rounds
used for non-primality check of the modulus.
Now the keys larger than 16384 bits (OPENSSL_RSA_MAX_MODULUS_BITS)
will fail the check with RSA_R_MODULUS_TOO_LARGE error reason.
Also the number of Miller-Rabin rounds was set to 5.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23243)
|
|
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23253)
|
|
It would be helpful to be able to generate RSA's dmp1/dmq1/iqmp values
when not provided in the param list to EVP_PKEY_fromdata. Augment the
provider in ossl_rsa_fromdata to preform this generation iff:
a) At least p q n e and e are provided
b) the new parameter OSSL_PARAM_RSA_DERIVE_PQ is set to 1
Fixes #21826
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21875)
|
|
Make EVP_PKEY_CTX_set_rsa_oaep_md() and
EVP_PKEY_CTX_get_rsa_oaep_md_name() only work for RSA keys.
Since these calls use "digest" as a OSSL_PARAM, they should not
work for other key types.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20319)
|
|
The code did not yet check that the length of the RSA key is positive
and even.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22403)
|
|
Its not required that crt params be available in an RSA key, so don't
perform an error check on them
Fixes #29135
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22334)
|
|
Theres no reason we should gate ossl_rsa_todata on there being a minimum
set of parameters. EVP_PKEY_todata makes no guarantees about the
validity of a key, it only returns the parameters that are set in the
requested key, whatever they may be. Remove the check.
Fixes #21935
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22334)
|
|
According to the manual page, EVP_PKEY_CTX_set0_rsa_oaep_label()
should accept NULL as the label argument, though the function
currently rejects it while setting the corresponding octet string
parameter with OSSL_PARAM_construct_octet_string, which expects
non-NULL input. This adds a workaround to the caller for backward
compatibility.
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22397)
|
|
That seems to be only an issue for RSA-PSS with parameters.
Spotted by code review, so it looks like there is no test coverage for this.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22032)
|
|
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21468)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Release: yes
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21401)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/21341)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21260)
|
|
Typos in doc/man* will be fixed in a different commit.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20910)
|
|
Fixes regression of RSA signatures for legacy keys caused
by quering the provider for the algorithm id with parameters.
Legacy keys do not have a method that would create the
algorithm id. So we revert to what was done in 3.0.7 and
earlier versions for these keys.
Fixes #21008
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21019)
|
|
We optimise locking in rsa_get_blinding() so that we normally take a
read lock, and only fallback to a write lock if we need to. This will
be very slightly slower in the case of single use RSA objects, but should
be significantly better when an RSA object is reused in a multi-threaded
environment. It's probably worth the trade off.
Partially fixes #20286
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20953)
|
|
Added coverage test that failed without the change.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19677)
|
|
We swap p and q in that case except when ACVP tests are being run.
Fixes #20823
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20833)
|
|
Fixes #20693
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/20708)
|
|
This is about a timing leak in the topmost limb
of the internal result of RSA_private_decrypt,
before the padding check.
There are in fact at least three bugs together that
caused the timing leak:
First and probably most important is the fact that
the blinding did not use the constant time code path
at all when the RSA object was used for a private
decrypt, due to the fact that the Montgomery context
rsa->_method_mod_n was not set up early enough in
rsa_ossl_private_decrypt, when BN_BLINDING_create_param
needed it, and that was persisted as blinding->m_ctx,
although the RSA object creates the Montgomery context
just a bit later.
Then the infamous bn_correct_top was used on the
secret value right after the blinding was removed.
And finally the function BN_bn2binpad did not use
the constant-time code path since the BN_FLG_CONSTTIME
was not set on the secret value.
In order to address the first problem, this patch
makes sure that the rsa->_method_mod_n is initialized
right before the blinding context.
And to fix the second problem, we add a new utility
function bn_correct_top_consttime, a const-time
variant of bn_correct_top.
Together with the fact, that BN_bn2binpad is already
constant time if the flag BN_FLG_CONSTTIME is set,
this should eliminate the timing oracle completely.
In addition the no-asm variant may also have
branches that depend on secret values, because the last
invocation of bn_sub_words in bn_from_montgomery_word
had branches when the function is compiled by certain
gcc compiler versions, due to the clumsy coding style.
So additionally this patch stream-lined the no-asm
C-code in order to avoid branches where possible and
improve the resulting code quality.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20281)
|
|
This reverts commit b1892d21f8f0435deb0250f24a97915dc641c807.
Except for the moving derive_kdk to a separate function.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20281)
|
|
This is an unused internal function. It should be added back
in if there is a need to set this value to something other than
NID_mgf1 (which is not likely).
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20321)
|
|
S390x has to ability to offload modular exponentiation and CRT operations to
Crypto Express Adapters. This possible performance optimization was not yet
used by OpenSSL. Add support for offloading and implement an optimized
version of RSA and DH with it.
The environment variable OPENSSL_s390xcap now recognizes the token "nocex" to
prevent offloading.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20113)
|
|
A timing based side channel exists in the OpenSSL RSA Decryption
implementation which could be sufficient to recover a plaintext across
a network in a Bleichenbacher style attack. To achieve a successful
decryption an attacker would have to be able to send a very large number
of trial messages for decryption. The vulnerability affects all RSA
padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE.
Patch written by Dmitry Belyavsky and Hubert Kario
CVE-2022-4304
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
|
|
This is not a big problem for higher level keygen, as these set e
beforehand to a default value. But the logic at the lower level is
incorrect since it was doing a NULL check in one place but then
segfaulting during a later BN_copy().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20025)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19816)
|
|
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13817)
|
|
The RSA decryption as implemented before required very careful handling
of both the exit code returned by OpenSSL and the potentially returned
ciphertext. Looking at the recent security vulnerabilities
(CVE-2020-25659 and CVE-2020-25657) it is unlikely that most users of
OpenSSL do it correctly.
Given that correct code requires side channel secure programming in
application code, we can classify the existing RSA decryption methods
as CWE-676, which in turn likely causes CWE-208 and CWE-385 in
application code.
To prevent that, we can use a technique called "implicit rejection".
For that we generate a random message to be returned in case the
padding check fails. We generate the message based on static secret
data (the private exponent) and the provided ciphertext (so that the
attacker cannot determine that the returned value is randomly generated
instead of result of decryption and de-padding). We return it in case
any part of padding check fails.
The upshot of this approach is that then not only is the length of the
returned message useless as the Bleichenbacher oracle, so are the
actual bytes of the returned message. So application code doesn't have
to perform any operations on the returned message in side-channel free
way to remain secure against Bleichenbacher attacks.
Note: this patch implements a specific algorithm, shared with Mozilla
NSS, so that the attacker cannot use one library as an oracle against the
other in heterogeneous environments.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13817)
|
|
FIPS 186-4 section 5 "The RSA Digital Signature Algorithm", subsection
5.5 "PKCS #1" says: "For RSASSA-PSS […] the length (in bytes) of the
salt (sLen) shall satisfy 0 <= sLen <= hLen, where hLen is the length of
the hash function output block (in bytes)."
Introduce a new option RSA_PSS_SALTLEN_AUTO_DIGEST_MAX and make it the
default. The new value will behave like RSA_PSS_SALTLEN_AUTO, but will
not use more than the digest length when signing, so that FIPS 186-4 is
not violated. This value has two advantages when compared with
RSA_PSS_SALTLEN_DIGEST: (1) It will continue to do auto-detection when
verifying signatures for maximum compatibility, where
RSA_PSS_SALTLEN_DIGEST would fail for other digest sizes. (2) It will
work for combinations where the maximum salt length is smaller than the
digest size, which typically happens with large digest sizes (e.g.,
SHA-512) and small RSA keys.
J.-S. Coron shows in "Optimal Security Proofs for PSS and Other
Signature Schemes. Advances in Cryptology – Eurocrypt 2002, volume 2332
of Lecture Notes in Computer Science, pp. 272 – 287. Springer Verlag,
2002." that longer salts than the output size of modern hash functions
do not increase security: "For example,for an application in which at
most one billion signatures will be generated, k0 = 30 bits of random
salt are actually sufficient to guarantee the same level of security as
RSA, and taking a larger salt does not increase the security level."
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19724)
|
|
Rather than computing the PSS salt length again in core using
ossl_rsa_ctx_to_pss_string, which calls rsa_ctx_to_pss and computes the
salt length, obtain it from the provider using the
OSSL_SIGNATURE_PARAM_ALGORITHM_ID param to handle the case where the
interpretation of the magic constants in the provider differs from that
of OpenSSL core.
Add tests that verify that the rsa_pss_saltlen:max,
rsa_pss_saltlen:<integer> and rsa_pss_saltlen:digest options work and
put the computed digest length into the CMS_ContentInfo struct when
using CMS. Do not add a test for the salt length generated by a provider
when no specific rsa_pss_saltlen option is defined, since that number
could change between providers and provider versions, and we want to
preserve compatibility with older providers.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19724)
|
|
Fixes openssl#19771
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19787)
|
|
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
|
|
Occurs if a malloc failure happens inside collect_numbers()
Reported via #18365
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18646)
|
|
A -ve return value from this function indicates an error which we should
treat as a failure to validate.
Fixes #18538
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18651)
|
