diff options
Diffstat (limited to 'apps/s_server.c')
| -rw-r--r-- | apps/s_server.c | 154 |
1 files changed, 85 insertions, 69 deletions
diff --git a/apps/s_server.c b/apps/s_server.c index 03ff1b410e..5fa7c2fb42 100644 --- a/apps/s_server.c +++ b/apps/s_server.c @@ -761,26 +761,50 @@ typedef enum OPTION_choice { } OPTION_CHOICE; const OPTIONS s_server_options[] = { + OPT_SECTION("General"), {"help", OPT_HELP, '-', "Display this summary"}, + {"ssl_config", OPT_SSL_CONFIG, 's', + "Configure SSL_CTX using the configuration 'val'"}, +#ifndef OPENSSL_NO_SSL_TRACE + {"trace", OPT_TRACE, '-', "trace protocol messages"}, +#endif +#ifndef OPENSSL_NO_ENGINE + {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"}, +#endif + + OPT_SECTION("Network"), {"port", OPT_PORT, 'p', "TCP/IP port to listen on for connections (default is " PORT ")"}, {"accept", OPT_ACCEPT, 's', "TCP/IP optional host and port to listen on for connections (default is *:" PORT ")"}, #ifdef AF_UNIX {"unix", OPT_UNIX, 's', "Unix domain socket to accept on"}, + {"unlink", OPT_UNLINK, '-', "For -unix, unlink existing socket first"}, #endif {"4", OPT_4, '-', "Use IPv4 only"}, {"6", OPT_6, '-', "Use IPv6 only"}, -#ifdef AF_UNIX - {"unlink", OPT_UNLINK, '-', "For -unix, unlink existing socket first"}, -#endif + + OPT_SECTION("Identity"), {"context", OPT_CONTEXT, 's', "Set session ID context"}, + {"CAfile", OPT_CAFILE, '<', "PEM format file of CA's"}, + {"CApath", OPT_CAPATH, '/', "PEM format directory of CA's"}, + {"CAstore", OPT_CASTORE, ':', "URI to store of CA's"}, + {"no-CAfile", OPT_NOCAFILE, '-', + "Do not load the default certificates file"}, + {"no-CApath", OPT_NOCAPATH, '-', + "Do not load certificates from the default certificates directory"}, + {"no-CAstore", OPT_NOCASTORE, '-', + "Do not load certificates from the default certificates store URI"}, + {"nocert", OPT_NOCERT, '-', "Don't use any certificates (Anon-DH)"}, {"verify", OPT_VERIFY, 'n', "Turn on peer certificate verification"}, {"Verify", OPT_UPPER_V_VERIFY, 'n', "Turn on peer certificate verification, must have a cert"}, {"cert", OPT_CERT, '<', "Certificate file to use; default is " TEST_CERT}, + {"cert2", OPT_CERT2, '<', + "Certificate file to use for servername; default is" TEST_CERT2}, + {"key2", OPT_KEY2, '<', + "-Private Key file to use for servername if not in -cert2"}, {"nameopt", OPT_NAMEOPT, 's', "Various certificate name options"}, - {"naccept", OPT_NACCEPT, 'p', "Terminate after #num connections"}, {"serverinfo", OPT_SERVERINFO, 's', "PEM serverinfo file for certificate"}, {"certform", OPT_CERTFORM, 'F', @@ -800,42 +824,24 @@ const OPTIONS s_server_options[] = { {"dkeyform", OPT_DKEYFORM, 'F', "Second key format (PEM, DER or ENGINE) PEM default"}, {"dpass", OPT_DPASS, 's', "Second private key file pass phrase source"}, + {"servername", OPT_SERVERNAME, 's', + "Servername for HostName TLS extension"}, + {"servername_fatal", OPT_SERVERNAME_FATAL, '-', + "mismatch send fatal alert (default warning alert)"}, + {"nbio_test", OPT_NBIO_TEST, '-', "Test with the non-blocking test bio"}, {"crlf", OPT_CRLF, '-', "Convert LF from terminal into CRLF"}, - {"debug", OPT_DEBUG, '-', "Print more output"}, - {"msg", OPT_MSG, '-', "Show protocol messages"}, - {"msgfile", OPT_MSGFILE, '>', - "File to send output of -msg or -trace, instead of stdout"}, - {"state", OPT_STATE, '-', "Print the SSL states"}, - {"CAfile", OPT_CAFILE, '<', "PEM format file of CA's"}, - {"CApath", OPT_CAPATH, '/', "PEM format directory of CA's"}, - {"CAstore", OPT_CASTORE, ':', "URI to store of CA's"}, - {"no-CAfile", OPT_NOCAFILE, '-', - "Do not load the default certificates file"}, - {"no-CApath", OPT_NOCAPATH, '-', - "Do not load certificates from the default certificates directory"}, - {"no-CAstore", OPT_NOCASTORE, '-', - "Do not load certificates from the default certificates store URI"}, - {"nocert", OPT_NOCERT, '-', "Don't use any certificates (Anon-DH)"}, + {"quiet", OPT_QUIET, '-', "No server output"}, {"no_resume_ephemeral", OPT_NO_RESUME_EPHEMERAL, '-', "Disable caching and tickets if ephemeral (EC)DH is used"}, {"www", OPT_WWW, '-', "Respond to a 'GET /' with a status page"}, {"WWW", OPT_UPPER_WWW, '-', "Respond to a 'GET with the file ./path"}, - {"servername", OPT_SERVERNAME, 's', - "Servername for HostName TLS extension"}, - {"servername_fatal", OPT_SERVERNAME_FATAL, '-', - "mismatch send fatal alert (default warning alert)"}, - {"cert2", OPT_CERT2, '<', - "Certificate file to use for servername; default is" TEST_CERT2}, - {"key2", OPT_KEY2, '<', - "-Private Key file to use for servername if not in -cert2"}, {"tlsextdebug", OPT_TLSEXTDEBUG, '-', "Hex dump of all TLS extensions received"}, {"HTTP", OPT_HTTP, '-', "Like -WWW but ./path includes HTTP headers"}, {"id_prefix", OPT_ID_PREFIX, 's', "Generate SSL/TLS session IDs prefixed by arg"}, - OPT_R_OPTIONS, {"keymatexport", OPT_KEYMATEXPORT, 's', "Export keying material using label"}, {"keymatexportlen", OPT_KEYMATEXPORTLEN, 'p', @@ -843,10 +849,6 @@ const OPTIONS s_server_options[] = { {"CRL", OPT_CRL, '<', "CRL file to use"}, {"crl_download", OPT_CRL_DOWNLOAD, '-', "Download CRL from distribution points"}, - {"cert_chain", OPT_CERT_CHAIN, '<', - "certificate chain file in PEM format"}, - {"dcert_chain", OPT_DCERT_CHAIN, '<', - "second certificate chain file in PEM format"}, {"chainCApath", OPT_CHAINCAPATH, '/', "use dir as certificate store path to build CA certificate chain"}, {"chainCAstore", OPT_CHAINCASTORE, ':', @@ -863,14 +865,13 @@ const OPTIONS s_server_options[] = { "Close connection on verification error"}, {"verify_quiet", OPT_VERIFY_QUIET, '-', "No verify output except verify errors"}, - {"build_chain", OPT_BUILD_CHAIN, '-', "Build certificate chain"}, - {"chainCAfile", OPT_CHAINCAFILE, '<', - "CA file for certificate chain (PEM format)"}, {"verifyCAfile", OPT_VERIFYCAFILE, '<', "CA file for certificate verification (PEM format)"}, {"ign_eof", OPT_IGN_EOF, '-', "ignore input eof (default when -quiet)"}, {"no_ign_eof", OPT_NO_IGN_EOF, '-', "Do not ignore input eof"}, + #ifndef OPENSSL_NO_OCSP + OPT_SECTION("OCSP"), {"status", OPT_STATUS, '-', "Request certificate status from server"}, {"status_verbose", OPT_STATUS_VERBOSE, '-', "Print more output in certificate status callback"}, @@ -880,9 +881,8 @@ const OPTIONS s_server_options[] = { {"status_file", OPT_STATUS_FILE, '<', "File containing DER encoded OCSP Response"}, #endif -#ifndef OPENSSL_NO_SSL_TRACE - {"trace", OPT_TRACE, '-', "trace protocol messages"}, -#endif + + OPT_SECTION("Debug"), {"security_debug", OPT_SECURITY_DEBUG, '-', "Print output from SSL/TLS security framework"}, {"security_debug_verbose", OPT_SECURITY_DEBUG_VERBOSE, '-', @@ -891,20 +891,28 @@ const OPTIONS s_server_options[] = { "Restrict output to brief summary of connection parameters"}, {"rev", OPT_REV, '-', "act as a simple test server which just sends back with the received text reversed"}, + {"debug", OPT_DEBUG, '-', "Print more output"}, + {"msg", OPT_MSG, '-', "Show protocol messages"}, + {"msgfile", OPT_MSGFILE, '>', + "File to send output of -msg or -trace, instead of stdout"}, + {"state", OPT_STATE, '-', "Print the SSL states"}, {"async", OPT_ASYNC, '-', "Operate in asynchronous mode"}, - {"ssl_config", OPT_SSL_CONFIG, 's', - "Configure SSL_CTX using the configuration 'val'"}, - {"max_send_frag", OPT_MAX_SEND_FRAG, 'p', "Maximum Size of send frames "}, - {"split_send_frag", OPT_SPLIT_SEND_FRAG, 'p', - "Size used to split data for encrypt pipelines"}, {"max_pipelines", OPT_MAX_PIPELINES, 'p', "Maximum number of encrypt/decrypt pipelines to be used"}, + {"naccept", OPT_NACCEPT, 'p', "Terminate after #num connections"}, + {"keylogfile", OPT_KEYLOG_FILE, '>', "Write TLS secrets to file"}, + + OPT_SECTION("Network"), + {"nbio", OPT_NBIO, '-', "Use non-blocking IO"}, + {"timeout", OPT_TIMEOUT, '-', "Enable timeouts"}, + {"mtu", OPT_MTU, 'p', "Set link layer MTU"}, {"read_buf", OPT_READ_BUF, 'p', "Default read buffer size to be used for connections"}, - OPT_S_OPTIONS, - OPT_V_OPTIONS, - OPT_X_OPTIONS, - {"nbio", OPT_NBIO, '-', "Use non-blocking IO"}, + {"split_send_frag", OPT_SPLIT_SEND_FRAG, 'p', + "Size used to split data for encrypt pipelines"}, + {"max_send_frag", OPT_MAX_SEND_FRAG, 'p', "Maximum Size of send frames "}, + + OPT_SECTION("Server identity"), {"psk_identity", OPT_PSK_IDENTITY, 's', "PSK identity to expect"}, #ifndef OPENSSL_NO_PSK {"psk_hint", OPT_PSK_HINT, 's', "PSK identity hint to use"}, @@ -916,6 +924,19 @@ const OPTIONS s_server_options[] = { {"srpuserseed", OPT_SRPUSERSEED, 's', "A seed string for a default user salt"}, #endif + + OPT_SECTION("Protocol and version"), + {"max_early_data", OPT_MAX_EARLY, 'n', + "The maximum number of bytes of early data as advertised in tickets"}, + {"recv_max_early_data", OPT_RECV_MAX_EARLY, 'n', + "The maximum number of bytes of early data (hard limit)"}, + {"early_data", OPT_EARLY_DATA, '-', "Attempt to read early data"}, + {"num_tickets", OPT_S_NUM_TICKETS, 'n', + "The number of TLSv1.3 session tickets that a server will automatically issue" }, + {"anti_replay", OPT_ANTI_REPLAY, '-', "Switch on anti-replay protection (default)"}, + {"no_anti_replay", OPT_NO_ANTI_REPLAY, '-', "Switch off anti-replay protection"}, + {"http_server_binmode", OPT_HTTP_SERVER_BINMODE, '-', "opening files in binary mode when acting as http server (-WWW and -HTTP)"}, + {"stateless", OPT_STATELESS, '-', "Require TLSv1.3 cookies"}, #ifndef OPENSSL_NO_SSL3 {"ssl3", OPT_SSL3, '-', "Just talk SSLv3"}, #endif @@ -933,12 +954,9 @@ const OPTIONS s_server_options[] = { #endif #ifndef OPENSSL_NO_DTLS {"dtls", OPT_DTLS, '-', "Use any DTLS version"}, - {"timeout", OPT_TIMEOUT, '-', "Enable timeouts"}, - {"mtu", OPT_MTU, 'p', "Set link layer MTU"}, {"listen", OPT_LISTEN, '-', "Listen for a DTLS ClientHello with a cookie and then connect"}, #endif - {"stateless", OPT_STATELESS, '-', "Require TLSv1.3 cookies"}, #ifndef OPENSSL_NO_DTLS1 {"dtls1", OPT_DTLS1, '-', "Just talk DTLSv1"}, #endif @@ -949,6 +967,10 @@ const OPTIONS s_server_options[] = { {"sctp", OPT_SCTP, '-', "Use SCTP"}, {"sctp_label_bug", OPT_SCTP_LABEL_BUG, '-', "Enable SCTP label length bug"}, #endif +#ifndef OPENSSL_NO_SRTP + {"use_srtp", OPT_SRTP_PROFILES, 's', + "Offer SRTP key management with a colon-separated profile list"}, +#endif #ifndef OPENSSL_NO_DH {"no_dhe", OPT_NO_DHE, '-', "Disable ephemeral DH"}, #endif @@ -956,27 +978,21 @@ const OPTIONS s_server_options[] = { {"nextprotoneg", OPT_NEXTPROTONEG, 's', "Set the advertised protocols for the NPN extension (comma-separated list)"}, #endif -#ifndef OPENSSL_NO_SRTP - {"use_srtp", OPT_SRTP_PROFILES, 's', - "Offer SRTP key management with a colon-separated profile list"}, -#endif {"alpn", OPT_ALPN, 's', "Set the advertised protocols for the ALPN extension (comma-separated list)"}, -#ifndef OPENSSL_NO_ENGINE - {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"}, -#endif - {"keylogfile", OPT_KEYLOG_FILE, '>', "Write TLS secrets to file"}, - {"max_early_data", OPT_MAX_EARLY, 'n', - "The maximum number of bytes of early data as advertised in tickets"}, - {"recv_max_early_data", OPT_RECV_MAX_EARLY, 'n', - "The maximum number of bytes of early data (hard limit)"}, - {"early_data", OPT_EARLY_DATA, '-', "Attempt to read early data"}, - {"num_tickets", OPT_S_NUM_TICKETS, 'n', - "The number of TLSv1.3 session tickets that a server will automatically issue" }, - {"anti_replay", OPT_ANTI_REPLAY, '-', "Switch on anti-replay protection (default)"}, - {"no_anti_replay", OPT_NO_ANTI_REPLAY, '-', "Switch off anti-replay protection"}, - {"http_server_binmode", OPT_HTTP_SERVER_BINMODE, '-', "opening files in binary mode when acting as http server (-WWW and -HTTP)"}, - {NULL, OPT_EOF, 0, NULL} + + OPT_R_OPTIONS, + OPT_S_OPTIONS, + OPT_V_OPTIONS, + {"cert_chain", OPT_CERT_CHAIN, '<', + "certificate chain file in PEM format"}, + {"dcert_chain", OPT_DCERT_CHAIN, '<', + "second certificate chain file in PEM format"}, + {"build_chain", OPT_BUILD_CHAIN, '-', "Build certificate chain"}, + {"chainCAfile", OPT_CHAINCAFILE, '<', + "CA file for certificate chain (PEM format)"}, + OPT_X_OPTIONS, + {NULL} }; #define IS_PROT_FLAG(o) \ |