Add Next Protocol Negotiation.

1 files changed, 101 insertions, 0 deletions

diff --git a/ssl/s3_srvr.c b/ssl/s3_srvr.c
index af9ed3ff5f..4088598d23 100644
--- a/ssl/s3_srvr.c
+++ b/ssl/s3_srvr.c
@@ -598,7 +598,14 @@ int ssl3_accept(SSL *s)
 				 * the client uses its key from the certificate
 				 * for key exchange.
 				 */
+#if defined(OPENSSL_NO_TLSEXT) || defined(OPENSSL_NO_NEXTPROTONEG)
 				s->state=SSL3_ST_SR_FINISHED_A;
+#else
+				if (s->s3->next_proto_neg_seen)
+					s->state=SSL3_ST_SR_NEXT_PROTO_A;
+				else
+					s->state=SSL3_ST_SR_FINISHED_A;
+#endif
 				s->init_num = 0;
 				}
 			else if (TLS1_get_version(s) >= TLS1_2_VERSION)
@@ -659,10 +666,27 @@ int ssl3_accept(SSL *s)
 			ret=ssl3_get_cert_verify(s);
 			if (ret <= 0) goto end;
 
+#if defined(OPENSSL_NO_TLSEXT) || defined(OPENSSL_NO_NEXTPROTONEG)
 			s->state=SSL3_ST_SR_FINISHED_A;
+#else
+			if (s->s3->next_proto_neg_seen)
+				s->state=SSL3_ST_SR_NEXT_PROTO_A;
+			else
+				s->state=SSL3_ST_SR_FINISHED_A;
+#endif
 			s->init_num=0;
 			break;
 
+#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
+		case SSL3_ST_SR_NEXT_PROTO_A:
+		case SSL3_ST_SR_NEXT_PROTO_B:
+			ret=ssl3_get_next_proto(s);
+			if (ret <= 0) goto end;
+			s->init_num = 0;
+			s->state=SSL3_ST_SR_FINISHED_A;
+			break;
+#endif
+
 		case SSL3_ST_SR_FINISHED_A:
 		case SSL3_ST_SR_FINISHED_B:
 			ret=ssl3_get_finished(s,SSL3_ST_SR_FINISHED_A,
@@ -730,7 +754,16 @@ int ssl3_accept(SSL *s)
 			if (ret <= 0) goto end;
 			s->state=SSL3_ST_SW_FLUSH;
 			if (s->hit)
+				{
+#if defined(OPENSSL_NO_TLSEXT) || defined(OPENSSL_NO_NEXTPROTONEG)
 				s->s3->tmp.next_state=SSL3_ST_SR_FINISHED_A;
+#else
+				if (s->s3->next_proto_neg_seen)
+					s->s3->tmp.next_state=SSL3_ST_SR_NEXT_PROTO_A;
+				else
+					s->s3->tmp.next_state=SSL3_ST_SR_FINISHED_A;
+#endif
+				}
 			else
 				s->s3->tmp.next_state=SSL_ST_OK;
 			s->init_num=0;
@@ -3467,4 +3500,72 @@ int ssl3_send_cert_status(SSL *s)
 	/* SSL3_ST_SW_CERT_STATUS_B */
 	return(ssl3_do_write(s,SSL3_RT_HANDSHAKE));
 	}
+
+# ifndef OPENSSL_NO_NEXTPROTONEG
+/* ssl3_get_next_proto reads a Next Protocol Negotiation handshake message. It
+ * sets the next_proto member in s if found */
+int ssl3_get_next_proto(SSL *s)
+	{
+	int ok;
+	int proto_len, padding_len;
+	long n;
+	const unsigned char *p;
+
+	/* Clients cannot send a NextProtocol message if we didn't see the
+	 * extension in their ClientHello */
+	if (!s->s3->next_proto_neg_seen)
+		{
+		SSLerr(SSL_F_SSL3_GET_NEXT_PROTO,SSL_R_GOT_NEXT_PROTO_WITHOUT_EXTENSION);
+		return -1;
+		}
+
+	n=s->method->ssl_get_message(s,
+		SSL3_ST_SR_NEXT_PROTO_A,
+		SSL3_ST_SR_NEXT_PROTO_B,
+		SSL3_MT_NEXT_PROTO,
+		514,  /* See the payload format below */
+		&ok);
+
+	if (!ok)
+		return((int)n);
+
+	/* s->state doesn't reflect whether ChangeCipherSpec has been received
+	 * in this handshake, but s->s3->change_cipher_spec does (will be reset
+	 * by ssl3_get_finished). */
+	if (!s->s3->change_cipher_spec)
+		{
+		SSLerr(SSL_F_SSL3_GET_NEXT_PROTO,SSL_R_GOT_NEXT_PROTO_BEFORE_A_CCS);
+		return -1;
+		}
+
+	if (n < 2)
+		return 0;  /* The body must be > 1 bytes long */
+
+	p=(unsigned char *)s->init_msg;
+
+	/* The payload looks like:
+	 *   uint8 proto_len;
+	 *   uint8 proto[proto_len];
+	 *   uint8 padding_len;
+	 *   uint8 padding[padding_len];
+	 */
+	proto_len = p[0];
+	if (proto_len + 2 > s->init_num)
+		return 0;
+	padding_len = p[proto_len + 1];
+	if (proto_len + padding_len + 2 != s->init_num)
+		return 0;
+
+	s->next_proto_negotiated = OPENSSL_malloc(proto_len);
+	if (!s->next_proto_negotiated)
+		{
+		SSLerr(SSL_F_SSL3_GET_NEXT_PROTO,ERR_R_MALLOC_FAILURE);
+		return 0;
+		}
+	memcpy(s->next_proto_negotiated, p + 1, proto_len);
+	s->next_proto_negotiated_len = proto_len;
+
+	return 1;
+	}
+# endif
 #endif