Update various man pages to place HISTORY section after SEE ALSO

SEE ALSO before HISTORY is the more common pattern in OpenSSL manual
pages and seems to be the prevalent order based on sampling my system
manual pages.

Fixes #8631

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8729)

21 files changed, 129 insertions, 136 deletions

diff --git a/doc/man3/BIO_connect.pod b/doc/man3/BIO_connect.pod
index 00e4463c2e..240b21052c 100644
--- a/doc/man3/BIO_connect.pod
+++ b/doc/man3/BIO_connect.pod
@@ -95,19 +95,19 @@ B<INVALID_SOCKET> (-1) on error.  When an error has occurred, the
 OpenSSL error stack will hold the error data and errno has the system
 error.
 
+=head1 SEE ALSO
+
+L<BIO_ADDR(3)>
+
 =head1 HISTORY
 
 BIO_gethostname(), BIO_get_port(), BIO_get_host_ip(),
 BIO_get_accept_socket() and BIO_accept() were deprecated in
 OpenSSL 1.1.0.  Use the functions described above instead.
 
-=head1 SEE ALSO
-
-L<BIO_ADDR(3)>
-
 =head1 COPYRIGHT
 
-Copyright 2016-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/BN_rand.pod b/doc/man3/BN_rand.pod
index 3ceeff1d31..93e8c3f9d4 100644
--- a/doc/man3/BN_rand.pod
+++ b/doc/man3/BN_rand.pod
@@ -59,6 +59,15 @@ seeded with enough randomness to ensure an unpredictable byte sequence.
 The functions return 1 on success, 0 on error.
 The error codes can be obtained by L<ERR_get_error(3)>.
 
+=head1 SEE ALSO
+
+L<ERR_get_error(3)>,
+L<RAND_add(3)>,
+L<RAND_bytes(3)>,
+L<RAND_priv_bytes(3)>,
+L<RAND(7)>,
+L<RAND_DRBG(7)>
+
 =head1 HISTORY
 
 =over 2
@@ -78,18 +87,9 @@ BN_priv_rand() and BN_priv_rand_range() functions were added in OpenSSL 1.1.1.
 
 =back
 
-=head1 SEE ALSO
-
-L<ERR_get_error(3)>,
-L<RAND_add(3)>,
-L<RAND_bytes(3)>,
-L<RAND_priv_bytes(3)>,
-L<RAND(7)>,
-L<RAND_DRBG(7)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/BN_security_bits.pod b/doc/man3/BN_security_bits.pod
index 3b9bf88724..f02bf2e055 100644
--- a/doc/man3/BN_security_bits.pod
+++ b/doc/man3/BN_security_bits.pod
@@ -31,17 +31,17 @@ Number of security bits.
 ECC (Elliptic Curve Cryptography) is not covered by the BN_security_bits()
 function. The symmetric algorithms are not covered neither.
 
-=head1 HISTORY
-
-The BN_security_bits() function was added in OpenSSL 1.1.0.
-
 =head1 SEE ALSO
 
 L<DH_security_bits(3)>, L<DSA_security_bits(3)>, L<RSA_security_bits(3)>
 
+=head1 HISTORY
+
+The BN_security_bits() function was added in OpenSSL 1.1.0.
+
 =head1 COPYRIGHT
 
-Copyright 2017 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2017-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/DES_random_key.pod b/doc/man3/DES_random_key.pod
index f5203b8499..4f0f25a5a4 100644
--- a/doc/man3/DES_random_key.pod
+++ b/doc/man3/DES_random_key.pod
@@ -296,6 +296,11 @@ last 4 bytes of the checksum of the input.
 DES_fcrypt() returns a pointer to the caller-provided buffer and DES_crypt() -
 to a static buffer on success; otherwise they return NULL.
 
+=head1 SEE ALSO
+
+L<des_modes(7)>,
+L<EVP_EncryptInit(3)>
+
 =head1 HISTORY
 
 The requirement that the B<salt> parameter to DES_crypt() and DES_fcrypt()
@@ -304,14 +309,9 @@ OpenSSL 1.1.0.  Previous versions tried to use the letter uppercase B<A>
 if both character were not present, and could crash when given non-ASCII
 on some platforms.
 
-=head1 SEE ALSO
-
-L<des_modes(7)>,
-L<EVP_EncryptInit(3)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/PEM_read_bio_PrivateKey.pod b/doc/man3/PEM_read_bio_PrivateKey.pod
index a5a63c48b8..69ff679b2d 100644
--- a/doc/man3/PEM_read_bio_PrivateKey.pod
+++ b/doc/man3/PEM_read_bio_PrivateKey.pod
@@ -459,20 +459,20 @@ Skeleton pass phrase callback:
      return len;
  }
 
+=head1 SEE ALSO
+
+L<EVP_EncryptInit(3)>, L<EVP_BytesToKey(3)>,
+L<passphrase-encoding(7)>
+
 =head1 HISTORY
 
 The old Netscape certificate sequences were no longer documented
 in OpenSSL 1.1.0; applications should use the PKCS7 standard instead
 as they will be formally deprecated in a future releases.
 
-=head1 SEE ALSO
-
-L<EVP_EncryptInit(3)>, L<EVP_BytesToKey(3)>,
-L<passphrase-encoding(7)>
-
 =head1 COPYRIGHT
 
-Copyright 2001-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2001-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/RAND_DRBG_generate.pod b/doc/man3/RAND_DRBG_generate.pod
index 09903f8ca9..e0778ea224 100644
--- a/doc/man3/RAND_DRBG_generate.pod
+++ b/doc/man3/RAND_DRBG_generate.pod
@@ -65,12 +65,6 @@ entropy from a live entropy source (section 5.5.2 of [NIST SP 800-90C]).
 It is up to the user to ensure that a live entropy source is configured
 and is being used.
 
-=head1 HISTORY
-
-The RAND_DRBG functions were added in OpenSSL 1.1.1.
-
-Prediction resistance is supported from OpenSSL 3.0.0.
-
 =head1 SEE ALSO
 
 L<RAND_bytes(3)>,
@@ -78,9 +72,15 @@ L<RAND_DRBG_set_reseed_interval(3)>,
 L<RAND_DRBG_set_reseed_time_interval(3)>,
 L<RAND_DRBG(7)>
 
+=head1 HISTORY
+
+The RAND_DRBG functions were added in OpenSSL 1.1.1.
+
+Prediction resistance is supported from OpenSSL 3.0.0.
+
 =head1 COPYRIGHT
 
-Copyright 2017-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2017-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/RAND_DRBG_get0_master.pod b/doc/man3/RAND_DRBG_get0_master.pod
index e829887392..62f6fdbdd0 100644
--- a/doc/man3/RAND_DRBG_get0_master.pod
+++ b/doc/man3/RAND_DRBG_get0_master.pod
@@ -53,11 +53,6 @@ During initialization, it is possible to change the reseed interval
 and reseed time interval.
 It is also possible to exchange the reseeding callbacks entirely.
 
-
-=head1 HISTORY
-
-The RAND_DRBG functions were added in OpenSSL 1.1.1.
-
 =head1 SEE ALSO
 
 L<RAND_DRBG_set_callbacks(3)>,
@@ -68,9 +63,13 @@ L<RAND_DRBG_set_callbacks(3)>,
 L<RAND_DRBG_generate(3)>,
 L<RAND_DRBG(7)>
 
+=head1 HISTORY
+
+The RAND_DRBG functions were added in OpenSSL 1.1.1.
+
 =head1 COPYRIGHT
 
-Copyright 2017-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2017-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/RAND_DRBG_new.pod b/doc/man3/RAND_DRBG_new.pod
index 27142abf19..8b73840697 100644
--- a/doc/man3/RAND_DRBG_new.pod
+++ b/doc/man3/RAND_DRBG_new.pod
@@ -134,10 +134,6 @@ To ensure that they are applied to the global and thread-local DRBG instances
 RAND_DRBG_set_defaults() before creating any thread and before calling any
 cryptographic routines that obtain random data directly or indirectly.
 
-=head1 HISTORY
-
-The RAND_DRBG functions were added in OpenSSL 1.1.1.
-
 =head1 SEE ALSO
 
 L<OPENSSL_zalloc(3)>,
@@ -145,9 +141,13 @@ L<OPENSSL_secure_zalloc(3)>,
 L<RAND_DRBG_generate(3)>,
 L<RAND_DRBG(7)>
 
+=head1 HISTORY
+
+The RAND_DRBG functions were added in OpenSSL 1.1.1.
+
 =head1 COPYRIGHT
 
-Copyright 2017-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2017-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/RAND_DRBG_reseed.pod b/doc/man3/RAND_DRBG_reseed.pod
index c4d2671ba5..40375603f7 100644
--- a/doc/man3/RAND_DRBG_reseed.pod
+++ b/doc/man3/RAND_DRBG_reseed.pod
@@ -93,17 +93,6 @@ To ensure that they are applied to the global and thread-local DRBG instances
 RAND_DRBG_set_reseed_defaults() before creating any thread and before calling any
  cryptographic routines that obtain random data directly or indirectly.
 
-A request for prediction resistance can only be satisfied by pulling fresh
-entropy from a live entropy source (section 5.5.2 of [NIST SP 800-90C]).
-It is up to the user to ensure that a live entropy source is configured
-and is being used.
-
-=head1 HISTORY
-
-The RAND_DRBG functions were added in OpenSSL 1.1.1.
-
-Prediction resistance is supported from OpenSSL 3.0.0.
-
 =head1 SEE ALSO
 
 L<RAND_DRBG_generate(3)>,
@@ -111,9 +100,15 @@ L<RAND_DRBG_bytes(3)>,
 L<RAND_DRBG_set_callbacks(3)>.
 L<RAND_DRBG(7)>
 
+=head1 HISTORY
+
+The RAND_DRBG functions were added in OpenSSL 1.1.1.
+
+Prediction resistance is supported from OpenSSL 3.0.0.
+
 =head1 COPYRIGHT
 
-Copyright 2017-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2017-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/RAND_DRBG_set_callbacks.pod b/doc/man3/RAND_DRBG_set_callbacks.pod
index 4734b07295..09a6ef1f7e 100644
--- a/doc/man3/RAND_DRBG_set_callbacks.pod
+++ b/doc/man3/RAND_DRBG_set_callbacks.pod
@@ -121,20 +121,19 @@ In this case the DRBG will automatically request an extra amount of entropy
 utilize for the nonce, following the recommendations of [NIST SP 800-90A Rev. 1],
 section 8.6.7.
 
-
-=head1 HISTORY
-
-The RAND_DRBG functions were added in OpenSSL 1.1.1.
-
 =head1 SEE ALSO
 
 L<RAND_DRBG_new(3)>,
 L<RAND_DRBG_reseed(3)>,
 L<RAND_DRBG(7)>
 
+=head1 HISTORY
+
+The RAND_DRBG functions were added in OpenSSL 1.1.1.
+
 =head1 COPYRIGHT
 
-Copyright 2017-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2017-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/RAND_add.pod b/doc/man3/RAND_add.pod
index 65232d979d..ed7824db7f 100644
--- a/doc/man3/RAND_add.pod
+++ b/doc/man3/RAND_add.pod
@@ -80,11 +80,6 @@ RAND_event() returns RAND_status().
 
 The other functions do not return values.
 
-=head1 HISTORY
-
-RAND_event() and RAND_screen() were deprecated in OpenSSL 1.1.0 and should
-not be used.
-
 =head1 SEE ALSO
 
 L<RAND_bytes(3)>,
@@ -92,9 +87,14 @@ L<RAND_egd(3)>,
 L<RAND_load_file(3)>,
 L<RAND(7)>
 
+=head1 HISTORY
+
+RAND_event() and RAND_screen() were deprecated in OpenSSL 1.1.0 and should
+not be used.
+
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/RAND_bytes.pod b/doc/man3/RAND_bytes.pod
index 86d37b3f84..fb1e1c9a22 100644
--- a/doc/man3/RAND_bytes.pod
+++ b/doc/man3/RAND_bytes.pod
@@ -43,6 +43,15 @@ return 1 on success, -1 if not supported by the current
 RAND method, or 0 on other failure. The error code can be
 obtained by L<ERR_get_error(3)>.
 
+=head1 SEE ALSO
+
+L<RAND_add(3)>,
+L<RAND_bytes(3)>,
+L<RAND_priv_bytes(3)>,
+L<ERR_get_error(3)>,
+L<RAND(7)>,
+L<RAND_DRBG(7)>
+
 =head1 HISTORY
 
 =over 2
@@ -57,18 +66,9 @@ The RAND_priv_bytes() function was added in OpenSSL 1.1.1.
 
 =back
 
-=head1 SEE ALSO
-
-L<RAND_add(3)>,
-L<RAND_bytes(3)>,
-L<RAND_priv_bytes(3)>,
-L<ERR_get_error(3)>,
-L<RAND(7)>,
-L<RAND_DRBG(7)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/RAND_cleanup.pod b/doc/man3/RAND_cleanup.pod
index 129d579364..dfe76a7b70 100644
--- a/doc/man3/RAND_cleanup.pod
+++ b/doc/man3/RAND_cleanup.pod
@@ -25,18 +25,18 @@ L<OPENSSL_init_crypto(3)>.
 
 RAND_cleanup() returns no value.
 
+=head1 SEE ALSO
+
+L<RAND(7)>
+
 =head1 HISTORY
 
 RAND_cleanup() was deprecated in OpenSSL 1.1.0; do not use it.
 See L<OPENSSL_init_crypto(3)>
 
-=head1 SEE ALSO
-
-L<RAND(7)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/SSL_CIPHER_get_name.pod b/doc/man3/SSL_CIPHER_get_name.pod
index 1da3447b44..26ee6a0fa1 100644
--- a/doc/man3/SSL_CIPHER_get_name.pod
+++ b/doc/man3/SSL_CIPHER_get_name.pod
@@ -180,6 +180,11 @@ SSL_CIPHER_get_id() returns a 4-byte integer representing the OpenSSL-specific I
 SSL_CIPHER_get_protocol_id() returns a 2-byte integer representing the TLS
 protocol-specific ID.
 
+=head1 SEE ALSO
+
+L<ssl(7)>, L<SSL_get_current_cipher(3)>,
+L<SSL_get_ciphers(3)>, L<ciphers(1)>
+
 =head1 HISTORY
 
 The SSL_CIPHER_get_version() function was updated to always return the
@@ -196,14 +201,9 @@ required to enable this function.
 
 The OPENSSL_cipher_name() function was added in OpenSSL 1.1.1.
 
-=head1 SEE ALSO
-
-L<ssl(7)>, L<SSL_get_current_cipher(3)>,
-L<SSL_get_ciphers(3)>, L<ciphers(1)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/SSL_CTX_new.pod b/doc/man3/SSL_CTX_new.pod
index 371827d87b..f1dffadc6e 100644
--- a/doc/man3/SSL_CTX_new.pod
+++ b/doc/man3/SSL_CTX_new.pod
@@ -190,6 +190,11 @@ SSL_CTX_up_ref() returns 1 for success and 0 for failure.
 
 =back
 
+=head1 SEE ALSO
+
+L<SSL_CTX_set_options(3)>, L<SSL_CTX_free(3)>, L<SSL_accept(3)>,
+L<SSL_CTX_set_min_proto_version(3)>, L<ssl(7)>, L<SSL_set_connect_state(3)>
+
 =head1 HISTORY
 
 Support for SSLv2 and the corresponding SSLv2_method(),
@@ -202,14 +207,9 @@ and TLS_client_method() functions were introduced in OpenSSL 1.1.0.
 
 All version-specific methods were deprecated in OpenSSL 1.1.0.
 
-=head1 SEE ALSO
-
-L<SSL_CTX_set_options(3)>, L<SSL_CTX_free(3)>, L<SSL_accept(3)>,
-L<SSL_CTX_set_min_proto_version(3)>, L<ssl(7)>, L<SSL_set_connect_state(3)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/SSL_CTX_set_default_passwd_cb.pod b/doc/man3/SSL_CTX_set_default_passwd_cb.pod
index 4d381648b0..bc19890c6d 100644
--- a/doc/man3/SSL_CTX_set_default_passwd_cb.pod
+++ b/doc/man3/SSL_CTX_set_default_passwd_cb.pod
@@ -90,20 +90,20 @@ truncated.
      return strlen(buf);
  }
 
+=head1 SEE ALSO
+
+L<ssl(7)>,
+L<SSL_CTX_use_certificate(3)>
+
 =head1 HISTORY
 
 SSL_CTX_get_default_passwd_cb(), SSL_CTX_get_default_passwd_cb_userdata(),
 SSL_set_default_passwd_cb() and SSL_set_default_passwd_cb_userdata() were
 added in OpenSSL 1.1.0.
 
-=head1 SEE ALSO
-
-L<ssl(7)>,
-L<SSL_CTX_use_certificate(3)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2016 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/SSL_CTX_set_min_proto_version.pod b/doc/man3/SSL_CTX_set_min_proto_version.pod
index 32a47cf65f..45f82107a7 100644
--- a/doc/man3/SSL_CTX_set_min_proto_version.pod
+++ b/doc/man3/SSL_CTX_set_min_proto_version.pod
@@ -52,18 +52,18 @@ lowest or highest protocol, respectively.
 
 All these functions are implemented using macros.
 
+=head1 SEE ALSO
+
+L<SSL_CTX_set_options(3)>, L<SSL_CONF_cmd(3)>
+
 =head1 HISTORY
 
 The setter functions were added in OpenSSL 1.1.0. The getter functions
 were added in OpenSSL 1.1.1.
 
-=head1 SEE ALSO
-
-L<SSL_CTX_set_options(3)>, L<SSL_CONF_cmd(3)>
-
 =head1 COPYRIGHT
 
-Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/SSL_CTX_set_split_send_fragment.pod b/doc/man3/SSL_CTX_set_split_send_fragment.pod
index cf595eef76..5f0ff3f748 100644
--- a/doc/man3/SSL_CTX_set_split_send_fragment.pod
+++ b/doc/man3/SSL_CTX_set_split_send_fragment.pod
@@ -162,6 +162,10 @@ SSL_set_default_read_buffer_len(), SSL_CTX_set_tlsext_max_fragment_length(),
 SSL_set_tlsext_max_fragment_length() and SSL_SESSION_get_max_fragment_length()
 all these functions are implemented using macros.
 
+=head1 SEE ALSO
+
+L<SSL_CTX_set_read_ahead(3)>, L<SSL_pending(3)>
+
 =head1 HISTORY
 
 The SSL_CTX_set_max_pipelines(), SSL_set_max_pipelines(),
@@ -172,13 +176,9 @@ functions were added in OpenSSL 1.1.0.
 The SSL_CTX_set_tlsext_max_fragment_length(), SSL_set_tlsext_max_fragment_length()
 and SSL_SESSION_get_max_fragment_length() functions were added in OpenSSL 1.1.1.
 
-=head1 SEE ALSO
-
-L<SSL_CTX_set_read_ahead(3)>, L<SSL_pending(3)>
-
 =head1 COPYRIGHT
 
-Copyright 2016-2017 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/SSL_read.pod b/doc/man3/SSL_read.pod
index c60bd230f6..f5c02a35ad 100644
--- a/doc/man3/SSL_read.pod
+++ b/doc/man3/SSL_read.pod
@@ -126,10 +126,6 @@ You should instead call SSL_get_error() to find out if it's retryable.
 
 =back
 
-=head1 HISTORY
-
-The SSL_read_ex() and SSL_peek_ex() functions were added in OpenSSL 1.1.1.
-
 =head1 SEE ALSO
 
 L<SSL_get_error(3)>, L<SSL_write_ex(3)>,
@@ -140,9 +136,13 @@ L<SSL_pending(3)>,
 L<SSL_shutdown(3)>, L<SSL_set_shutdown(3)>,
 L<ssl(7)>, L<bio(7)>
 
+=head1 HISTORY
+
+The SSL_read_ex() and SSL_peek_ex() functions were added in OpenSSL 1.1.1.
+
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/SSL_write.pod b/doc/man3/SSL_write.pod
index 4daaec2d31..a73bc062ce 100644
--- a/doc/man3/SSL_write.pod
+++ b/doc/man3/SSL_write.pod
@@ -104,10 +104,6 @@ You should instead call SSL_get_error() to find out if it's retryable.
 
 =back
 
-=head1 HISTORY
-
-The SSL_write_ex() function was added in OpenSSL 1.1.1.
-
 =head1 SEE ALSO
 
 L<SSL_get_error(3)>, L<SSL_read_ex(3)>, L<SSL_read(3)>
@@ -116,9 +112,13 @@ L<SSL_connect(3)>, L<SSL_accept(3)>
 L<SSL_set_connect_state(3)>,
 L<ssl(7)>, L<bio(7)>
 
+=head1 HISTORY
+
+The SSL_write_ex() function was added in OpenSSL 1.1.1.
+
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy
diff --git a/doc/man3/X509_get_subject_name.pod b/doc/man3/X509_get_subject_name.pod
index 21bb40301d..8c9d854b9a 100644
--- a/doc/man3/X509_get_subject_name.pod
+++ b/doc/man3/X509_get_subject_name.pod
@@ -48,14 +48,6 @@ and X509_CRL_get_issuer() return an B<X509_NAME> pointer.
 X509_set_subject_name(), X509_set_issuer_name(), X509_REQ_set_subject_name()
 and X509_CRL_set_issuer_name() return 1 for success and 0 for failure.
 
-=head1 HISTORY
-
-X509_REQ_get_subject_name() is a function in OpenSSL 1.1.0 and a macro in
-earlier versions.
-
-X509_CRL_get_issuer() is a function in OpenSSL 1.1.0. It was previously
-added in OpenSSL 1.0.0 as a macro.
-
 =head1 SEE ALSO
 
 L<d2i_X509(3)>,
@@ -74,9 +66,17 @@ L<X509_sign(3)>,
 L<X509V3_get_d2i(3)>,
 L<X509_verify_cert(3)>
 
+=head1 HISTORY
+
+X509_REQ_get_subject_name() is a function in OpenSSL 1.1.0 and a macro in
+earlier versions.
+
+X509_CRL_get_issuer() is a function in OpenSSL 1.1.0. It was previously
+added in OpenSSL 1.0.0 as a macro.
+
 =head1 COPYRIGHT
 
-Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2015-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy