Adding linux 3.4.

svn path=/nixpkgs/trunk/; revision=34209

2 files changed, 266 insertions, 0 deletions

diff --git a/pkgs/os-specific/linux/kernel/linux-3.4.nix b/pkgs/os-specific/linux/kernel/linux-3.4.nix
new file mode 100644
index 000000000000..18633ec7d344
--- /dev/null
+++ b/pkgs/os-specific/linux/kernel/linux-3.4.nix
@@ -0,0 +1,257 @@
+args @ { stdenv, fetchurl, userModeLinux ? false, extraConfig ? ""
+, perl, mktemp, module_init_tools
+, ... }:
+
+let
+  configWithPlatform = kernelPlatform :
+    ''
+      # powermanagement and debugging for powertop
+      DEBUG_KERNEL y
+      PM_ADVANCED_DEBUG y
+      PM_RUNTIME y
+      TIMER_STATS y
+      USB_SUSPEND y
+      BACKTRACE_SELF_TEST n
+      CPU_NOTIFIER_ERROR_INJECT? n
+      DEBUG_DEVRES n
+      DEBUG_NX_TEST n
+      DEBUG_STACK_USAGE n
+      DEBUG_STACKOVERFLOW n
+      RCU_TORTURE_TEST n
+      SCHEDSTATS n
+
+      # Support drivers that need external firmware.
+      STANDALONE n
+
+      # Make /proc/config.gz available.
+      IKCONFIG_PROC y
+
+      # Optimize with -O2, not -Os.
+      CC_OPTIMIZE_FOR_SIZE n
+
+      # Enable the kernel's built-in memory tester.
+      MEMTEST y
+
+      # Include the CFQ I/O scheduler in the kernel, rather than as a
+      # module, so that the initrd gets a good I/O scheduler.
+      IOSCHED_CFQ y
+      BLK_CGROUP y # required by CFQ
+
+      # Enable NUMA.
+      NUMA? y
+
+      # Disable some expensive (?) features.
+      FTRACE n
+      KPROBES n
+      PM_TRACE_RTC n
+
+      # Enable various subsystems.
+      ACCESSIBILITY y # Accessibility support
+      AUXDISPLAY y # Auxiliary Display support
+      DONGLE y # Serial dongle support
+      HIPPI? y
+      MTD_COMPLEX_MAPPINGS y # needed for many devices
+      SCSI_LOWLEVEL y # enable lots of SCSI devices
+      SCSI_LOWLEVEL_PCMCIA y
+      SPI y # needed for many devices
+      SPI_MASTER y
+      WAN y
+
+      # Networking options.
+      IP_PNP n
+      IPV6_PRIVACY y
+      NETFILTER_ADVANCED y
+      IP_VS_PROTO_TCP y
+      IP_VS_PROTO_UDP y
+      IP_VS_PROTO_ESP y
+      IP_VS_PROTO_AH y
+      IP_DCCP_CCID3 n # experimental
+      CLS_U32_PERF y
+      CLS_U32_MARK y
+
+      # Wireless networking.
+      IPW2100_MONITOR y # support promiscuous mode
+      IPW2200_MONITOR y # support promiscuous mode
+      HOSTAP_FIRMWARE y # Support downloading firmware images with Host AP driver
+      HOSTAP_FIRMWARE_NVRAM y
+      ATH9K_PCI y # Detect Atheros AR9xxx cards on PCI(e) bus
+      ATH9K_AHB y # Ditto, AHB bus
+
+      # Some settings to make sure that fbcondecor works - in particular,
+      # disable tileblitting and the drivers that need it.
+
+      # Enable various FB devices.
+      FB y
+      FB_EFI y
+      FB_NVIDIA_I2C y # Enable DDC Support
+      FB_RIVA_I2C y
+      FB_ATY_CT y # Mach64 CT/VT/GT/LT (incl. 3D RAGE) support
+      FB_ATY_GX y # Mach64 GX support
+      FB_SAVAGE_I2C y
+      FB_SAVAGE_ACCEL y
+      FB_SIS_300 y
+      FB_SIS_315 y
+      FB_3DFX_ACCEL y
+      FB_GEODE y
+
+      # Video configuration
+      # Enable KMS for devices whose X.org driver supports it.
+      DRM_I915_KMS y
+      DRM_RADEON_KMS y
+      # Hybrid graphics support
+      VGA_SWITCHEROO y
+
+      # Sound.
+      SND_AC97_POWER_SAVE y # AC97 Power-Saving Mode
+      SND_HDA_INPUT_BEEP y # Support digital beep via input layer
+      SND_USB_CAIAQ_INPUT y
+      PSS_MIXER y # Enable PSS mixer (Beethoven ADSP-16 and other compatible)
+
+      # USB serial devices.
+      USB_SERIAL_GENERIC y # USB Generic Serial Driver
+      USB_SERIAL_KEYSPAN_MPR y # include firmware for various USB serial devices
+      USB_SERIAL_KEYSPAN_USA28 y
+      USB_SERIAL_KEYSPAN_USA28X y
+      USB_SERIAL_KEYSPAN_USA28XA y
+      USB_SERIAL_KEYSPAN_USA28XB y
+      USB_SERIAL_KEYSPAN_USA19 y
+      USB_SERIAL_KEYSPAN_USA18X y
+      USB_SERIAL_KEYSPAN_USA19W y
+      USB_SERIAL_KEYSPAN_USA19QW y
+      USB_SERIAL_KEYSPAN_USA19QI y
+      USB_SERIAL_KEYSPAN_USA49W y
+      USB_SERIAL_KEYSPAN_USA49WLC y
+
+      # Filesystem options - in particular, enable extended attributes and
+      # ACLs for all filesystems that support them.
+      EXT2_FS_XATTR y # Ext2 extended attributes
+      EXT2_FS_POSIX_ACL y # Ext2 POSIX Access Control Lists
+      EXT2_FS_SECURITY y # Ext2 Security Labels
+      EXT2_FS_XIP y # Ext2 execute in place support
+      EXT4_FS_POSIX_ACL y
+      EXT4_FS_SECURITY y
+      REISERFS_FS_XATTR y
+      REISERFS_FS_POSIX_ACL y
+      REISERFS_FS_SECURITY y
+      JFS_POSIX_ACL y
+      JFS_SECURITY y
+      XFS_QUOTA y
+      XFS_POSIX_ACL y
+      XFS_RT y # XFS Realtime subvolume support
+      OCFS2_DEBUG_MASKLOG n
+      BTRFS_FS_POSIX_ACL y
+      UBIFS_FS_XATTR y
+      UBIFS_FS_ADVANCED_COMPR y
+      NFSD_V2_ACL y
+      NFSD_V3 y
+      NFSD_V3_ACL y
+      NFSD_V4 y
+      CIFS_XATTR y
+      CIFS_POSIX y
+
+      # Security related features.
+      STRICT_DEVMEM y # Filter access to /dev/mem
+      SECURITY_SELINUX_BOOTPARAM_VALUE 0 # disable SELinux by default
+
+      # Misc. options.
+      8139TOO_8129 y
+      8139TOO_PIO n # PIO is slower
+      AIC79XX_DEBUG_ENABLE n
+      AIC7XXX_DEBUG_ENABLE n
+      AIC94XX_DEBUG n
+      B43_PCMCIA y
+      BLK_DEV_CMD640_ENHANCED y # CMD640 enhanced support
+      BLK_DEV_IDEACPI y # IDE ACPI support
+      BLK_DEV_INTEGRITY y
+      BSD_PROCESS_ACCT_V3 y
+      BT_HCIUART_BCSP y
+      BT_HCIUART_H4 y # UART (H4) protocol support
+      BT_HCIUART_LL y
+      BT_RFCOMM m
+      BT_RFCOMM_TTY y # RFCOMM TTY support
+      CRASH_DUMP n
+      DMAR? n # experimental
+      DVB_DYNAMIC_MINORS y # we use udev
+      EFI_STUB y # EFI bootloader in the bzImage itself
+      FUSION y # Fusion MPT device support
+      IDE_GD_ATAPI y # ATAPI floppy support
+      IRDA_ULTRA y # Ultra (connectionless) protocol
+      JOYSTICK_IFORCE_232 y # I-Force Serial joysticks and wheels
+      JOYSTICK_IFORCE_USB y # I-Force USB joysticks and wheels
+      JOYSTICK_XPAD_FF y # X-Box gamepad rumble support
+      JOYSTICK_XPAD_LEDS y # LED Support for Xbox360 controller 'BigX' LED
+      LDM_PARTITION y # Windows Logical Disk Manager (Dynamic Disk) support
+      LEDS_TRIGGER_IDE_DISK y # LED IDE Disk Trigger
+      LOGIRUMBLEPAD2_FF y # Logitech Rumblepad 2 force feedback
+      LOGO n # not needed
+      MEDIA_ATTACH y
+      MEGARAID_NEWGEN y
+      MICROCODE_AMD y
+      MODVERSIONS y
+      MOUSE_PS2_ELANTECH y # Elantech PS/2 protocol extension
+      MTRR_SANITIZER y
+      NET_FC y # Fibre Channel driver support
+      PPP_MULTILINK y # PPP multilink support
+      REGULATOR y # Voltage and Current Regulator Support
+      SCSI_LOGGING y # SCSI logging facility
+      SERIAL_8250 y # 8250/16550 and compatible serial support
+      SLIP_COMPRESSED y # CSLIP compressed headers
+      SLIP_SMART y
+      THERMAL_HWMON y # Hardware monitoring support
+      USB_DEBUG n
+      USB_EHCI_ROOT_HUB_TT y # Root Hub Transaction Translators
+      X86_CHECK_BIOS_CORRUPTION y
+      X86_MCE y
+
+      # Linux Containers
+      RT_GROUP_SCHED? y
+      CGROUP_DEVICE? y
+      CGROUP_MEM_RES_CTLR? y
+      CGROUP_MEM_RES_CTLR_SWAP? y
+      DEVPTS_MULTIPLE_INSTANCES? y
+
+      # Enable staging drivers.  These are somewhat experimental, but
+      # they generally don't hurt.
+      STAGING y
+
+      # PROC_EVENTS requires that the netlink connector is not built
+      # as a module.  This is required by libcgroup's cgrulesengd.
+      CONNECTOR y
+      PROC_EVENTS y
+
+      # Tracing
+      FTRACE y
+      FUNCTION_TRACER y
+      FTRACE_SYSCALLS y
+      SCHED_TRACER y
+
+      ${if kernelPlatform ? kernelExtraConfig then kernelPlatform.kernelExtraConfig else ""}
+      ${extraConfig}
+    '';
+in
+
+import ./generic.nix (
+
+  rec {
+    version = "3.4";
+    modDirVersion = "3.4.0";
+    testing = false;
+
+    preConfigure = ''
+      substituteInPlace scripts/depmod.sh --replace '-b "$INSTALL_MOD_PATH"' ""
+    '';
+
+    src = fetchurl {
+      url = "mirror://kernel/linux/kernel/v3.x/${if testing then "testing/" else ""}linux-${version}.tar.xz";
+      sha256 = "ff3dee6a855873d12487a6f4070ec2f7996d073019171361c955639664baa0c6";
+    };
+
+    config = configWithPlatform stdenv.platform;
+    configCross = configWithPlatform stdenv.cross.platform;
+
+    features.iwlwifi = true;
+    features.efiBootStub = true;
+  }
+
+  // removeAttrs args ["extraConfig"]
+)
diff --git a/pkgs/top-level/all-packages.nix b/pkgs/top-level/all-packages.nix
index 52c63885f7c6..25eeacd14a08 100644
--- a/pkgs/top-level/all-packages.nix
+++ b/pkgs/top-level/all-packages.nix
@@ -5650,6 +5650,14 @@ let
       ];
   };
 
+  linux_3_4 = makeOverridable (import ../os-specific/linux/kernel/linux-3.4.nix) {
+    inherit fetchurl stdenv perl mktemp module_init_tools ubootChooser;
+    kernelPatches =
+      [ #kernelPatches.fbcondecor_2_6_38
+        kernelPatches.sec_perm_2_6_24
+      ];
+  };
+
   /* Linux kernel modules are inherently tied to a specific kernel.  So
      rather than provide specific instances of those packages for a
      specific kernel, we have a function that builds those packages
@@ -5776,6 +5784,7 @@ let
   linuxPackages_nanonote_jz_2_6_36 = linuxPackagesFor linux_nanonote_jz_2_6_36 pkgs.linuxPackages_nanonote_jz_2_6_36;
   linuxPackages_3_2 = recurseIntoAttrs (linuxPackagesFor pkgs.linux_3_2 pkgs.linuxPackages_3_2);
   linuxPackages_3_3 = recurseIntoAttrs (linuxPackagesFor pkgs.linux_3_3 pkgs.linuxPackages_3_3);
+  linuxPackages_3_4 = recurseIntoAttrs (linuxPackagesFor pkgs.linux_3_4 pkgs.linuxPackages_3_4);
 
   # The current default kernel / kernel modules.
   linux = linuxPackages.kernel;