diff options
author | Janne Heß <janne@hess.ooo> | 2022-03-13 17:50:36 +0100 |
---|---|---|
committer | GitHub <noreply@github.com> | 2022-03-13 17:50:36 +0100 |
commit | 3148b3d3653902486d93740c93d3f4320c883c73 (patch) | |
tree | 66576eb2e5bd3c3e10151b5fb1703f958e9125a4 /nixos/modules | |
parent | d0e0d14a1953d7eeadb05c15d0e010583b41f3be (diff) | |
parent | 461c1c9e86ccccd2d6c18c3ef9117ddab550e068 (diff) |
Merge pull request #163069 from helsinki-systems/feat/minor-stc-improvements
nixos/switch-to-configuration: Few minor/medium improvements
Diffstat (limited to 'nixos/modules')
-rw-r--r-- | nixos/modules/system/activation/switch-to-configuration.pl | 259 |
1 files changed, 168 insertions, 91 deletions
diff --git a/nixos/modules/system/activation/switch-to-configuration.pl b/nixos/modules/system/activation/switch-to-configuration.pl index a1653d451fea..07ee281feec1 100644 --- a/nixos/modules/system/activation/switch-to-configuration.pl +++ b/nixos/modules/system/activation/switch-to-configuration.pl @@ -10,6 +10,8 @@ use Net::DBus; use Sys::Syslog qw(:standard :macros); use Cwd 'abs_path'; +## no critic(CodeLayout::ProhibitParensWithBuiltins) + my $out = "@out@"; my $curSystemd = abs_path("/run/current-system/sw/bin"); @@ -36,13 +38,13 @@ my $dryReloadByActivationFile = "/run/nixos/dry-activation-reload-list"; make_path("/run/nixos", { mode => oct(755) }); -my $action = shift @ARGV; +my $action = shift(@ARGV); if ("@localeArchive@" ne "") { $ENV{LOCALE_ARCHIVE} = "@localeArchive@"; } -if (!defined $action || ($action ne "switch" && $action ne "boot" && $action ne "test" && $action ne "dry-activate")) { +if (!defined($action) || ($action ne "switch" && $action ne "boot" && $action ne "test" && $action ne "dry-activate")) { print STDERR <<EOF; Usage: $0 [switch|boot|test] @@ -51,27 +53,27 @@ boot: make the configuration the boot default test: activate the configuration, but don\'t make it the boot default dry-activate: show what would be done if this configuration were activated EOF - exit 1; + exit(1); } $ENV{NIXOS_ACTION} = $action; # This is a NixOS installation if it has /etc/NIXOS or a proper # /etc/os-release. -die "This is not a NixOS installation!\n" unless +die("This is not a NixOS installation!\n") unless -f "/etc/NIXOS" || (read_file("/etc/os-release", err_mode => 'quiet') // "") =~ /ID="?nixos"?/s; openlog("nixos", "", LOG_USER); # Install or update the bootloader. if ($action eq "switch" || $action eq "boot") { - system("@installBootLoader@ $out") == 0 or exit 1; + system('@installBootLoader@', $out) == 0 or exit 1; } # Just in case the new configuration hangs the system, do a sync now. system("@coreutils@/bin/sync", "-f", "/nix/store") unless ($ENV{"NIXOS_NO_SYNC"} // "") eq "1"; -exit 0 if $action eq "boot"; +exit(0) if $action eq "boot"; # Check if we can activate the new configuration. my $oldVersion = read_file("/run/current-system/init-interface-version", err_mode => 'quiet') // ""; @@ -83,7 +85,7 @@ Warning: the new NixOS configuration has an ‘init’ that is incompatible with the current configuration. The new configuration won\'t take effect until you reboot the system. EOF - exit 100; + exit(100); } # Ignore SIGHUP so that we're not killed if we're running on (say) @@ -104,14 +106,27 @@ sub getActiveUnits { return $res; } +# Returns whether a systemd unit is active +sub unit_is_active { + my ($unit_name) = @_; + + my $mgr = Net::DBus->system->get_service('org.freedesktop.systemd1')->get_object('/org/freedesktop/systemd1'); + my $units = $mgr->ListUnitsByNames([$unit_name]); + if (scalar(@{$units}) == 0) { + return 0; + } + my $active_state = $units->[0]->[3]; ## no critic (ValuesAndExpressions::ProhibitMagicNumbers) + return $active_state eq 'active' || $active_state eq 'activating'; +} + sub parseFstab { my ($filename) = @_; my ($fss, $swaps); foreach my $line (read_file($filename, err_mode => 'quiet')) { - chomp $line; + chomp($line); $line =~ s/^\s*#.*//; next if $line =~ /^\s*$/; - my @xs = split / /, $line; + my @xs = split(/ /, $line); if ($xs[2] eq "swap") { $swaps->{$xs[0]} = { options => $xs[3] // "" }; } else { @@ -133,17 +148,16 @@ sub parseFstab { sub parseSystemdIni { my ($unitContents, $path) = @_; # Tie the ini file to a hash for easier access - my %fileContents; - tie %fileContents, "Config::IniFiles", (-file => $path, -allowempty => 1, -allowcontinue => 1); + tie(my %fileContents, 'Config::IniFiles', (-file => $path, -allowempty => 1, -allowcontinue => 1)); ## no critic(Miscellanea::ProhibitTies) # Copy over all sections - foreach my $sectionName (keys %fileContents) { + foreach my $sectionName (keys(%fileContents)) { if ($sectionName eq "Install") { # Skip the [Install] section because it has no relevant keys for us next; } # Copy over all keys - foreach my $iniKey (keys %{$fileContents{$sectionName}}) { + foreach my $iniKey (keys(%{$fileContents{$sectionName}})) { # Ensure the value is an array so it's easier to work with my $iniValue = $fileContents{$sectionName}{$iniKey}; my @iniValues; @@ -181,7 +195,7 @@ sub parse_unit { # Replace \ with \\ so glob() still works with units that have a \ in them # Valid characters in unit names are ASCII letters, digits, ":", "-", "_", ".", and "\" $unit_path =~ s/\\/\\\\/gmsx; - foreach (glob "${unit_path}{,.d/*.conf}") { + foreach (glob("${unit_path}{,.d/*.conf}")) { parseSystemdIni(\%unit_data, "$_") } return %unit_data; @@ -194,7 +208,7 @@ sub parseSystemdBool { my @values = @{$unitConfig->{$sectionName}{$boolName} // []}; # Return default if value is not set - if (scalar @values lt 1 || not defined $values[-1]) { + if (scalar(@values) lt 1 || not defined($values[-1])) { return $default; } # If value is defined multiple times, use the last definition @@ -211,7 +225,7 @@ sub recordUnit { # The opposite of recordUnit, removes a unit name from a file sub unrecord_unit { my ($fn, $unit) = @_; - edit_file { s/^$unit\n//msx } $fn if $action ne "dry-activate"; + edit_file(sub { s/^$unit\n//msx }, $fn) if $action ne "dry-activate"; } # Compare the contents of two unit files and return whether the unit @@ -226,6 +240,16 @@ sub unrecord_unit { sub compare_units { my ($old_unit, $new_unit) = @_; my $ret = 0; + # Keys to ignore in the [Unit] section + my %unit_section_ignores = map { $_ => 1 } qw( + X-Reload-Triggers + Description Documentation + OnFailure OnSuccess OnFailureJobMode + IgnoreOnIsolate StopWhenUnneeded + RefuseManualStart RefuseManualStop + AllowIsolate CollectMode + SourcePath + ); my $comp_array = sub { my ($a, $b) = @_; @@ -233,11 +257,23 @@ sub compare_units { }; # Comparison hash for the sections - my %section_cmp = map { $_ => 1 } keys %{$new_unit}; + my %section_cmp = map { $_ => 1 } keys(%{$new_unit}); # Iterate over the sections - foreach my $section_name (keys %{$old_unit}) { + foreach my $section_name (keys(%{$old_unit})) { # Missing section in the new unit? - if (not exists $section_cmp{$section_name}) { + if (not exists($section_cmp{$section_name})) { + # If the [Unit] section was removed, make sure that only keys + # were in it that are ignored + if ($section_name eq 'Unit') { + foreach my $ini_key (keys(%{$old_unit->{'Unit'}})) { + if (not defined($unit_section_ignores{$ini_key})) { + return 1; + } + } + next; # check the next section + } else { + return 1; + } if ($section_name eq 'Unit' and %{$old_unit->{'Unit'}} == 1 and defined(%{$old_unit->{'Unit'}}{'X-Reload-Triggers'})) { # If a new [Unit] section was removed that only contained X-Reload-Triggers, # do nothing. @@ -248,15 +284,15 @@ sub compare_units { } delete $section_cmp{$section_name}; # Comparison hash for the section contents - my %ini_cmp = map { $_ => 1 } keys %{$new_unit->{$section_name}}; + my %ini_cmp = map { $_ => 1 } keys(%{$new_unit->{$section_name}}); # Iterate over the keys of the section - foreach my $ini_key (keys %{$old_unit->{$section_name}}) { + foreach my $ini_key (keys(%{$old_unit->{$section_name}})) { delete $ini_cmp{$ini_key}; my @old_value = @{$old_unit->{$section_name}{$ini_key}}; # If the key is missing in the new unit, they are different... if (not $new_unit->{$section_name}{$ini_key}) { - # ... unless the key that is now missing was the reload trigger - if ($section_name eq 'Unit' and $ini_key eq 'X-Reload-Triggers') { + # ... unless the key that is now missing is one of the ignored keys + if ($section_name eq 'Unit' and defined($unit_section_ignores{$ini_key})) { next; } return 1; @@ -264,19 +300,30 @@ sub compare_units { my @new_value = @{$new_unit->{$section_name}{$ini_key}}; # If the contents are different, the units are different if (not $comp_array->(\@old_value, \@new_value)) { - # Check if only the reload triggers changed - if ($section_name eq 'Unit' and $ini_key eq 'X-Reload-Triggers') { - $ret = 2; - } else { - return 1; + # Check if only the reload triggers changed or one of the ignored keys + if ($section_name eq 'Unit') { + if ($ini_key eq 'X-Reload-Triggers') { + $ret = 2; + next; + } elsif (defined($unit_section_ignores{$ini_key})) { + next; + } } + return 1; } } # A key was introduced that was missing in the old unit if (%ini_cmp) { - if ($section_name eq 'Unit' and %ini_cmp == 1 and defined($ini_cmp{'X-Reload-Triggers'})) { - # If the newly introduced key was the reload triggers, reload the unit - $ret = 2; + if ($section_name eq 'Unit') { + foreach my $ini_key (keys(%ini_cmp)) { + if ($ini_key eq 'X-Reload-Triggers') { + $ret = 2; + } elsif (defined($unit_section_ignores{$ini_key})) { + next; + } else { + return 1; + } + } } else { return 1; } @@ -284,10 +331,14 @@ sub compare_units { } # A section was introduced that was missing in the old unit if (%section_cmp) { - if (%section_cmp == 1 and defined($section_cmp{'Unit'}) and %{$new_unit->{'Unit'}} == 1 and defined(%{$new_unit->{'Unit'}}{'X-Reload-Triggers'})) { - # If a new [Unit] section was introduced that only contains X-Reload-Triggers, - # reload instead of restarting - $ret = 2; + if (%section_cmp == 1 and defined($section_cmp{'Unit'})) { + foreach my $ini_key (keys(%{$new_unit->{'Unit'}})) { + if (not defined($unit_section_ignores{$ini_key})) { + return 1; + } elsif ($ini_key eq 'X-Reload-Triggers') { + $ret = 2; + } + } } else { return 1; } @@ -343,11 +394,11 @@ sub handleModifiedUnit { my $socket_activated = 0; if ($unit =~ /\.service$/) { my @sockets = split(/ /, join(" ", @{$unitInfo{Service}{Sockets} // []})); - if (scalar @sockets == 0) { + if (scalar(@sockets) == 0) { @sockets = ("$baseName.socket"); } foreach my $socket (@sockets) { - if (defined $activePrev->{$socket}) { + if (defined($activePrev->{$socket})) { # We can now be sure this is a socket-activate unit $unitsToStop->{$socket} = 1; @@ -355,7 +406,11 @@ sub handleModifiedUnit { # exist in new configuration: if (-e "$out/etc/systemd/system/$socket") { $unitsToStart->{$socket} = 1; - recordUnit($startListFile, $socket); + if ($unitsToStart eq $unitsToRestart) { + recordUnit($restartListFile, $socket); + } else { + recordUnit($startListFile, $socket); + } $socket_activated = 1; } # Remove from units to reload so we don't restart and reload @@ -373,7 +428,11 @@ sub handleModifiedUnit { # service gets restarted if we're interrupted. if (!$socket_activated) { $unitsToStart->{$unit} = 1; - recordUnit($startListFile, $unit); + if ($unitsToStart eq $unitsToRestart) { + recordUnit($restartListFile, $unit); + } else { + recordUnit($startListFile, $unit); + } } $unitsToStop->{$unit} = 1; @@ -401,8 +460,8 @@ $unitsToRestart{$_} = 1 foreach $unitsToReload{$_} = 1 foreach split('\n', read_file($reloadListFile, err_mode => 'quiet') // ""); -my $activePrev = getActiveUnits; -while (my ($unit, $state) = each %{$activePrev}) { +my $activePrev = getActiveUnits(); +while (my ($unit, $state) = each(%{$activePrev})) { my $baseUnit = $unit; my $prevUnitFile = "/etc/systemd/system/$baseUnit"; @@ -462,9 +521,9 @@ while (my ($unit, $state) = each %{$activePrev}) { my %old_unit_info = parse_unit($prevUnitFile); my %new_unit_info = parse_unit($newUnitFile); my $diff = compare_units(\%old_unit_info, \%new_unit_info); - if ($diff eq 1) { + if ($diff == 1) { handleModifiedUnit($unit, $baseName, $newUnitFile, \%new_unit_info, $activePrev, \%unitsToStop, \%unitsToStart, \%unitsToReload, \%unitsToRestart, \%unitsToSkip); - } elsif ($diff eq 2 and not $unitsToRestart{$unit}) { + } elsif ($diff == 2 and not $unitsToRestart{$unit}) { $unitsToReload{$unit} = 1; recordUnit($reloadListFile, $unit); } @@ -475,11 +534,11 @@ while (my ($unit, $state) = each %{$activePrev}) { sub pathToUnitName { my ($path) = @_; # Use current version of systemctl binary before daemon is reexeced. - open my $cmd, "-|", "$curSystemd/systemd-escape", "--suffix=mount", "-p", $path + open(my $cmd, "-|", "$curSystemd/systemd-escape", "--suffix=mount", "-p", $path) or die "Unable to escape $path!\n"; - my $escaped = join "", <$cmd>; - chomp $escaped; - close $cmd or die; + my $escaped = join("", <$cmd>); + chomp($escaped); + close($cmd) or die('Unable to close systemd-escape pipe'); return $escaped; } @@ -488,13 +547,13 @@ sub pathToUnitName { # automatically by starting local-fs.target. FIXME: might be nicer if # we generated units for all mounts; then we could unify this with the # unit checking code above. -my ($prevFss, $prevSwaps) = parseFstab "/etc/fstab"; -my ($newFss, $newSwaps) = parseFstab "$out/etc/fstab"; -foreach my $mountPoint (keys %$prevFss) { +my ($prevFss, $prevSwaps) = parseFstab("/etc/fstab"); +my ($newFss, $newSwaps) = parseFstab("$out/etc/fstab"); +foreach my $mountPoint (keys(%$prevFss)) { my $prev = $prevFss->{$mountPoint}; my $new = $newFss->{$mountPoint}; my $unit = pathToUnitName($mountPoint); - if (!defined $new) { + if (!defined($new)) { # Filesystem entry disappeared, so unmount it. $unitsToStop{$unit} = 1; } elsif ($prev->{fsType} ne $new->{fsType} || $prev->{device} ne $new->{device}) { @@ -510,10 +569,10 @@ foreach my $mountPoint (keys %$prevFss) { } # Also handles swap devices. -foreach my $device (keys %$prevSwaps) { +foreach my $device (keys(%$prevSwaps)) { my $prev = $prevSwaps->{$device}; my $new = $newSwaps->{$device}; - if (!defined $new) { + if (!defined($new)) { # Swap entry disappeared, so turn it off. Can't use # "systemctl stop" here because systemd has lots of alias # units that prevent a stop from actually calling @@ -544,8 +603,8 @@ if ($prevSystemdSystemConfig ne $newSystemdSystemConfig) { sub filterUnits { my ($units) = @_; my @res; - foreach my $unit (sort(keys %{$units})) { - push @res, $unit if !defined $unitsToFilter{$unit}; + foreach my $unit (sort(keys(%{$units}))) { + push(@res, $unit) if !defined($unitsToFilter{$unit}); } return @res; } @@ -556,9 +615,9 @@ my @unitsToStopFiltered = filterUnits(\%unitsToStop); # Show dry-run actions. if ($action eq "dry-activate") { print STDERR "would stop the following units: ", join(", ", @unitsToStopFiltered), "\n" - if scalar @unitsToStopFiltered > 0; - print STDERR "would NOT stop the following changed units: ", join(", ", sort(keys %unitsToSkip)), "\n" - if scalar(keys %unitsToSkip) > 0; + if scalar(@unitsToStopFiltered) > 0; + print STDERR "would NOT stop the following changed units: ", join(", ", sort(keys(%unitsToSkip))), "\n" + if scalar(keys(%unitsToSkip)) > 0; print STDERR "would activate the configuration...\n"; system("$out/dry-activate", "$out"); @@ -579,7 +638,7 @@ if ($action eq "dry-activate") { $baseName =~ s/\.[a-z]*$//; # Start units if they were not active previously - if (not defined $activePrev->{$unit}) { + if (not defined($activePrev->{$unit})) { $unitsToStart{$unit} = 1; next; } @@ -599,28 +658,28 @@ if ($action eq "dry-activate") { unlink($dryReloadByActivationFile); print STDERR "would restart systemd\n" if $restartSystemd; - print STDERR "would reload the following units: ", join(", ", sort(keys %unitsToReload)), "\n" - if scalar(keys %unitsToReload) > 0; - print STDERR "would restart the following units: ", join(", ", sort(keys %unitsToRestart)), "\n" - if scalar(keys %unitsToRestart) > 0; + print STDERR "would reload the following units: ", join(", ", sort(keys(%unitsToReload))), "\n" + if scalar(keys(%unitsToReload)) > 0; + print STDERR "would restart the following units: ", join(", ", sort(keys(%unitsToRestart))), "\n" + if scalar(keys(%unitsToRestart)) > 0; my @unitsToStartFiltered = filterUnits(\%unitsToStart); print STDERR "would start the following units: ", join(", ", @unitsToStartFiltered), "\n" - if scalar @unitsToStartFiltered; + if scalar(@unitsToStartFiltered); exit 0; } syslog(LOG_NOTICE, "switching to system configuration $out"); -if (scalar (keys %unitsToStop) > 0) { +if (scalar(keys(%unitsToStop)) > 0) { print STDERR "stopping the following units: ", join(", ", @unitsToStopFiltered), "\n" - if scalar @unitsToStopFiltered; + if scalar(@unitsToStopFiltered); # Use current version of systemctl binary before daemon is reexeced. - system("$curSystemd/systemctl", "stop", "--", sort(keys %unitsToStop)); + system("$curSystemd/systemctl", "stop", "--", sort(keys(%unitsToStop))); } -print STDERR "NOT restarting the following changed units: ", join(", ", sort(keys %unitsToSkip)), "\n" - if scalar(keys %unitsToSkip) > 0; +print STDERR "NOT restarting the following changed units: ", join(", ", sort(keys(%unitsToSkip))), "\n" + if scalar(keys(%unitsToSkip)) > 0; # Activate the new configuration (i.e., update /etc, make accounts, # and so on). @@ -644,7 +703,7 @@ foreach (split('\n', read_file($restartByActivationFile, err_mode => 'quiet') // $baseName =~ s/\.[a-z]*$//; # Start units if they were not active previously - if (not defined $activePrev->{$unit}) { + if (not defined($activePrev->{$unit})) { $unitsToStart{$unit} = 1; recordUnit($startListFile, $unit); next; @@ -681,7 +740,7 @@ system("@systemd@/bin/systemctl", "reset-failed"); system("@systemd@/bin/systemctl", "daemon-reload") == 0 or $res = 3; # Reload user units -open my $listActiveUsers, '-|', '@systemd@/bin/loginctl', 'list-users', '--no-legend'; +open(my $listActiveUsers, '-|', '@systemd@/bin/loginctl', 'list-users', '--no-legend'); while (my $f = <$listActiveUsers>) { next unless $f =~ /^\s*(?<uid>\d+)\s+(?<user>\S+)/; my ($uid, $name) = ($+{uid}, $+{user}); @@ -693,25 +752,43 @@ while (my $f = <$listActiveUsers>) { "@systemd@/bin/systemctl --user start nixos-activation.service"); } -close $listActiveUsers; +close($listActiveUsers); # Set the new tmpfiles print STDERR "setting up tmpfiles\n"; system("@systemd@/bin/systemd-tmpfiles", "--create", "--remove", "--exclude-prefix=/dev") == 0 or $res = 3; +# Before reloading we need to ensure that the units are still active. They may have been +# deactivated because one of their requirements got stopped. If they are inactive +# but should have been reloaded, the user probably expects them to be started. +if (scalar(keys(%unitsToReload)) > 0) { + for my $unit (keys(%unitsToReload)) { + if (!unit_is_active($unit)) { + # Figure out if we need to start the unit + my %unit_info = parse_unit("$out/etc/systemd/system/$unit"); + if (!(parseSystemdBool(\%unit_info, 'Unit', 'RefuseManualStart', 0) || parseSystemdBool(\%unit_info, 'Unit', 'X-OnlyManualStart', 0))) { + $unitsToStart{$unit} = 1; + recordUnit($startListFile, $unit); + } + # Don't reload the unit, reloading would fail + delete %unitsToReload{$unit}; + unrecord_unit($reloadListFile, $unit); + } + } +} # Reload units that need it. This includes remounting changed mount # units. -if (scalar(keys %unitsToReload) > 0) { - print STDERR "reloading the following units: ", join(", ", sort(keys %unitsToReload)), "\n"; - system("@systemd@/bin/systemctl", "reload", "--", sort(keys %unitsToReload)) == 0 or $res = 4; +if (scalar(keys(%unitsToReload)) > 0) { + print STDERR "reloading the following units: ", join(", ", sort(keys(%unitsToReload))), "\n"; + system("@systemd@/bin/systemctl", "reload", "--", sort(keys(%unitsToReload))) == 0 or $res = 4; unlink($reloadListFile); } # Restart changed services (those that have to be restarted rather # than stopped and started). -if (scalar(keys %unitsToRestart) > 0) { - print STDERR "restarting the following units: ", join(", ", sort(keys %unitsToRestart)), "\n"; - system("@systemd@/bin/systemctl", "restart", "--", sort(keys %unitsToRestart)) == 0 or $res = 4; +if (scalar(keys(%unitsToRestart)) > 0) { + print STDERR "restarting the following units: ", join(", ", sort(keys(%unitsToRestart))), "\n"; + system("@systemd@/bin/systemctl", "restart", "--", sort(keys(%unitsToRestart))) == 0 or $res = 4; unlink($restartListFile); } @@ -723,17 +800,17 @@ if (scalar(keys %unitsToRestart) > 0) { # systemd. my @unitsToStartFiltered = filterUnits(\%unitsToStart); print STDERR "starting the following units: ", join(", ", @unitsToStartFiltered), "\n" - if scalar @unitsToStartFiltered; -system("@systemd@/bin/systemctl", "start", "--", sort(keys %unitsToStart)) == 0 or $res = 4; + if scalar(@unitsToStartFiltered); +system("@systemd@/bin/systemctl", "start", "--", sort(keys(%unitsToStart))) == 0 or $res = 4; unlink($startListFile); # Print failed and new units. my (@failed, @new); -my $activeNew = getActiveUnits; -while (my ($unit, $state) = each %{$activeNew}) { +my $activeNew = getActiveUnits(); +while (my ($unit, $state) = each(%{$activeNew})) { if ($state->{state} eq "failed") { - push @failed, $unit; + push(@failed, $unit); next; } @@ -743,7 +820,7 @@ while (my ($unit, $state) = each %{$activeNew}) { chomp($main_status); if ($main_status ne "0") { - push @failed, $unit; + push(@failed, $unit); next; } } @@ -751,19 +828,19 @@ while (my ($unit, $state) = each %{$activeNew}) { # Ignore scopes since they are not managed by this script but rather # created and managed by third-party services via the systemd dbus API. # This only lists units that are not failed (including ones that are in auto-restart but have not failed previously) - if ($state->{state} ne "failed" && !defined $activePrev->{$unit} && $unit !~ /\.scope$/msx) { - push @new, $unit; + if ($state->{state} ne "failed" && !defined($activePrev->{$unit}) && $unit !~ /\.scope$/msx) { + push(@new, $unit); } } -if (scalar @new > 0) { +if (scalar(@new) > 0) { print STDERR "the following new units were started: ", join(", ", sort(@new)), "\n" } -if (scalar @failed > 0) { - my @failed_sorted = sort @failed; +if (scalar(@failed) > 0) { + my @failed_sorted = sort(@failed); print STDERR "warning: the following units failed: ", join(", ", @failed_sorted), "\n\n"; - system "@systemd@/bin/systemctl status --no-pager --full '" . join("' '", @failed_sorted) . "' >&2"; + system("@systemd@/bin/systemctl status --no-pager --full '" . join("' '", @failed_sorted) . "' >&2"); $res = 4; } @@ -773,4 +850,4 @@ if ($res == 0) { syslog(LOG_ERR, "switching to system configuration $out failed (status $res)"); } -exit $res; +exit($res); |