treewide: Fix all Nix ASTs in all markdown files

This allows for correct highlighting and maybe future automatic
formatting. The AST was verified to work with nixfmt only.

5 files changed, 64 insertions, 47 deletions

diff --git a/doc/build-helpers/fetchers.chapter.md b/doc/build-helpers/fetchers.chapter.md
index e8521861208f..123585c6dd2d 100644
--- a/doc/build-helpers/fetchers.chapter.md
+++ b/doc/build-helpers/fetchers.chapter.md
@@ -30,7 +30,7 @@ For example, consider the following fetcher:
 fetchurl {
   url = "http://www.example.org/hello-1.0.tar.gz";
   hash = "sha256-lTeyxzJNQeMdu1IVdovNMtgn77jRIhSybLdMbTkf2Ww=";
-};
+}
 ```
 
 A common mistake is to update a fetcher’s URL, or a version parameter, without updating the hash.
@@ -39,7 +39,7 @@ A common mistake is to update a fetcher’s URL, or a version parameter, without
 fetchurl {
   url = "http://www.example.org/hello-1.1.tar.gz";
   hash = "sha256-lTeyxzJNQeMdu1IVdovNMtgn77jRIhSybLdMbTkf2Ww=";
-};
+}
 ```
 
 **This will reuse the old contents**.
@@ -49,7 +49,7 @@ Remember to invalidate the hash argument, in this case by setting the `hash` att
 fetchurl {
   url = "http://www.example.org/hello-1.1.tar.gz";
   hash = "";
-};
+}
 ```
 
 Use the resulting error message to determine the correct hash.
@@ -123,7 +123,7 @@ Here is an example of `fetchDebianPatch` in action:
 buildPythonPackage rec {
   pname = "pysimplesoap";
   version = "1.16.2";
-  src = ...;
+  src = "...";
 
   patches = [
     (fetchDebianPatch {
@@ -134,7 +134,7 @@ buildPythonPackage rec {
     })
   ];
 
-  ...
+  # ...
 }
 ```
 
diff --git a/doc/build-helpers/images/dockertools.section.md b/doc/build-helpers/images/dockertools.section.md
index 001d5695290e..527e623e7898 100644
--- a/doc/build-helpers/images/dockertools.section.md
+++ b/doc/build-helpers/images/dockertools.section.md
@@ -1177,6 +1177,7 @@ dockerTools.buildImage {
     hello
     dockerTools.binSh
   ];
+}
 ```
 
 After building the image and loading it in Docker, we can create a container based on it and enter a shell inside the container.
diff --git a/doc/build-helpers/special/checkpoint-build.section.md b/doc/build-helpers/special/checkpoint-build.section.md
index f60afe801ed4..a1ce5608f246 100644
--- a/doc/build-helpers/special/checkpoint-build.section.md
+++ b/doc/build-helpers/special/checkpoint-build.section.md
@@ -9,13 +9,17 @@ However, we can tell Nix explicitly what the previous build state was, by repres
 To change a normal derivation to a checkpoint based build, these steps must be taken:
   - apply `prepareCheckpointBuild` on the desired derivation, e.g.
 ```nix
-checkpointArtifacts = (pkgs.checkpointBuildTools.prepareCheckpointBuild pkgs.virtualbox);
+{
+  checkpointArtifacts = (pkgs.checkpointBuildTools.prepareCheckpointBuild pkgs.virtualbox);
+}
 ```
   - change something you want in the sources of the package, e.g. use a source override:
 ```nix
-changedVBox = pkgs.virtualbox.overrideAttrs (old: {
-  src = path/to/vbox/sources;
-});
+{
+  changedVBox = pkgs.virtualbox.overrideAttrs (old: {
+    src = path/to/vbox/sources;
+  });
+}
 ```
   - use `mkCheckpointBuild changedVBox checkpointArtifacts`
   - enjoy shorter build times
diff --git a/doc/build-helpers/testers.chapter.md b/doc/build-helpers/testers.chapter.md
index 35f9290ecbfb..b734cbbbd4e2 100644
--- a/doc/build-helpers/testers.chapter.md
+++ b/doc/build-helpers/testers.chapter.md
@@ -14,11 +14,13 @@ If the `moduleNames` argument is omitted, `hasPkgConfigModules` will use `meta.p
 # Check that `pkg-config` modules are exposed using default values
 
 ```nix
-passthru.tests.pkg-config = testers.hasPkgConfigModules {
-  package = finalAttrs.finalPackage;
-};
+{
+  passthru.tests.pkg-config = testers.hasPkgConfigModules {
+    package = finalAttrs.finalPackage;
+  };
 
-meta.pkgConfigModules = [ "libfoo" ];
+  meta.pkgConfigModules = [ "libfoo" ];
+}
 ```
 
 :::
@@ -28,10 +30,12 @@ meta.pkgConfigModules = [ "libfoo" ];
 # Check that `pkg-config` modules are exposed using explicit module names
 
 ```nix
-passthru.tests.pkg-config = testers.hasPkgConfigModules {
-  package = finalAttrs.finalPackage;
-  moduleNames = [ "libfoo" ];
-};
+{
+  passthru.tests.pkg-config = testers.hasPkgConfigModules {
+    package = finalAttrs.finalPackage;
+    moduleNames = [ "libfoo" ];
+  };
+}
 ```
 
 :::
@@ -55,7 +59,9 @@ The default argument to the command is `--version`, and the version to be checke
 This example will run the command `hello --version`, and then check that the version of the `hello` package is in the output of the command.
 
 ```nix
-passthru.tests.version = testers.testVersion { package = hello; };
+{
+  passthru.tests.version = testers.testVersion { package = hello; };
+}
 ```
 
 :::
@@ -70,13 +76,15 @@ This means that an output like "leetcode 0.4.21" would fail the tests, and an ou
 A common usage of the `version` attribute is to specify `version = "v${version}"`.
 
 ```nix
-version = "0.4.2";
+{
+  version = "0.4.2";
 
-passthru.tests.version = testers.testVersion {
-  package = leetcode-cli;
-  command = "leetcode -V";
-  version = "leetcode ${version}";
-};
+  passthru.tests.version = testers.testVersion {
+    package = leetcode-cli;
+    command = "leetcode -V";
+    version = "leetcode ${version}";
+  };
+}
 ```
 
 :::
@@ -116,7 +124,7 @@ runCommand "example" {
   grep -F 'failing though' $failed/testBuildFailure.log
   [[ 3 = $(cat $failed/testBuildFailure.exit) ]]
   touch $out
-'';
+''
 ```
 
 :::
@@ -193,12 +201,14 @@ once to get a derivation hash, and again to produce the final fixed output deriv
 # Prevent nix from reusing the output of a fetcher
 
 ```nix
-tests.fetchgit = testers.invalidateFetcherByDrvHash fetchgit {
-  name = "nix-source";
-  url = "https://github.com/NixOS/nix";
-  rev = "9d9dbe6ed05854e03811c361a3380e09183f4f4a";
-  hash = "sha256-7DszvbCNTjpzGRmpIVAWXk20P0/XTrWZ79KSOGLrUWY=";
-};
+{
+  tests.fetchgit = testers.invalidateFetcherByDrvHash fetchgit {
+    name = "nix-source";
+    url = "https://github.com/NixOS/nix";
+    rev = "9d9dbe6ed05854e03811c361a3380e09183f4f4a";
+    hash = "sha256-7DszvbCNTjpzGRmpIVAWXk20P0/XTrWZ79KSOGLrUWY=";
+  };
+}
 ```
 
 :::
diff --git a/doc/build-helpers/trivial-build-helpers.chapter.md b/doc/build-helpers/trivial-build-helpers.chapter.md
index c9985bda7923..4f2754903f9b 100644
--- a/doc/build-helpers/trivial-build-helpers.chapter.md
+++ b/doc/build-helpers/trivial-build-helpers.chapter.md
@@ -76,12 +76,14 @@ If you need to refer to the resulting files somewhere else in a Nix expression,
 For example, if the file destination is a directory:
 
 ```nix
-my-file = writeTextFile {
-  name = "my-file";
-  text = ''
-    Contents of File
-  '';
-  destination = "/share/my-file";
+{
+  my-file = writeTextFile {
+    name = "my-file";
+    text = ''
+      Contents of File
+    '';
+    destination = "/share/my-file";
+  };
 }
 ```
 
@@ -90,7 +92,7 @@ Remember to append "/share/my-file" to the resulting store path when using it el
 ```nix
 writeShellScript "evaluate-my-file.sh" ''
   cat ${my-file}/share/my-file
-'';
+''
 ```
 ::::
 
@@ -287,7 +289,7 @@ writeTextFile {
   };
   allowSubstitutes = true;
   preferLocalBuild = false;
-};
+}
 ```
 :::
 
@@ -351,7 +353,7 @@ Write the string `Contents of File` to `/nix/store/<store path>`:
 writeText "my-file"
   ''
   Contents of File
-  '';
+  ''
 ```
 :::
 
@@ -391,7 +393,7 @@ Write the string `Contents of File` to `/nix/store/<store path>/share/my-file`:
 writeTextDir "share/my-file"
   ''
   Contents of File
-  '';
+  ''
 ```
 :::
 
@@ -433,7 +435,7 @@ Write the string `Contents of File` to `/nix/store/<store path>` and make the fi
 writeScript "my-file"
   ''
   Contents of File
-  '';
+  ''
 ```
 :::
 
@@ -475,7 +477,7 @@ The store path will include the the name, and it will be a directory.
 writeScriptBin "my-script"
   ''
   echo "hi"
-  '';
+  ''
 ```
 :::
 
@@ -519,7 +521,7 @@ This function is almost exactly like [](#trivial-builder-writeScript), except th
 writeShellScript "my-script"
   ''
   echo "hi"
-  '';
+  ''
 ```
 :::
 
@@ -562,7 +564,7 @@ This function is a combination of [](#trivial-builder-writeShellScript) and [](#
 writeShellScriptBin "my-script"
   ''
   echo "hi"
-  '';
+  ''
 ```
 :::
 
@@ -674,7 +676,7 @@ writeClosure [ (writeScriptBin "hi" ''${hello}/bin/hello'') ]
 
 produces an output path `/nix/store/<hash>-runtime-deps` containing
 
-```nix
+```
 /nix/store/<hash>-hello-2.10
 /nix/store/<hash>-hi
 /nix/store/<hash>-libidn2-2.3.0
@@ -700,7 +702,7 @@ writeDirectReferencesToFile (writeScriptBin "hi" ''${hello}/bin/hello'')
 
 produces an output path `/nix/store/<hash>-runtime-references` containing
 
-```nix
+```
 /nix/store/<hash>-hello-2.10
 ```