diff options
Diffstat (limited to 'inversepath/usbarmory/usbarmory_dts.patch')
-rw-r--r-- | inversepath/usbarmory/usbarmory_dts.patch | 418 |
1 files changed, 418 insertions, 0 deletions
diff --git a/inversepath/usbarmory/usbarmory_dts.patch b/inversepath/usbarmory/usbarmory_dts.patch new file mode 100644 index 0000000..e29c6dd --- /dev/null +++ b/inversepath/usbarmory/usbarmory_dts.patch @@ -0,0 +1,418 @@ +diff -Nru linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-common.dtsi linux-4.4/arch/arm/boot/dts/imx53-usbarmory-common.dtsi +--- linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-common.dtsi 1969-12-31 18:00:00.000000000 -0600 ++++ linux-4.4/arch/arm/boot/dts/imx53-usbarmory-common.dtsi 2016-02-04 08:31:38.730794858 -0600 +@@ -0,0 +1,241 @@ ++/* ++ * USB armory MkI device tree include file ++ * https://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano <andrej@inversepath.com> ++ * ++ * Licensed under GPLv2 ++ */ ++ ++#include "imx53.dtsi" ++ ++/ { ++ model = "Inverse Path USB armory"; ++ compatible = "inversepath,imx53-usbarmory", "fsl,imx53"; ++}; ++ ++/ { ++ chosen { ++ stdout-path = &uart1; ++ }; ++ ++ memory { ++ reg = <0x70000000 0x20000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_pin_gpio4_27>; ++ ++ user { ++ label = "LED"; ++ gpios = <&gpio4 27 0>; ++ linux,default-trigger = "heartbeat"; ++ }; ++ }; ++ ++ soc { ++ aips@60000000 { ++ sahara: crypto@63ff8000 { ++ compatible = "fsl,imx53-sahara"; ++ reg = <0x63ff8000 0x4000>; ++ interrupts = <19 20>; ++ clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, ++ <&clks IMX5_CLK_SAHARA_IPG_GATE>; ++ clock-names = "ipg", "ahb"; ++ }; ++ }; ++ }; ++}; ++ ++&cpu0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a8"; ++ reg = <0x0>; ++ clocks = <&clks IMX5_CLK_ARM>; ++ clock-latency = <61036>; ++ voltage-tolerance = <5>; ++ operating-points = < ++ /* kHz */ ++ 166666 850000 ++ 400000 900000 ++ 800000 1050000 ++ >; ++}; ++ ++&esdhc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_esdhc1>; ++ status = "okay"; ++}; ++ ++&iomuxc { ++ pinctrl-names = "default"; ++ ++ imx53-usbarmory { ++ led_pin_gpio4_27: led_gpio4_27@0 { ++ fsl,pins = < ++ MX53_PAD_DISP0_DAT6__GPIO4_27 0x80000000 ++ >; ++ }; ++ ++ pinctrl_esdhc1: esdhc1grp { ++ fsl,pins = < ++ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 ++ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 ++ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 ++ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 ++ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 ++ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 ++ >; ++ }; ++ ++ pinctrl_i2c1_pmic: i2c1grp_pmic { ++ fsl,pins = < ++ MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 ++ MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 ++ >; ++ }; ++ ++ /* ++ UART mode pin header configration: ++ pin number: 1 2 3 4 5 6 7 ++ function: GND 5V ? ? TX RX ? ++ */ ++ pinctrl_uart1: uart1grp { ++ fsl,pins = < ++ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 ++ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4 ++ >; ++ }; ++ ++ /* ++ GPIO mode pin header configuration: ++ 1 2 3 4 5 6 7 ++ GND 5V GPIO5[26] GPIO5[27] GPIO5[28] GPIO5[29] GPIO5[30] ++ */ ++ pinctrl_gpio5: gpio5grp { ++ fsl,pins = < ++ MX53_PAD_CSI0_DAT8__GPIO5_26 0xc0 ++ MX53_PAD_CSI0_DAT9__GPIO5_27 0xc0 ++ MX53_PAD_CSI0_DAT10__GPIO5_28 0xc0 ++ MX53_PAD_CSI0_DAT11__GPIO5_29 0xc0 ++ MX53_PAD_CSI0_DAT12__GPIO5_30 0xc0 ++ >; ++ }; ++ ++ /* ++ SPI mode pin header configuration: ++ 1 2 3 4 5 6 7 ++ GND 5V SCLK MOSI MISO /SS0 /SS1 ++ */ ++ pinctrl_ecspi2: ecspi2grp { ++ fsl,pins = < ++ MX53_PAD_CSI0_DAT8__ECSPI2_SCLK 0x80000000 ++ MX53_PAD_CSI0_DAT9__ECSPI2_MOSI 0x80000000 ++ MX53_PAD_CSI0_DAT10__ECSPI2_MISO 0x80000000 ++ MX53_PAD_CSI0_DAT11__GPIO5_29 0x80000000 ++ MX53_PAD_CSI0_DAT12__GPIO5_30 0x80000000 ++ >; ++ }; ++ ++ /* ++ I2C mode pin header configuration: ++ 1 2 3 4 5 6 7 ++ GND 5V SDA SCL GPIO5[28] GPIO5[29] GPIO5[30] ++ */ ++ pinctrl_i2c1_pinheader: i2c1grp_pinheader { ++ fsl,pins = < ++ MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000 ++ MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 ++ MX53_PAD_CSI0_DAT10__GPIO5_28 0x80000000 ++ MX53_PAD_CSI0_DAT11__GPIO5_29 0x80000000 ++ MX53_PAD_CSI0_DAT12__GPIO5_30 0x80000000 ++ >; ++ }; ++ }; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart1>; ++ status = "okay"; ++}; ++ ++&vpu { ++ status = "okay"; ++}; ++ ++&i2c1 { ++ pinctrl-0 = <&pinctrl_i2c1_pmic>; ++ status = "okay"; ++ ltc3589: pmic@34 { ++ compatible = "lltc,ltc3589-2"; ++ reg = <0x34>; ++ regulators { ++ sw1_reg: sw1 { ++ regulator-min-microvolt = <591930>; ++ regulator-max-microvolt = <1224671>; ++ lltc,fb-voltage-divider = <100000 158000>; ++ regulator-ramp-delay = <7000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw2_reg: sw2 { ++ regulator-min-microvolt = <704123>; ++ regulator-max-microvolt = <1456803>; ++ lltc,fb-voltage-divider = <180000 191000>; ++ regulator-ramp-delay = <7000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw3_reg: sw3 { ++ regulator-min-microvolt = <1341250>; ++ regulator-max-microvolt = <2775000>; ++ lltc,fb-voltage-divider = <270000 100000>; ++ regulator-ramp-delay = <7000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ bb_out_reg: bb-out { ++ regulator-min-microvolt = <3387341>; ++ regulator-max-microvolt = <3387341>; ++ lltc,fb-voltage-divider = <511000 158000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ldo1_reg: ldo1 { ++ regulator-min-microvolt = <1306329>; ++ regulator-max-microvolt = <1306329>; ++ lltc,fb-voltage-divider = <100000 158000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ ldo2_reg: ldo2 { ++ regulator-min-microvolt = <704123>; ++ regulator-max-microvolt = <1456806>; ++ lltc,fb-voltage-divider = <180000 191000>; ++ regulator-ramp-delay = <7000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ ldo3_reg: ldo3 { ++ regulator-min-microvolt = <2800000>; ++ regulator-max-microvolt = <2800000>; ++ regulator-boot-on; ++ }; ++ ++ ldo4_reg: ldo4 { ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <3200000>; ++ }; ++ }; ++ }; ++}; +diff -Nru linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory.dts linux-4.4/arch/arm/boot/dts/imx53-usbarmory.dts +--- linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory.dts 1969-12-31 18:00:00.000000000 -0600 ++++ linux-4.4/arch/arm/boot/dts/imx53-usbarmory.dts 2016-02-04 08:31:38.730794858 -0600 +@@ -0,0 +1,18 @@ ++/* ++ * USB armory MkI device mode device tree file ++ * https://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano <andrej@inversepath.com> ++ * ++ * Licensed under GPLv2 ++ */ ++ ++/dts-v1/; ++ ++#include "imx53-usbarmory-common.dtsi" ++ ++&usbotg { ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; +diff -Nru linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-gpio.dts linux-4.4/arch/arm/boot/dts/imx53-usbarmory-gpio.dts +--- linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-gpio.dts 1969-12-31 18:00:00.000000000 -0600 ++++ linux-4.4/arch/arm/boot/dts/imx53-usbarmory-gpio.dts 2016-02-04 08:31:38.730794858 -0600 +@@ -0,0 +1,26 @@ ++/* ++ * USB armory MkI device mode device tree file ++ * https://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano <andrej@inversepath.com> ++ * ++ * Licensed under GPLv2 ++ */ ++ ++/dts-v1/; ++ ++#include "imx53-usbarmory-common.dtsi" ++ ++&usbotg { ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; ++ ++&iomuxc { ++ pinctrl-0 = <&pinctrl_gpio5>; ++}; ++ ++&uart1 { ++ status = "disabled"; ++}; +diff -Nru linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-host.dts linux-4.4/arch/arm/boot/dts/imx53-usbarmory-host.dts +--- linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-host.dts 1969-12-31 18:00:00.000000000 -0600 ++++ linux-4.4/arch/arm/boot/dts/imx53-usbarmory-host.dts 2016-02-04 08:31:38.730794858 -0600 +@@ -0,0 +1,18 @@ ++/* ++ * USB armory MkI host mode device tree file ++ * https://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano <andrej@inversepath.com> ++ * ++ * Licensed under GPLv2 ++ */ ++ ++/dts-v1/; ++ ++#include "imx53-usbarmory-common.dtsi" ++ ++&usbotg { ++ dr_mode = "host"; ++ status = "okay"; ++}; +diff -Nru linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-i2c.dts linux-4.4/arch/arm/boot/dts/imx53-usbarmory-i2c.dts +--- linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-i2c.dts 1969-12-31 18:00:00.000000000 -0600 ++++ linux-4.4/arch/arm/boot/dts/imx53-usbarmory-i2c.dts 2016-02-04 08:31:38.730794858 -0600 +@@ -0,0 +1,32 @@ ++/* ++ * USB armory MkI device mode device tree file ++ * https://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano <andrej@inversepath.com> ++ * ++ * Licensed under GPLv2 ++ */ ++ ++/dts-v1/; ++ ++#include "imx53-usbarmory-common.dtsi" ++ ++&usbotg { ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; ++ ++&uart1 { ++ status = "disabled"; ++}; ++ ++&iomuxc { ++ pinctrl-0 = <&pinctrl_i2c1_pinheader>; ++}; ++ ++&i2c1 { ++ ltc3589: pmic@34 { ++ status = "disabled"; ++ }; ++}; +diff -Nru linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-spi.dts linux-4.4/arch/arm/boot/dts/imx53-usbarmory-spi.dts +--- linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-spi.dts 1969-12-31 18:00:00.000000000 -0600 ++++ linux-4.4/arch/arm/boot/dts/imx53-usbarmory-spi.dts 2016-02-04 08:31:38.730794858 -0600 +@@ -0,0 +1,45 @@ ++/* ++ * USB armory MkI device mode device tree file ++ * https://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano <andrej@inversepath.com> ++ * ++ * Licensed under GPLv2 ++ */ ++ ++/dts-v1/; ++ ++#include "imx53-usbarmory-common.dtsi" ++ ++&usbotg { ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; ++ ++&uart1 { ++ status = "disabled"; ++}; ++ ++&iomuxc { ++ pinctrl-0 = <&pinctrl_ecspi2>; ++}; ++ ++&ecspi2 { ++ fsl,spi-num-chipselects = <2>; ++ cs-gpios = <&gpio5 29 0>, <&gpio5 30 0>; ++ status = "okay"; ++ ++ flash: m25p40@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "st,m25p40", "st,m25p"; ++ spi-max-frequency = <20000000>; ++ reg = <0>; ++ ++ partition@0 { ++ label = "test-partition"; ++ reg = <0x0 0x80000>; ++ }; ++ }; ++}; +diff -Nru linux-4.4-orig/arch/arm/boot/dts/Makefile linux-4.4/arch/arm/boot/dts/Makefile +--- linux-4.4-orig/arch/arm/boot/dts/Makefile 2016-02-04 13:29:20.880919101 -0600 ++++ linux-4.4/arch/arm/boot/dts/Makefile 2016-02-04 13:27:10.733849955 -0600 +@@ -278,6 +278,10 @@ + imx53-smd.dtb \ + imx53-tx53-x03x.dtb \ + imx53-tx53-x13x.dtb \ ++ imx53-usbarmory.dtb \ ++ imx53-usbarmory-host.dtb \ ++ imx53-usbarmory-i2c.dtb \ ++ imx53-usbarmory-gpio.dtb \ + imx53-voipac-bsb.dtb + dtb-$(CONFIG_SOC_IMX6Q) += \ + imx6dl-apf6dev.dtb \ |