diff options
Diffstat (limited to 'src/go/collectors/go.d.plugin/modules/adaptecraid/testdata/getconfig-pd-current.txt')
-rw-r--r-- | src/go/collectors/go.d.plugin/modules/adaptecraid/testdata/getconfig-pd-current.txt | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/src/go/collectors/go.d.plugin/modules/adaptecraid/testdata/getconfig-pd-current.txt b/src/go/collectors/go.d.plugin/modules/adaptecraid/testdata/getconfig-pd-current.txt new file mode 100644 index 0000000000..62beff83cd --- /dev/null +++ b/src/go/collectors/go.d.plugin/modules/adaptecraid/testdata/getconfig-pd-current.txt @@ -0,0 +1,216 @@ +Controllers found: 1 +---------------------------------------------------------------------- +Physical Device information +---------------------------------------------------------------------- + Device #0 + Device is a Hard drive + State : Online + Block Size : 512 Bytes + Supported : Yes + Transfer Speed : SAS 6.0 Gb/s + Reported Channel,Device(T:L) : 0,1(1:0) + Reported Location : Connector 0, Device 1 + Vendor : NETAPP + Model : X422_HCOBE600A10 + Firmware : NA00 + Reserved Size : 956312 KB + Used Size : 571392 MB + Unused Size : 64 KB + Total Size : 572325 MB + Write Cache : Enabled (write-back) + FRU : None + S.M.A.R.T. : No + S.M.A.R.T. warnings : 0 + Power State : Full rpm + Supported Power States : Full rpm,Powered off + SSD : No + Temperature : Not Supported + ---------------------------------------------------------------- + Device Phy Information + ---------------------------------------------------------------- + Phy #0 + PHY Identifier : 0 + SAS Address : 5000 + Attached PHY Identifier : 2 + Attached SAS Address : 5000 + Phy #1 + PHY Identifier : 1 + SAS Address : 5000 + + Device #1 + Device is a Hard drive + State : Online + Block Size : 512 Bytes + Supported : Yes + Transfer Speed : SAS 6.0 Gb/s + Reported Channel,Device(T:L) : 0,2(2:0) + Reported Location : Connector 0, Device 2 + Vendor : NETAPP + Model : X422_HCOBE600A10 + Firmware : NA02 + Reserved Size : 956312 KB + Used Size : 571392 MB + Unused Size : 64 KB + Total Size : 572325 MB + Write Cache : Enabled (write-back) + FRU : None + S.M.A.R.T. : No + S.M.A.R.T. warnings : 0 + Power State : Full rpm + Supported Power States : Full rpm,Powered off + SSD : No + Temperature : Not Supported + ---------------------------------------------------------------- + Device Phy Information + ---------------------------------------------------------------- + Phy #0 + PHY Identifier : 0 + SAS Address : 5000 + Attached PHY Identifier : 1 + Attached SAS Address : 5000 + Phy #1 + PHY Identifier : 1 + SAS Address : 5000 + + Device #2 + Device is a Hard drive + State : Online + Block Size : 512 Bytes + Supported : Yes + Transfer Speed : SAS 6.0 Gb/s + Reported Channel,Device(T:L) : 0,4(4:0) + Reported Location : Connector 1, Device 0 + Vendor : NETAPP + Model : X422_HCOBD600A10 + Firmware : NA05 + Reserved Size : 956312 KB + Used Size : 571392 MB + Unused Size : 64 KB + Total Size : 572325 MB + Write Cache : Enabled (write-back) + FRU : None + S.M.A.R.T. : No + S.M.A.R.T. warnings : 0 + Power State : Full rpm + Supported Power States : Full rpm,Powered off + SSD : No + Temperature : Not Supported + ---------------------------------------------------------------- + Device Phy Information + ---------------------------------------------------------------- + Phy #0 + PHY Identifier : 0 + SAS Address : 5000 + Attached PHY Identifier : 7 + Attached SAS Address : 5000 + Phy #1 + PHY Identifier : 1 + SAS Address : 5000 + + Device #3 + Device is a Hard drive + State : Online + Block Size : 512 Bytes + Supported : Yes + Transfer Speed : SAS 6.0 Gb/s + Reported Channel,Device(T:L) : 0,5(5:0) + Reported Location : Connector 1, Device 1 + Vendor : NETAPP + Model : X422_HCOBD600A10 + Firmware : NA05 + Reserved Size : 956312 KB + Used Size : 571392 MB + Unused Size : 64 KB + Total Size : 572325 MB + Write Cache : Enabled (write-back) + FRU : None + S.M.A.R.T. : No + S.M.A.R.T. warnings : 0 + Power State : Full rpm + Supported Power States : Full rpm,Powered off + SSD : No + Temperature : Not Supported + ---------------------------------------------------------------- + Device Phy Information + ---------------------------------------------------------------- + Phy #0 + PHY Identifier : 0 + SAS Address : 5000 + Attached PHY Identifier : 6 + Attached SAS Address : 5000 + Phy #1 + PHY Identifier : 1 + SAS Address : 5000 + + Device #4 + Device is a Hard drive + State : Online + Block Size : 512 Bytes + Supported : Yes + Transfer Speed : SAS 6.0 Gb/s + Reported Channel,Device(T:L) : 0,6(6:0) + Reported Location : Connector 1, Device 2 + Vendor : NETAPP + Model : X422_HCOBD600A10 + Firmware : NA05 + Reserved Size : 956312 KB + Used Size : 571392 MB + Unused Size : 64 KB + Total Size : 572325 MB + Write Cache : Enabled (write-back) + FRU : None + S.M.A.R.T. : No + S.M.A.R.T. warnings : 0 + Power State : Full rpm + Supported Power States : Full rpm,Powered off + SSD : No + Temperature : Not Supported + ---------------------------------------------------------------- + Device Phy Information + ---------------------------------------------------------------- + Phy #0 + PHY Identifier : 0 + SAS Address : 5000 + Attached PHY Identifier : 5 + Attached SAS Address : 5000 + Phy #1 + PHY Identifier : 1 + SAS Address : 5000 + + Device #5 + Device is a Hard drive + State : Online + Block Size : 512 Bytes + Supported : Yes + Transfer Speed : SAS 6.0 Gb/s + Reported Channel,Device(T:L) : 0,7(7:0) + Reported Location : Connector 1, Device 3 + Vendor : NETAPP + Model : X422_HCOBD600A10 + Firmware : NA05 + Reserved Size : 956312 KB + Used Size : 571392 MB + Unused Size : 64 KB + Total Size : 572325 MB + Write Cache : Enabled (write-back) + FRU : None + S.M.A.R.T. : No + S.M.A.R.T. warnings : 0 + Power State : Full rpm + Supported Power States : Full rpm,Powered off + SSD : No + Temperature : Not Supported + ---------------------------------------------------------------- + Device Phy Information + ---------------------------------------------------------------- + Phy #0 + PHY Identifier : 0 + SAS Address : 5000 + Attached PHY Identifier : 4 + Attached SAS Address : 5000 + PHY Identifier : 1 + SAS Address : 5000 + + + +Command completed successfully. |