diff options
Diffstat (limited to 'collectors/perf.plugin/integrations/cpu_performance.md')
-rw-r--r-- | collectors/perf.plugin/integrations/cpu_performance.md | 187 |
1 files changed, 187 insertions, 0 deletions
diff --git a/collectors/perf.plugin/integrations/cpu_performance.md b/collectors/perf.plugin/integrations/cpu_performance.md new file mode 100644 index 0000000000..9aa0857489 --- /dev/null +++ b/collectors/perf.plugin/integrations/cpu_performance.md @@ -0,0 +1,187 @@ +<!--startmeta +custom_edit_url: "https://github.com/netdata/netdata/edit/master/collectors/perf.plugin/README.md" +meta_yaml: "https://github.com/netdata/netdata/edit/master/collectors/perf.plugin/metadata.yaml" +sidebar_label: "CPU performance" +learn_status: "Published" +learn_rel_path: "Data Collection/Linux Systems" +message: "DO NOT EDIT THIS FILE DIRECTLY, IT IS GENERATED BY THE COLLECTOR'S metadata.yaml FILE" +endmeta--> + +# CPU performance + +Plugin: perf.plugin +Module: perf.plugin + +<img src="https://img.shields.io/badge/maintained%20by-Netdata-%2300ab44" /> + +## Overview + +This collector monitors CPU performance metrics about cycles, instructions, migrations, cache operations and more. + +It uses syscall (2) to open a file descriptior to monitor the perf events. + +This collector is only supported on the following platforms: + +- Linux + +This collector supports collecting metrics from multiple instances of this integration, including remote instances. + +It needs setuid to use necessary syscall to collect perf events. Netada sets the permission during installation time. + +### Default Behavior + +#### Auto-Detection + +This integration doesn't support auto-detection. + +#### Limits + +The default configuration for this integration does not impose any limits on data collection. + +#### Performance Impact + +The default configuration for this integration is not expected to impose a significant performance impact on the system. + + +## Metrics + +Metrics grouped by *scope*. + +The scope defines the instance that the metric belongs to. An instance is uniquely identified by a set of labels. + + + +### Per CPU performance instance + +These metrics refer to the entire monitored application. + +This scope has no labels. + +Metrics: + +| Metric | Dimensions | Unit | +|:------|:----------|:----| +| perf.cpu_cycles | cpu, ref_cpu | cycles/s | +| perf.instructions | instructions | instructions/s | +| perf.instructions_per_cycle | ipc | instructions/cycle | +| perf.branch_instructions | instructions, misses | instructions/s | +| perf.cache | references, misses | operations/s | +| perf.bus_cycles | bus | cycles/s | +| perf.stalled_cycles | frontend, backend | cycles/s | +| perf.migrations | migrations | migrations | +| perf.alignment_faults | faults | faults | +| perf.emulation_faults | faults | faults | +| perf.l1d_cache | read_access, read_misses, write_access, write_misses | events/s | +| perf.l1d_cache_prefetch | prefetches | prefetches/s | +| perf.l1i_cache | read_access, read_misses | events/s | +| perf.ll_cache | read_access, read_misses, write_access, write_misses | events/s | +| perf.dtlb_cache | read_access, read_misses, write_access, write_misses | events/s | +| perf.itlb_cache | read_access, read_misses | events/s | +| perf.pbu_cache | read_access | events/s | + + + +## Alerts + +There are no alerts configured by default for this integration. + + +## Setup + +### Prerequisites + +#### Install perf plugin + +If you are [using our official native DEB/RPM packages](https://github.com/netdata/netdata/blob/master/packaging/installer/UPDATE.md#determine-which-installation-method-you-used), make sure the `netdata-plugin-perf` package is installed. + + +#### Enable the pref plugin + +The plugin is disabled by default because the number of PMUs is usually quite limited and it is not desired to allow Netdata to struggle silently for PMUs, interfering with other performance monitoring software. + +To enable it, use `edit-config` from the Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md), which is typically at `/etc/netdata`, to edit the `netdata.conf` file. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config netdata.conf +``` + +Change the value of the `perf` setting to `yes` in the `[plugins]` section. Save the file and restart the Netdata Agent with `sudo systemctl restart netdata`, or the [appropriate method](https://github.com/netdata/netdata/blob/master/docs/configure/start-stop-restart.md) for your system. + + + +### Configuration + +#### File + +The configuration file name for this integration is `netdata.conf`. +Configuration for this specific integration is located in the `[plugin:perf]` section within that file. + +The file format is a modified INI syntax. The general structure is: + +```toml +[section1] + option 1 = some value + option 2 = some other value + +[section2] + option 3 = some third value +``` +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config netdata.conf +``` +#### Options + +You can get the available options running: + +```bash +/usr/libexec/netdata/plugins.d/perf.plugin --help +```` + + +<details><summary>Config options</summary> + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| update every | Data collection frequency. | | False | +| command options | Command options that specify charts shown by plugin. `cycles`, `instructions`, `branch`, `cache`, `bus`, `stalled`, `migrations`, `alignment`, `emulation`, `L1D`, `L1D-prefetch`, `L1I`, `LL`, `DTLB`, `ITLB`, `PBU`. | | True | + +</details> + +#### Examples + +##### All metrics + +Monitor all metrics available. + +```yaml +[plugin:perf] + command options = all + +``` +##### CPU cycles + +Monitor CPU cycles. + +<details><summary>Config</summary> + +```yaml +[plugin:perf] + command options = cycles + +``` +</details> + + + +## Troubleshooting + +### Debug Mode + + + + |