diff options
author | Joel Hans <joel@netdata.cloud> | 2019-08-13 08:07:17 -0700 |
---|---|---|
committer | GitHub <noreply@github.com> | 2019-08-13 08:07:17 -0700 |
commit | a726c905bde122d6a03da9866efb51a2e3b526c2 (patch) | |
tree | 7715d332b0eeedbf4e45ea60c698a25c2c30929d /daemon | |
parent | dc38b1d15df2d07f65c0f3c8f8f944fbcc89a574 (diff) |
Change "netdata" to "Netdata" in all docs (#6621)
* First pass of changing netdata to Netdata
* Second pass of netdata -> Netdata
* Starting work on netdata with no whitespace after
* Pass for netdata with no whitespace at the end
* Pass for netdata with no whitespace at the front
Diffstat (limited to 'daemon')
-rw-r--r-- | daemon/README.md | 123 | ||||
-rw-r--r-- | daemon/config/README.md | 38 |
2 files changed, 80 insertions, 81 deletions
diff --git a/daemon/README.md b/daemon/README.md index 62cc8c3b2b..26d19b66de 100644 --- a/daemon/README.md +++ b/daemon/README.md @@ -2,10 +2,10 @@ ## Starting netdata -- You can start netdata by executing it with `/usr/sbin/netdata` (the installer will also start it). +- You can start Netdata by executing it with `/usr/sbin/netdata` (the installer will also start it). -- You can stop netdata by killing it with `killall netdata`. - You can stop and start netdata at any point. Netdata saves on exit its round robbin +- You can stop Netdata by killing it with `killall netdata`. + You can stop and start Netdata at any point. Netdata saves on exit its round robbin database to `/var/cache/netdata` so that it will continue from where it stopped the last time. Access to the web site, for all graphs, is by default on port `19999`, so go to: @@ -16,7 +16,7 @@ Access to the web site, for all graphs, is by default on port `19999`, so go to: You can get the running config file at any time, by accessing `http://127.0.0.1:19999/netdata.conf`. -### Starting netdata at boot +### Starting Netdata at boot In the `system` directory you can find scripts and configurations for the various distros. @@ -27,7 +27,7 @@ The installer already installs `netdata.service` if it detects a systemd system. To install `netdata.service` by hand, run: ```sh -# stop netdata +# stop Netdata killall netdata # copy netdata.service to systemd @@ -36,10 +36,10 @@ cp system/netdata.service /etc/systemd/system/ # let systemd know there is a new service systemctl daemon-reload -# enable netdata at boot +# enable Netdata at boot systemctl enable netdata -# start netdata +# start Netdata systemctl start netdata ``` @@ -48,7 +48,7 @@ systemctl start netdata In the system directory you can find `netdata-lsb`. Copy it to the proper place according to your distribution documentation. For Ubuntu, this can be done via running the following commands as root. ```sh -# copy the netdata startup file to /etc/init.d +# copy the Netdata startup file to /etc/init.d cp system/netdata-lsb /etc/init.d/netdata # make sure it is executable @@ -67,7 +67,7 @@ In the `system` directory you can find `netdata-openrc`. Copy it to the proper p For older versions of RHEL/CentOS that don't have systemd, an init script is included in the system directory. This can be installed by running the following commands as root. ```sh -# copy the netdata startup file to /etc/init.d +# copy the Netdata startup file to /etc/init.d cp system/netdata-init-d /etc/init.d/netdata # make sure it is executable @@ -81,7 +81,7 @@ _There have been some recent work on the init script, see PR https://github.com/ #### other systems -You can start netdata by running it from `/etc/rc.local` or equivalent. +You can start Netdata by running it from `/etc/rc.local` or equivalent. ## Command line options @@ -97,7 +97,7 @@ netdata -h The program will print the supported command line parameters. -The command line options of the netdata 1.10.0 version are the following: +The command line options of the Netdata 1.10.0 version are the following: ``` ^ @@ -182,7 +182,7 @@ The command line options of the netdata 1.10.0 version are the following: ## Log files -netdata uses 3 log files: +Netdata uses 3 log files: 1. `error.log` 2. `access.log` @@ -190,18 +190,18 @@ netdata uses 3 log files: Any of them can be disabled by setting it to `/dev/null` or `none` in `netdata.conf`. By default `error.log` and `access.log` are enabled. `debug.log` is only enabled if -debugging/tracing is also enabled (netdata needs to be compiled with debugging enabled). +debugging/tracing is also enabled (Netdata needs to be compiled with debugging enabled). Log files are stored in `/var/log/netdata/` by default. #### error.log -The `error.log` is the `stderr` of the netdata daemon and all external plugins run by netdata. +The `error.log` is the `stderr` of the `netdata` daemon and all external plugins run by netdata. -So if any process, in the netdata process tree, writes anything to its standard error, +So if any process, in the Netdata process tree, writes anything to its standard error, it will appear in `error.log`. -For most netdata programs (including standard external plugins shipped by netdata), the +For most Netdata programs (including standard external plugins shipped by netdata), the following lines may appear: tag|description @@ -213,7 +213,7 @@ tag|description So, when auto-detection of data collection fail, `ERROR` lines are logged and the relevant modules are disabled, but the program continues to run. -When a netdata program cannot run at all, a `FATAL` line is logged. +When a Netdata program cannot run at all, a `FATAL` line is logged. #### access.log @@ -231,7 +231,7 @@ where: - `PERCENT_COMPRESSION` is the percentage of traffic saved due to compression. - `PREP_TIME` is the time in milliseconds needed to prepared the response. - `SENT_TIME` is the time in milliseconds needed to sent the response to the client. - - `TOTAL_TIME` is the total time the request was inside netdata (from the first byte of the request to the last byte of the response). + - `TOTAL_TIME` is the total time the request was inside Netdata (from the first byte of the request to the last byte of the response). - `ACTION` can be `filecopy`, `options` (used in CORS), `data` (API call). @@ -242,17 +242,17 @@ See [debugging](#debugging). ## OOM Score -netdata runs with `OOMScore = 1000`. This means netdata will be the first to be killed when your +Netdata runs with `OOMScore = 1000`. This means Netdata will be the first to be killed when your server runs out of memory. -You can set netdata OOMScore in `netdata.conf`, like this: +You can set Netdata OOMScore in `netdata.conf`, like this: ``` [global] OOM score = 1000 ``` -netdata logs its OOM score when it starts: +Netdata logs its OOM score when it starts: ```sh # grep OOM /var/log/netdata/error.log @@ -261,16 +261,16 @@ netdata logs its OOM score when it starts: #### OOM score and systemd -netdata will not be able to lower its OOM Score below zero, when it is started as the `netdata` +Netdata will not be able to lower its OOM Score below zero, when it is started as the `netdata` user (systemd case). -To allow netdata control its OOM Score in such cases, you will need to edit +To allow Netdata control its OOM Score in such cases, you will need to edit `netdata.service` and set: ``` [Service] -# The minimum netdata Out-Of-Memory (OOM) score. -# netdata (via [global].OOM score in netdata.conf) can only increase the value set here. +# The minimum Netdata Out-Of-Memory (OOM) score. +# Netdata (via [global].OOM score in netdata.conf) can only increase the value set here. # To decrease it, set the minimum here and set the same or a higher value in netdata.conf. # Valid values: -1000 (never kill netdata) to 1000 (always kill netdata). OOMScoreAdjust=-1000 @@ -278,7 +278,7 @@ OOMScoreAdjust=-1000 Run `systemctl daemon-reload` to reload these changes. -The above, sets and OOMScore for netdata to `-1000`, so that netdata can increase it via +The above, sets and OOMScore for Netdata to `-1000`, so that Netdata can increase it via `netdata.conf`. If you want to control it entirely via systemd, you can set in `netdata.conf`: @@ -293,9 +293,9 @@ Using the above, whatever OOM Score you have set at `netdata.service` will be ma ## Netdata process scheduling policy -By default netdata runs with the `idle` process scheduling policy, so that it uses CPU resources, only when there is idle CPU to spare. On very busy servers (or weak servers), this can lead to gaps on the charts. +By default Netdata runs with the `idle` process scheduling policy, so that it uses CPU resources, only when there is idle CPU to spare. On very busy servers (or weak servers), this can lead to gaps on the charts. -You can set netdata scheduling policy in `netdata.conf`, like this: +You can set Netdata scheduling policy in `netdata.conf`, like this: ``` [global] @@ -306,7 +306,7 @@ You can use the following: policy|description :-----:|:-------- -`idle`|use CPU only when there is spare - this is lower than nice 19 - it is the default for netdata and it is so low that netdata will run in "slow motion" under extreme system load, resulting in short (1-2 seconds) gaps at the charts. +`idle`|use CPU only when there is spare - this is lower than nice 19 - it is the default for Netdata and it is so low that Netdata will run in "slow motion" under extreme system load, resulting in short (1-2 seconds) gaps at the charts. `other`<br/>or<br/>`nice`|this is the default policy for all processes under Linux. It provides dynamic priorities based on the `nice` level of each process. Check below for setting this `nice` level for netdata. `batch`|This policy is similar to `other` in that it schedules the thread according to its dynamic priority (based on the `nice` value). The difference is that this policy will cause the scheduler to always assume that the thread is CPU-intensive. Consequently, the scheduler will apply a small scheduling penalty with respect to wake-up behavior, so that this thread is mildly disfavored in scheduling decisions. `fifo`|`fifo` can be used only with static priorities higher than 0, which means that when a `fifo` threads becomes runnable, it will always immediately preempt any currently running `other`, `batch`, or `idle` thread. `fifo` is a simple scheduling algorithm without time slicing. @@ -337,30 +337,30 @@ When the policy is set to `other`, `nice`, or `batch`, the following will appear ## scheduling settings and systemd -netdata will not be able to set its scheduling policy and priority to more important values when it is started as the `netdata` user (systemd case). +Netdata will not be able to set its scheduling policy and priority to more important values when it is started as the `netdata` user (systemd case). You can set these settings at `/etc/systemd/system/netdata.service`: ``` [Service] -# By default netdata switches to scheduling policy idle, which makes it use CPU, only +# By default Netdata switches to scheduling policy idle, which makes it use CPU, only # when there is spare available. # Valid policies: other (the system default) | batch | idle | fifo | rr #CPUSchedulingPolicy=other -# This sets the maximum scheduling priority netdata can set (for policies: rr and fifo). -# netdata (via [global].process scheduling priority in netdata.conf) can only lower this value. +# This sets the maximum scheduling priority Netdata can set (for policies: rr and fifo). +# Netdata (via [global].process scheduling priority in netdata.conf) can only lower this value. # Priority gets values 1 (lowest) to 99 (highest). #CPUSchedulingPriority=1 # For scheduling policy 'other' and 'batch', this sets the lowest niceness of netdata. -# netdata (via [global].process nice level in netdata.conf) can only increase the value set here. +# Netdata (via [global].process nice level in netdata.conf) can only increase the value set here. #Nice=0 ``` Run `systemctl daemon-reload` to reload these changes. -Now, tell netdata to keep these settings, as set by systemd, by editing `netdata.conf` and setting: +Now, tell Netdata to keep these settings, as set by systemd, by editing `netdata.conf` and setting: ``` [global] @@ -370,9 +370,9 @@ Now, tell netdata to keep these settings, as set by systemd, by editing `netdata Using the above, whatever scheduling settings you have set at `netdata.service` will be maintained by netdata. -#### Example 1: netdata with nice -1 on non-systemd systems +#### Example 1: Netdata with nice -1 on non-systemd systems -On a system that is not based on systemd, to make netdata run with nice level -1 (a little bit higher to the default for all programs), edit netdata.conf and set: +On a system that is not based on systemd, to make Netdata run with nice level -1 (a little bit higher to the default for all programs), edit `netdata.conf` and set: ``` [global] @@ -387,9 +387,9 @@ sudo service netdata restart ``` -#### Example 2: netdata with nice -1 on systemd systems +#### Example 2: Netdata with nice -1 on systemd systems -On a system that is based on systemd, to make netdata run with nice level -1 (a little bit higher to the default for all programs), edit netdata.conf and set: +On a system that is based on systemd, to make Netdata run with nice level -1 (a little bit higher to the default for all programs), edit `netdata.conf` and set: ``` [global] @@ -415,9 +415,9 @@ sudo systemctl restart netdata You may notice that netdata's virtual memory size, as reported by `ps` or `/proc/pid/status` (or even netdata's applications virtual memory chart) is unrealistically high. -For example, it may be reported to be 150+MB, even if the resident memory size is just 25MB. Similar values may be reported for netdata plugins too. +For example, it may be reported to be 150+MB, even if the resident memory size is just 25MB. Similar values may be reported for Netdata plugins too. -Check this for example: A netdata installation with default settings on Ubuntu 16.04LTS. The top chart is **real memory used**, while the bottom one is **virtual memory**: +Check this for example: A Netdata installation with default settings on Ubuntu 16.04LTS. The top chart is **real memory used**, while the bottom one is **virtual memory**: ![image](https://cloud.githubusercontent.com/assets/2662304/19013772/5eb7173e-87e3-11e6-8f2b-a2ccfeb06faf.png) @@ -431,19 +431,18 @@ number of threads running. The system does this for speed. Having a separate memory arena for each thread, allows the threads to run in parallel in multi-core systems, without any locks between them. -This behaviour is system specific. For example, the chart above when running netdata on alpine -linux (that uses **musl** instead of **glibc**) is this: +This behaviour is system specific. For example, the chart above when running Netdata on Alpine Linux (that uses **musl** instead of **glibc**) is this: ![image](https://cloud.githubusercontent.com/assets/2662304/19013807/7cf5878e-87e4-11e6-9651-082e68701eab.png) **Can we do anything to lower it?** -Since netdata already uses minimal memory allocations while it runs (i.e. it adapts its memory on start, so that while repeatedly collects data it does not do memory allocations), it already instructs the system memory allocator to minimize the memory arenas for each thread. We have also added [2 configuration options](https://github.com/netdata/netdata/blob/5645b1ee35248d94e6931b64a8688f7f0d865ec6/src/main.c#L410-L418) +Since Netdata already uses minimal memory allocations while it runs (i.e. it adapts its memory on start, so that while repeatedly collects data it does not do memory allocations), it already instructs the system memory allocator to minimize the memory arenas for each thread. We have also added [2 configuration options](https://github.com/netdata/netdata/blob/5645b1ee35248d94e6931b64a8688f7f0d865ec6/src/main.c#L410-L418) to allow you tweak these settings: `glibc malloc arena max for plugins` and `glibc malloc arena max for netdata`. However, even if we instructed the memory allocator to use just one arena, it seems it allocates an arena per thread. -netdata also supports `jemalloc` and `tcmalloc`, however both behave exactly the same to the glibc memory allocator in this aspect. +Netdata also supports `jemalloc` and `tcmalloc`, however both behave exactly the same to the glibc memory allocator in this aspect. **Is this a problem?** @@ -452,53 +451,53 @@ No, it is not. Linux reserves real memory (physical RAM) in pages (on x86 machines pages are 4KB each). So even if the system memory allocator is allocating huge amounts of virtual memory, only the 4KB pages that are actually used are reserving physical RAM. The **real memory** chart -on netdata application section, shows the amount of physical memory these pages occupy(it +on Netdata application section, shows the amount of physical memory these pages occupy(it accounts the whole pages, even if parts of them are actually used). ## Debugging -When you compile netdata with debugging: +When you compile Netdata with debugging: -1. compiler optimizations for your CPU are disabled (netdata will run somewhat slower) +1. compiler optimizations for your CPU are disabled (Netdata will run somewhat slower) -2. a lot of code is added all over netdata, to log debug messages to `/var/log/netdata/debug.log`. However, nothing is printed by default. netdata allows you to select which sections of netdata you want to trace. Tracing is activated via the config option `debug flags`. It accepts a hex number, to enable or disable specific sections. You can find the options supported at [log.h](../libnetdata/log/log.h). They are the `D_*` defines. The value `0xffffffffffffffff` will enable all possible debug flags. +2. a lot of code is added all over netdata, to log debug messages to `/var/log/netdata/debug.log`. However, nothing is printed by default. Netdata allows you to select which sections of Netdata you want to trace. Tracing is activated via the config option `debug flags`. It accepts a hex number, to enable or disable specific sections. You can find the options supported at [log.h](../libnetdata/log/log.h). They are the `D_*` defines. The value `0xffffffffffffffff` will enable all possible debug flags. -Once netdata is compiled with debugging and tracing is enabled for a few sections, the file `/var/log/netdata/debug.log` will contain the messages. +Once Netdata is compiled with debugging and tracing is enabled for a few sections, the file `/var/log/netdata/debug.log` will contain the messages. > Do not forget to disable tracing (`debug flags = 0`) when you are done tracing. The file `debug.log` can grow too fast. -#### compiling netdata with debugging +#### compiling Netdata with debugging -To compile netdata with debugging, use this: +To compile Netdata with debugging, use this: ```sh -# step into the netdata source directory +# step into the Netdata source directory cd /usr/src/netdata.git # run the installer with debugging enabled CFLAGS="-O1 -ggdb -DNETDATA_INTERNAL_CHECKS=1" ./netdata-installer.sh ``` -The above will compile and install netdata with debugging info embedded. You can now use `debug flags` to set the section(s) you need to trace. +The above will compile and install Netdata with debugging info embedded. You can now use `debug flags` to set the section(s) you need to trace. #### debugging crashes -We have made the most to make netdata crash free. If however, netdata crashes on your system, it would be very helpful to provide stack traces of the crash. Without them, is will be almost impossible to find the issue (the code base is quite large to find such an issue by just objerving it). +We have made the most to make Netdata crash free. If however, Netdata crashes on your system, it would be very helpful to provide stack traces of the crash. Without them, is will be almost impossible to find the issue (the code base is quite large to find such an issue by just objerving it). -To provide stack traces, **you need to have netdata compiled with debugging**. There is no need to enable any tracing (`debug flags`). +To provide stack traces, **you need to have Netdata compiled with debugging**. There is no need to enable any tracing (`debug flags`). Then you need to be in one of the following 2 cases: -1. netdata crashes and you have a core dump +1. Netdata crashes and you have a core dump 2. you can reproduce the crash If you are not on these cases, you need to find a way to be (i.e. if your system does not produce core dumps, check your distro documentation to enable them). -#### netdata crashes and you have a core dump +#### Netdata crashes and you have a core dump -> you need to have netdata compiled with debugging info for this to work (check above) +> you need to have Netdata compiled with debugging info for this to work (check above) Run the following command and post the output on a github issue. @@ -506,9 +505,9 @@ Run the following command and post the output on a github issue. gdb $(which netdata) /path/to/core/dump ``` -#### you can reproduce a netdata crash on your system +#### you can reproduce a Netdata crash on your system -> you need to have netdata compiled with debugging info for this to work (check above) +> you need to have Netdata compiled with debugging info for this to work (check above) Install the package `valgrind` and run: @@ -516,7 +515,7 @@ Install the package `valgrind` and run: valgrind $(which netdata) -D ``` -netdata will start and it will be a lot slower. Now reproduce the crash and `valgrind` will dump on your console the stack trace. Open a new github issue and post the output. +Netdata will start and it will be a lot slower. Now reproduce the crash and `valgrind` will dump on your console the stack trace. Open a new github issue and post the output. [![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fdaemon%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)]() diff --git a/daemon/config/README.md b/daemon/config/README.md index c36a5b6db2..207602a4c7 100644 --- a/daemon/config/README.md +++ b/daemon/config/README.md @@ -8,21 +8,21 @@ This config file **is not needed by default**. Netdata works fine out of the box `netdata.conf` has sections stated with `[section]`. You will see the following sections: -1. `[global]` to [configure](#global-section-options) the [netdata daemon](../). +1. `[global]` to [configure](#global-section-options) the [Netdata daemon](../). 2. `[web]` to [configure the web server](../../web/server). 3. `[plugins]` to [configure](#plugins-section-options) which [collectors](../../collectors) to use and PATH settings. 4. `[health]` to [configure](#health-section-options) general settings for [health monitoring](../../health) -5. `[registry]` for the [netdata registry](../../registry). +5. `[registry]` for the [Netdata registry](../../registry). 6. `[backend]` to set up [streaming and replication](../../streaming) options. 7. `[statsd]` for the general settings of the [stats.d.plugin](../../collectors/statsd.plugin). 8. `[plugin:NAME]` sections for each collector plugin, under the comment [Per plugin configuration](#per-plugin-configuration). 9. `[CHART_NAME]` sections for each chart defined, under the comment [Per chart configuration](#per-chart-configuration). -The configuration file is a `name = value` dictionary. Netdata will not complain if you set options unknown to it. When you check the running configuration by accessing the URL `/netdata.conf` on your netdata server, netdata will add a comment on settings it does not currently use. +The configuration file is a `name = value` dictionary. Netdata will not complain if you set options unknown to it. When you check the running configuration by accessing the URL `/netdata.conf` on your Netdata server, Netdata will add a comment on settings it does not currently use. ## Applying changes -After `netdata.conf` has been modified, netdata needs to be restarted for changes to apply: +After `netdata.conf` has been modified, Netdata needs to be restarted for changes to apply: ```bash sudo service netdata restart @@ -42,36 +42,36 @@ Please note that your data history will be lost if you have modified `history` p setting | default | info :------:|:-------:|:---- -process scheduling policy | `keep` | See [netdata process scheduling policy](../#netdata-process-scheduling-policy) +process scheduling policy | `keep` | See [Netdata process scheduling policy](../#netdata-process-scheduling-policy) OOM score | `1000` | See [OOM score](../#oom-score) glibc malloc arena max for plugins | `1` | See [Virtual memory](../#virtual-memory). -glibc malloc arena max for netdata | `1` | See [Virtual memory](../#virtual-memory). -hostname | auto-detected | The hostname of the computer running netdata. -history | `3996` | The number of entries the netdata daemon will by default keep in memory for each chart dimension. This setting can also be configured per chart. Check [Memory Requirements](../../database/#database) for more information. +glibc malloc arena max for Netdata | `1` | See [Virtual memory](../#virtual-memory). +hostname | auto-detected | The hostname of the computer running Netdata. +history | `3996` | The number of entries the `netdata` daemon will by default keep in memory for each chart dimension. This setting can also be configured per chart. Check [Memory Requirements](../../database/#database) for more information. update every | `1` | The frequency in seconds, for data collection. For more information see [Performance](../../docs/Performance.md#performance). config directory | `/etc/netdata` | The directory configuration files are kept. stock config directory | `/usr/lib/netdata/conf.d` | log directory | `/var/log/netdata` | The directory in which the [log files](../#log-files) are kept. web files directory | `/usr/share/netdata/web` | The directory the web static files are kept. -cache directory | `/var/cache/netdata` | The directory the memory database will be stored if and when netdata exits. Netdata will re-read the database when it will start again, to continue from the same point. -lib directory | `/var/lib/netdata` | Contains the alarm log and the netdata instance guid. +cache directory | `/var/cache/netdata` | The directory the memory database will be stored if and when Netdata exits. Netdata will re-read the database when it will start again, to continue from the same point. +lib directory | `/var/lib/netdata` | Contains the alarm log and the Netdata instance guid. home directory | `/var/cache/netdata` | Contains the db files for the collected metrics plugins directory | `"/usr/libexec/netdata/plugins.d" "/etc/netdata/custom-plugins.d"` | The directory plugin programs are kept. This setting supports multiple directories, space separated. If any directory path contains spaces, enclose it in single or double quotes. -memory mode | `save` | When set to `save` netdata will save its round robin database on exit and load it on startup. When set to `map` the cache files will be updated in real time (check `man mmap` - do not set this on systems with heavy load or slow disks - the disks will continuously sync the in-memory database of netdata). When set to `dbengine` it behaves similarly to `map` but with much better disk and memory efficiency, however, with higher overhead. When set to `ram` the round robin database will be temporary and it will be lost when netdata exits. `none` disables the database at this host. This also disables health monitoring (there cannot be health monitoring without a database). host access prefix | | This is used in docker environments where /proc, /sys, etc have to be accessed via another path. You may also have to set SYS_PTRACE capability on the docker for this work. Check [issue 43](https://github.com/netdata/netdata/issues/43). -memory deduplication (ksm) | `yes` | When set to `yes`, netdata will offer its in-memory round robin database to kernel same page merging (KSM) for deduplication. For more information check [Memory Deduplication - Kernel Same Page Merging - KSM](../../database/#ksm) +memory mode | `save` | When set to `save` Netdata will save its round robin database on exit and load it on startup. When set to `map` the cache files will be updated in real time (check `man mmap` - do not set this on systems with heavy load or slow disks - the disks will continuously sync the in-memory database of Netdata). When set to `dbengine` it behaves similarly to `map` but with much better disk and memory efficiency, however, with higher overhead. When set to `ram` the round robin database will be temporary and it will be lost when Netdata exits. `none` disables the database at this host. This also disables health monitoring (there cannot be health monitoring without a database). host access prefix | | This is used in docker environments where /proc, /sys, etc have to be accessed via another path. You may also have to set SYS_PTRACE capability on the docker for this work. Check [issue 43](https://github.com/netdata/netdata/issues/43). +memory deduplication (ksm) | `yes` | When set to `yes`, Netdata will offer its in-memory round robin database to kernel same page merging (KSM) for deduplication. For more information check [Memory Deduplication - Kernel Same Page Merging - KSM](../../database/#ksm) TZ environment variable | `:/etc/localtime` | Where to find the timezone timezone | auto-detected | The timezone retrieved from the environment variable debug flags | `0x0000000000000000` | Bitmap of debug options to enable. For more information check [Tracing Options](../#debugging). debug log | `/var/log/netdata/debug.log` | The filename to save debug information. This file will not be created if debugging is not enabled. You can also set it to `syslog` to send the debug messages to syslog, or `none` to disable this log. For more information check [Tracing Options](../#debugging). -error log | `/var/log/netdata/error.log` | The filename to save error messages for netdata daemon and all plugins (`stderr` is sent here for all netdata programs, including the plugins). You can also set it to `syslog` to send the errors to syslog, or `none` to disable this log. -access log | `/var/log/netdata/access.log` | The filename to save the log of web clients accessing netdata charts. You can also set it to `syslog` to send the access log to syslog, or `none` to disable this log. +error log | `/var/log/netdata/error.log` | The filename to save error messages for Netdata daemon and all plugins (`stderr` is sent here for all Netdata programs, including the plugins). You can also set it to `syslog` to send the errors to syslog, or `none` to disable this log. +access log | `/var/log/netdata/access.log` | The filename to save the log of web clients accessing Netdata charts. You can also set it to `syslog` to send the access log to syslog, or `none` to disable this log. errors flood protection period | `1200` | UNUSED - Length of period (in sec) during which the number of errors should not exceed the `errors to trigger flood protection`. errors to trigger flood protection | `200` | UNUSED - Number of errors written to the log in `errors flood protection period` sec before flood protection is activated. -run as user | `netdata` | The user netdata will run as. +run as user | `netdata` | The user Netdata will run as. pthread stack size | auto-detected | cleanup obsolete charts after seconds | `3600` | See [monitoring ephemeral containers](../../collectors/cgroups.plugin/#monitoring-ephemeral-containers), also sets the timeout for cleaning up obsolete dimensions gap when lost iterations above | `1` | -cleanup orphan hosts after seconds | `3600` | How long to wait until automatically removing from the DB a remote netdata host (slave) that is no longer sending data. +cleanup orphan hosts after seconds | `3600` | How long to wait until automatically removing from the DB a remote Netdata host (slave) that is no longer sending data. delete obsolete charts files | `yes` | See [monitoring ephemeral containers](../../collectors/cgroups.plugin/#monitoring-ephemeral-containers), also affects the deletion of files for obsolete dimensions delete orphan hosts files | `yes` | Set to `no` to disable non-responsive host removal. enable zero metrics | `no` | Set to `yes` to show charts when all their metrics are zero. @@ -90,8 +90,8 @@ setting | default | info :------:|:-------:|:---- PATH environment variable | `auto-detected` | PYTHONPATH environment variable | | Used to set a custom python path -enable running new plugins | `yes` | When set to `yes`, netdata will enable detected plugins, even if they are not configured explicitly. Setting this to `no` will only enable plugins explicitly configirued in this file with a `yes` -check for new plugins every | 60 | The time in seconds to check for new plugins in the plugins directory. This allows having other applications dynamically creating plugins for netdata. +enable running new plugins | `yes` | When set to `yes`, Netdata will enable detected plugins, even if they are not configured explicitly. Setting this to `no` will only enable plugins explicitly configirued in this file with a `yes` +check for new plugins every | 60 | The time in seconds to check for new plugins in the plugins directory. This allows having other applications dynamically creating plugins for Netdata. checks | `no` | This is a debugging plugin for the internal latency ### [health] section options @@ -129,7 +129,7 @@ The configuration options for plugins appear in sections following the pattern ` Most internal plugins will provide additional options. Check [Internal Plugins](../../collectors/) for more information. -Please note, that by default Netdata will enable monitoring metrics for disks, memory, and network only when they are not zero. If they are constantly zero they are ignored. Metrics that will start having values, after netdata is started, will be detected and charts will be automatically added to the dashboard (a refresh of the dashboard is needed for them to appear though). Use `yes` instead of `auto` in plugin configuration sections to enable these charts permanently. You can also set the `enable zero metrics` option to `yes` in the `[global]` section which enables charts with zero metrics for all internal Netdata plugins. +Please note, that by default Netdata will enable monitoring metrics for disks, memory, and network only when they are not zero. If they are constantly zero they are ignored. Metrics that will start having values, after Netdata is started, will be detected and charts will be automatically added to the dashboard (a refresh of the dashboard is needed for them to appear though). Use `yes` instead of `auto` in plugin configuration sections to enable these charts permanently. You can also set the `enable zero metrics` option to `yes` in the `[global]` section which enables charts with zero metrics for all internal Netdata plugins. #### External plugins |