path: root/sound/oss/Kconfig

# drivers/sound/Config.in
#
# 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
# More hacking for modularisation.
#
# Prompt user for primary drivers.
config SOUND_BT878
	tristate "BT878 audio dma"
	depends on SOUND_PRIME!=n && SOUND
	---help---
	  Audio DMA support for bt878 based grabber boards.  As you might have
	  already noticed, bt878 is listed with two functions in /proc/pci.
	  Function 0 does the video stuff (bt848 compatible), function 1 does
	  the same for audio data.  This is a driver for the audio part of
	  the chip.  If you say 'Y' here you get a oss-compatible dsp device
	  where you can record from.  If you want just watch TV you probably
	  don't need this driver as most TV cards handle sound with a short
	  cable from the TV card to your sound card's line-in.

	  To compile this driver as a module, choose M here: the module will
	  be called btaudio.

config SOUND_CMPCI
	tristate "C-Media PCI (CMI8338/8738)"
	depends on SOUND_PRIME!=n && SOUND && PCI
	help
	  Say Y or M if you have a PCI sound card using the CMI8338
	  or the CMI8738 chipset.  Data on these chips are available at
	  <http://www.cmedia.com.tw/>.

	  A userspace utility to control some internal registers of these
	  chips is available at
	  <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.

config SOUND_CMPCI_FM
	bool "Enable legacy FM"
	depends on SOUND_CMPCI && X86
	help
	  Say Y here to enable the legacy FM (frequency-modulation) synthesizer
	  support on a card using the CMI8338 or CMI8378 chipset. Even it is
	  enabled, you need to set fmio as proper value to enable it.
	  Say N here if you don't need this.

config SOUND_CMPCI_MIDI
	bool "Enable legacy MPU-401"
	depends on SOUND_CMPCI && X86
	help
	  Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
	  card using the CMI8338 or CMI8378 chipset. Even it is enabled,
	  you need to set mpuio as proper value to enable it.
	  Say N here if you don't need this.

config SOUND_CMPCI_JOYSTICK
	bool "Enable joystick"
	depends on SOUND_CMPCI && X86
	help
	  Say Y here in order to enable the joystick port on a sound card using
	  the CMI8338 or the CMI8738 chipset.  You need to config the
	  gameport support and set joystick parameter as 1 to use it.
	  Say N here if you don't need this.

config SOUND_EMU10K1
	tristate "Creative SBLive! (EMU10K1)"
	depends on SOUND_PRIME!=n && SOUND && PCI
	---help---
	  Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
	  such as the Creative SBLive!, SB PCI512 or Emu-APS.

	  For more information on this driver and the degree of support for
	  the different card models please check:

	        <http://sourceforge.net/projects/emu10k1/>

	  It is now possible to load dsp microcode patches into the EMU10K1
	  chip.  These patches are used to implement real time sound
	  processing effects which include for example: signal routing,
	  bass/treble control, AC3 passthrough, ...
	  Userspace tools to create new patches and load/unload them can be
	  found in the emu-tools package at the above URL.

config MIDI_EMU10K1
	bool "Creative SBLive! MIDI (EXPERIMENTAL)"
	depends on SOUND_EMU10K1 && EXPERIMENTAL
	help
	  Say Y if you want to be able to use the OSS /dev/sequencer
	  interface.  This code is still experimental.

config SOUND_FUSION
	tristate "Crystal SoundFusion (CS4280/461x)"
	depends on SOUND_PRIME!=n && SOUND
	help
	  This module drives the Crystal SoundFusion devices (CS4280/46xx
	  series) when wired as native sound drivers with AC97 codecs.  If
	  this driver does not work try the CS4232 driver.

config SOUND_CS4281
	tristate "Crystal Sound CS4281"
	depends on SOUND_PRIME!=n && SOUND
	help
	  Picture and feature list at
	  <http://www.pcbroker.com/crystal4281.html>.

config SOUND_BCM_CS4297A
	tristate "Crystal Sound CS4297a (for Swarm)"
	depends on SOUND_PRIME!=n && SIBYTE_SWARM && SOUND
	help
	  The BCM91250A has a Crystal CS4297a on synchronous serial
	  port B (in addition to the DB-9 serial port).  Say Y or M
	  here to enable the sound chip instead of the UART.  Also
	  note that CONFIG_KGDB should not be enabled at the same
	  time, since it also attempts to use this UART port.

config SOUND_ES1370
	tristate "Ensoniq AudioPCI (ES1370)"
	depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
	help
	  Say Y or M if you have a PCI sound card utilizing the Ensoniq
	  ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
	  out if your sound card uses an ES1370 without removing your
	  computer's cover, use lspci -n and look for the PCI ID
	  1274:5000. Since Ensoniq was bought by Creative Labs,
	  Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
	  This driver differs slightly from OSS/Free, so PLEASE READ
	  <file:Documentation/sound/oss/es1370>.

config SOUND_ES1371
	tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
	depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
	help
	  Say Y or M if you have a PCI sound card utilizing the Ensoniq
	  ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
	  your sound card uses an ES1371 without removing your computer's
	  cover, use lspci -n and look for the PCI ID 1274:1371. Since
	  Ensoniq was bought by Creative Labs, Sound Blaster 64/PCI
	  models are either ES1370 or ES1371 based. This driver differs
	  slightly from OSS/Free, so PLEASE READ
	  <file:Documentation/sound/oss/es1371>.

config SOUND_ESSSOLO1
	tristate "ESS Technology Solo1" 
	depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT && PCI
	help
	  Say Y or M if you have a PCI sound card utilizing the ESS Technology
	  Solo1 chip. To find out if your sound card uses a
	  Solo1 chip without removing your computer's cover, use
	  lspci -n and look for the PCI ID 125D:1969. This driver
	  differs slightly from OSS/Free, so PLEASE READ
	  <file:Documentation/sound/oss/solo1>.

config SOUND_MAESTRO
	tristate "ESS Maestro, Maestro2, Maestro2E driver"
	depends on SOUND_PRIME!=n && SOUND && PCI
	help
	  Say Y or M if you have a sound system driven by ESS's Maestro line
	  of PCI sound chips.  These include the Maestro 1, Maestro 2, and
	  Maestro 2E.  See <file:Documentation/sound/oss/Maestro> for more
	  details.

config SOUND_MAESTRO3
	tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
	depends on SOUND_PRIME!=n && SOUND && PCI && EXPERIMENTAL
	help
	  Say Y or M if you have a sound system driven by ESS's Maestro 3
	  PCI sound chip.

config SOUND_ICH
	tristate "Intel ICH (i8xx) audio support"
	depends on SOUND_PRIME!=n && PCI
	help
	  Support for integral audio in Intel's I/O Controller Hub (ICH)
	  chipset, as used on the 810/820/840 motherboards.

config SOUND_HARMONY
	tristate "PA Harmony audio driver"
	depends on GSC_LASI && SOUND_PRIME!=n
	help
	  Say 'Y' or 'M' to include support for Harmony soundchip
	  on HP 712, 715/new and many other GSC based machines.

config SOUND_SONICVIBES
	tristate "S3 SonicVibes"
	depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
	help
	  Say Y or M if you have a PCI sound card utilizing the S3
	  SonicVibes chipset. To find out if your sound card uses a
	  SonicVibes chip without removing your computer's cover, use
	  lspci -n and look for the PCI ID 5333:CA00. This driver
	  differs slightly from OSS/Free, so PLEASE READ
	  <file:Documentation/sound/oss/sonicvibes>.

config SOUND_VWSND
	tristate "SGI Visual Workstation Sound"
	depends on SOUND_PRIME!=n && X86_VISWS && SOUND
	help
	  Say Y or M if you have an SGI Visual Workstation and you want to be
	  able to use its on-board audio.  Read
	  <file:Documentation/sound/oss/vwsnd> for more info on this driver's
	  capabilities.

config SOUND_HAL2
	tristate "SGI HAL2 sound (EXPERIMENTAL)"
	depends on SOUND_PRIME!=n && SOUND && SGI_IP22 && EXPERIMENTAL
	help
	  Say Y or M if you have an SGI Indy system and want to be able to
	  use it's on-board A2 audio system.

config SOUND_IT8172
	tristate