/*
* linux/drivers/video/stifb.c -
* Low level Frame buffer driver for HP workstations with
* STI (standard text interface) video firmware.
*
* Copyright (C) 2001-2004 Helge Deller <deller@gmx.de>
* Portions Copyright (C) 2001 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
*
* Based on:
* - linux/drivers/video/artistfb.c -- Artist frame buffer driver
* Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
* - based on skeletonfb, which was
* Created 28 Dec 1997 by Geert Uytterhoeven
* - HP Xhp cfb-based X11 window driver for XFree86
* (c)Copyright 1992 Hewlett-Packard Co.
*
*
* The following graphics display devices (NGLE family) are supported by this driver:
*
* HPA4070A known as "HCRX", a 1280x1024 color device with 8 planes
* HPA4071A known as "HCRX24", a 1280x1024 color device with 24 planes,
* optionally available with a hardware accelerator as HPA4071A_Z
* HPA1659A known as "CRX", a 1280x1024 color device with 8 planes
* HPA1439A known as "CRX24", a 1280x1024 color device with 24 planes,
* optionally available with a hardware accelerator.
* HPA1924A known as "GRX", a 1280x1024 grayscale device with 8 planes
* HPA2269A known as "Dual CRX", a 1280x1024 color device with 8 planes,
* implements support for two displays on a single graphics card.
* HP710C internal graphics support optionally available on the HP9000s710 SPU,
* supports 1280x1024 color displays with 8 planes.
* HP710G same as HP710C, 1280x1024 grayscale only
* HP710L same as HP710C, 1024x768 color only
* HP712 internal graphics support on HP9000s712 SPU, supports 640x480,
* 1024x768 or 1280x1024 color displays on 8 planes (Artist)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
/* TODO:
* - 1bpp mode is completely untested
* - add support for h/w acceleration
* - add hardware cursor
* - automatically disable double buffering (e.g. on RDI precisionbook laptop)
*/
/* on supported graphic devices you may:
* #define FALLBACK_TO_1BPP to fall back to 1 bpp, or
* #undef FALLBACK_TO_1BPP to reject support for unsupported cards */
#undef FALLBACK_TO_1BPP
#undef DEBUG_STIFB_REGS /* debug sti register accesses */
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include