1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
|
/*
* FB driver for the ILI9320 LCD Controller
*
* Copyright (C) 2013 Noralf Tronnes
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>
#include "fbtft.h"
#define DRVNAME "fb_ili9320"
#define WIDTH 240
#define HEIGHT 320
#define DEFAULT_GAMMA "07 07 6 0 0 0 5 5 4 0\n" \
"07 08 4 7 5 1 2 0 7 7"
static unsigned read_devicecode(struct fbtft_par *par)
{
int ret;
u8 rxbuf[8] = {0, };
write_reg(par, 0x0000);
ret = par->fbtftops.read(par, rxbuf, 4);
return (rxbuf[2] << 8) | rxbuf[3];
}
static int init_display(struct fbtft_par *par)
{
unsigned devcode;
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
par->fbtftops.reset(par);
devcode = read_devicecode(par);
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "Device code: 0x%04X\n",
devcode);
if ((devcode != 0x0000) && (devcode != 0x9320))
dev_warn(par->info->device,
"Unrecognized Device code: 0x%04X (expected 0x9320)\n",
devcode);
/* Initialization sequence from ILI9320 Application Notes */
/* *********** Start Initial Sequence ********* */
write_reg(par, 0x00E5, 0x8000); /* Set the Vcore voltage and this setting is must. */
write_reg(par, 0x0000, 0x0001); /* Start internal OSC. */
write_reg(par, 0x0001, 0x0100); /* set SS and SM bit */
write_reg(par, 0x0002, 0x0700); /* set 1 line inversion */
write_reg(par, 0x0004, 0x0000); /* Resize register */
write_reg(par, 0x0008, 0x0202); /* set the back and front porch */
write_reg(par, 0x0009, 0x0000); /* set non-display area refresh cycle */
write_reg(par, 0x000A, 0x0000); /* FMARK function */
write_reg(par, 0x000C, 0x0000); /* RGB interface setting */
write_reg(par, 0x000D, 0x0000); /* Frame marker Position */
write_reg(par, 0x000F, 0x0000); /* RGB interface polarity */
/* ***********Power On sequence *************** */
write_reg(par, 0x0010, 0x0000); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
write_reg(par, 0x0011, 0x0007); /* DC1[2:0], DC0[2:0], VC[2:0] */
write_reg(par, 0x0012, 0x0000); /* VREG1OUT voltage */
write_reg(par, 0x0013, 0x0000); /* VDV[4:0] for VCOM amplitude */
mdelay(200); /* Dis-charge capacitor power voltage */
write_reg(par, 0x0010, 0x17B0); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
write_reg(par, 0x0011, 0x0031); /* R11h=0x0031 at VCI=3.3V DC1[2:0], DC0[2:0], VC[2:0] */
mdelay(50);
write_reg(par, 0x0012, 0x0138); /* R12h=0x0138 at VCI=3.3V VREG1OUT voltage */
mdelay(50);
write_reg(par, 0x0013, 0x1800); /* R13h=0x1800 at VCI=3.3V VDV[4:0] for VCOM amplitude */
write_reg(par, 0x0029, 0x0008); /* R29h=0x0008 at VCI=3.3V VCM[4:0] for VCOMH */
mdelay(50);
write_reg(par, 0x0020, 0x0000); /* GRAM horizontal Address */
write_reg(par, 0x0021, 0x0000); /* GRAM Vertical Address */
/* ------------------ Set GRAM area --------------- */
write_reg(par, 0x0050, 0x0000); /* Horizontal GRAM Start Address */
write_reg(par, 0x0051, 0x00EF); /* Horizontal GRAM End Address */
write_reg(par, 0x0052, 0x0000); /* Vertical GRAM Start Address */
write_reg(par, 0x0053, 0x013F); /* Vertical GRAM Start Address */
write_reg(par, 0x0060, 0x2700); /* Gate Scan Line */
write_reg(par, 0x0061, 0x0001); /* NDL,VLE, REV */
write_reg(par, 0x006A, 0x0000); /* set scrolling line */
/* -------------- Partial Display Control --------- */
write_reg(par, 0x0080, 0x0000);
write_reg(par, 0x0081, 0x0000);
write_reg(par, 0x0082, 0x0000);
write_reg(par, 0x0083, 0x0000);
write_reg(par, 0x0084, 0x0000);
write_reg(par, 0x0085, 0x0000);
/* -------------- Panel Control ------------------- */
write_reg(par, 0x0090, 0x0010);
write_reg(par, 0x0092, 0x0000);
write_reg(par, 0x0093, 0x0003);
write_reg(par, 0x0095, 0x0110);
write_reg(par, 0x0097, 0x0000);
write_reg(par, 0x0098, 0x0000);
write_reg(par, 0x0007, 0x0173); /* 262K color and display ON */
return 0;
}
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
fbtft_par_dbg(DEBUG_SET_ADDR_WIN, par,
"%s(xs=%d, ys=%d, xe=%d, ye=%d)\n", __func__, xs, ys, xe, ye);
switch (par->info->var.rotate) {
/* R20h = Horizontal GRAM Start Address */
/* R21h = Vertical GRAM Start Address */
case 0:
write_reg(par, 0x0020, xs);
write_reg(par, 0x0021, ys);
break;
case 180:
write_reg(par, 0x0020, WIDTH - 1 - xs);
write_reg(par, 0x0021, HEIGHT - 1 - ys);
break;
case 270:
write_reg(par, 0x0020, WIDTH - 1 - ys);
write_reg(par, 0x0021, xs);
break;
case 90:
write_reg(par, 0x0020, ys);
write_reg(par, 0x0021, HEIGHT - 1 - xs);
break;
}
write_reg(par, 0x0022); /* Write Data to GRAM */
}
static int set_var(struct fbtft_par *par)
{
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
switch (par->info->var.rotate) {
case 0:
write_reg(par, 0x3, (par->bgr << 12) | 0x30);
break;
case 270:
write_reg(par, 0x3, (par->bgr << 12) | 0x28);
break;
case 180:
write_reg(par, 0x3, (par->bgr << 12) | 0x00);
break;
case 90:
write_reg(par, 0x3, (par->bgr << 12) | 0x18);
break;
}
return 0;
}
/*
Gamma string format:
VRP0 VRP1 RP0 RP1 KP0 KP1 KP2 KP3 KP4 KP5
VRN0 VRN1 RN0 RN1 KN0 KN1 KN2 KN3 KN4 KN5
*/
#define CURVE(num, idx) curves[num*par->gamma.num_values + idx]
static int set_gamma(struct fbtft_par *par, unsigned long *curves)
{
unsigned long mask[] = {
0b11111, 0b11111, 0b111, 0b111, 0b111,
0b111, 0b111, 0b111, 0b111, 0b111,
0b11111, 0b11111, 0b111, 0b111, 0b111,
0b111, 0b111, 0b111, 0b111, 0b111 };
int i, j;
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
/* apply mask */
for (i = 0; i < 2; i++)
for (j = 0; j < 10; j++)
CURVE(i, j) &= mask[i*par->gamma.num_values + j];
write_reg(par, 0x0030, CURVE(0, 5) << 8 | CURVE(0, 4));
write_reg(par, 0x0031, CURVE(0, 7) << 8 | CURVE(0, 6));
write_reg(par, 0x0032, CURVE(0, 9) << 8 | CURVE(0, 8));
write_reg(par, 0x0035, CURVE(0, 3) << 8 | CURVE(0, 2));
write_reg(par, 0x0036, CURVE(0, 1) << 8 | CURVE(0, 0));
write_reg(par, 0x0037, CURVE(1, 5) << 8 | CURVE(1, 4));
write_reg(par, 0x0038, CURVE(1, 7) << 8 | CURVE(1, 6));
write_reg(par, 0x0039, CURVE(1, 9) << 8 | CURVE(1, 8));
write_reg(par, 0x003C, CURVE(1, 3) << 8 | CURVE(1, 2));
write_reg(par, 0x003D, CURVE(1, 1) << 8 | CURVE(1, 0));
return 0;
}
#undef CURVE
static struct fbtft_display display = {
.regwidth = 16,
.width = WIDTH,
.height = HEIGHT,
.gamma_num = 2,
.gamma_len = 10,
.gamma = DEFAULT_GAMMA,
.fbtftops = {
.init_display = init_display,
.set_addr_win = set_addr_win,
.se
|