1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
|
/*
* Regulator driver for tps65090 power management chip.
*
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/tps65090.h>
#define MAX_CTRL_READ_TRIES 5
#define MAX_FET_ENABLE_TRIES 1000
#define CTRL_EN_BIT 0 /* Regulator enable bit, active high */
#define CTRL_WT_BIT 2 /* Regulator wait time 0 bit */
#define CTRL_PG_BIT 4 /* Regulator power good bit, 1=good */
#define CTRL_TO_BIT 7 /* Regulator timeout bit, 1=wait */
#define MAX_OVERCURRENT_WAIT 3 /* Overcurrent wait must be <= this */
/**
* struct tps65090_regulator - Per-regulator data for a tps65090 regulator
*
* @dev: Pointer to our device.
* @desc: The struct regulator_desc for the regulator.
* @rdev: The struct regulator_dev for the regulator.
* @overcurrent_wait_valid: True if overcurrent_wait is valid.
* @overcurrent_wait: For FETs, the value to put in the WTFET bitfield.
*/
struct tps65090_regulator {
struct device *dev;
struct regulator_desc *desc;
struct regulator_dev *rdev;
bool overcurrent_wait_valid;
int overcurrent_wait;
};
static struct regulator_ops tps65090_ext_control_ops = {
};
/**
* tps65090_reg_set_overcurrent_wait - Setup overcurrent wait
*
* This will set the overcurrent wait time based on what's in the regulator
* info.
*
* @ri: Overall regulator data
* @rdev: Regulator device
*
* Return: 0 if no error, non-zero if there was an error writing the register.
*/
static int tps65090_reg_set_overcurrent_wait(struct tps65090_regulator *ri,
struct regulator_dev *rdev)
{
int ret;
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
MAX_OVERCURRENT_WAIT << CTRL_WT_BIT,
ri->overcurrent_wait << CTRL_WT_BIT);
if (ret) {
dev_err(&rdev->dev, "Error updating overcurrent wait %#x\n",
rdev->desc->enable_reg);
}
return ret;
}
/**
* tps65090_try_enable_fet - Try to enable a FET
*
* @rdev: Regulator device
*
* Return: 0 if ok, -ENOTRECOVERABLE if the FET power good bit did not get
* set, or some other -ve value if another error occurred (e.g. i2c error)
*/
static int tps65090_try_enable_fet(struct regulator_dev *rdev)
{
unsigned int control;
int ret, i;
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
rdev->desc->enable_mask);
if (ret < 0) {
dev_err(&rdev->dev, "Error in updating reg %#x\n",
rdev->desc->enable_reg);
return ret;
}
for (i = 0; i < MAX_CTRL_READ_TRIES; i++) {
ret = regmap_read(rdev->regmap, rdev->desc->enable_reg,
&control);
if (ret < 0)
return ret;
if (!(control & BIT(CTRL_TO_BIT)))
break;
usleep_range(1000, 1500);
}
if (!(control & BIT(CTRL_PG_BIT)))
return -ENOTRECOVERABLE;
return 0;
}
/**
* tps65090_fet_enable - Enable a FET, trying a few times if it fails
*
* Some versions of the tps65090 have issues when turning on the FETs.
* This function goes through several steps to ensure the best chance of the
* FET going on. Specifically:
* - We'll make sure that we bump the "overcurrent wait" to the maximum, which
* increases the chances that we'll turn on properly.
* - We'll retry turning the FET on multiple times (turning off in between).
*
* @rdev: Regulator device
*
* Return: 0 if ok, non-zero if it fails.
*/
static int tps65090_fet_enable(struct regulator_dev *rdev)
{
int ret, tries;
/*
* Try enabling multiple times until we succeed since sometimes the
* first try times out.
*/
tries = 0;
while (true) {
ret = tps65090_try_enable_fet(rdev);
if (!ret)
break;
if (ret != -ENOTRECOVERABLE || tries == MAX_FET_ENABLE_TRIES)
goto err;
/* Try turning the FET off (and then on again) */
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, 0);
if (ret)
goto err;
tries++;
}
if (tries)
dev_warn(&rdev->dev, "reg %#x enable ok after %d tries\n",
rdev->desc->enable_reg, tries);
return 0;
err:
dev_warn(&rdev->dev, "reg %#x enable failed\n", rdev->desc->enable_reg);
WARN_ON(1);
return ret;
}
static struct regulator_ops tps65090_reg_control_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
static struct regulator_ops tps65090_fet_control_ops = {
.enable = tps65090_fet_enable,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
static struct regulator_ops tps65090_ldo_ops = {
};
#define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _nvolt, _volt, _ops) \
{ \
.name = "TPS65090_RAILS"#_id, \
.supply_name = _sname, \
.id = TPS65090_REGULATOR_##_id, \
.n_voltages = _nvolt, \
.ops = &_ops, \
.fixed_uV = _volt, \
.enable_reg = _en_reg, \
.enable_val = _en_bits, \
.enable_mask = _en_bits, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
}
#define tps65090_REG_FIXEDV(_id, _sname, en_reg, _en_bits, _volt, _ops) \
tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 1, _volt, _ops)
#define tps65090_REG_SWITCH(_id, _sname, en_reg, _en_bits, _ops) \
tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 0, 0, _ops)
static struct regulator_desc tps65090_regulator_desc[] = {
tps65090_REG_FIXEDV(DCDC1, "vsys1", 0x0C, BIT(CTRL_EN_BIT), 5000000,
tps65090_reg_control_ops),
tps65090_REG_FIXEDV(DCDC2, "vsys2", 0x0D, BIT(CTRL_EN_BIT), 3300000,
tps65090_reg_control_ops),
tps65090_REG_SWITCH(DCDC3, "vsys3", 0x0E, BIT(CTRL_EN_BIT),
tps65090_reg_control_ops),
tps65090_REG_SWITCH(FET1, "infet1", 0x0F,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_SWITCH(FET2, "infet2", 0x10,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_SWITCH(FET3, "infet3", 0x11,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_SWITCH(FET4, "infet4", 0x12,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_SWITCH(FET5, "infet5", 0x13,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_SWITCH(FET6, "infet6", 0x14,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_SWITCH(FET7, "infet7", 0x15,
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
tps65090_fet_control_ops),
tps65090_REG_FIXEDV(LDO1, "vsys-l1", 0, 0, 5000000,
tps65090_ldo_ops),
tps65090_REG_FIXEDV(LDO2, "vsys-l2", 0, 0, 3300000,
tps65090_ldo_ops),
};
static inline bool is_dcdc(int id)
{
switch (id) {
case TPS65090_REGULATOR_DCDC1:
case TPS65090_REGULATOR_DCDC2:
case TPS65090_REGULATOR_DCDC3:
return true;
default:
return false;
}
}
static int tps65090_config_ext_control(
struct tps65090_regulator *ri, bool enable)
{
int ret;
struct device *parent = ri->dev->parent;
unsigned int reg_en_reg = ri->desc->enable_reg;
if (enable)
ret = tps65090_set_bits(parent, reg_en_reg, 1);
else
ret = tps65090_clr_bits(parent, reg_en_reg, 1);
if (ret < 0)
dev_err(ri->dev, "Error in updating reg 0x%x\n", reg_en_reg);
return ret;
}
static int tps65090_regulator_disable_ext_control(
struct tps65090_regulator *ri,
struct tps65090_regulator_plat_data *tps_pdata)
{
int ret = 0;
struct device *parent = ri->dev->parent;
unsigned int reg_en_reg =
|