1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2015 Linaro, Ltd.
* Rob Herring <robh@kernel.org>
*
* Based on vendor driver:
* Copyright (C) 2013 Marvell Inc.
* Author: Chao Xie <xiechao.mail@gmail.com>
*/
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
/* USB PXA1928 PHY mapping */
#define PHY_28NM_PLL_REG0 0x0
#define PHY_28NM_PLL_REG1 0x4
#define PHY_28NM_CAL_REG 0x8
#define PHY_28NM_TX_REG0 0x0c
#define PHY_28NM_TX_REG1 0x10
#define PHY_28NM_RX_REG0 0x14
#define PHY_28NM_RX_REG1 0x18
#define PHY_28NM_DIG_REG0 0x1c
#define PHY_28NM_DIG_REG1 0x20
#define PHY_28NM_TEST_REG0 0x24
#define PHY_28NM_TEST_REG1 0x28
#define PHY_28NM_MOC_REG 0x2c
#define PHY_28NM_PHY_RESERVE 0x30
#define PHY_28NM_OTG_REG 0x34
#define PHY_28NM_CHRG_DET 0x38
#define PHY_28NM_CTRL_REG0 0xc4
#define PHY_28NM_CTRL_REG1 0xc8
#define PHY_28NM_CTRL_REG2 0xd4
#define PHY_28NM_CTRL_REG3 0xdc
/* PHY_28NM_PLL_REG0 */
#define PHY_28NM_PLL_READY BIT(31)
#define PHY_28NM_PLL_SELLPFR_SHIFT 28
#define PHY_28NM_PLL_SELLPFR_MASK (0x3 << 28)
#define PHY_28NM_PLL_FBDIV_SHIFT 16
#define PHY_28NM_PLL_FBDIV_MASK (0x1ff << 16)
#define PHY_28NM_PLL_ICP_SHIFT 8
#define PHY_28NM_PLL_ICP_MASK (0x7 << 8)
#define PHY_28NM_PLL_REFDIV_SHIFT 0
#define PHY_28NM_PLL_REFDIV_MASK 0x7f
/* PHY_28NM_PLL_REG1 */
#define PHY_28NM_PLL_PU_BY_REG BIT(1)
#define PHY_28NM_PLL_PU_PLL BIT(0)
/* PHY_28NM_CAL_REG */
#define PHY_28NM_PLL_PLLCAL_DONE BIT(31)
#define PHY_28NM_PLL_IMPCAL_DONE BIT(23)
#define PHY_28NM_PLL_KVCO_SHIFT 16
#define PHY_28NM_PLL_KVCO_MASK (0x7 << 16)
#define PHY_28NM_PLL_CAL12_SHIFT 20
#define PHY_28NM_PLL_CAL12_MASK (0x3 << 20)
#define PHY_28NM_IMPCAL_VTH_SHIFT 8
#define PHY_28NM_IMPCAL_VTH_MASK (0x7 << 8)
#define PHY_28NM_PLLCAL_START_SHIFT 22
#define PHY_28NM_IMPCAL_START_SHIFT 13
/* PHY_28NM_TX_REG0 */
#define PHY_28NM_TX_PU_BY_REG BIT(25)
#define PHY_28NM_TX_PU_ANA BIT(24)
#define PHY_28NM_TX_AMP_SHIFT 20
#define PHY_28NM_TX_AMP_MASK (0x7 << 20)
/* PHY_28NM_RX_REG0 */
#define PHY_28NM_RX_SQ_THRESH_SHIFT 0
#define PHY_28NM_RX_SQ_THRESH_MASK (0xf << 0)
/* PHY_28NM_RX_REG1 */
#define PHY_28NM_RX_SQCAL_DONE BIT(31)
/* PHY_28NM_DIG_REG0 */
#define PHY_28NM_DIG_BITSTAFFING_ERR BIT(31)
#define PHY_28NM_DIG_SYNC_ERR BIT(30)
#define PHY_28NM_DIG_SQ_FILT_SHIFT 16
#define PHY_28NM_DIG_SQ_FILT_MASK (0x7 << 16)
#define PHY_28NM_DIG_SQ_BLK_SHIFT 12
#define PHY_28NM_DIG_SQ_BLK_MASK (0x7 << 12)
#define PHY_28NM_DIG_SYNC_NUM_SHIFT 0
#define PHY_28NM_DIG_SYNC_NUM_MASK (0x3 << 0)
#define PHY_28NM_PLL_LOCK_BYPASS BIT(7)
/* PHY_28NM_OTG_REG */
#define PHY_28NM_OTG_CONTROL_BY_PIN BIT(5)
#define PHY_28NM_OTG_PU_OTG BIT(4)
#define PHY_28NM_CHGDTC_ENABLE_SWITCH_DM_SHIFT_28 13
#define PHY_28NM_CHGDTC_ENABLE_SWITCH_DP_SHIFT_28 12
#define PHY_28NM_CHGDTC_VSRC_CHARGE_SHIFT_28 10
#define PHY_28NM_CHGDTC_VDAT_CHARGE_SHIFT_28 8
#define PHY_28NM_CHGDTC_CDP_DM_AUTO_SWITCH_SHIFT_28 7
#define PHY_28NM_CHGDTC_DP_DM_SWAP_SHIFT_28 6
#define PHY_28NM_CHGDTC_PU_CHRG_DTC_SHIFT_28 5
#define PHY_28NM_CHGDTC_PD_EN_SHIFT_28 4
#define PHY_28NM_CHGDTC_DCP_EN_SHIFT_28 3
#define PHY_28NM_CHGDTC_CDP_EN_SHIFT_28 2
#define PHY_28NM_CHGDTC_TESTMON_CHRGDTC_SHIFT_28 0
#define PHY_28NM_CTRL1_CHRG_DTC_OUT_SHIFT_28 4
#define PHY_28NM_CTRL1_VBUSDTC_OUT_SHIFT_28 2
#define PHY_28NM_CTRL3_OVERWRITE BIT(0)
#define PHY_28NM_CTRL3_VBUS_VALID BIT(4)
#define PHY_28NM_CTRL3_AVALID BIT(5)
#define PHY_28NM_CTRL3_BVALID BIT(6)
struct mv_usb2_phy {
struct phy *phy;
struct platform_device *pdev;
void __iomem *base;
struct clk *clk;
};
static int wait_for_reg(void __iomem *reg, u32 mask, u32 ms)
{
u32 val;
return readl_poll_timeout(reg, val, ((val & mask) == mask),
1000, 1000 * ms);
}
static int mv_usb2_phy_28nm_init(struct phy *phy)
{
struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
struct platform_device *pdev = mv_phy->pdev;
void __iomem *base = mv_phy->base;
u32 reg;
int ret;
clk_prepare_enable(mv_phy->clk);
/* PHY_28NM_PLL_REG0 */
reg = readl(base + PHY_28NM_PLL_REG0) &
~(PHY_28NM_PLL_SELLPFR_MASK | PHY_28NM_PLL_FBDIV_MASK
| PHY_28NM_PLL_ICP_MASK | PHY_28NM_PLL_REFDIV_MASK);
writel(reg | (0x1 << PHY_28NM_PLL_SELLPFR_SHIFT
| 0xf0 << PHY_28NM_PLL_FBDIV_SHIFT
| 0x3 << PHY_28NM_PLL_ICP_SHIFT
| 0xd << PHY_28NM_PLL_REFDIV_SHIFT),
base + PHY_28NM_PLL_REG0);
/* PHY_28NM_PLL_REG1 */
reg = readl(base + PHY_28NM_PLL_REG1);
writel(reg | PHY_28NM_PLL_PU_PLL | PHY_28NM_PLL_PU_BY_REG,
base + PHY_28NM_PLL_REG1);
/* PHY_28NM_TX_REG0 */
reg = readl(base + PHY_28NM_TX_REG0) & ~PHY_28NM_TX_AMP_MASK;
writel(reg | PHY_28NM_TX_PU_BY_REG | 0x3 << PHY_28NM_TX_AMP_SHIFT |
PHY_28NM_TX_PU_ANA,
base + PHY_28NM_TX_REG0);
/* PHY_28NM_RX_REG0 */
reg = readl(base + PHY_28NM_RX_REG0) & ~PHY_28NM_RX_SQ_THRESH_MASK;
writel(reg | 0xa << PHY_28NM_RX_SQ_THRESH_SHIFT,
base + PHY_28NM_RX_REG0);
/* PHY_28NM_DIG_REG0 */
reg = readl(base + PHY_28NM_DIG_REG0) &
~(PHY_28NM_DIG_BITSTAFFING_ERR | PHY_28NM_DIG_SYNC_ERR |
PHY_28NM_DIG_SQ_FILT_MASK | PHY_28NM_DIG_SQ_BLK_MASK |
PHY_28NM_DIG_SYNC_NUM_MASK);
writel(reg | (0x1 << PHY_28NM_DIG_SYNC_NUM_SHIFT |
PHY_28NM_PLL_LOCK_BYPASS),
base + PHY_28NM_DIG_REG0);
/* PHY_28NM_OTG_REG */
reg = readl(base + PHY_28NM_OTG_REG) | PHY_28NM_OTG_PU_OTG;
writel(reg & ~PHY_28NM_OTG_CONTROL_BY_PIN, base + PHY_28NM_OTG_REG);
/*
* Calibration Timing
* ____________________________
* CAL START ___|
* ____________________
* CAL_DONE ___________|
* | 400us |
*/
/* Make sure PHY Calibration is ready */
ret = wait_for_reg(base + PHY_28NM_CAL_REG,
PHY_28NM_PLL_PLLCAL_DONE | PHY_28NM_PLL_IMPCAL_DONE,
100);
if (ret) {
dev_warn(&pdev->dev, "USB PHY PLL calibrate not done after 100mS.");
goto err_clk;
}
ret = wait_for_reg(base + PHY_28NM_RX_REG1,
PHY_28NM_RX_SQCAL_DONE, 100);
if (ret) {
dev_warn(&pdev->dev, "USB PHY RX SQ calibrate not done after 100mS.");
goto err_clk;
}
/* Make sure PHY PLL is ready */
ret = wait_for_reg(base + PHY_28NM_PLL_REG0, PHY_28NM_PLL_READY, 100);
if (ret) {
dev_warn(&pdev->dev, "PLL_READY not set after 100mS.");
goto err_clk;
}
return 0;
err_clk:
clk_disable_unprepare(mv_phy->clk);
return ret;
}
static int mv_usb2_phy_28nm_power_on(struct phy *phy)
{
struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
void __iomem *base = mv_phy->base;
writel(readl(base + PHY_28NM_CTRL_REG3) |
(PHY_28NM_CTRL3_OVERWRITE | PHY_28NM_CTRL3_VBUS_VALID |
PHY_28NM_CTRL3_AVALID | PHY_28NM_CTRL3_BVALID),
base + PHY_28NM_CTRL_REG3);
return 0;
}
static int mv_usb2_phy_28nm_power_off(struct phy *phy)
{
struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
void __iomem *base = mv_phy->base;
writel(readl(base + PHY_28NM_CTRL_REG3) |
~(PHY_28NM_CTRL3_OVERWRITE | PHY_28NM_CTRL3_VBUS_VALID
| PHY_28NM_CTRL3_AVALID | PHY_28NM_CTRL3_BVALID),
base + PHY_28NM_CTRL_REG3);
return 0;
}
static int mv_usb2_phy_28nm_exit(struct phy *phy)
{
struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
void __iomem *base = mv_phy->base;
unsigned int val;
val = readw(base + PHY_28NM_PLL_REG1);
val &= ~PHY_28NM_PLL_PU_PLL;
writew(val, base + PHY_28NM_PLL_REG1);
/* power down PHY Analog part */
val = readw(base + PHY_28NM_TX_REG0);
val &= ~PHY_28NM_TX_PU_ANA;
writew(val, base + PHY_28NM_TX_REG0);
/* power down PHY OTG part */
val = readw(base + PHY_28NM_OTG_REG);
val &= ~PHY_28NM_OTG_PU_OTG;
writew(val, base + PHY_28NM_OTG_REG);
clk_disable_unprepare(mv_phy->clk);
return 0;
}
static const struct phy_ops usb_ops = {
.init = mv_usb2_phy_28nm_init,
.power_on = mv_usb2_phy_28nm_power_on,
.power_off = mv_usb2_phy_28nm_power_off,
.exit = mv_usb2_phy_28nm_exit,
.owner = THIS_MODULE,
};
static int mv_usb2_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
struct mv_usb2_phy *mv_phy;
struct resource *r;
mv_phy = devm_kzalloc(&pdev->dev, sizeof(*mv_phy), GFP_KERNEL);
if (!mv_phy)
return -ENOMEM;
mv_phy->pdev = pdev;
mv_phy->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(mv_phy->clk)) {
dev_err(&pdev->dev, "failed to get clock.\n");
return PTR_ERR(mv_phy->clk);
}
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mv_phy->base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(mv_phy->base))
return PTR_ERR(mv_phy->base);
mv_phy->phy = devm_phy_create(&pdev->dev, pdev->dev.of_node, &usb_ops);
if (IS_ERR(mv_phy->phy))
return PTR_ERR(mv_phy->phy);
phy_set_drvdata(mv_phy->phy, mv_phy);
phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id mv_usbphy_dt_match[] = {
{ .compatible = "marvell,pxa1928-usb-phy", },
{},
};
MODULE_DEVICE_TABLE(of, mv_usbphy_dt_match);
static struct platform_driver mv_usb2_phy_driver = {
.probe = mv_usb2_phy_probe,
.driver = {
.name = "mv-usb2-phy",
.of_match_table = of_match_ptr(mv_usbphy_dt_match),
},
};
module_platform_driver(mv_usb2_phy_driver);
MODULE_AUTHOR("Rob Herring <robh@kernel.org>");
MODULE_DESCRIPTION("Marvell USB2 phy driver");
MODULE_LICENSE("GPL
|